Latest cleaning equipment scrap Tenders | Government cleaning equipment scrap Tenders

CTN :38602135

26 Dec, 2024 4.77 Lacs

Kalpakkam - Tamil Nadu

Tender For providing of facility management services - lumpsum based - as per tender document; sl no 1 clearing light jungle area bulb weeds grass including cutting all unwanted plants branches twigs wild growth etc complete and disposing the same 100metres away manually or..,facility management services - lumpsum based - as per tender document; sl no 2 cleaning and removal of accumulated silted materials from inside of the storm water drains whenever required including necessary labour cost of tools and plants and dispos..

Central Government/Public Sector

CTN :38587808

03 Jan, 2025 16.81 Crore

Tirunelvelli - Tamil Nadu

Tender For providing of custom bid for services - mechanized cleaning of pm sm coaches at ten coaching depot for 3 years inclusive of labour consumables tools machineries and other cost and including gst at 18 percentage quantity 81030 coaches,custom bid for services - intensive mechanized cleaning of coaches at ten coaching depot for 3 years inclusive of labour consumables tools machineries and other cost and including gst at 18 percentage quantity 28470 coaches,custom bid for services - cleaning and watering of pftr oea trains at ten coaching depot for 3 years inclusive of labour consumables tools machineries and other cost and including gst at 18 percentage quantity 141255 coaches,custom bid for services - cleaning and watering of pftr oea trains at tcn station for 3 years inclusive of labour consumables tools machineries and other cost and including gst at 18 percentage quantity 124830 coaches,custom bid for services - provision of toiletries in non obhs trains for 3 years quantity 100740 coaches,custom bid for services - outcom

CTN :38567217

23 Dec, 2024 18.62 Lacs

Multi City - Karnataka

Tender For annual maintenance contract of electrical crematorium including replacement of furnace coils, refractory materials and periodical cleaning of scrubbers using necessary spare parts, tools and skilled man power etc, complete at wilson garden electric crematorium in hombegowdanagara ward no 164.

CTN :38567229

23 Dec, 2024 19.94 Lacs

Multi City - Karnataka

Tender For annual maintenance contract of electrical crematorium including replacement of furnace coils, refractory materials and periodical cleaning of scrubbers using necessary spare parts, tools and skilled man power etc, complete at banashankari electric crematorium in devagiri temple ward at ward no 190. (sc only)

corporations/Associations/Others

CTN :38558181

19 Dec, 2024 21.26 Lacs

Multi City - Telangana

Tender For supply of food ingredients, stray animal catching tools, cleaning agents and other consumables for the f.y. 2024-25

CTN :38345635

18 Dec, 2024 17.50 Lacs

Mumbai - Maharashtra

Tender For corrigendum : providing of custom bid for services - office renovation - invitation of bids for conversion of offices outside engineering barrier gate to storage compartments of oil & dope store at oap, mumbai-29 , "dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :of area 3 sq. metres and below " , "dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. " , "demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. " , "providing and constructing brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to is: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):with modular bricks " , providing and laying internal plaster in c.m.(1:4) 12 to 18 mm thick minimum, to brick masonry and/ or concrete surfaces in any location and at all levels including cleaning and watering the surfaces, filling out hollows or out of plumb surfaces with mortar and finishing to correct line and plumb etc. complete. , providing and applying rust inhabitation coal/system to exposed reinforcement bars and also new reinforcement bars after removing scales and rust complete as per specification. providing and applying bond coat to all exposed concrete surface and reinforcement bars prior to any treatment as per specification. providing and applying single component, fiber reinforced, thixotropic repair mortar of average thickness 50mm and above of "'basf" (master emaco 348 s) as manufacturer's specifications in specific layers, curing the surface after 72 hours of application with wet gunny bags etc. including carting away debris out of aiesl/airport premises. , "steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.thermo-mechanically treated bars of grade more. fe-500d. " , removing and dismantling existing rolling shutter with ms work in single section or built-up section including rsj, angles, tees, flats, plates, gusset plates, channels etc., including dismembering using gas cutting, cutting machine lowering the same from any level and stacking up to the lead of 50 m. all as directed by eic, etc., complete., including labour, tools , plants etc., complete. , "providing and fixing isi marked flush door shutters conforming to is :2202 (part i) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. "

Central Government / Public Sector

CTN :38518196

31 Dec, 2024 1.52 Crore

Secunderabad - Telangana

Tender For providing of custom bid for services - cleaning of mmts coaches at lpi rcpt hyb sc gt or any other stations during night and dry cleaning of mmts coaches at lpi hyb or any other stations during day for a period of 2 years sch a cost of manpower as per scope of wo..,custom bid for services - sch b cost of tools consumables as per scope of work,custom bid for services - sch c cost of chemicals as per scope of work,custom bid for services - sch d cost of uniform for staff

