Latest ci pipes Tenders | Government ci pipes Tenders

Central Government/Public Sector

CTN :41247815

06 Aug, 2025 47.95 Lacs

Mathura - Uttar Pradesh

Tender For providing and laying cpvc pipeline network, masonry chamber or brick work and plaster work, laying and jointing ci pipes with existing pipeline, cc paver blocks and other miscellaneous work

corporations/Associations/Others

CTN :41241137

02 Aug, 2025 NA

Surat - Gujarat

Tender For supply on different sizes of ci / di pipes, a program to check the water pipes and find the exact location of leakage and stagnant water in the areas of subzone no. 02 to subzone-05 of south west (seventh) zone, on t.p. road and on the internal roads of the society,

CTN :41222196

11 Aug, 2025 14.33 Lacs

Multi City - Andhra Pradesh

Tender For replacement of 80mm dia ci inlet and outlet pipes with 150mm dia ms pipe, repair and paintings of ms ladder and 100kl elsr at kurmannapalem vuda phase-iii in ward no. 86 of gvmc

Central Government/Public Sector

CTN :40899943

01 Aug, 2025 41.00 Lacs

Imphal - Manipur

Tender For corrigendum : repair/maint of ci/di and gi pipes of different sizes including repairs/replacement of sluice valves, air release valve and valve, gate valves, valve chamber pits at upper leimakhong at lms.

State Government

CTN :41189579

12 Aug, 2025 8.09 Lacs

West Tripura - Tripura

Tender For maintenance of mi scheme under belbari rd block during the year 2025-26/sh_ - repair _ maintenance of pump-motor, suction-delivery _ electrical accessories etc. (job no. tr/34/minor works/wrd-i/2025-26) - dismentling of pump for over hauling including greasing, gland packing, necessary repairs & reinstallation of the same including trial run for 10 hrs. in two spell complete as per direction of the engineer-in-charge.i) for li, supply & fitting fixing ball bearing of approved quality for pump required during overhauling.i) 6306 ball bearing (tata /skf), providing & fitting fixing shaft sleeve bush of approved quality.i) for li (cast iron), providing & fitting fixing shaft sleeve nut of approved quality.i) cast iron (ci), providing & fitting fixing c.i. gland of approved quality.i) for li, providing & fitting fixing c.i coupling complete with nuts & bolts of approved quality.i) 150 mm dia, providing & fitting fixing coupling nuts & bolts (all size)of approved quality.i) for li, providing & fitting fixing coupling rubber bush (all size)of approved quality. i) for li, providing & fitting fixing coupling star bush (all size) of approved quality.i) 150 mm dia, providing & fitting fixing pump shaft of approved quality., supplying and fitting fixing of asbestos rope of best quality as per direciton of engineer-in-charge. i) 6mm to 8mm thick, ii) 10 to 12 mm thick, providing & fitting fixing casing ring of approved quality.i) 150 mm dia (10 mm thick), supplying and fitting fixing of pump cooling pipe of best quality as per direciton of engineer-in-charge., providing & fitting fixing lantern ring for pump of approved quality., supplying and greasing/applying of grease of approved quality as per direction of engineer-in-charge., providing and fixing g.i. bend /elbow in the pipe line including testing of joints complete as per cpwd specification and direction of the engineer - in - charge. a) 150 mm dia, providing & fitting fixing shaft sleeve nut of approved quality. (cast iron), providing & fitting fixing of g.i. flange ( 10 mm wall thickness ) by welding with g.i. / ms pipe and placing position as per specification and the direction of the engineer-in- charge.i) 150 mm dia, providing & fitting fixing gland nut / stag nut 100 mm long for gland of approved quality.i) for li, providing and fitting fixing m.s. clamp for hose pipes with nuts & bolts complete as per relevant is specification anddirection of engineer-in-charge.i) 150mm dia, providing & fitting fixing rubber flange washer 6 mm thick at site of work of approved quality.i)150 mm dia, providing and fitting fixing ms foot valve as per relevant is specification and the direction of the engineer-in-charge.. i) 150 mm dia, providing & fitting fixing c.i tail piece of approved quality at site of work.i) 150 mm dia, providing & fitting fixing foot valve leather washer (6 mm thick) of heavy duty at site of work of approved quality.i) 150 mm dia, providing & fitting fixing c.i foot valve spare parts of 125/150 mm dia at site of work of approved quality.a) c.i foot valve weight, b) c.i foot valve ring, c) c.i foot valve net, dismantling of motor fpr vernishing heating etc cpmplete in/c reinstalltion and trail run for two spell complete as per direction of the engineer-in charge., supplying & fitting fixing of spare parts for 20/25 hp horizontal motor.a) motor fan, b) terminal plate, providing and fitting fixing of fully automatic star delta type motor starter ( 3 ph. 50 hz, 415v, 25hp /18.50 kw relay range within 17-25 ) in steel sheet enclosures with contractors and timer etc. complete suitable for motor pump havells/l & t/bch make direction of the engineer-in-charge.i) 25hp/18.5kw relay range within 13-21 +10%, providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for din fuses). triple pole with neutral link ( tpn ) , 415/500 volt complete as per direction of the engi

State Government

CTN :41196560

14 Aug, 2025 17.99 Lacs

Jamnagar - Gujarat

Tender For supply of various size of ms erw pipes,ci gate valves & non return valves with companion flange & fasteners for fire and service water lines for workshop section at sikka tps.

