Web Analytics Made Easy - StatCounter

Chipping Gun Tenders

Get complete information related to latest Chipping Gun Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Chipping Gun Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Chipping Gun Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government And Public Sector

CTN :40998744 Due date: 07 Aug, 202507 Aug, 2025 NA
Tender For supply of tungsten carbide tamping tool for pct machines, make-crcc or equivalent, 1 set consisting 16 tools (8+8), as per drawing:- 1. drawing no. - rdso/tm/01a/16(rev-1), crcc part no.- 80264411938 (in ner side fitted tamping tool) = 8 nos. 2. drawing no. -tmd/jhs/tm/pctm/01, crcc part no.- 80264411108 ( outer side fitted tamping tool) = 8 nos. warranty - the life of tctt in a set shall be guaranteed for tamping of minimum 2,50,000 insertions. however min. service life of any one tctt shall not be less than 50,000 in sertions. the warranty shall expire 24 months after the delivery at ultimate destination or 18 months from t he date of fitment on machine, whichever is earlier. supplied materail should fit properly on machine. [ wa rranty period: 24 months after the date of delivery ]

Central Government / Public Sector

CTN :41017886 Due date: 28 Jul, 202528 Jul, 2025 NA
Tender For tungston carbide tamping tool set for mfi m/c, rdso specification no. tm/hm/6/320(rev -3) (1set consisting of following three items with part no. & qty) i) equivalent to plasser part no. cu30.2 743.fri= 4nos. (rdso drg.no rdso/tm/01b/16). ii) equivalent to plasser part no. cu30.6840.fri=4no s. (rdso drg. nordso/tm/01a/16) iii) equivalent to plasser part no. cu30.10840.fri=8nos.(rdso dr g. no-rdso/tm/15a/16) make: plasser or similar, note: the necessary test certificate to be submit ted by supplier along with supply of material. note: material is to be fitted on machine without modific ation. [ warranty period: 24 months after the date of delivery ]

Central Government/Public Sector

CTN :41010881 Due date: 24 Jul, 202524 Jul, 2025 1.49 Lacs
Tender For supply of heavy duty pipe wrench 6 inch , heavy duty pipe wrench 12inch , heavy duty pipe wrench 18inch , heavy duty pipe wrench 24inch , ball peen hammer 500 gm rubber handle , sledge hammer 1kg with wooden handle , divider rivet joint 12inch , tool box cantilever 5 compartment , double ended open spanner set mm pouch , ring spanner set mm pouch , rachet combination spanner set 14mm 15mm 16mm 17mm 18mm 19mm 22mm 24mm , allen key long mm , allen key long inch , drill sleeve mt 4 5 t s , drill sleeve mt 3 5 t s , carbide drill bits 2 16 mm , hss taper shank drill bits 65mm , magnetic retrieving tool , heavy industrial cutter blade , octagonal chisel 9inch , octagonal chisel 6inch , thread sealant 50ml , bearing retainer 50ml , all purpose spray 200 ml , zinc spray 500ml , silicone lubricant grease for o ring 500gm , valve lapping compound 400gm , lever greasing gun long handle with nozzle set , small ratchet set power hand tool kit , pry bar , sledge hammer 500 gm rubber handle , barrel pump

Central Government/Public Sector

CTN :40977690 Due date: 21 Jul, 202521 Jul, 2025 NA
Tender For tender for supply of carbide insert : : - carbide insert , milling insert , milling insert , plunging tool , plunging tool , carbide insert , parallel shank , carbide insert , insert screw , screw key , parallel shank , carbide insert , insert screw , milling cutter , carbide insert , allen key

Central Government And Public Sector

CTN :40977994 Due date: 28 Jul, 202528 Jul, 2025 NA
Tender For supply of ms plate size 16mm , ms plate size 18mm , ms plate size 20mm , ms plate size 28mm , 90 degree ms angle size 25mm , 45 degree ms angle size 25mm , ms hex bolt with nut 12x1.75x40 mm , hex screw m24x3x100 lg, material ss410 , hex screw m24x3x50, material ss410 , hex screw m24x3x125 lg, material ss410 , ss hex bolt with nut 3by8mmx16gx1 inch , ms hex bolt with nut 32x3.5x350 , ss hex bolt with nut 20x2.5x100 , ms hex bolt with nut 12x1.75x35 , ms hex bolt with nut 18x2.5x120 , ss ball valve 1 inch class 150 female thread , ss 90 degree elbow 1 inch , ss 45 degree elbow 1 inch , ss ball valve 1.25 inch class 150 female thread , ss 90 degree elbow 1.25 inch , ss 45 degree elbow 1.25 inch , 1by2 inch ball valve steel , 1by2 inch 90 degree elbow steel , 1by2 inch 45 degree elbow steel , d spanner 18x19 , ring spanner 18x19 , slide wrench 8 , slide wrench 12 , pipe wrench 8 , pipe wrench 12 , 1by2 to 1by4 inch female adapter npt , 1by4 to 1.25 inch ss adapter with 60 degree cone both side , 1by4 to 1by2 inch male adapter npt , 3by4 to 1by2 inch male adapter npt , 3by8 inch female to 1by2 inch male adapter npt , nrv 6 inch check valve , nrv 4 inch check valve , ms union 1by2 inch , ms rod hexagonal 25mm , ms rod hexagonall 40mm, 1.5 inch , 20 inch flange class 300 , brass rod 2 inch , brass rod 1.5 inch , brass rod 2.5 inch , foot valve 3 inch , pvc suction hose pipe 3 inch dia , pvc suction hose pipe 6 inch dia , clamp 4 inch , clamp 6 inch , 1by2 inch x 14 tpi bsp hss round die , o-ring 3mm , o-ring 4mm , o-ring 5.3mm , o-ring 5.7mm , o-ring 6mm , o-ring 8mm , o- ring 8.5mm , o-ring 9mm , rubber gasket sheet size 2mm , rubber gasket sheet size 3 mm , rubber gasket 2.5mm exact , steel putty 3473 , thread locker 263 , si 5900 flange sealant , sealant 495 , super metal composite 1111 , maintain 100 , m seal 75gm , hydraulic sealant 545, 50ml pack , pipe repair kit , sf 790 gasket remover 510 gm , weldon shank 3by4 inch drill bit set 6,8,10,12,16,20 mm , compressor belt size c90 1 34 , filteration plant belt a800, a30 poly f plus , new hp compressor belt 30440903 - 1000015342 , 50 hp blower belt - b3500 b136 , shaper machine belt b56 , auto darkening welding helmet , test hose stauff minimess hose g-1by4 dn4 , elc 50c cover , cutting wheel 4 inch , flap disc 4 inch , buffer wheel ag-4 , abrassive belt with cloth backing, grain- al oxide , cut resistant hand gloves, cut level 4 , die penetration test kit consisting of cleaner, penetrant and developer , filler gauge .02 to 1.00mm, 600mm length , foam-spung for oil soaking 2 inch thick, size- 4 ft x 6ft , plastic can 2 ltr , box spanner 65mm, phosphate finish , bucket 20l , digital vernier caliper , carbide drill bit set 1 to 13mm , tungsten carbide tipped tool for machining , scotch self bonding tape 3.8x9.15x0.075 cubic cm , t30 compressor oil of 5 ltr pack , gland 10mm , taflon tape , ht insulation tape 25mm wide 25m long roll , measuring tape 3 mtr , ss scale of 6inch length , hose wp 700 bar e6 series with coupling set of c604 , marker parmanent type , welding electrode 7018 - 3.15mm , welding electrode 7018 - 4 mm , welding electrode 7018 - 2.50mm , welding electrode 6013 - 3.15mm , welding electrode 6013 - 2.50mm , welding electrode e-308 - 3.15 mm , welding electrode cast iron - 119e size 2.50mm , star coupling rubber buna-n , gasket 2mm non asbestos , caf gasket 3mm thick- non asbestos //bid details 2 / 76

CTN :40566700 Due date: 08 Jul, 202508 Jul, 2025 NA
Tender For bid to ras bid to ras corrigendum : tender for supply of digital clamp meter (600 amp , ) , digital battery tester 13ct 700 , hydro meter , battery pole die +ve , -ve , alternator test bench , 1/4 inch square drive matrix socket set(46 pcs) , multimeter 600v (ac/dc) , refracto meter for def checking 6 in 1 function , alternator regulator tester (vegas) v 414 , safety goggles , torx key set -kth95 (9nos) , distilled water plant (aqua works (3000 watts (5 ltr /hr) , lathe carbide inserts cutting tool for machine steel parts(tnmg 331- maus) , insert cutting tool holder , magnise cnc tools holder(6/7/8/10/12mm lathe boring bar set ccmt carbide insert) , cnc lathe turning tools holder mgehr 1212-2 12x100mm boring bar 10pcs mgmn 200-g carbide inserts high hardness cutter dz10 , cobalt step drill bit spiral size 3mm to 25mm , hss drill bit 1 mm to 6mm 10pcs set , carbide threding inserts gbj-10 pcs 16 erag 60 , carbide threding inserts gbj-10 pcs 16 irag 60 3/8 inch , insert holder(16er ag60 , 16 irag 60 gold) , tap & die (8x1.25mm) , tap & die (10x1.5mm) , tap & die (12x1.5mm) , tap & die (14x1.5mm) , tap & die (16x1.5mm) , tap & die( 18x1.5mm) , tap & die (20x1.5mm) , tap & die (22x2.5mm) , tap & die a nf 1/4 inch , 3/8 inch , 1/2 inch , 5/8 inch , 3/4 inch , 5/16 inch , tap & die bsp 5/16 inch , 3/8 inch , 1/2 inch , 5/8 inch , 3/4 inch , steel rule 24 inch , reamer (adjustable) size- 22mm to 28mm , reamer (adjustable) size- 28mm to 35mm , reamer (adjustable) size- 35mm to 40mm , reamer (adjustable) size- 38mm to 45mm , straight shank drill bit 10.5 , 12 , 12.5 , 14 , 16 , tapper shank drill bit 16mm , 17.5mm , 18mm , 19mm , 20mm , 22mm , 24mm , 32mm , 45mm , marking block magnetic base with dial gauge (for lathe machine) , hss cutting tool size 1/4x100mm , 3/8x100mm , 1/2x100mm , niddle grinder 600w , drill sleeve 1-2 size , drill sleeve 1-2 size , drill sleeve 3-4 size , cutting disc 1.5x100mm , grinding disc 4x100mm , painting brush 2 inch , 4 inch , helmet mask , writing brush , pilot spray gun (cup type) 1 ltr capacity , nozzle tip cleaner (gas cutting nozzle) , spark lighter , angle grinder light duty 600w , anvil heavy duty (akt 25) , hand drill machine heavy duty 750w (size 1 to 30mm) , bench grinder , criclip plier (in side) , criclip plier (out side) , nose plier 10 inch , socket heavy duty 34 mm , socket heavy duty 55 mm , socket heavy duty 60mm , socket heavy duty 65 mm , socket heavy duty 70mm , socket heavy duty 80mm , injector opening box spanner 24 mm , injector opening box spanner 27 mm , allen key set (in inch) , allen key set (mm) , micro mete 0 to 25mm , micro mete 26 to 50 mm , micro mete 51 to 75 mm , micro mete 76 to 100 mm , dial gauge set for inner bore dia checking 02 mm to 200 mm , hyd pressure gauge test kit 100 to 600 bar , diesel engine compression pressure gauge test kit , mechanical jack 30 inch , pipe wrench 12 inch , fip high pressure line removing/fitting spanner 17 no & 19 no , fip opening ring spanner 14x15 & 12x13 , pre stroke tool for all inline/rotary diesel engine , injector testing pipe for fip test bench (600x6x2) , dropping tube for pump testing , fip test bench mini compressor for testing of pressure boost portable , fip gear removal tool for engine , c type ring spanner 10x11mm & 12x13mm , scissors 12 inch , claw hammer 200 gms , hammer 1/2 kg , hammer 1 kg , hammer 5 kg , chisel 6 inch-9 inch , center punch 4mm x 4 inch , adjustable oil filter wrench , light duty socket set , havy duty socket set , single end spanner 17 , 19 for fitting / removing of injecter pipe , hand press machine 50 ton capacity , bench vice 8 inch heavy duty , light duty drill machine , light duty hand grinder , nose plier 12 inch , electric planner 550w , hand drill machine 800w , electric rotary hammer machine 720w

Central Government/Public Sector

CTN :40728848 Due date: 14 Jul, 202514 Jul, 2025 NA
Tender For corrigendum : supply of miscellaneous consumables - hss straight shank drills 0.5 mm dia ground flute drill , hss straight shank drills 1.5 mm dia ground flute drill make addison or equivalent , hss straight shank drills 1.8 mm dia ground flute drill make addison or equivalent , hss straight shank drills 2.0 mm dia ground flute drill make addison or equivalent , hss straight shank drills 2.5 mm dia ground flute drill make addison or equivalent , hss straight shank drills 3.0 mm dia ground flute drill make addison or equivalent , hss straight shank drills dia 3.2 mm ground flute drill make addison or equivalent , hss straight shank drills 3.5 mm dia ground flute drill make addison or equivalent , hss straight shank drills 4.0 mm dia ground flute drill make addison or equivalent , hss straight shank drills size dia 4.4 mm ground flute drill make addision or equivalent , hss straight shank drill size 4.7mm dia make addison or equivalent , hss straight shank drills size dia 5.0 mm ground flute drill make addison or equivalent , hss straight shank drills size dia 6.2 mm make addison or equivalent , hss straight shank drills size dia 8.0 mm ground flute drill make jk or equivalent , hss straight shank drills 10.0mm dia make addison or equivalent , hss straight shank drills size dia 12 mm ground flute drill make addison or equivalent , hss straight shank drill 7.0 mm dia ground flute drill make addison or equivalent , solid carbide straight shank drill dia 1.0 mm ground flute drill with tialn coating make addison or widia or equivalent , solid carbide straight shank drill dia 1.2 mm ground flute drill with tialn coating make addison or widia or equivalent , solid carbide straight shank drill dia 2.0 mm ground flute drill with tialn coating make addison or widia or equivalent , solid carbide straight shank drill dia 3.0 mm ground flute drill with tialn coating make addison or widia or equivalent , solid carbide straight shank drill 4.4 dia make addison or equivalent , solid carbide straight shank drill 4.7 dia make addison or widi or equivalent , solid carbide straight shank drills dia 6.2 mm make addison or widia or equivalent , solid carbide drill bit size 7.0 mm ground drill bit make addison or widia or equivalent , 4.0 carat single point diamond dresser 12mm shank dia 70mm length c grade , precision tool maker vice of screw type with 4 inch jaw opening and 4 vice width , hard end hand number punches 0 to 8 size 2mm make bradma or equivalent , hard end hand letter punches in character size 2 mm a to z make bradma or equivalent , hard end hand number punches set 0 to 8 size 3 mm make bradma or equivalent , hard end hand letter punches in character size 3 mm a to z make bradma or equivalent , slitting saw milling cutters hss 125 x 3.0 x 22 mm make eskent or equivalent , drill jig tooling for making holes for 12.5 mm thick fracture toughness sample as per enclosed drawing m17 454 a3 as per annexure iv , drill jig tooling for making holes for 7.8 mm thick. fracture toughness sample as per enclosed drawing m17 454 a3 as per annexure iv , tap set 1 to 3 for tapping m12 x 1.75 mm pitch make widia or addison or equivalent , tap set 1 3 for tapping m3 x 0.5 mm pitch make addison or widia or equivalent , tap set 1 to 3 for tapping m8 x1 .0 mm pitch make addison or widia or equivalent , tap set 1 to 3 for tapping m5 x 0.8 pitch make addison or widia or equivalent , tap set 1-3 for tapping m4 x 0.7 pitch make addison or widiaor equivalent , tap set 1 to 3 for tapping m8 x 1.25 mm pitch make addison or widia or equivalent , cutting plier 8 make taparia or equivalent , cutting pilers 10 make taparia or equivalent , double ended open jaw spanner 12 and 13 make taparia or equivalent , allen keys set 1 mm to 10mm 10 pieces make taparia or equivalent , allen keys inches 1 or 16inch to 13 or 32inch 10 pieces make taparia or equivalent , long t allen key-6 mm make taparia or equivalent , needle file set assorted set of 12 pcs 160mm long make jk or equ

CTN :40962702 Due date: 25 Jul, 202525 Jul, 2025 NA
Tender For supply of straight wheel silicon carbide for pedrestrial grinding - 200 x 20 x 31.75 course, fine , straight wheel - aluminium oxide - 200 x 20 x 31.75 aa46 by 54k5v8 , lapping paste - course , lapping paste - medium , lapping paste - fine , oil stone - course , oil stone - medium , oil stone - fine , diamond dresser - 1 carat , power hacksaw blade , 400 x 1.6 x 32 mm - 6tpi , hand hacksaw blade - 18tpi , emery paper - 0 , emery paper - 00 , emery paper - 100 , emery paper - 600 , emery paper - 800 , emery paper - 1000 , emery paper - 1200 , hss tool bit size mentioned in tech spec - annex-ii , item sl no-19 , tap extracter set

Central Government/Public Sector

CTN :40962828 Due date: 14 Jul, 202514 Jul, 2025 NA
Tender For supply of tools d d - straight turning tool , iso1 brazed carbide tipped , size 30x30x170 gr.p40 , rh iso-1 , cranked turning & facing brazed tool , size 30x30x170 gr.p40 lh , iso-2 , brazed tools.gr-p40.iso-2 , 25x16x140 rh tip c-16 , cranked turning & facing brazed tool , iso2 , 30x30x170 gr.p40 rh tip c-25 , brazed tools , gr-p40 , iso-2 , 50x32x240 rh , tip-c32 , brazed tool gr.p40 , iso5 50x32x240 lh , tip-c32 , brazed tool gr.p40 , iso6 , 50x32x240 lh , tip-c32 , brazed tool gr.p40 , iso6 , 50x32x240 rh , tip-c32 , cranked internal recessing tool , drg 04-01-010 rh

Central Government/Public Sector

CTN :40957474 Due date: 16 Jul, 202516 Jul, 2025 NA
Tender For tungsten carbide tamping tool set for mfi machines. rdso specification no. tm/hm/6/320( rev-3) (1set consisting of following three items with part no. & qty) i) equivalent to plasser part no. cu30. 2743.fri= 4 nos. (rdso drg.no rdso/tm/01b/16), ii) equivalent to plasser part no. cu30.6840.fri= 4 n os. (rdso drg. no-rdso/tm/01a/16), iii) equivalent to plasser part no. cu30.10840.fri= 8 nos. (rdso d rg. no-rdso/tm/15a/16), detailed specifications as per annexure-i part make: plasser or equivalent, note: the necessary test certificate to be submitted by supplier along with supply of material. note: - ma terial supplied by firm should be fitted on machine without any modifications and all ports & mounting sho uld match as per existing part on machine and all function of item should work successfully. [ warranty p eriod: 30 months after the date of delivery ]
 Loading, Please wait...

Connect us via What's Up