Latest chisel Tenders | Government chisel Tenders

Central Government And Public Sector

CTN :43462443

27 Jan, 2026 45.19 Lacs

Muzaffarnagar - Uttar Pradesh

Tender For supply of material and job work under special repair to restoration and conservation of tomb of saiyed saif khan and his mother majhera muzaffarnagar 2025 2026 - items to be executed, unslaked lime, surkhi, c. sand, gur, belgiri, gum, brick aggregate 20-25 mm, 2nd class brick, kakkar stone, white marble, 65mm thick red sand stone 10 sqm, grey/white sand stone, rr stone, 65mm thick red sand stone 10 sqm (for arch), lakhori brick, tile bricks, mud including top finish, kail wood sleeper, raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of engineer-in-charge., ruled/ flush pointing on white sand stone masonry surface with lime, surkhi and marble dust mortar in the ratio of 1:1.5:1/2 {one lime : 1.5 surkhi (15% dark red and 85% light yellow surkhi) : 1/2 marble dust}. (the rate is inclusive of all materials & labours involved except scaffolding)., demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of engineerin- charge., providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia m.s. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with m.s. tubes, m.s. tube challis, m.s. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. the scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of engineer-in-charge. note:- (1) the elevational area of the scaffolding shall be measured for payment purpose. (2) the payment will be made once only for execution of all items for such works., "earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 all kinds of soil.", surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. 2.28.1 all kinds of soil, "demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. nominal concrete 1:4:8 or leaner mix (including equivalent design mix)", provision for providing & making lime slacking & mortar pit by means of pit excavation, brick masonry & plastering over it. the size of the over all pit is 8.00m x 3.00m & depth is 1.00m. the pit is divided in to three parts & cement plastere, provision for removal of malba for cleaning the sites including collecting, staking and disposal of the rubbish /malba upto 100 meter lead including all the labour and transportation etc complete. out of the monuments premises and further, provision for the purchasing of essential article and t & p for the proper execution of the work i) pvc sheet, ii) pvc pan (tasla), iii) hammer with handle 1kg, iv) iron chisel 4",6", 8", v) pvc bucket, vi) pvc mug, vii)wire & coir brush, viii) wire & coir brush, ix) gum boot pvc in pair, x) pvc pipe 1", xi) wooden handle (fawra, hammer), xii) first aid box with medicine, provision for drawing and documentation charges including inspection of exis

CTN :43486809

17 Jan, 2026 NA

Wardha - Maharashtra

Tender For supply of files flat bastarad 250mm , files flat bastarad 150mm , soldering iron non electric straight 225 , oiler hand lubricating conical , oil stones fine 200 x 50 x 25mm , soldering iron non electric straight 455 , soldering iron electric 230v 75w straight 455 , files flat second cut 150mm , brushes steel wire scratch 40mm , files round smooth 200mm , chisel firmer strong 25mm complete fit , drill twist parellel shank jobber diamet , drill twist parellel shank jobber dia 3mm , drill twist parrellel shank jobber dia 2mm , punches round 2mm , rasp cabinet bastarad cut nominal length , spanner ojde a u electrician midget a f , spanner adjustable single ended open jaw , files flat bastarad 350mm , saws hand cross cutting 650mm , drill twist morse taper shank 23. 50mm , brushes stencil small , brush lacquer squirrel 25mm

Central Government/Public Sector

CTN :43487203

27 Jan, 2026 NA

Hooghly - West Bengal

Tender For supply of aqua guard water purifier , water cooler 40 ltr , geyser 20 liter , water purifier hot and cold 20 liter , inverter set with battery , led tube light 20 watt , led bulb 9 watt , charging led bulb , energy sub meter , single pole mcb 10 amp , copper wire 1. 5 mm , double pole mcb 32 amp , tph 63 amp , fan capacitor 2. 5 mfd , switch 6 amp , switch 16 amp , socket 16 amp , pvc 6 way gang box , pvc 4 way gang box , pvc tape , china black screw 1 and 1 , pvc cable clip 6mm, 8mm, 10mm, 12mm, 14mm , plier , digital multimeter clamp type , pipe wrench 18 , medium size screw driver , wood cutter machine , hammer drill machine , iron cutter machine , spanner set b31 b63 , ball pin hammer 100 gm , hammer 250 gm , chisel 100 mm , welding machine , adjustable wrench , pvc reducer 3 4 by 1 2 , pvc reducer 3 4by 1 , brass tee 3 4by 1 2 , brass elbow 3 4 by 1 2 , pvc socket 1 1 2 , pvc reducer 1 1 2 by 1 , m-seal 90 gram , kacha tape , teflon tape 3 4 , connector pipe , hand flush , pillar cock pvc , pvc tee 1 , overflow valve pvc 1 , pvc water tap , pvc pipe 1 2 , pvc pipe 3 4 , pvc pipe 1 , pvc elbow 1 2 , pvc socket 1 by2 , pvc tee 1by2 , brass tee 1 2 , brass elbow 1 2 , brass fta 1 2 , brass mta 1 2 , pvc ball valve 1 2 , pvc union 3 4 , pvc union 1 , pvc elbow 3 4 , pvc socket 3 4 , pvc elbow 1 , pvc socket 1 , solvent 100 ml ) /bid number: gem/2026/b/7073992 * /dated: 06-01-2026 & & / bid document1 / 54

State Government

CTN :43498765

17 Jan, 2026 NA

Kothamangalam - Kerala

Tender For estimate for the cost of dragging stacking chisel numbering of teak and hardwood in govt timber depot kothamangalam during 26-27

CTN :43501787

29 Jan, 2026 NA

Hyderabad-T - Telangana

Tender For supply of autopsy saw , bone saw , brain matrices , ss trolley , artery forceps 6 inches curved , artery forceps 6 inches straight , mosquito forceps 4 inches curved , right angled forceps 6 inches curved , bp handle size 4 , bp handle size 3 , scissors dissecting metzenbaum 8inches , scissors vascular 7 inches , tissue forceps7 1 oblique 2inches , coagulation forceps , vascular forceps 7 3 oblique 4 inches , needle holder heavy 6.5 inches , needle holder - fine 7.5 inches , anderson adson retractor 8inches , langenbeck retractor 8inches 3 oblique 8 x 1 1 oblique 2 blade , towel clips , nerve hook , bull dog clamps , bowl smal , kidney tray , skin towels , small drape with window , suture needles round bodied , suture needles cutting , silk size 2 to 30cms long pack of 12 , gauze pieces , scissors dissecting metzenbaum heavy , curved clamp 8inches , aortic canula 20f , left ventricular vent 18f angled venous canula , derra partial occlusion clamp 7 , debakey angled clamp 60 degree 18mm jaw length , debakey angled clamp 90 degree , mason clamp 8inches , glover curved clamp right angle 8inches , satinsky vascular clamp 23cm , satinsky vascular clamp 20cm , satinsky vascular clamp 19cm , debakey chest retractor medium size , crile haemostat straight 14 cm , right angled clamps 17cm , demartel angled scissors , tubing clamp 15cm , tubing clamp 20cm , debakey thoracic tissue forceps 24 cm , debakey thoracic tissue forceps 20 cm , vascular forceps 24 cm , vascular forceps 20 cm , volk man retractor 4prongd 8inches , potts scissors 25 degree angle 7 1 oblique 2 inch , potts scissors 60 degree angle 7 1 oblique 2 inch , potts scissors 75 degree angle 7 1 oblique 2 inch , bethune rib shears double curve shafts 14 , periosteal elevator , suction tip , whole body drape with window , side sheet , tube occluding clamp serrated jaws with guard 7inches , venous canula 30 to 32f , bone chisel , surgical hammer high strength , bone cutter 8 inches //bid details 2 / 57

CTN :43501899

19 Jan, 2026 NA

Ferozepur - Punjab

Tender For supply of d-spanner set der 12 , ring spanner set 1812 , oil filter clamp sfw 12 , cutting plier , 903 screw driver , socket set s14mxl , kb4m 9 x ln key , kth 9s ln key , screw driver 938 , screw driver 842 , screw driver 1014 , screw driver 1013 , screw driver 840 , screw driver bs 31 , chisel taparia , nose plier 1441 13 inner , nose plier 1442 13 inner , clamp meter , nose plier 1443 13 inner , nose plier 1444 13 outer , piston ring clamp , screw driver 824 , tea handle , sf4 hammer , magnatic stick , snaf of cutter , hpw 18 pipe wrench , combination spanner set , nose plier 1441 9s inner , nose plier 1443 9s outer , magnatic stand with dial guage , drill bit , stud extractor , bearing puller , tool box , eastman impact driver , kbhi 10 x ln key , tubular set , dw 09 ds spanner , dw 09 ring spanner , lugs crimping tool , mechanical crimping tool , half moon spanner 0810 , half moon spanner 1213 , half moon spanner 1415 , half moon spanner 1617 , 1017 screw driver , digital vernier clipper , bosch impact wrench , 3330 socket set , bosch drill machine with accessories , stanley 46 bit set ) /bid number : gem/2026/b/7090431 * /dated: 08-01-2026 & & / bid document 1 / 35

CTN :43502451

23 Jan, 2026 NA

Osmanabad - Maharashtra

Tender For supply of steel rule , hand gloves , safety shoes , helmet , v block , micrometer outside , vernier caliper , micrometer inside , angle plate , spirit level , file warding , file knife edge , file cut saw , file feather edge , file triangular , file round , file square , file flat , file swiss type , file half round , file hand , card file. , oil stone , pliers combination , blow lamp , spanner , spanner adjustable , box spanner , glass magnifying , clamp toolmaker , clamp c , scraper flat , scraper triangular , scraper half round , chisel , motorized tennon saw , hand hammer , hacksaw , mallets wooden , v-block, files, mallets, screwdrivers, chisels, etc.

CTN :43448209

02 Feb, 2026 12.00 Lacs

Shimla - Himachal Pradesh

Tender For rate agreement regarding the supply of stationery and logistics under various nhm programmes, under cmo shimla - copier paper specification :- a4 size 70 gsm pack of 500 unit :- per pack, copier paper specification :- a4 size 75gsm pack of 500 unit :- per pack, copier paper specification :- legal size 70 gsm pack of 500 unit :- per pack, register specification :- ordinary 100 page unit :- per item , register specification :- ordinary 200 pages unit :- per item , cash book specification :- printed 100 pages unit :- per item , cash book specification :- printed 200 pages unit :- per item , ledger specification :- printed 100 pages unit :- per item , ledger specification :- printed 200 pages unit :- per item , stock register specification :- printed 200 pages unit :- per item , stock register specification :- printed 400 pages unit :- per item , writing pads - normal specification :- 50 sheets - size 18.3 cm x 22.3 cm unit :- per item , writing pads - normal specification :- 100 sheets - size 18.3 cm x 22.3 cm unit :- per item , writing pads - spiral specification :- 100 sheets -a5 size unit :- per item , folder specification :- plastic a4 with button unit :- per item , folder specification :- plastic legal with button unit :- per item , folder specification :- jute-a4 with button zip unit :- per item , folder specification :- jute-legal with button zip unit :- per item , file cover specification :- cardboard unit :- per item , gel pen specification :- blue/ red/ black /green unit :- per item , ballpoint pen specification :- blue/ red/ black /green unit :- per item , pilot pen 0.5mm specification :- blue/ red/ black /green unit :- per item , pilot pen 0.7mm specification :- blue/ red/ black /green unit :- per item , refilling ink of pilot pens specification :- blue/red/green/black unit :- per bottle, highlighter pen specification :- multi-colour, chisel tip, permanent alcohol dye-based non-smudgy unit :- per item , permanent marker specification :- black/red/blue/green unit :- per item , whiteboard marker specification :- black/red/blue/green unit :- per item , file folder specification :- cardboard jute-a4, legal with button zip unit :- per item , pencil specification :- hb (pack of 10, with eraser & sharpener) unit :- per pack , eraser specification :- dust-free - non-sticky & non-smudgy unit :- per item , calculator specification :- 16 digit big display unit :- per item , calculator specification :- 14 digit big display unit :- per item , calculator specification :- 12 digit unit :- per item , staplers specification :- 10no. unit :- per item , staplers specification :- 24/6no. unit :- per item , stapler pin specification :- compatible with 24/6 no. stapler unit :- per pack , stapler pin specification :- compatible with 10 no. stapler unit :- per pack , file tags specification :- large 30 (bunch of 100) unit :- per bunch, file tags specification :- size-6 (bunch of 100) unit :- per bunch, poker specification :- plastic handle unit :- per item , poker specification :- steel handle unit :- per item , punching machine specification :- single punch unit :- per item , pin cushion specification :- standard size unit :- per item , pin steel specification :- pack of 100gm unit :- per pack , stamp pad specification :- size 126*77 mm unit :- per item , scale plastic specification :- 15 cm unit :- per item , scale plastic specification :- 30cm unit :- per item , scale steel specification :- 30cm unit :- per item , scale steel specification :- 60cm unit :- per item , damper specification :- (sponge) with plastic body unit :- per item , envelop a4 pkt specification :- white, 9 4 (pack of 10) unit :- per pack , envelop specification :- white, a3 (pack of 10) unit :- per pack , envelop specification :- white, 8 10 (pack of 10) unit :- per pack , envelop specification :- white, 94 (pack of 10) unit :- per pack , clear plastic tape specification :- transparent, 0.5 inches unit :- per item , clear plastic tape specification :- transparen

CTN :43477620

19 Jan, 2026 NA

Multi City - Multi State

Tender For supply of round shaft chisel.

CTN :43465113

27 Jan, 2026 NA

Mussoorie - Uttarakhand

Tender For supply of tyre size 9.00 x 20 with tube and flap 16 pr rib patterns , tyre size 7.50x16 with tube and flap 16 pr semi lug type patterns , tyre size 235 65r 17 104h tubeless symmetrical type patterns , wheel alloy rim size 235 65r 17 , spare wheel carrier assy , rock breaker chisel diameter 78mm length 806mm

Chisel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

State Government