Central Government/Public Sector

CTN :38041097

21 Dec, 2024 NA

West Tripura - Tripura

Tender For corrigendum : custom bid for services - repair and maintenance of ac modules dc modules and various pcbs of all departmental drilling rigs of ongc tripura asset-work includes but not limited to supply of men, materials, testing equipment / tools etc for fault finding (trouble shooting), repairing, calibration and functional testing of ac modules, dc modules and various pcbs in e1400 series drilling rigs of tripura asset. broad details of the activities to be carried out are as below: a. following jobs are to be carried out in pcbs i. physical checking of healthiness of components & cleaning of the pcbs. ii. checking of voltages at different points in the pcbs after powered up through simulator. iii. replacement of faulty components, limited to 50% cost of the pcb, to make it operational. iv. calibration of pcbs v. on load testing of 12 hrs. continuous loading for satisfactory operational vi. fixing of pcbs in the respective panels b. following jobs are to be carried out in ac module i. visual inspection of module for any loose hardware & cleaning of the module. ii. checking of circuit by using simulator. iii. checking of over frequency tripping. iv. checking of under frequency level. v. under frequency voltage cut back test vi. idle-run ramp and idle trip test vii. throttle regulation check viii. master slave and command circuits check ix. current demodulator check x. automatic voltage regulator check xi. meter circuit check xii. over voltage trip check xiii. reverse power trip check xiv. frequency demodulator check xv. module panel meter check xvi. replacement of faulty components, limited to 50% cost of the ac module, to make it operational. xvii. on load testing of 12 hrs. continuous loading for satisfactory operational xviii. fixing of ac modules in the generator panel c. following jobs are to be carried out in dc-module i. visual inspection of module for any loose hardware & cleaning of the module. ii. dead band and current limit calibrations iii. zero throttle interlock circuit test iv. firing circuit test v. speed feedback circuit test vi. power limit circuit test vii. slave circuit test viii. manual voltage circuit test ix. over current trip calibration test x. meter circuit check xi. replacement of faulty components, limited to 50% cost of the dc module, to make it operational. xii. on load testing of 12 hrs. continuous loading for satisfactory operational xiii. fixing of dc modules in the dcpcr panel d. following jobs are to be carried out in battery charger i. visual inspection and cleaning of components such as transformer, voltmeter, ammeter, pcbs, rectifier, indication lamps and tightening of loose hardware, if any. ii. checking of tripping logics, dc under voltage, dc over voltage, reverse polarity, ac mains fail, over current, over temperature etc. iii. replacement of faulty components, limited to 50% cost of the battery charger, to make it operational.-msme exemption - no | startup exemption - no

State Government

CTN :38487919

06 Jan, 2025 NA

Sabarkantha - Gujarat

Tender For jobwork of cleaning of pollution mud tank with required tools tackles and man power as and when required at gopalpura site

State Government

CTN :38402559

27 Dec, 2024 NA

Chennai - Tamil Nadu

Tender For supply of machineries & equipment for the electrician, fitter, lift & escalator mechanic, mechanic motor vehicle, machinist, operator advance machine tools, refrigeration air conditioning technician, solar technician, technician medical electronics, wireman, & welder trades.. - ac - air conditioner schedule, frost free refrigerator 200 l, three/four door refrigerator invertor (type), evacuating and refrigerant charging station, split a/c 1.5 ton with r32 refrigerant, duct able split a.c 3 ton with r410a or r-32 scroll compressor, cassette air conditioner 4500 kcal/hr, de scaling pump set, water cooler storage type, air conditioning, direct system complete with all controls including humidity control., air-conditioning, indirect system. (water cooled ), package a/c 5-ton capacity, bus a/c tutorial model, automatic ice cube m/c 50 kg/hour, vrf/vrv unit with two indoor units, split a/c (invertor technology), walk in cooler puf, air conditioner split type 2 tonne, au - automobile schedule, working model of air brake assembly, full floating axle and semi floating axle assembly, automative exhaust 5 gas analyser and diesel smoke meter (for petrol & diesel), diesel engine crdi - 4 stroke for dismantling and assembling with swiveling stand., multi scan tool to scan engine, abs & ebd, at, srs, body control and immobilizer, cut section of 6 cylinder diesel engine in moving condition to show movement of internal parts, diesel engine six cylinder in running condition, air bag simulator, air conditioning service unit (car), four stroke petrol engine with cng setup-working condition, mpfi petrol engine with swiveling stand along with special tools for dismantling and assembling, transfer case with stand for dismantling and assembly., two post car lift capacity 4000 kg, tyre changer machine motorized pneumatic type,, ultrasonic injection cleaning equipment, wheel alignment machine computerized 3d, wheel balancing machine, working condition of petrol mpfi engine assembly with fault simulation board, el - electrical schedule, oil testing kit:, solar panel 18 watt with battery, d.c. shunt generator with control panel 2.5kw,220v, motor-generator 5 kw (ac to dc), d.c. compound generator with control panel, motor- generator (dc to ac), synchronous motor 3 phase, 3 hp, 440 volt, 50 hz,4 pole, with all panel board accessories, three phase transformer shell type, electrical machine trainer, diesel generator set, dc generators series, shunt & compound type, solar street light, solar traffic light, solar d.c pump, solar panels, solar street light lamp set, motor- generator 3 kw (ac to dc), es - solar schedule, weather monitoring station, solar cell based sunlight radiation meter, solar simulator for solar cell characteristic study, iv curve tester, sun path finder, solar energy trainer with grouping of solar cells., solar tracker demonstrator kit, solar pv e-learning software using animations for trainee, solar pcu, solar grid tied inverter demonstrator kit, solar, wind, hybrid power plant, used water treatment solar plant demonstrator kit, demonstration kit for wind generation (wind turbine with blower), le - lift & escalator schedule, elevator control panel suitable for 5/8 passenger lift having separate input, output and cable alley chamber fitted with plc controller and related accessories., servo motor trainer 250w, 220/110v, working model of escalator, electromagnet brake assembly, door simulator set (car door, landing door and door drive unit), 5/8 passenger lift installed with all control and safety accessories, lm - light machineries schedule, drilling machine pillar 0-20 mm capacity with swivel table motorized with chuck and key, power hack saw machine 18 hydraulic, surface plate c.i 600 x 600mm with suitable stand and closed cover, slip gauge metric set 87 pieces in a box, work shop grade, drilling machine bench sensitive 13 mm capacity, slotter with base chuck, hm - heavy machineries schedule, pneumatic trainer k

Cleaning Equipment Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

Central Government / Public Sector

Central Government/Public Sector

State Government

State Government