Latest choke scrap Tenders | Government choke scrap Tenders

CTN :38184725

03 Dec, 2024 NA

Jammu - Jammu And Kashmir

Tender For shifting reinstallation dismantling furnishing and procurement of press material - shiting and reinstallation of digital production machine pro c9110 pro c7110x and pro 8200s , three phase electric fitting of digital section along with all other accessories required along with shifting and reinstallation of 2 number of split ac 1.5 ton , shifting and reinstallation of ups batteries , dismantling of wooden cabinets of urdu dtp section , repair and renovation of aluminium ply board cabinet for digital production machine pro-8300s , furnishing of aluminium partition in new digital section and camera section for ctcp machine and digital machines , wire o wire double of size 16mm , wire o wire double 08mm , hanger 12.5 inch , paper cloth width of 1m , pre gum sheet 80 gsm size 12 inch x 18 inch

corporations/Associations/Others

CTN :37727913

21 Nov, 2024 NA

Srinagar - Jammu And Kashmir

Tender For corrigendum : auction sale of valve guide exhaust,seal valve intake,seal valve exhaust,kit repair bonet cyl,kit repair brake chamber,front leaf no 2,spring leaf,leaf no 1 front,oil pressure guage,wiper arm assy,door handle lh,assy wiper blade (091426) (soft top m&m),assy cable frt parking brake,filter air cleaner,syr ring,set piston ring stud,switch assy,kit rear wheel cyl,canopy& rear curtain assy,window regulator,curtain side assy rh,shim set king pin brg,nipple grease conical head,staering gear box assy,cap fuel tank,oil seal axle shaft,diaphragm assy carburetor (cj3b jeep),shock absorver rear,injector assy,assy filter element (088840) (soft top m&m),gasket roller assy,l t lead & bush (016235),indicator oil pressure,cable parking brake,clutch,half eng assy,eng overhauled kit,bty non rechargable,head phone assy,pointer staff mk-i,plotting board map large,cover earphone handset djl 11212,torch hand electric 3 cells,cable electrical lpt 11 1a,cable wrc46,ab-288 antenna machine unit,bty secondry portable sealed ni cd 14.4v,eye guard,cable assy special purpose 19 pin to 6,pressure plate

State Government

CTN :38121172

20 Nov, 2024 NA

Nalanda - Bihar

Tender For procurement of material for the schemes of zila parishad, nalanda. - course book, magazine, fictions and nonfiction books, competitive books, novels, newspapers, comics, story telling books, biograghy and autobiograpy books, books, lrature book, drilling of borewell 300mm/250mm dia, moon climber, circular swing, 4 way dancing see saw, troo slider (gi sheet), mankey climber, swing two teater, rocking boat, parrallel bar, mgr, monitor, keyboard, mouse, printer, ups, scaner, epu, pendriive, projector, wooden laminated/aluminium modem, door/window, calling fan, led bulb, r.d. (drinking water), 15 watt led bulb, 6 to 32 amp sp mcb, 1200 mm sweep celling fan, 400 mm, 230 volt, ac exhalist fan, 381 mm, 280 volt, ac exhaust fan, 400 mm, 230 volt, ac wall/cabing fan, stablizer, 5 hp motor, 3 hp motoi, regulator, electric pvc pipe, electric five pin socket, electric two pin socket, electric five pin plug, electric two pin plug, tube light, batten, 100 mm x 100 mm x 60 mm deep pvc/metal, box, 75 mm x 75 mm x 60 mm deep pvc/metal box, 16 amp socket, fan regulator 2 module, piano fan regulator 01 module, ??? db 4 way, switch, board, installation charge, electric wire, 2 hp motor, 1.5 hp motor, 3hp statrter, 2hp statrter, 1.5 hp statrter, adapter, submersible wire, mcb control pannel, street light, high mass pole with bracket 50 watt hd light, iot device, ac 2 tone, ac steplizer, starter repair, submersible repair/new, stabilizer repair/new, pa mixer amplifier ssb-120, pa mixer amplifier cma-5400, chairman unit cmc-5100, delight unit cmd-5200, pa wall speaker asx-3128t, awm-7200u2 microphone, 15 mtr. mic wire falcon, speaker cable falcon coil 90mtr., cassette ac 3.8 tone, cassette ac 2.0 tone, copper pipe, drain pipe, four copper wire, choki stand, book self, chair, study table, news paper stand, bench, desk, office table, black board, pvc carpet, steel almirah, foldable wheel chair, battery box, steel rack, dining table, tea table, floor carpeting, visitor chair, fiber chair, 3 seater bench, high mask pole (bottom, thickness, base plate, foundation bolt, battery box, arm), lithium battery, 50 watt led, 150 watt solar panel, hire charge of air compressor machine, hire charge of boring machine, pcc cutting machine, ms angle, ms channel, ms clamp 20 mm, ms clamp 63 mm, clamp d, ms patti, ms pipe 50 mm, tank clamp, colour seat 10' x 48", colour seat 12' x 48", colour seat 14" x 48, angle rack, library table, false celling (with material), flooring (with material), paint and putty (with material), venner with glossy polish (with material), wall paneling (with material), cupboard (mr ply) (with material), furniture repairing work (with material), wall paneling louvers work (with material), sofa (with material), upvc window (with material), pvc wall paper (with material), parda (with material), pvc wall pilling, stone notice board size 2.5feet 2feet &, 2feet*1.5feet, bench, desk, office table, black board, pvc carpet, steel almirah, foldable wheel chair, battery box, steel rack, dining table, tea table, floor carpeting, visitor chair, fiber chair, 3 seater bench, high mask pole (bottom, thickness, base plate, foundation bolt, battery box, arm), lithium battery, 50 watt led, 150 watt solar panel, hire charge of air compressor machine, hire charge of boring machine, pcc cutting machine, ms angle, ms channel, ms clamp 20 mm, ms clamp 63 mm, clamp d, ms patti, ms pipe 50 mm, tank clamp, colour seat 10' x 48", colour seat 12' x 48", colour seat 14" x 48, angle rack, library table, false celling (with material), flooring (with material), paint and putty (with material), venner with glossy polish (with material), wall paneling (with material), cupboard (mr ply) (with material), furniture repairing work (with material), wall paneling louvers work (with material), sofa (with material), upvc window (with material), pvc wall paper (with material), parda (with material), pvc wall pilling, stone notice board size 2.5feet 2feet &, 2feet*1.5feet, white

Central Government/Public Sector

CTN :37963382

16 Nov, 2024 29.00 Lacs

Secunderabad - Telangana

Tender For corrigendum : repair and maintenance to lt electric supply and connected works at afs hakimpet under ge (af) hakimpet - note:-1. the contractor should visit the site before quoting the tender to know the working condition of the station.2. all requisite safely measures are to be adopted by contractor on site.3. the contractor shall provide and deploy sufficient electrician (as approved by ge / engineer in charge) shall report at 9:00 hrs to je e/m / engineer in charge to collect the complaints job card in working days and complete the same completed within 24 hrs.4. the complaints shall be rectified within 24 hrs if the complaints is/are not attended / not completed within 24 hrs (except repair/replacement of major items) recovery will be done at rs 500 per complaint per day.5. for major parts like replacement of mcb, dbs, mccbs etc should be rectified within 3 working days, if the contractor not rectify within time then recovery will be done at rs 1000 per complaint per day.6. after completion of job work complaint, the contractor has to produce job card duly signed by user & je / engineer in charge.7. if contractor failed to provide their electrician to attend the complains then recovery will be done at rs 1000 per day.8. the contractor should procure minimum 50% of the materials for all items as per boq (other than paints) mentioned in this ca, within 20 days after getting sample approval and kept in safe custody so that no delay in work due to non-availability of materials will be faced. contractor should ensure during the cause of work that he has minimum 25% of materials with him till the completion of work. if contractor fail to complete the work within contract due to lack of fittings a penalty of 20% shall be applicable on quoted rates by the contractor.9. in repair works, rate quoted for demolition /dismantling /taking down is deemed to be inclusive of removing the same from site and station.10. in maintenance works, the contractor should maintain separate registers for repair works. day to day complaints should be noted in those registers with si nos of complaints, location qty of work, status of complaints and signature of in charge and stamp of the office. formal will be given from concern age office. the contractor should obtain the signature of in charge on the same day of work. these register to be submitted to je (e/m) on every weekend without fail.11. the contracts involving working at elevated locations of buildings, contractor should ensure proper safety arrangements as per norms. wearing safety belts and helmets are mandatory. a penalty of rs 1000 per day will be recovered from contractor if safety norms are not followed.12. after completion of work, no stores/debris/ loose items be kept at work site or dumped inside station . entire area to be cleared and waste material be taken outside from the station ., excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth and getting in hard/dense soil for laying of cables/ for erection of poles/ for stay assembly etc complete all as specified and directed by engineer-in-charge., boaring/ drilling (horizontally ) of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including hdpe pipe of 80 mm dia suitable for 0.4 mpa working pressure. all as specified and directed by engineer in charge.., supply and spread clean dry river sand in trenches for cushioning of cable complete all as specified and directed by engineer-in-charge. (note: punned down thickness only shall be measured for the purpose of payment), supply and fix precast concrete cable covers class lv type 1, flat size 250 x 150 x 40 mm m-20 grade concrete laid dry for cable protection complete all as specified and directed., returning, filling in trenches including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed by engineer-in-charge., removing surpl

CTN :38151647

29 Nov, 2024 NA

Srinagar - Jammu And Kashmir

Tender For supply of side cutting plier , cutting plier 150 mm , wire cutter , glue gun with sticks , l n key set , screw driver set , tool kit small , electric screw drv set , vehicle washing spray machine , repair of 10 ton jack incl change of kits , repair of controller card of servo voltage stabilizer 30 kva

Central Government/Public Sector

CTN :38117686

19 Nov, 2024 NA

Jammu - Jammu And Kashmir

Tender For supply of ellen key set , file flat smooth 12 inch , file flat 12 inch , flat file 12 inch for tyre tube repair , file half round 12 inch , oil can , hammer 250 grm , hammer 500 grm , hammer cross pin 100 gms and 250 gms , hammer 03 kg , screw driver 4 inch , screw driver 6 inch , screw driver 2 in 1 , screw driver kit auto electrician , screw driver big 12 inch , tool box lock with key , oil filter wrench for all types of vehicles , filler gauge 0.05 mm to 01 mm , socket set with rods 8 mm to 32 mm socket with complete attachments , adjustable wrench 300 mm , centre punch 150 mm , creepers , socket clutch nut motor cycle tvs , tappet adjuster motor cycle tvs , clutch holder motor cycle tvs , open ring spanner brake motor cycle tvs , hydrometer , battery quick charger with accessories and stand elak fc 30 24 , insulation rubber sheet for table and ground , digital multi meter with ac dc amp tester , hand saw size 15 inch and 18 inch arie , pincer jamour , bosch gh06500 electric planner , wooden chisel size 1 inch , bosch gws 600 angel grinder , tri square 06 inch and 12 inch , iron planer 07 inch 10 inch and 14 inch , drill bit set , combination cutting pliers 8 inch , tyre lever set h d , air pipe line nozzle , air pipe line for air impact gun , air impact gun socket set for light vehicle , tube hot puncher machine , tub tank for checking puncture of tubes , nose plier 8 inch , pipe wrench 18 inch , chisel set assorted size , hand drill machine with handle bosch hvy , welding hand gloves leather , welding goggles black and white helmet full face cover , goggle white , sunny 10 inch and 14 inch sandasi , c clamp 12 inch , arc welding holder brass heavy duty , writing brush assorted size 0 no to 12 no long hair , spray painting gun pilot 1 liter size , face mask , bosch sander machine no gex 125 1ae random orbital sander , hand painting brush half inch to 2 inch , measuring tape 15 mtrs , measuring tape steel 5 mtrs , scissor 10 inch , tape plastic 150 cm

CTN :38078351

19 Nov, 2024 NA

Mumbai - Maharashtra

Tender For s i t and c of horizontal life line systems on workshops and building rooftop - horizontal life line systems for module shop , horizontal life line systems for p and a shop south yard , horizontal life line systems for f1 shed , horizontal life line systems for f2 shed , horizontal life line systems for rigging and joiner , horizontal life line systems for north yard assembly shop , horizontal life line systems for pickling shop , horizontal life line systems for pipe shop , horizontal life line systems for machine and fitting shop , horizontal life line systems for paint shop , horizontal life line systems for sheet metal shop , horizontal life line systems for maintanace shop south yard , horizontal life line systems for maintanace shop , horizontal life line systems for credit society , horizontal life line systems for main canteen , horizontal life line systems for cisf control room , horizontal life line systems for common stock store , horizontal life line systems for new line store , horizontal life line systems for shore integration facility , horizontal life line systems for electric repair shop , horizontal life line systems for shipbuilding engineering utility shed , horizontal life line systems for temporary lighting , horizontal life line systems for nhava yard production workshop , horizontal life line systems for nhava yard csif shed , horizontal life line systems for nhava yard administration office , horizontal life line systems for nhava yard power house

CTN :38050900

16 Nov, 2024 NA

Jammu - Jammu And Kashmir

Tender For supply of ladder repair , electric work , split air conditioner repair , furniture repair , polishing of table , repair of security door , window air conditioner repair , repair of stablizer , fibre sheet , repair of lights , repair of water pump , repair of tv , grass cutting machine repair

Choke Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

Central Government/Public Sector

Central Government/Public Sector