Latest civil engineering service Tenders | Government civil engineering service Tenders

State Government

CTN :45459035

15 Jun, 2026 5.52 Lacs

South Tripura - Tripura

Tender For running and maintenance of dtw schemes under dws sub-division, karbook/ sh- lifitng and lowering of different capacity burn/disorder submerssible pump-motor sets alongwith column assembly and all accessories from the existing dtw etc. and other related work

State Government

CTN :45398927

12 Jun, 2026 29.65 Lacs

Malappuram - Kerala

Tender For pcc work for foundation bed for column footing. rcc work for column footing and shuttering work for foundation steel work for stair work . m.s tube and stainless steel handrail work for stair.

CTN :45176504

12 Jun, 2026 NA

Tawang - Arunachal Pradesh

Tender For corrigendum : supply of rcc column , foundation , total column height 12.5 m from ground , ms chequered platform at height of 5 meter , ms chequered platform at height of 10 mtr , launching platform at 10 meter , over shed cover at top platform , ms laddar slope type with railing , all slithering platform to have safety grills on all three sides , loading area with brick work and loose sand filling , rock climbing surface, single face height 40 feet width min 8 feet , crash mat size 3mx2x30cm mattress for safety with cover , slithering rope 10mm dynamic climbing , slithering gloves , seat harness full size , carabiners , helmt

CTN :45470090

16 Jun, 2026 16.00 Lacs

Delhi - Delhi

Tender For supply of aluminium fabricated toughened glass wall , false ceiling work , flooring with glazed vitrified tiles , excavation in trenches as required for column work , brick work , aluminium fabricated toughened glass door double leaf , led light for false ceiling , ac hot and cold split 2 ton , electrical work with switch and socket , jhummar

CTN :45451265

19 Jun, 2026 NA

Budgam - Jammu And Kashmir

Tender For tender for supply of truss - the principle rafter and the bottom chord shall be fabricated out of rectangular steel hollow sections of size 96mm x 48 mmx 4.00 mm (8.22 kg/rm) , partition truss - the principle rafter and the bottom chord shall be fabricated out of rectangular steel hollow sections of size 96mm x 48 mmx 4.00 mm (8.22 kg/rm) , main column of rhs 122 x 61 x 3.6 mm 9.67 kgs per rm , side column for steel door of rhs 122 x 61 x 3.6 mm (9.67 kgs per rm) , 2.825m length each , runner front and back side length 3660mm , runner partition or gable end length 6100mm , runner front and back door sides length 2450mm , purlin of rectangular steel hollow sections of size 96mm x 48 mm x 4.0 mm (8.22 kg per rm) with 6mm thick , ms extension purlin shall be of 450mm long fabricated out of rectangular steel hollow sections , 1400 x 450mm for door. , ms sunshade with sheet 0.63mm thick 1400 x 450mm for door. , ms sunshade with sheet 0.63mm thick 1500 x 450mm for window , top runner shs 45x45x2.9 mm steel sections , ms sheet top and bottom u channel 3000mm length , false ceiling supporting angle ms 65x65x5 mm , for wall pre-painted gi both sides , tongue and groove , for ceiling- pre-painted gi both sides , tongue and groove , ppgi outer corner flashing 200x200x3050mm , door flashing of size 100x100x2700mm , door flashing of size 100x100x1500mm , window flashing of size 50x50x1100mm , ppgi ridge cover 450x450x3050mm , ppgi inner corner flashing 100x100x2700mm , (colour white) , ppgi inner corner ceiling flashing 50x50x3000mm (l shaped) , ppgi camouflage roof sheet 4000x1060mm x 0.63mm , ppgi camouflage wall cladding sheet 3050x1060mm x 0.63mm , ppgi camouflage for inner partition wall cladding sheet , polycarbonate roof sheet 4000mmx1060mm x 3 mm , ppgi camouflage for gable wall cladding sheet 3000x1060mm x 0.63mm , ms foundation bolt 16x450mm , ms nut and bolt 12 x 40 mm , ms nut and bolt 12 x 100 mm , ms nut and bolt 16 x 50 mm (connect of truss and purlins) , ms nut and bolt 10x75 and washer for fixing of sunshed , gi self tapping screw 75mm (for fixing panel with coln) , gi self tapping screw 25mm (for fixing of inner flasing) , gi self tapping screw 50mm (for fixing of roof sheet) , double shutter steel doors will be provided in each store shelter as shown in the drawing. , windows in each shelter will be provided. window size will be 1.20m x 1.20 m with two vertical panels , one insulated puf door shutter with aluminium frame of suitable size shall be provided complete with pressed steel or u-channel frame , one fixed glass window of size 2.00m wide x 1.20m high shall be provided complete with ms frame , necessary cleats , rubber beading and transparent glass of minimum 5mm thickness , padlock with 7 levers 50mm , with 3 nos spare key. , silicon sealant 280 ml , manufacturing sand (m- sand) confirming to is 383-2016 , crushed stone sand category. , stone aggregate to be crushed rock or gravel 20mm graded conforming to is 383-2016 , stone aggregate to be crushed rock or gravel 40mm graded conforming to is 383-2016 , common burnt clay building bricks sub class b modular size designation 75kgf per cm2 , best locally available with sharp corners , non skid ceramic tiles of size 400 x 400 x 7-8mm conforming to is 15622 2017 , glass dividing strips 40x4mm , prefabricated foundation reinforcement type f-2 made of 12 mm & 10 mm for steel as main bars and 8 mm dia deformed bars as in stirrups us as per drawings , steel form work -type -2 -steel form work material for columns of size 0.3 x 0.3 x 0.9m and columns footing of size 0.9 x 0.9 x 0.3 m ( type f-2) made out of 3mm thick ms sheet , lightning conductor confirming to is - 3043 - 2018 with all accessories , pvc ceiling rose 2 or 3 terminal. , led tube light fitting complete 4 feet long 18 watt tube rod and electronic ballast , xlpe insulated pvc seathed (heavy duty) armoured multi core cable 16 sqmm 2 core aluminum conductor for working voltage up to and including 1100 volt ,

CTN :45442671

19 Jun, 2026 10.00 Lacs

Palakkad - Kerala

Tender For material supply for works in mgnregs action plan - material supply for mgnregs individual and common asset creation - stone aggregate:40mm nominal size, stone aggregate:20mm nominal size, stone aggregate:10mm nominal size, stone aggregate:06mm nominal size, course sand(zone3), portland cement, concrete mixer, vibrator, stone for masonry work, twisted steel/deformed bars, structural steel such as tees,angles,channels and r.s joists, second class kail wood in planks, second class kail wood in scantling, wall form panel 1250*450mm, corner angle 45*45*5mm 2.5long, column clamp 450*1070mm, prop 2m(2-3.5m), laterate stone of size 40*20*15cm, solid block of size 30*20*15cm, mild steel plates, mild steel rivets, flats up to 10mm in thickness, 20 mm dia.holding down bolts, mild steel sheets for tanks, galvanised wire mesh, iron pintels including welded pin, mild steel sheets with bolts and nuts, mild steel hooks, gi trafford profile sheet 0.35mm thick, galvanised steel jor l hooks 8 mm dia, galvanised steel bolts and nuts 6mm dia and 25mm long round head with slots, wire nails, fine sand, pvc pipe 63 mm outer dia., pvc bend 63 mm dia., pvc pipe 110mm outer dia., pvc elbow 63 mm dia, pvc tee 63*63*63 mm dia, pvc end cap 63 mm dia, pvc reducer 63*50mm dia, pvc pipe 160mm outer dia., gi pipes 50 mm dia., gi pipes 40 mm dia, quarry waste, precoated galvanised plain ridge, vitrified floor tile 60*60cm, welding by electric plant, hire charge of 10hp engine and pump set, diesel oil, 200 mm aluminium aldop, pvc socket/coupling 63 mm dia, polythene water storage tank, red oxide zinc chromate primer, deharadun white lime, smooth wheeled roller 8 to 10 tonne, water tanker 5 to 6 kl capacity, interlocking c.c. paver block (80 mm thick, m-30), sundries

corporations/Associations/Others

CTN :45430815

18 Jun, 2026 NA

Nagarcoil - Tamil Nadu

Tender For nagercoil corporation dismantling old damaged water tank and construction of column with sintex tank arrangement at vellalar keezha theru, vanigar street and swd maintenance work in vellalar keezha theru at ward no.12

Central Government/Public Sector

CTN :45461262

25 Jun, 2026 35.00 Lacs

Allahabad - Uttar Pradesh

Tender For repair maintenance to column pipe of borewell fittings and allied work at af stn bamrauli under ge af bamrauli

State Government

CTN :45441605

11 Jun, 2026 NA

Khaperkheda - Maharashtra

Tender For work of structural strenghtening related to structure of acw, cw & tg column at 500 mw, tps khaperkheda.

State Government

CTN :45431139

12 Jun, 2026 1.39 Lacs

Attingal - Kerala

Tender For state plan-state plan 2025-2026-procurements of equipments for wtps-supply and installation of water quality testing equipments at wtps under ws section 1 attingal-general civil work-general civil work - purchase of jar test apparatus, od229090/2025-2026:supply and installation of the jar test apparatus must meet the following specifications. no. of. stirrers -6 minimum, rpm- 25 to 200 rpm or better, capacity of single stirrer unit-, control—digital control (digital timer & rpm counter), stirrer paddle material (with appropriate corrosion protective coating) - stainless steel, power single phase (220 - 240 volts), illumination—fluorescent tube such that illumination should not contribute heat to the system and entire equipment must have a minimum warranty period of two years, purchase of ph meter, od229087/2025-2026:supply and installation of bench top ph meter must with the following specifications: (a) regarding ph: the range must be between 0.00 to 14.00 ph or better, the resolution 0.01 or better, the accuracy 0.02 ph or better, the calibration points should be atleast 3 points, buffer option should be suitable for standard buffers. (b) regarding mv: range 0 to 1999 mv, resolution 1 mv or better, accuracy mv or better (c) regarding temperature: range 0.0 to 99 degrees celsius or better, resolution should be 0.1 degrees celsius or better, and accuracy of 0.5 degrees celsius or better. (d) the electrode of the ph meter must be a single junction, body plastic/unbreakable material, gel-filled electrode, and atc probe, and the electrode stand should also be provided by the supplier. (e) ph meter must also have lcd/led display, a dual display of ph or mv with temperature, with auto buffer recognition, offset/slope should be displayed, power 230v 10%, must provide a minimum of 100 ml of buffer solutions of ph 7.0, ph 4.0, and ph 9.2. the supplier must provide all accessories for smooth functioning of the equipment and a hard copy of the user manual with instrument specifications. the ph meter must have a minimum warranty of one year for the meter and a minimum of six months for the electrode. the calibration at the time of the installation must be done by the supplier., purchase of conductivity-tds meter, od229088/2025-2026:supply and installation of conductivity - tds meter with conductivity range of at least 0.1 s to100 ms, resolution : 0.001 s and tds range of 0.1 ppm to 100 ppt , temperature : 0 degree celsius to 1000 degree celsius (auto / manual), readout : 7 digits led (3 digits for temp. and 4 digits for cond./tds), printer interface for 80 column d.m. printer with minimum one year warranty

Civil Engineering Service Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

corporations/Associations/Others

Central Government/Public Sector

State Government

State Government