State Government

CTN :41175074

30 Jul, 2025 NA

Delhi - Delhi

Tender For repairing of damaged enm equipments at tube well no nt 148 at shank no 17 d point palla area ward no 5 baktawakpur ac 01 - lifting of p/set by the help of chain pully, clamps and heavy men menpower after cuting rusted/wornout and opening of nut bolts to dismental the p/set, pipes, valves etc., s/o submersible cable with copper conductor having three core sizes 6 sq. mm working on 1100v. make:-finolex/plaza/unistar or any other make approved by djb., making and supply of ms clamp of 500 mm long x 75 width x 12 mm thick complete with nut and bolts and washers for holding the 100 mm dia pipe including bending and shaping etc. as required., s/o ci/m.s bend 100 mm dia 90deg. double flange. heavy class make: - ganesh/ isi, s/o of 3 mtr. gi pipe 100 mm dia size ,medium class with gi flange welded in both sides 3 mtr long with ms strips complete with threading work on each side of pipe each flange should be 4 holes and cut for cables. make :- jindal / tata., s/o g.i required off size threaded heavy duty nut-bolts of good quality., supply of ms bore cover 4 mm thick suitable for bore size in 2 pieces complete with bolting arrangement angle iron frame and provision of 100 mm dia hole in the center., s/o pressure gauge of 100 mm dia, 0-30 psi complete with socket, bush make:-h-guru/fiebig, making water sample point with the help of socket, niple, cook valve, tee and extended pipe etc. of size 1/2 inch., making and supply of g.i tail piece of 100 mm dia. , one mtr. long size made out of medium class pipe complete with one end threaded and other end fitted with g.i. flange heavy and cut for submersible cable. mak of pipe - jindal/tata., repairing of starter panel board suitable for 20 hp submersible pump set having following works :- 1. replace faulty power contacts.2. replace faulty relays.3. monir wiring work.4. repalce faulty push button and indication lamp.5. painting of panel board., supply of neoprene rubber sheet having 50% neoprene , 3 mm thick make jyoti/worth/djb approved, installation of all e&m equipments, lowering pump set into the bore all piping work fixing of valves and accessories executing minor civil works, making electrical connections with cable as required size by the help of chain pully to lower pump sets testing and commissioning of all e&m equipments at no load and full load conditions as per standard from full satisfaction of engineer-in-charge. the job also includes the transportation charges, providing/fixing of required gap piece, for fixing valves, pressure gauge with the help of welding machine etc. note- the repaired pset will be provide by the departmentlly; if required.

Central Government/Public Sector

CTN :41185962

13 Aug, 2025 98.60 Lacs

Shillong - Meghalaya

Tender For tender for supply of provision of individual intensity control for runway threshold and end lights at shillong airport : : - supply of 1 x 6 sq. mm 5 kv grade single core. (refer item no.1 of boq page no.1) , supply of 5 kv grade 6 sq. mm size plug and receptacle. (refer item no.2 of boq page no.1) , supply of 50 mm size hdpe pipe. (refer item no.3 of boq page no.1) , supply of medium class gi pipes 40 mm. (refer item no.4 of boq page no.1) , supply of following size of xlpe insulated pvc sheathed aluminum conductor armored power cable of 1.1 kv. (refer item no.5 of boq page no.1) , supplying and making end termination with double brass compression gland and aluminium lugs. (refer item no.6 of boq page no.1) , supplying and making end termination with double brass compression gland and aluminium lugs. (refer item no.7 of boq page no.1) , supplying and making cable route marker with cement concrete. (refer item no.8 of boq page no.2) , making field connections by crimping upto 6 sq.mm plug and receptacle. (refer item no.9 of boq page no.2) , laying of following size hdpe pipe of size upto 90 mm isi marked along with existing accessories. (refer item no.10 of boq page no.2) , laying of the following size hdpe pipe of size upto 90 mm isi marked. (refer item no.11 of boq page no.2) , laying of one number pvc insulated & pvc sheathed armoured aluminium cable. (refer item no.12 of boq page no.2) , laying of one number pvc insulated and pvc sheathed. (refer item no.13 of boq page no.2) , laying of following size dia. medium b class gi pipe. (refer item no.14 of boq page no.2) , laying and fixing of one number pvc insulated. (refer item no.15 of boq page no.3) , laying and fixing of one number pvc insulated and pvc sheathed. (refer item no.16 of boq page no.3) , providing and laying 6 swg gi wire in the trench. (refer item no.17 of boq page no.3) , earthing with gi earth pipe 4.5 m long and 40mm dia. (refer item no.18 of boq page no.3) , supply of ci transformer housing box. (refer item no.19 of boq page no.3) , installation of transformer housing box. (refer item no.20 of boq page no.3) , sitc of indoor type air cooled constant current regulator. (refer item no.21 of boq page no.4) , sitc of indoor type air cooled constant current regulator. (refer item no.22 of boq page no.4) , integration of threshold and end lights circuits with the existing alcms panel. (refer item no.23 of boq page no.4) , design manufacturing supply installation testing and commissioning of lt panel. (refer item no.24 of boq page no.5)

CTN :41151246

02 Aug, 2025 5.63 Lacs

Shikaripura - Karnataka

Tender For supply of required materials for construction of sanjeevini shed at saluru gp shikaripura taluk shivamogga district - rcc ring 0.90 m dia(sgp sk), rcc concrete cap 1.00 m dia(sgp sk), pvc pipes 10kgf / sqcm 90mm outer dia(sgp sk), chlorinated polyvinyl - chloride (cpvc) pipe 25 mm outer dia(sgp sk), lead or pvc connection pipe 32mm dia (for wash basin)(sgp sk), c.i. / m.s. brackets for flushing cistern(sgp sk), brass stop cock(sgp sk), cp brass waste 32 mm of standard pattern(sgp sk), cp brass chain with plug(sgp sk), copper plated brass piller tap 15mm(sgp sk), white vitreous china clay flat back wash basin size 550x400mm(sgp sk), g.i. overflow pipe 20mm dia(sgp sk), black plastic seat with lid as specified(sgp sk), white glazed/viterous china clay 10lts low lwvwl flushingcistern, with fittings and brackets and 40 mm white c.p. flush pipe(sgp sk), european type water classet of specific make(sgp sk), corbon electrodes(sgp sk), anchor bolts 750mm(sgp sk), base plate / base plate(sgp sk), gusset plates 6 mm thick(sgp sk), ms angle iron 40mm x 40mm x 6mm, 23 mtr in length at 3.5 kg per mtr(sgp sk), ms angle iron 50mm x 50mm x 6mm 33.8 mtr in length at4.5 kg per mtr (sgp sk), polyenthylene water storage tank of specified capacity l(sgp sk), enamel paint(sgp sk), plastic emulsion paint(sgp sk), border tiles 30 x 10 cms(sgp sk), glazed tiles 300x450(sgp sk), white cement(sgp sk), ceramic tiles of size 30 x 30 cms(sgp sk), sal wood (white)(sgp sk), enamel metal paint(sgp sk), ready mix primer paint (ready mix red lead paint)(sgp sk), ms flat(sgp sk), m.s rods(sgp sk), thick plain glass 5.50 mm (sgp sk), chrominum plated screws(sgp sk), cleat angles(sgp sk), alluminium handles - 15 mm(sgp sk), alluminium tower bolt - 20 cm(sgp sk), pvc edge beading(sgp sk), rubber beading for shutters beading(sgp sk), aluminium window frame section 1.20 mm thick(sgp sk), honnewood planks for panels 20 mm thick(sgp sk), honne wood(sgp sk), vitrified tiles 600x600 mm(sgp sk), solid concrete block (40x 15 x 20 cms)- 5.00 n/sqmm(sgp sk), burnt bricks class 35 (non modular)(sgp sk), jungle wood runners and planks(sgp sk), casurina poles 75 - 100 mm dia(sgp sk), casurina poles 100 - 150 mm(sgp sk), silver oak or equivalent planks 38 mm thick(sgp sk), stone at quarry(sgp sk), boulders(sgp sk), bond stone 20 x 20 x 45 cm(sgp sk), size stone 20 x 20 x 25 cms(sgp sk), binding wire(sgp sk), tmt bars fe 500(sgp sk), plasticizer / super plasticizer(sgp sk), portland cement(sgp sk), coarse sand (zone iii)(sgp sk), broken stone aggregate 12 mm to 10 mm size(sgp sk), broken stone aggregate 20 mm size(sgp sk), broken stone aggregate 40 mm size(sgp sk)

Central Government/Public Sector

CTN :40927919

30 Jul, 2025 25.00 Lacs

Imphal - Manipur

Tender For corrigendum : repair/maint of ci/di and gi pipes of different sizes including repairs/replacement of sluice valves, air release valve and valve, gate valves, valve chamber pits at lower leimakhong and koirengei.

Ci Pipes Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors