Latest clamp roller Tenders | Government clamp roller Tenders

Central Government/Public Sector

CTN :38208057

23 Nov, 2024 NA

Dahod - Gujarat

Tender For supply of earth discharge rod assembly for 25kv ac traction to be supplied along with two rail clamps, top clamp (10mm to 20mm dia conductor) and cable 9 meter (7.5 +1.5)m long with size:248/0.45mm and canvas bag as per rdso specn. no: eti/ohe/51(9/87) rev-1 (oct-92) or latest. specn: eti/ohe/51(9/87) re v-1 (oct-92) or latest. [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :38196194

19 Nov, 2024 1.21 Crore

Hyderabad - Telangana

Tender For installation, commissioning of 15,500 nos. new led streetlights along with maintenance for a period of 8 months and supply & installation of 8000 nos. pipes and clamps sets in greater hyderabad municipal corporation

Central Government/Public Sector

CTN :38208384

05 Dec, 2024 NA

Dhanera - Gujarat

Tender For supply of earthing discharge rod (high rise) complete with copper extension and clamps as per rdso drg. no. eti/ohe/51(9/87)(rev.-1)suitable for 25kv high rise ohe working overall length not less than 6.7 mtr and 4 equal pieces of insulated pipes. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38005126

18 Nov, 2024 45.72 Lacs

Mundra - Gujarat

Tender For corrigendum : provn of 02 in nos bore wells alongwith associated items at icgs mundra - material and labour for drilling of 02 nos pilot/trial bore by direct rotary rig method including all t&p through any kind of starta (soil, kankar, boulder or soft or hard rock) down up to 150 m depth below ground level by using suitable drill bit according to levering of casing pipe including the cost of mud pit, channels, etc and disposal of soil obtained to a distance not exc. 1 km away complete all as specified. note:- (i) the drilling shall be continued up to specified depth and in case sticky clay occurs in between the drilling must be stopped and hydrologist of gws & sb shall be contacted & eggr-in-charge shall be informed.(ii)cost of this consultant shall be borne by contractor (iii) taking the samples from the bore well cutting for every 3 meter interval and every change in strata if less than 3meter. (iv) preparation of litho logs based on these samples.(v) drill time log to be prepared and prescribed., (vi) aquifer performance tests at constant discharge with draw down and recovery reading.(vii) after completion of pilot bore, the contractor shall have to arrange for electro eater logging test of each bore.(viii) contractor have also produced bore well water test report for drinking water parameters before levering of motor and pump.(note:- if water quality not found fit for domestic purpose use then all other connected items of trial bore will not be executed.) , supply assembling, jointing, lowering and fixing in the bore hole pvc casing pipe of nominal dia 315 mm (medium well) ,10 kg/cm2 working pressure, confirming to is 4985-2000 including providing pea gravel of 8 mm to 4.6mm size for packing around the casing/slotted pipe in bore well all as specified and directed. make: astral/ashirwad/ajay/sfmc, all as per item no 2.00 above but slotted pipe. , supply, assembling, jointing, lowering lead free pvc column pipes of nominal dia 65 mm, od 75 mm (min), non toxic, pressure 16 kg/cm2 with and including top and bottom adaptor (ss) and accessories like epdm ring and double ss stud all as spd and directed by engineer-in-charge. make: astral/ashirwad/ajay/sfmc, development of tube well with compressed air by means of air compressor of suitable capacity not less than 300 cfm and over pumping using suitable capacity pump to make available water free from turbidity complete all as specified and directed by engineer-in-charge., m & l for conducting yield test for the bore well by continuously pumping for 24 hours by using a submersible pump set to determine safe pumping yield and produced water test report of samples which is collect every hour complete as directed by the engineer-in-charge. [ all arrangements for yield test shall be made by contractor and cost for the same borne by contractor ], supply and fix ms reducer, bail plug, top cover made of 3mm thick ms plate for bore well in two half sections having a hole of 75 mm bore in centre to accommodate pvc pipe and submersible cable suitable for fixing to the pvc casing pipe top, electric logging and simple strata box including provision of 2 sets of ms clamps made of 50x6mm ms flat including nuts, bolts, etc. including one coat of epoxy primer and two coats of epoxy paint wherever necessary complete all as specified and directed by engineer-in-charge., supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, water lubricate, 3 phase, 10.0hp (appx) 415 volts, 50 hz with suitable submersible electric motor suitable for discharge of 2 liters per second against total head of 125m in the bore complete all as specified and directed by the engineer-in-charge. [ note : column pipe, submersible cable and control gear will be measured and paid separately]. [make: kirloskar / crompton / ksb], supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, wa

Central Government / Public Sector

CTN :38208990

22 Nov, 2024 NA

Rajahmundry - Andhra Pradesh

Tender For supply and installation of motorized grease worker having following features. 1. should be electrically oper ated 2. consisting of a geared motor of 60 strokes/min 3. mounted on a aluminum base with clamps to fix the grease wor kers. 4. number of strokes, should be continuously shown on a display 5. should be able to preset to stop the worker afte r any required number of strokes up to 100,000. 6. enamel finished 7. single crank flange 8. programmable counter with six digits 9. two worker plates, 51 holes 10. wrench for opening and closing of grease workers 11. connections for 230v, 50hz, 600 w power consumption 12. approximate weight 30kg 13. with instructions manual [ warranty period: 30 mo nths after the date of delivery ]

Central Government / Public Sector

CTN :38208022

25 Nov, 2024 NA

Bhubaneswar - Odisha

Tender For supply of joggled fishplates 60kg to rdso drg. no. t-5849 (alt-1) per set consists of two fishplates, t wo clamps to drg. no. rdso t-5854 and two clamps to drg. no. rdso t-5854/1 with modified a=86, b=96, c=184, d=172 and two bolts and nuts to drg. no. t-11525 with single coil spring washers to drg. no. t-10 773. irs specification for fishplate and fishplate bars, serial no. t-1:2021(first revision). [ warranty peri od: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38200663

16 Nov, 2024 NA

Visakhapatnam - Andhra Pradesh

Tender For procurement of pipe clamps for piping systems for vc11200

Central Government And Public Sector

CTN :38184825

25 Nov, 2024 10.98 Lacs

Kullu - Himachal Pradesh

Tender For supply of pin insulator for11 kv , 11 kv disc insulator along with ball cleaves eye socket dead end clamps bend staple complete set , 11 kv go switch 2 post per pole with gi pipe , 11 kv do fuse unit , ht stay set , rcc muff 2 mtr long , pvc spacer