Latest clamps Tenders | Government clamps Tenders

Central Government/Public Sector

CTN :43486861

19 Jan, 2026 NA

Chennai - Tamil Nadu

Tender For tender for supply of frsq davit spares e e - pitching cylinder docking head manifold block , pipe clamps , d-fender , end module for dcv-top , seal kit for cylinder double acting , pivoting cylinder seal kit , painter line cylinder bearing , manual operating lever , dcv seal kit

CTN :43487197

16 Jan, 2026 NA

Jodhpur - Rajasthan

Tender For supply of generator load testing jig cables 16ft , phase cables r-y-b 16ft , neutral cable 16ft , earth ground cable 16ft , insulated crocodile clips clamps

Central Government/Public Sector

CTN :43487776

19 Jan, 2026 NA

Mandsaur - Madhya Pradesh

Tender For supply of procurement of 400kv and below rating clamps and connectors for pgcil mandsaur new site : -clamps and connectors as per line item no. 1 to 20 of annexure-iv of bid atc , clamps and connectors as per line item no. 21 to 40 of annexure-iv of bid atc , clamps and connectors as per line item no. 41 to 60 of annexure-iv of bid atc , clamps and connectors as per line item no. 61 to 80 of annexure-iv of bid atc , clamps and connectors as per line item no. 81 to 100 of annexure-iv of bid atc , clamps and connectors as per line item no. 101 to 123 of annexure-iv of bid atc

State Government

CTN :43488737

17 Jan, 2026 1.99 Lacs

Moradabad - Uttar Pradesh

Tender For supply of substation clamps / connectors (q3)

CTN :43501787

29 Jan, 2026 NA

Hyderabad-T - Telangana

Tender For supply of autopsy saw , bone saw , brain matrices , ss trolley , artery forceps 6 inches curved , artery forceps 6 inches straight , mosquito forceps 4 inches curved , right angled forceps 6 inches curved , bp handle size 4 , bp handle size 3 , scissors dissecting metzenbaum 8inches , scissors vascular 7 inches , tissue forceps7 1 oblique 2inches , coagulation forceps , vascular forceps 7 3 oblique 4 inches , needle holder heavy 6.5 inches , needle holder - fine 7.5 inches , anderson adson retractor 8inches , langenbeck retractor 8inches 3 oblique 8 x 1 1 oblique 2 blade , towel clips , nerve hook , bull dog clamps , bowl smal , kidney tray , skin towels , small drape with window , suture needles round bodied , suture needles cutting , silk size 2 to 30cms long pack of 12 , gauze pieces , scissors dissecting metzenbaum heavy , curved clamp 8inches , aortic canula 20f , left ventricular vent 18f angled venous canula , derra partial occlusion clamp 7 , debakey angled clamp 60 degree 18mm jaw length , debakey angled clamp 90 degree , mason clamp 8inches , glover curved clamp right angle 8inches , satinsky vascular clamp 23cm , satinsky vascular clamp 20cm , satinsky vascular clamp 19cm , debakey chest retractor medium size , crile haemostat straight 14 cm , right angled clamps 17cm , demartel angled scissors , tubing clamp 15cm , tubing clamp 20cm , debakey thoracic tissue forceps 24 cm , debakey thoracic tissue forceps 20 cm , vascular forceps 24 cm , vascular forceps 20 cm , volk man retractor 4prongd 8inches , potts scissors 25 degree angle 7 1 oblique 2 inch , potts scissors 60 degree angle 7 1 oblique 2 inch , potts scissors 75 degree angle 7 1 oblique 2 inch , bethune rib shears double curve shafts 14 , periosteal elevator , suction tip , whole body drape with window , side sheet , tube occluding clamp serrated jaws with guard 7inches , venous canula 30 to 32f , bone chisel , surgical hammer high strength , bone cutter 8 inches //bid details 2 / 57

Central Government/Public Sector

CTN :43502506

28 Jan, 2026 NA

Kanyakumari - Tamil Nadu

Tender For supply of 3227023 ms flange table d 2inch 50mm , 3227024 ms flange table d 2 1 2inch 65mm , 3227019 ms flange table d 3inch 75mm , 3227003 ms flange table d 4inch 100mm , 3227004 ms flange table d 5inch 125mm , 3227027 ms flange 6inch table e ms flange 6inch table e bs 10 150mm , 3227028 ms flange table d 8inch 200mm ms flange table d 8inch 200mm , 1302013 m s clamps for cuff bends for hdpe pipes 90 mm dia as per drg no m 669 95 , 1302012 m s clamps for cuff bends for hdpe pipes 110 mm dia as per drg no m669 95 , 1302085 m s clamps for cuff bends for hdpe pipes 140 mm dia as per drg no m 669 95 , 1302011 m s clamps for cuff bends for hdpe pipes 160 mm dia as per drg no m 669 95 , 3230032 gi clamp coupling 75 mm id sl no 1 of fig 2 drawing no mw 009 19 02 2024 , 3230033 gi clamp coupling 90 mm id sl no 2 of fig 2 drawing no mw 009 19 02 2024 , 3230034 gi clamp coupling 110 mm id sl no 3 of fig 2 drawing no mw 009 19 02 2024 , 3230030 gi clamp coupling 140 mm id sl no 1 of fig 1 drawing no mw 009 19 02 2024 , 3230031 gi clamp coupling 160 mm id sl no 2 of fig 1 drawing no mw 009 19 02 2024

CTN :42970002

13 Jan, 2026 56.27 Lacs

Ernakulam - Kerala

Tender For corrigendum : supply of directional broadband acoustic projector with accessories , 150m projector cable , 350m projector cable , depth sensor with mounting clamps

CTN :43282970

11 Jan, 2026 1.39 Lacs

Multi City - Karnataka

Tender For corrigendum : supply of material for consruction of toilet in government school at janekunte villege belagallu gp - belt-broken stone aggregate 40 mm size, belt-broken stone aggregate 20 mm size, belt-broken stone aggregate 12 mm to 10 mm size, belt-coarse sand (zone iii), belt-portland cement, belt-mixer (concrete) - 1 cum capacity, belt-add watering charges at 1 percentage on material, belt-rubble stones, belt-bond stone 20 x 20 x 45 cm, belt-mixer (concrete small used in culvert), belt-size stone 20 x 20 x 25 cms, belt-formwork, centering & scaffolding for beams & lintels of building , belt-solid concrete blocks (40 x 20 x 20 cms)-4.00 n/sqmm, belt-mason class i (with tools), belt-unit cost as per the specification, belt-m.s. angles 65 x 65 x 6 mm 34.7 kgs, belt-60 x 60 x 10 guage sq. plate washer, belt-20 mm dia hold fast rod, belt-welding charges at 10 percentage on material, belt-formwork, centering & scaffolding for roof slab, belt-tmt bars fe 500, belt-ceramic tiles of size 30 x 30 cms, belt-mason class ii (with tools), belt-rcc ring 0.90 m dia, belt-rcc cap 1000 mm dia, 100 mm thick, belt-dry distemper , belt-white vitreous china clay flat back wash basin size 630x450mm, belt-copper plated brass piller tap 15mm, belt-cp brass waste 32 mm of standard pattern, belt-brass stop cock, belt-licenced plumber with tools, belt-indian type water closet of size 580 mm of specified make with footrests, belt-pvc pipe of 4kg per cum,75 mm, belt-pvc pipe of 4kg per cum,110 mm, belt-polyenthylene water storage tank of specified capacity l, belt-white vitreous china clay wall corner type, lipped front urinal basis of size 340x410x265mm, belt-p.v.c. automatic flushing cistern 5 litres with fittings, belt-c.i. / m.s. brackets for flushing cistern, belt-g.i. flush pipe of standard size and c.p brass spreaders, brass unions and clamps including fittings

Central Government And Public Sector

CTN :43458957

27 Jan, 2026 1.98 Crore

Rawatbhata - Rajasthan

Tender For supply , storage, handling, erection, installation, commissioning and testing of electrical equipment like power and control cable ,cable trays and supports lighting system and earthing system at rr site in oesc system. - supply and installation of following pre-fabricated and galvanized cable tray supporting structure materials as per specification, tender drawing (raps-1to8/ 01652/2053/ga) and reference drawings nos. kapp-3&4/ 21490/ 2002, 2003 & 2004/dd., 22 (22 mm dia) first rod with m22x55 long threading on one end & m 22 hex nut, isa 65x65x6, 22 (22 mm dia) rod, isa 65x65x8, ismc 75 channels, couplers (36 odx6 thk.), weld attachment (made of 75x10 thk. plate,320 long), swivel washer seat (46 x16 thk.), swivel washer (40 x16 thk.), iso 1234, 3.5x32 spilit pin, shear bolt m10x70 with hex. head & nut & washer, iso 1234, 3.5x20 split pin, washer (48 , is 2016), 3 mm thick l clamp with m8x30 mm long bolt, 2 plain washer, 1 spring washer and nut, 600mm long, 30 mm wide & 2.5 mm hot dip galvanized strip with two nos. of m8x30 mm long bolt, 4 plain washer, 2 spring washer and 2 nuts, supply and installation of following sizes of 1100v rated, cu conductor, xlpe insulated, frls pvc (st2) inner and outer sheathed un-armoured power cables along with wooden cable drums, 3cx2.5 sq.mm, 4cx2.5 sq.mm, 2cx2.5 sq.mm, supply and installation of following medium duty gi pipes/ heavy duty erw rigid conduits for routing cables from cable trays to distribution boards or to various field equipment or between equipment as directed by engineer- in- charge., 100 mm dia pipe, 65 mm dia pipe, 40 mm dia pipe, 25 mm dia conduit, supply and termination / connection of following types and sizes of 415v power cables at both ends along with cable glands, lugs, ferrules, clamps, hardware etc., and drilling of gland plates, crimping of lugs for termination of following cables (source end & load end considered separately)., supply of 3.5cx300, al, unarmoured, supply of 3.5cx185, al, unarmoured, supply of 4cx16, cu, unarmoured, supply of 3cx6, cu, unarmoured, supply of 4cx2.5, cu, unarmoured, supply of 3cx2.5, cu, unarmoured, supply of 2cx2.5, cu, unarmoured, termination / connection of 3.5cx300, al, unarmoured, termination / connection of 3.5cx185, al, unarmoured, termination / connection of 4cx16, cu, unarmoured, termination / connection of 3cx6, cu, unarmoured, termination / connection of 4cx2.5, cu, unarmoured, termination / connection of 3cx2.5, cu, unarmoured, termination / connection of 2cx2.5, cu, unarmoured, supply and termination of lugs for the following power cables (suitable bi-metallic connector shall be provided for termination of aluminium cable on copper bus bar) (neutral core lug shall be of suitable size)., lugs for 3.5cx300, al, unarmoured, lugs for 3.5cx185, al, unarmoured, lugs for 4cx16, cu, unarmoured, lugs for 3cx6, cu, unarmoured, lugs for 4cx2.5, cu, unarmoured, lugs for 3cx2.5, cu, unarmoured, lugs for 2cx2.5, cu, unarmoured, supply and installation of mortar based fire stops and fire break for all floor & wall openings of cable trays and in the run of cable trays and for sealing of electrical conduits including supply of structural steel support material if required., supply of 3 hr. rated fire stop for cable penetration in floor/walls + fire stop for cable/wire conduits & pipe sleeves, supply of 30 minute rated fire retardant compound (fire break) over cable, installation of 3 hr. rated fire stop for cable penetration in floor/walls + fire stop for cable/wire conduits & pipe sleeves, installation of 30 minute rated fire retardant compound (fire break) over cable, supply and installation of following sizes of gi conduits including supply & installation of all accessories like bends, elbows, couplers, hospital saddles, spacers, gi junction boxes, gi pull boxes, etc., and other accessories required to complete the job on wall/ column/ ceiling etc. as per specification and drawings. (the run

Central Government And Public Sector

CTN :43462443

27 Jan, 2026 45.19 Lacs

Muzaffarnagar - Uttar Pradesh

Tender For supply of material and job work under special repair to restoration and conservation of tomb of saiyed saif khan and his mother majhera muzaffarnagar 2025 2026 - items to be executed, unslaked lime, surkhi, c. sand, gur, belgiri, gum, brick aggregate 20-25 mm, 2nd class brick, kakkar stone, white marble, 65mm thick red sand stone 10 sqm, grey/white sand stone, rr stone, 65mm thick red sand stone 10 sqm (for arch), lakhori brick, tile bricks, mud including top finish, kail wood sleeper, raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of engineer-in-charge., ruled/ flush pointing on white sand stone masonry surface with lime, surkhi and marble dust mortar in the ratio of 1:1.5:1/2 {one lime : 1.5 surkhi (15% dark red and 85% light yellow surkhi) : 1/2 marble dust}. (the rate is inclusive of all materials & labours involved except scaffolding)., demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of engineerin- charge., providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia m.s. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with m.s. tubes, m.s. tube challis, m.s. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. the scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of engineer-in-charge. note:- (1) the elevational area of the scaffolding shall be measured for payment purpose. (2) the payment will be made once only for execution of all items for such works., "earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 all kinds of soil.", surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. 2.28.1 all kinds of soil, "demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. nominal concrete 1:4:8 or leaner mix (including equivalent design mix)", provision for providing & making lime slacking & mortar pit by means of pit excavation, brick masonry & plastering over it. the size of the over all pit is 8.00m x 3.00m & depth is 1.00m. the pit is divided in to three parts & cement plastere, provision for removal of malba for cleaning the sites including collecting, staking and disposal of the rubbish /malba upto 100 meter lead including all the labour and transportation etc complete. out of the monuments premises and further, provision for the purchasing of essential article and t & p for the proper execution of the work i) pvc sheet, ii) pvc pan (tasla), iii) hammer with handle 1kg, iv) iron chisel 4",6", 8", v) pvc bucket, vi) pvc mug, vii)wire & coir brush, viii) wire & coir brush, ix) gum boot pvc in pair, x) pvc pipe 1", xi) wooden handle (fawra, hammer), xii) first aid box with medicine, provision for drawing and documentation charges including inspection of exis

Clamps Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government And Public Sector

Central Government And Public Sector