Latest chemical coating Tenders | Government chemical coating Tenders

Central Government/Public Sector

CTN :39588135

20 Mar, 2025 NA

Multi City - Multi State

Tender For supply of one set of mounting brackets consisting [one set of mounting brackets consisting of 01 mounting bracket per set as per drg. no. le11441 and 01 mounting bracket per set as per le11443. with welding as per rdso guidelines for irsm-41 material and with red oxide zinc chromate primer coating.]

Central Government And Public Sector

CTN :39566607

17 Mar, 2025 14.89 Lacs

Agra - Uttar Pradesh

Tender For emergency repairs to the complex of the itimad-ud-daulla tomb, agra -supply of materials - repair charges for 0.85 m height old m.s. iron grill with whereas required 40x40x6 mm angle iron frame & 10 mm square bar including straightining, cutting, welding etc. including primer & painting etc. complete in all respect. (rate including g.s.t.), fixing charges for old 0.85 m height m.s. iron grill from the boundary wall with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-iii) having size of 2.00 nos post (0.30x0.30x0.30) m including required labour & t&p. etc. (rate including g.s.t.), taking out / removal of fallen brick work in lime mortar old mughal brick manually including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. (rate including g.s.t.), earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (rate including g.s.t.), providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia m.s. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with m.s. tubes, m.s. tube challies, m.s. clamps and m.s. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .the scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of engineerin-charge .the elevational area of the scaffolding shall be measured for payment purpose .the payment will be made once irrespective of duration of scaffolding. (rate including g.s.t.), structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete required for proper completion of work as per direction of engineer incharge. (rate including g.s.t.), providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per is:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineerin-charge. the sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55 mm) with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (rate including g.s.t.), providing and laying in position cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) of specified grade excluding the cost of centering and shuttering. as per direction of engineer-in-charge. (rate including g.s.t.), brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand). (rate including g.s.t.), providing of 12 mm cement plaster on wall of mix : 1:4 (1 cement: 4 fine sand) including labour and material etc. (rate including g.s.t.), supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads &

CTN :39255376

04 Mar, 2025 NA

East Khasi Hills - Meghalaya

Tender For bid to ras supply of pipe 15mm is 1239 , gi pipe 20 mm is 1239 , lakh dana for polish , mirror looking 600 mm l 450mm w with frame pvc , mdf board 8 feet 4 feet 17 mm thickness , ms wire mesh 1mtr wide 15 mtr long , m seal 100 grm , mdf board 8 feet 4 feet 18mm , nails 100mm , nails 25mm , nails 65mm , nails 75mm , plywood commercial type is303 bwr grade 7 ft 3 ft 12mm thick , plywood commercial type bwr grade 8 ft 4ft 18 or 19mm thick , pvc connection pipe 15 mm dia 600 mm long with two nos brass coupling , pvc water storage tank 500ltr 3 layer isi mark , pvc water storage tank 1000ltr 3 layer is mark , plywood one side natural teak face 4mm thick , painting brush 25 mm , painting brush 50 mm , painting brush 75mm , primer red oxide 1 ltr in pack , pvc angle stop cock 15mm dia , pvc connection pipe 15mm dia 450mm long , pvc pipe 50mm dia , pvc rain gutter pipe 180 mm , pvc tank cover lid suitable for 500 or 1000 ltrs tank , pvc waste pipe 32mm , prelaminated particle board l 6 ft w 3 ft thickness18 or 19mm , pvc bip cock 15mm short body , pvc bathroom cabinet of size l 400 mm h 500 mm , pvc float valve with aluminium rod ball 20 mm , pvc low level flushing cistern 5 ltr capacity , red colour powder , raw sienna powder yellow , s s kitchen sink with single bowl l 24 inches w 18 inches , stainless steel kitchen plate rack size l 24 inches w 24 inches d 10 inches , stainless steel kitchen plate rack size l 30inches w 30 inches d 10 inches , stainless steel kitchen plate rack size l 30 inches w 36 inches d 10 inches , stainless steel kitchen plate rack size l 30 inches w 24 d 10 inches , sprit 1 ltr in pack , taflon tape 12mm 10 mtr long , thinner for paint , touch wood , veneered decorative plywood 6mm thick with decorative face veneers on both faces l 8 ft w 4ft , varnish , window glass plain 4mm thick l 3 ft w 4 ft , white cement 1 kg in pack , enamel, synthetic, exterior (a) under coating (b) finishing paint (v3) confirming to is 2932 (q3)

CTN :39255384

04 Mar, 2025 NA

Ri Bhoi - Meghalaya

Tender For bid to ras supply of plug 20 mm dia , gi reducer socket 25mm dia to 20mm dia isi marked , gi socket 15 mm isi mark , gi socket 20 mm isi mark , gi tubing med gde 20mm is 1239 , gi union 25mm , glass self corner 12inch by 12inch thicness 5mm with cp railing , grating cp 100 mm hole , jet spray 1200mm tube dia 15mm cp , kitchen rack ss l 24 inch w 30inch d 10inch , kitchen rack ss superior quality size l 36 inch w 36 inch d 10 inch , kitchen sink 36inch by 18inch by 7inch ss with drain board , knob for side board dressing table writing table etc , laminated sheet or sunmica l 8ft w 4ft thick 1mm , magnetic catcher for cupboard or wardrobe l 30mm w 10mm thick 60mm , melamine high glossy , mirror for dressing table ladies l 48 inch w 18 inch , mirror looking l 20 inch w 16 inch with pvc frame , ms screw wood 35 mm 8 gauge 100 nos in pack , m seal , nails wire steel 100mm , nails wire steel 50mm , nipple gi 15mm dia 2inch long , nipple gi 15 mm dia 4inch long , nipple gi 15mm dia 6inch long , nipple gi 20mm dia 4inch long , nipple gi 20mm dia 6inch long , particle board prelaminated l 2400mm w1200 mm thickness 12mm , pegs alluminium hook 100 mm , pillar cock fancy type 15 mm cp , ply teak face l 8 ft w 4 ft thickness 4 mm , ply wood commercial l 8 w 4 thickness 8mm bwr , ply wood commercial l 8 ft w 4 ft thickness 12mm bwr , plywood l 8 ft w 4 ft thickness19mm bwr , plywood commercial l 7 ft w 3ft thickness 12 mm bwr , ply wood commercial l 8 ft w 4 ft thickness 4 mm , pvc angle cock 15 mm , pvc flush bend 40 mm , pvc pipe 40mm dia 3mtr long , pvc seat and back for chair verandah offrs , pvc seat for chair dining , pvc stop cock internal thread 15mm , pvc tank nipple 20mm , pvc waste coupling 50 mm for stainless steel kitchen sink , red oxide primer 1 ltr in pack , sand paper grit 150mm l 280mm w 230mm , seat and back for chair school , seat cover plastic for ewc white colour , shower rose110mm cp 15 mm , sink mixer wall mounted cp 15mm , stop cock brass 15 mm external thread , stop cock brass 15 mm internal thread , teflon tape white l 1200mm w 12mm , telescopic channel l 10inch w 1point 6inch d point 5inch , thinner pack of 1ltr , touch wood in 1 ltrs pack , union socket 15mm , wall mixer 3 in 1 with l bend 15 mm , waste pipe pvc 32 mm , white cement 1 kg pack , wire mesh gi width 1200mm 15 mtr length 0 point 56 mm nominal dia of wire and average width of aperature 1 point 18mm , wooden beads for fixing glass 2nd class seasoned size 10mm by 10mm , enamel, synthetic, exterior (a) under coating (b) finishing paint (v3) confirming to is 2932 (q3)

CTN :39533965

24 Mar, 2025 NA

Gorakhpur - Haryana

Tender For supply of bracket for mounting of footstep on lhb coaches as per drg no lw11148 alt b or latest upt o the date of tender opening. item to be supplied with red oxide zinc chromate primer coating. [ warrant y period: 30 months after the date of delivery ]

CTN :39533784

26 Mar, 2025 NA

Gorakhpur - Haryana

Tender For supply of angle as per drg no mi006813 alt a or latest upto the date of tender opening. item to be su pplied with red oxide zinc chromate primer coating. [ warranty period: 30 months after the date of deli very ]

Central Government/Public Sector

CTN :39517746

15 Mar, 2025 NA

Singrauli - Madhya Pradesh

Tender For package-a erection, commissioning & trial operation of main circulating cooling water, auxiliary cooling water including application of lining, insulation, supply & painting as and where required including handling of materials at bhel / clients stores / storage yard and transportation to site, and handing over of main circulation cooling water supply and return line from condenser to cooling tower including e&c of bf valve, arvs etc and any other equipment/structure required for the completion of the package, auxiliary cooling water supply line upto a-row of power house along and acw return line branch piping, including supply & installation of items as per boq of 2x800 mw ntpc singrauli stage iii project. package-b erection, commissioning & trial operation of low pressure piping and fire protection system piping including handling at site stores / storage yard, transporting to site, inspection, pre-assembly, erection, alignment, welding, ndt, fixing of hangers & supports, chemical cleaning / pickling, oil flushing, water flushing, hydro testing, surface finish, supply and application of wrapping and coating materials for under ground piping, supply & application of primer & finish paints including labeling & flow direction on the piping & hangers and supports, precommissioning, commissioning, assistance for trial operation of the units & handing over to customer of 2x800 mw ntpc singrauli stage iii project.

CTN :39497687

20 Mar, 2025 NA

Mumbai - Maharashtra

Tender For tender for supply of h p advanced non skid coating for helo flight deck , h p anticorrosive paint for use under non skid coat , paint jotacote universal n10 aluminium , paint jotacote universal n10 grey , safeguard universal es buff , paint seaquantum pro u light red , paint seaquantum pro u dark red , thinner no 07 , balloxy hb light beige jotun , balloxy hb light green jotun , penguard primer , paint seaquantum spectrum black , tankguard hb white , penguard hb grey , penguard hb white , tankguard hb grey , jotun thinner no 17 , paint penguard hb red , jotamastic 87 black jotun , tanguard 412 white , tanguard 412 red , tankguard storge red , jotamastic 87 yellow 2 , af seaforce 90 light red , jotun thinner no 17 , jotun thinner no 7 , pioner topcoat white ral 9016 , tankguard storage light red , jotamastic 87 aluminium aluminium

CTN :39478319

18 Mar, 2025 NA

Mumbai - Maharashtra

Tender For tender for supply of paint finishing (ral 7040) grey , paint finsihing (ral 9011) black , paint polyurethane grey , paint polyurethane red , anti corrosive paint , fresh water tank , anti corrosive paint , avgas/avcat , anticorrosive paint used for acid store battery , h.p. advanced non-skid coating for helo & flight deck , h.p.anticorrosive paint for use under non-skid coat , tie coat for application of tin free spc a/f paints , brown/light red tin free spc a/f paint for u/w application , red brown/darkred tin free spc a/f paint for u/w application , black colour tin free spc a/f paint for boottop application , epoxy based primer for appication in ballast tank , epoxy based anti corr paint for application in ballast tank , anti corrosive llps (grey/bronze) , anti corrosive llps (alluminium) , epoxy thinner , international thinner gta007 , international thinner gta220

Central Government/Public Sector

CTN :39405872

11 Mar, 2025 NA

Chennai - Tamil Nadu

Tender For supply of bracket as per icf drg no. 58111014. note: material as per irsm41-1997 and items to be s upplied with proper red oxide zinc chromate primer coating. [ warranty period: 30 months after the dat e of delivery ]

Chemical Coating Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector