Latest chrome vanadium Tenders | Government chrome vanadium Tenders

Central Government/Public Sector

CTN :40010421

09 May, 2025 NA

Jhansi - Uttar Pradesh

Tender For jhansi division -bsz-gtm- ctr (p) - 36.51 tkm & jhansi division -gtm-bzm ctr (p) - 32.23 tkm-ns item :- a) running track site:- replacement of old sleepers and rails (ctr) by dismantling existing track of all types of sleepers by making 13m loose rail panel (or any suitable length panel) with existing sleepers & sh rail (for removing existing track) with wider base sleepers/revised wider base sleepers at density of 1660 sleepers per km assembled with loose rail panel (or any suitable rail length panel of sh rail) in pqrs depot and placing over ballast properly during traffic block after removing panels of old sleeper and sh rail of 13 m loose rail panel (or any suitable length panel) wth the use of contractor's pqrs machine by providing auxilary track with gauge of 3400mm (either with the use of existing rail from existing track or with new rail unloaded by contractor from eur in block as instructed by sse/p-way, (if required) over metal/ wooden sleepers, to be provided by railway, 500 nos./rail km on both rails at the interval of 2m) and providing fish plates for joining loose sh rail over wider base sleeper for continuity of track and maintaining track parameters as per para 522 of irpwm 2020 to keep the track fit for 30kmph. sh rail over new wider base sleepers/revised wider base sleepers to be replaced with newlearlier existing rail on running track (with replacement of rutbber pad, liner & greased erc and greasing of liner contract area. grease to be used should be of 'o' graphite grease as per s code 408). as soon as loose rail length of track reaches 500m/750nm (as per decision of railway site engineer ie. sseje/ p-way), loading of track panel (sh rail over old normal sleeper and tied with erc) of approximately 13 m length over railway wagons and unloading of track panels of the length of 13 m (or any suitable length) and wider base sleepers/revised wider base sleepers will be done during traffic block. trr with the rail of the length of 250 m to 500m (preferably 20rail panel) will have to be done as soon as track of loose rail exceeds 500m length. further the contractor wil follow instructions of sse/p-way to relax speed of track upto maximum speed of section as per schedule laid down in irpwm 2020 para 708 for machine tamping with all machine packing related works such as recoupment of crib ballast, shoulder ballast, boxing and dressing. the whole process wil continue ill completion of work. auxilary track (at) will have to be removed with advancement of ctr work as per direction of railway (sse/jeip-way). b) pqrs depot: track panel with sh rail of 13 m or any suitable length over wider base sleepers/revised wider base sleepers/revised wider base sleepers will be made with necessary fittings in pqrs depot. loading of these panels over railway wagons and unloading of released track panels (released from running track) consisting of all types of rails & sleepers from railway wagon at pqrs depot using contractor's own portal crane including dismantling and stacking each component of track properly at designated locations. (note: this item of complete track renewal with wider base sleeper is a composite item and all activities as required will have to be done by the contractor with his/her own pqrs machine & other machines, tools and plants including all other resources as per requirement of the work (in pqrs depot and during traffic block in running tack). ralway will provide wagons and locomotives free of cost for loading/unloading and transportation tofrom pors depot/work site (running track) for loose rail panels with normal old sleepers and with wider base sleepers/revised wider base sleepers. nothing extra will be paid except the rates as mentioned against the item. raiway will also provide metal/wooden sleepers required for at, free of cost. various activities which are involved in ctr work are elaborated in "sequence of activities provided with tender schedule." (unit- per track km.).

Central Government/Public Sector

CTN :40011782

18 Apr, 2025 1.57 Lacs

Bhandara - Maharashtra

Tender For procurement of electrical tools for electrical department at dongri buzurg mine - complete electrical tool kit 1) double sided screw driver 6"- inos, 2) double sided screw driver 8"-1nos 3) double sided screw driver 10"-1nos, 4) neon tester- 1 nos 5) ring spanner set-6 to 32 mm-1 set 6) de spanner set-6 to 32 mm-1 set 7) hollow spanner set 6 to 32mm-1 set 8) allenkey spanner set-1-1/2 mm to 10 mm-1 set 9) combinationplier-8"-1 nos, 10) long nose plier-8"-1 nos 11) adjustable hacksaw frame-inos 12) adjustable spanner-8"-1 nos 13) 600a clamp meter - 1 nos 14) 600v digital multimeter-1 nos 15) cable cutter knife-1 nos 16) universal wire stripper 7"-1 nos 17) tool bag heavy duty - 1 nos make bosch, taparia guaranty and warranty - 1 years , hss drill bit set 1-13mm make bosch, taparia and equilent guaranty and warranty 1 years , drill bit set for concrete make bosch, taparia and equilent guaranty and warranty 1 years , drill machine 600w rpm: 3000, drill attachment, reverse rotation, variable speed, make bosch, taparia guaranty and warranty 1 years , rotary hammer drill machine power-720w, 230v ac, rpm: 0-4800, tool holder sds plus, make bosch, taparia and equilent , guaranty and warranty 1 years angle grinder make , power-970w, make bosch and equilent guaranty and warranty 1 years universal bearing puller , pipe wrench 14" make bosch, taparia and equilent guaranty and warranty 1 years , pipe wrench 18" make bosch, taparia and equilent , guaranty and warranty 1 years vacuum cleaner wet and dry power-1000w, 20 ltr, stainless steel container, 2 , mtr. section hose, filter bag guaranty and warranty 1 years , cordless blower bosch with rechargeable wind volume: 120m3/min, rpm: 17000 , battery: 18v, with charger make: bosch and equilent warranty 1 years , electrical blower 600w air flow: 2.8m3/min rpm: 0-13000 make: bosch and equilent guaranty and warranty 1 years

Central Government/Public Sector

CTN :40010375

14 May, 2025 NA

Ankleshwar - Gujarat

Tender For auction of used tools , equipments , machinery , furniture , auto items , raw material , etc.

State Government

CTN :39978061

17 Apr, 2025 12.00 Lacs

Anuppur - Madhya Pradesh

Tender For items supply for nrlm project at bijapur - saw machine 42 mm/18 inch, lathe machine small, with beat, rinda machine multipurpose, table saw cutter, compressor machine medium size, with gun, kharda machine, with motor, jixa cutter 6 inch, jixa cutter blade 6 inch, table saw drill, blower machine opel, router machine dayuri, grinder khaitan 4" 1200 w, press grinder machine makita, drill machine 12 mm, cutter machine dongchaeng, small rinda machine makita, welding machine small, hamber machine 12 mm, welding rod, rinda leaf, saw machine blade, drill beat 1 to 12 arpoxset, router beat, small cutter blade, chain saw blade, small clamp, small clamp, big clamp, hammer, plas, patsy 1,2,3,4, basula , jambura , carbin tools , kanashi 4,5 inch , saw 12, 16, 18 inch , seal , inch tape , guniya , sand file 8, 10, 12 inch , fevicol , feviquick , press grounder machine sheet 60, 80, 100, 120, 150 , screw 35/5, 1/2, 1 inch , mela maid 10 litre , sealer 10 litre , nc thinner 10 litre , star beat 2 inch , kheela 2,3 inch, in kg , kheela 20 no. in kg , sand material 60, 80, 100, 120, 150 , tool box new

State Government

CTN :39996284

17 Apr, 2025 66.0 Thousand

Coochbehar - West Bengal

Tender For purchase of waste bin and other tools and equipment for swm unit including operation cost under putimari i gram panchayat

Central Government/Public Sector

CTN :40004320

03 May, 2025 NA

Narsinghpur - Madhya Pradesh

Tender For tender for supply of hand tools for mechanical maintenance - pipe wrench , 12in(300mm) , pipe wrench , heavy duty , 600mm , side cutting plier , insulated , 200mm , nose plier , insulated , 6in , hammer , double face sledge , 3.61-3.8kg , chisel , cold flat , 200x20mm , chisel , cold cross cut , 150x10mm , ring spanner , slogging , 70mm , ring spanner , slogging , 80mm , ring spanner , slogging , 85mm , ring spanner , slogging , 90mm , ring spanner , slogging , 95mm , ring spanner , slogging , 100mm , ring spanner , slogging , 105mm , spanner , slogging ring , alloy , 75mm , ring spanner , slogging , cr-v stl , 95mm , open end spanner , slogging , 100mm , spanner , slogging ring , dhs , alloy , 85mm , wrench , slogging open , open jaw , alloy , 61mm , spanner , slogging ring , dhs , alloy , 61mm , spanner , so , open jaw , alloy , 68mm , spanner , slogging ring , dhs , alloy , 68mm , wrench , so , open jaw , alloy , ph , 72mm , spanner , slogging ring , dhs , alloy , 72mm , open jaw wrench , slogging , 76mm , spanner , slogging ring , dhs , alloy , 76mm , wrench , so , open jaw , alloy , 77mm , spanner , slogging ring , alloy , 77mm , spanner , slogging ring , dhs , alloy , 78mm , wrench , so , open jaw , alloy , 78mm , spanner , slogging ring , dhs , alloy , 86mm , wrench , so , open jaw , alloy , 86mm , wrench , so , open jaw , alloy , 112mm , spanner , slogging ring , dhs , alloy , 112mm , wrench , pipe , is 4508 , 36 , spanner , adjustable , 18 , plier , flat nose , alloy steel , 6 , chisel , flat , 18 , 25mm , allen key set , 1-27mm , allen key set , 1/16-3/8mm , 1/2sq hex socket set , ext. circlip plier , straight nose , 7 inch , int. circlip plier , straight nose , 7 inch , open jaw spanner , double ended , 30x32mm

Central Government/Public Sector

CTN :39999760

26 Apr, 2025 NA

Haridwar - Uttarakhand

Tender For supply of stte electrical and mechanical - 1). "tool for fuse regulator box as per p/n.457680023" 2). " tool for encoder regulation as per p/n.457610035" 3). "extension lead for sw mfcb as per p/n.187673013" 4). "extension lead for sw smf as p er p/n.se7036" 5). "siac command equipment as per p/n.436333010" 6). "dummy round, proximity fuse te sting as per p/n 137697515" 7). "vulcano ber dummy round (inert ammunition fitted with vulcan o ber electronic as per p/n 15 7697026" 8). "vulcano glr dummy round rf civ ilian gps (inert ammunition fi tted with vulcano glr electron ic as per p/n 157697027" 9). "3ap dummy fuze as per p/n 4754 60011" 10). "adapter for 4ap dummy fuze as per p/n 136201100" 11). "tool to test stabilized transm itter platform as per p/n 4363 10010" 12). "dummy cartridge as per p/n 137697461" 13). "solenoid test benchas per p/n 437618017/02" 14). "cpu brushless test equipmentas per p/n 116921001" 15). "motor driver test bench el./tr . gearboxes as per p/n 1129200 21" 16). "dummy da scivolata (dummy for sliding test) as per p/n 437602012/04" 17). sae as per p/n 457610029 18). "ac3 console pcb bench as per p /n 457610040" 19). "talyvel electronic gauge level las per p/n 137697151" 20). "motor pump assembly test bench as per p/n 427618010/10" 21). "fcs simulatoras per p/n 45 7620039" 22). "switch/sniffer 8 doors + sniff er as per p/n.100010779" 23). "vulcano ammunition reader as per p/n 4374401011" 24). "4ap fuze ammunition reader as per p/n 475844001" 25). "4ap dummy fuze as per p/n 4758 10014" 26). "optical unit to detect the bli nd arc of the ship as per p/n 157697435" 27). "pc laptop equipped with all sw tools necessary for the integration / debug of any failure as per p/n 457680336" 28). "on board spare parts and tools for 76 sr mf strales configur ationas per list provided by m /s lds vide email dated 29 jul y 2022"

Central Government/Public Sector

CTN :39999753

21 Apr, 2025 NA

Bengaluru - Karnataka

Tender For rate contract for supply of crimping tools and accessories for a period of 02 years as per rfq.

CTN :40004646

05 May, 2025 NA

Kolkata - West Bengal

Tender For supply of sewage treatment plant and vacuum toilet system for yard - stp with vacuum toilet system_321000000013_2121 , wc-white vitreous china- with accesories_321006000018_2121 , 20 tph sewage discharge pump_321000000014_2121 , obs for stp and vts_321000760065_2121 , tools for stp and vts_321000770006_2121 , documentation for stp and vts_321000810013_2121 , instl and comm spares for stp and vts_321000820005_2121 , training for stp and vts_ser10640_2121 , service of engineers_ser10641_2121 , warranty extension charge for 1st year_2121 , warranty extension charge for 2nd year_2121

CTN :40004547

03 May, 2025 NA

Bangalore - Karnataka

Tender For supply of stg tools - thread checking plug gauge m17 x 1 go and no go , thread checking plug gauge m20 x 1 go and no go , thread checking ring gauge m20 x 1 go and no go , id threading shank 5ir-009-k11-c16-t-35 , threading insert - 60 2ir 2.5 - 150- vtx , thread checking plug gauge go and no go m5 x 0.8 - 5h , thread checking ring gauge go and no go m42 x 1.5 -4h , hss thread cutting tap set m42 x 1 5 - 5h , thread checking plug gauge go and no go m42 x 1 5 - 5h , thread checking plug gauge go and no go m42 x 1 5 - 6h , thread checking plug gauge go and no go m56 x 1 5 - 6g

Chrome Vanadium Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors