Latest chock repair Tenders | Government chock repair Tenders

State Government

CTN :44853009

16 Apr, 2026 NA

Manaparai - Tamil Nadu

Tender For corrigendum : supply and installation of lighting protection system for tm5 at tnpl unit ii

State Government

CTN :44830509

30 Apr, 2026 2.00 Lacs

Multi City - Chhattisgarh

Tender For led light 70 watt for substation yard lighting.new generation energy saving and environmental friendly long life led street light made up to of pressure die cast aluminum housing with high efficiency leds as lighting source and lens embedded pc cover having top opening separate driver compartment with ip66 protection and impact resistance of ik07 with is mark.make- havells/philips/bajaj/crompton.

Central Government/Public Sector

CTN :44820280

04 May, 2026 NA

Bengaluru - Karnataka

Tender For corrigendum : 80 watts led flood light luminaire suitable for outdoor applications, having ip-66 or higher protection and designed to operate on single phase ac supply of 140 - 270 volts at 50 hz +/- 5 hz. the luminaire shall be suitable for operation with portable generator sets used at bd accident spots. the luminaire shall have a minimum efficacy of 130 lumens per watt. the working life of led shall be minimum 50,000 hours supported by lm-80 and tm-21 reports. the led luminaire shall conform to is 16107 / iec 62722, exterior lighting fixtures and accessories for floodlight confirming to is 10322 (part 5/section 5) and the led modules shall conform to is 16103 / iec 62717. led luminaires shall also be as per lm-79 and lm-80. the item shall conform to specification no. swr/led light fitting (indoor/outdoor)/001-2016. accepted led makes: osram / philips lumileds / cree / lednium / avago. warranty: 5 years, as per specification no. swr/led light fitting (indoor/outdoor)/001-2016. [ warranty period: 60 months after the date of delivery ]

Central Government And Public Sector

CTN :44807756

22 Apr, 2026 NA

Lumding - Assam

Tender For at hji-design, supply, installation, testing and commissioning of a passenger lift of 14 passengers (952 kg) capacity for g+1 floors (approx. 10 m travel), machine : gearless with permanent magnet motor located in the shaft at the top as per rdso specification no:rdso/2013/em/spec/0016 (rev '2'')-2025, complete with all associated electrical, mechanical and civil interface works and accessories, including 1.0 m/s vvvf drive, automatic centre-opening doors (minimum clear opening 700 - 2000 mm), car height 2400mm, finished floor height 2600 mm, pit depth 1600 mm and headroom 5000 mm; equipped with traction machine suitable for 952 kg load with 8-19s fibre-core self-lubricating ropes, guide rails, buffers and complete hoisting/suspension system; microprocessor-based monoblock control panel with closed-loop control, safety torque-off, automatic rescue device (ard), fireman operation, overload protection, emergency alarm/light and all mandatory safety features as per rdso spec; stainless-steel car with led lighting, ventilation fan, handrail, voice announcement system, vandal-resistant cop & lop with digital indicators; including all cabling, earthing, testing, commissioning, statutory clearances and handing over, along with 2 years comprehensive warranty covering all parts, labour and service. cost includes free maintenance of two years during warranty of lift as per rdso spec no.rdso/2013/em/spec/0016 (rev'2') - 2025 make-johnson/otis/schindler/omega elevators /techno industries or equivalent. [ warranty period: 24 months after the date of delivery ]

Central Government And Public Sector

CTN :44819673

15 Apr, 2026 NA

Katihar - Bihar

Tender For supply, testing & commissioning of complete set of led inflatable tower lights as per ac traction manual and rdso specification, designed for high-intensity illumination during emergency and night-time trd operations, comprising a cylindrical-shaped balloon made of high-strength, waterproof, uv-resistant nylon-based fabric with molded fiberglass top cover and reinforced with internal flexible stiffeners to ensure uniform inflation and structural stability against external wind pressure, fitted with high-efficiency ledlight source of minimum 400w and minimum 44,000 lumens output, powered by an inbuilt portable generator of minimum 0.75 kva capacity, 230v, 1-phase, 50 hz, with 0.8 power factor and engine displacement of minimum 79 cc, capable of providing continuous lighting for minimum 6.5 hours on full load with built-in fuel tank, mounted on a collapsible and transportable frame for easy field deployment, system to include standard electrical protection, user-friendly controls, quick inflation/deflation mechanism, and cable management features, and must be supplied with a minimum 24-month comprehensive warranty; bis certificate. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :44813402

21 Apr, 2026 40.01 Lacs

Multi City - Karnataka

Tender For sub estimate of replacement of utp head regulator electrical cable, providing of drainage gallery lighting facilities, protection work for dg room, & dam embackment reach seepage related works of utp dam for the year 2025-26

Central Government/Public Sector

CTN :44801017

12 May, 2026 NA

Multi City - Multi State

Tender For supply, installation, testing and commissioning (as the case may be) of block proving by axlecounter using block panel and ufsbi for double line operation as per rdso specification no . irs:s-105/2012 (ver.0) with latest amendment. each set consisting of following; (i) universal fail safe block interface complete with all accessories as per sepc. irs:s-104/2012 (ver.0) with attest version and amendment qty-2 nos. (ii) block panel complete with all accessories as per rdso drawing no. rdso/s/32017 for double line (with latest amendment).- qty-02nos. (iii) relay rack with die locking and sealing arrangement as per rsso drg.no. rdso/s/32018 with latest amendment and supplu of all type of relays (iv) block telephone with accessories as per rdso spec. no. rdso/spn/191/2006. qty ? 02 no. with all type lighting protection. (v) automatic media changeover of modems working on redundant channels for data transmission on ofc/ quad-1 pair and secondary modem for ufsbi for use with secondary media ofc/quad-1 pair. or supply, installation, testing and commissioning (as the case may be ) of microprocessor based station master block panel fordouble line block instrument with block telephones as per rdso/ spn/175/2005 and description: (i) microprocessor based station master block panel for double line instrument with block telephones as per rdso/spn/175/2005- version 1 or latest (b) block telephone as per rdso specification no. rdso/spn/191/2005 or latest ? qty-2 nos. (ii) microprocessor based ssbpac (d) block instrument for double line as per rdso /spn/175/2005 version 1 or latest ? qty 2 nos. (iii) lightening and surge protection devices for power line 24v dc,class-c qty. 2 nos. (iv) lightening and surge protection devices data lines class- d qty. 2 nos. (v) supply ofall type of relays? for double line (vi) auto communication changeover units working on redundant channels for data transmission on ofc/quad-1 pair and secondary modem for use with secondary media ofc/quad-1 pair. [ warranty period: 30 months after the date of delivery ]

CTN :44768678

21 Apr, 2026 30.00 Lacs

Osmanabad - Maharashtra

Tender For supply of solar insulation meter , pyranometer , pyrheliometer , lux meter lux meter lcd read out 005 to 7000 lumens with battery , magnetic flux meter 0500 tesla , tong tester clamp meter 0 100 a digital type , soldering iron set 25 watt 65 watt and 120 watt 230 volt set of 3 , temperature controlled soldering iron 50 watt 230 volt , thermometer digital 0 degree c 150 degree c , sun shine recorder , weather monitoring station to monitor and record unshine wind velocity temperature rainfall etc with software , solar cell based sunlight radiation meter for solar power measurement up to 2000 wsquare meter , magnetic compass , cut models of photo voltaic cell assembly , model of lead acid battery , lead acid battery set 12v 40ah 75ah , lead acid battery 12v 100 ah , solar simulator for solar cell characteristic study to study iv curve of a solar cell of minimum 2 watt under variable illumination temperature and suitable load , iv curve tester , sun path finder , solar energy trainer with grouping of solar cells to group series or parallel at least six solar cells each with minimum 2 w with suitable loads , solar tracker demonstrator kit to study manual and automatic control of 10 w solar panel in east west and northsouth andback , halogen lamp set with stand for illumination of solar panels in lab ac mains operated to provide 0 to 1000 watts per meter square , pedestal grinder double ended 300 mm , battery charger 0 6 9 12 24 48 v 30amp , solar photovoltaic module 10 w poly crystalline module , solar photovoltaic module 250 w , solar photovoltaic module 250 w thin film module , solar photovoltaic module 40 w poly crystalline module , solar photovoltaic module 5 w poly crystalline module , solar photovoltaic module 75 w amorphous silicon module , solar photovoltaic module 75 w mono crystalline module , solar panels 250 wp , solar charge controller with dusk to dawn automatic switching 12v 10a , solar charge controller with manual switch day lighting 12 v 10 a , array junction box for connecting 250w x 4 nos solar panel with dc fuse dc mcb and surge suppressor protection , solar lantern led type , solar lantern cfl type , solar lantern assembly sets , home light system 12 v dc with fm receiver led bulb and mobile charger as loads , solar cell kit , clinometer for angle measurement , spirit level for floor level check , anemometer for wind speed measurement , dc table fan 12 v , ac voltmeter mi 0 , providing and supplying of volt meter 0 30v , volt meter 0 100v , ammeter mc 0 1a , ammeter mc 0 5a , ammeter mc centre zero 0 20a , ammeter mc centre zero 050a , power factor meter , rheostat set 0 1 ohm 5 amp 0 10 ohm 5 amp 0 25 ohm 1 amp 0 300 ohm 1 amp set , ac energy meter single phase 10 a 240 v inductiontype , ac energy meter three phase 15 a 440 v induction type , kilo wattmeter analog , digital wattmeter 230 v 1 kw 50 hz , phase sequence indicator 3 phase 415 v , frequency meter 45 to 55 hz , dc led lamp set 3w 5w 10w set of 3 , dc pump 24 v , pwm controller , mppt charge controller , solar grid tied inverter demonstrator kit 300w kw

Central Government/Public Sector

CTN :44736841

17 Apr, 2026 NA

Raigad - Maharashtra

Tender For request of budgetary quote for supply, installation, testing and commissioning of safety circle inside port premises near immigration center 1). signage led screen with metal fabrication support metal fabrication for screen & logo providing and installing branding led circular shape screen, including supply of led display. panel. ms fabrication frame structure with proper support, anchoring and alignment, internal wiring, power supply arrangement, weather protection, testing and commissioning. complete in all respects as per approved design and site requirements. 2). turbine tree 3). fountain providing, supplying, installing. testing and commissioning of 10 nos. 1" foam nozzles with accessories and 16 nos. 12v, 18w underwater rgb led lights. supply and installation of 2 nos. kirloskar brothers limited make 5hp, 440v open well pumps with related fittings. providing and commissioning of 2 nos. electrical control panels with dol starter, elcb and overload protection system. complete upvc astm plumbing inside pond and 150 meters of 0.5 sq.mm x 4 core isi flexible cable for pump and lighting work. 4). mosaic tiles in fountain/pond area 5). providing and fixing mosaic tiles in fountain/pond area, including cleaning and surface preparation, application of waterproof adhesive, proper laying with alignment, epoxy grouting of joints, edge finishing and curing, complete in all respects as per site requirements water proofing providing and applying waterproofing treatment to fountain/pond area, including surface preparation, crack filling, application of approved waterproofing chemical/compound in required coats, curing, and testing for leakage, complete in all respects as per site requirements. 6). light pole providing and erecting metal street light pole of approved height and design, base plate, anchor bolts, internal wiring provision, painting/coating for corrosion protection, and complete installation in all respects as per site requirements. 7). acrylic signage providing and fixing acrylic signage, including laser-cut acrylic letters, uv printing as required, ms frame for support, led backlit provision. proper alignment and mounting, complete in all respects as per approved design and site requirements. 8). rcc work providing and laying rcc slab of m25 grade having thickness 250 mm to 300mm 9). bermuda carpet effect grass with plants providing and executing landscape work including preparation and dressing of soil, supply and plantation of approved shrubs, ornamental plants and trees with manure and watering system, laying of natural/lawn grass with proper leveling and rolling, and decorative pebble work around plants and pathways for aesthetic finish, complete in all respects as per approved layout and site requirements. 10). granite top & wall cladding with required wall & plaster work providing and fixing granite top and wall cladding work, including required surface preparation, necessary wall construction plastering, adhesive fixing, proper alignment, joint filling, edge polishing and finishing. complete in all respects as per approved design and site requirements. 11). electrical lights & points providing, supplying. installing. testing and commissioning of electrical main line including supply and laying of required cables, conduits, distribution connections, and complete wiring for all lights, along with supply of fixtures, fittings, accessories, labour charges and testing, complete in all respects as per site requirements. 12). main line of water supply & return providing, supplying. installing. testing and commissioning of main water supply and return line system, including excavation, supply and laying of approved quality pipes, fittings, valves, joints, supports, connection to pumps/tanks, pressure testing and commissioning, complete in all respects as per site requirements. 13). ss metal logo on top providing and installing 12 feet height ss-(stainless steel) metal revolving logo structure, including

Central Government/Public Sector

CTN :44457697

10 Apr, 2026 9.00 Lacs

Agartala - Tripura

Tender For corrigendum : repair replacement of earth chamber, earth testing point, lighting protection, measurement of earth test results in zone a to d at mil stn agartala

Chock Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors