Latest cleaning machine sale Tenders | Government cleaning machine sale Tenders

CTN :39927065

21 Jul, 2025 7.92 Lacs

North 24 Paragana - West Bengal

Tender For bid to ras corrigendum : custom bid for services - annual maintenance contract for maintenance of rac equipments panel ac qty-84 nos installed at various sections of of dc as per scope of work no ofdc-es12-rac-panel ac-01 dt 28-01-2025-amc for rac equipments (panel ac, qty. 84 nos) installed at various section of ofdc 1. the firm has to undertake periodic maintenance along with breakdown rectification of following equipment installed at various locations in side ofdc premises. sl. no 01, machine, location, capacity, nos. of unit, description panel ac, various machine at ofdc, 0.18-1.68 kw, 84 2. the firm has to carry out the preventive maintenance quarterly for each equipment as per check list approved by es section which shall include but not be limited to the following activities, a. cleaning of filters., b. checking of evaporator/condensing coil., c. checking of refrigerant pressure (suction and discharge)., d. checking compressor intake current., 3. the brake down maintenance of the equipment shall be include but not be limited to the following a) supply and replacement of faulty spares including the following but not limited to refrigerant compressor., blower., starting and running capacitor., timer and contractor., strainer and contractor., cooling and condensing coils., hose pipes., copper tube., refrigerant gases..

CTN :40741745

21 Jul, 2025 31.70 Lacs

Sundergarh - Odisha

Tender For corrigendum : custom bid for services miscellaneous contingency works in ash utilization-1a) the scope of work includes providing and covering the earth of about 300 mm to 500 mm thick over the final ash layer as per site condition and direction of eic. the agency has to arrange the earth. the earth to be covered at already filled ash sites as and when required. the agency has to arrange the good earth including all compliances like permission from relevant govt office, payment of royalty etc. loading, transportation and disposal of earth at site, leveling or dressing of disposed earth (as per site condition and direction of eic) at different sites as per instruction of eic. 1b) in dewatering work the agency has to deploy dewatering pump (diesel/electric) with all the t&ps with suction and discharge pipes as per requirement at site so that water can discharged at the identified nearby channel/nallah etc. without causing any disturbance to the locality. 1c) agency has to provide jcb/excavator complete with operator and helper as required as per requirement at inside or outside of the plant as per instructions of eic. 1d) slag transportation to be done by agency as and when required from rsp slag yard and to be filled/laid in dyke and for repairing of road. 1e) the cleaning/moping work to be done inside/outside of the plant as per the requirement and instructions of eic. it includes moping and cleaning of roads and clearing any ash for emergency purpose during visit of govt. officials. 1f) a skilled manpower is required to be provided for various work like reconciliation of bricks and preparing logbook of the same, keeping and monitoring gps data of gps deployed in trucks, daily updation of ash user data required for ash sale, monitoring of jcb work, compiling end user data, monitoring of dewatering at site etc. computer skill is a requirement for this boq. 1g) the road cleaning of outside road of nspcl s silos using mechanized road sweeper machine to be done as per instruction of eic. hence the agency has to deploy required machinery along with all the fulfilments like operator, helper (if required), fuel and required maintenance along with spares for smooth operation of machine as per schedule and instruction if eic. the dust, dirt, debris etc. from the cleaning activities to be disposed at designated area in the direction of eic. 2. area of work: the job is to be carried out inside/outside of the plant as per requirement and as per instructions of eic. 3. list of major equipment and system covered in this contract: the following equipments may require to be deployed to achieve desired progress. the list is indicative and may vary as per actual requirement. a) jcb / pay loaders b) hiwas/tippers/trucks c) levelling equipment s with all accessories in good working condition d) water pump e) dg set f) road sweeping machine 4. general scope of work: various miscellaneous works like earth cover, dewatering, deployment of jcb, transportation of slag, ash cleaning from.

CTN :40307688

18 Jul, 2025 NA

Delhi - Delhi

Tender For corrigendum : procurement of spares for rafale aircraft - rag,wiping, packing retainer, bolt,plastic, bolt,plastic-red, lighting system, washer,flat, pre-formed packing, cockpit light bulb, glow plug, strap,tiedown,electrical components, screw,machine, o-ring, decal, closure, bolt,plastic, filter element,fluid, brake fluid,automotive, ring, pre-formed packing, pre-formed packing, screw,machine, lubricating oil, weapons, filter cartridge, rustremovalsolvant, audio kit foam, cover, spring, filter cartridge, chinstrap, adhesive, parts kit,oxygen mask, o-ring, packing with retainer, sealing compound, green locking varnish nuclass:2h269, day/night distress signal, jugular assembly, hardener,adhesive, insulation sleeving,electrical, detector,clogging-fuel, connector,plug,electrical, closure, lead,electrical, strap,webbing, inspection penetrant, filtering element, washer, bolt,plastic, primer coating, packing,preformed, oil repellent protection and lubrication or weapons/nuclass:2c095, neoprene adhesive, lining,helmet,shock absorbing, grease isoflex topas nb52, tube assembly,metal, dessicator, fuse, o-ring, hydraulic hose, cutting fluid, cleaning compound,solvent-detergent, adhesive 50 ml tube, card, bag,plastic, paint, rubber, nut,self-locking,plate, eru chassis, cleaning compound,solvent, adhesive, desiccating cartridge, ethyl alcohol, technical, ita/inu cable, fixing set for inu support, tape,pressure sensitive adhesive, clamp, polyurethane coating, tape,pressure sensitive adhesive, liner,flyers helmet, sealing compound, coupling butt, grease cartridge, silicon cartridge, coating, insulation sleeving,electrical,spec, stop-ring, safety valve, safety valve, coating compound,nonslip, coating compound,nonslip, gm80 polyester filter, rubber sheet,solid, setscrew, setscrew, insulation blanket,thermal,aircraft, seal,nonmetallic round section, guide,positionning, air duster(compressed air canister, fma switches case, equipped cable, isopropyl solvent(ipa)ispropanol, remover,electrical contact, o-ring, hmd liner, hmd liner, detector, leak 400ml sr, lock-wire, bearing cage and needle rollers, adhesive, overhead lighting module, overhead lighting module, non resettable shock indicator, thread, tube assembly,metal, sealing glue, cover, o-ring, terminal board, terminal,lug, indicator lamp, adhesive, set of repair jack, leak detector spray, rps container

Central Government And Public Sector

CTN :41083714

28 Jul, 2025 NA

West Champaran - Bihar

Tender For supply and servicing of spares for sugar grader at hbl plant sugauli, east champaran and lauriya, west champaran, bihar. - spares for 25 tph capacity ic make sugar grader as per below details:, fibre glass dust cover (01 set=05 pieces), wedge assembly complete with taper wedges, i-bolt,o-ring with chain and special washer, self cleaning chain with ring

CTN :40801236

11 Aug, 2025 NA

Ernakulam - Kerala

Tender For corrigendum : supply of spares for rifle insas 1b1 5 56mm - sling , revet solid piston extension , pin straight headed stop sight granade , nut plne round lock foresight , spring helical compression for hod , foresight , band retainer , spring dovel sleeve 3x15mm heavy , screw shoulder front sling loop , spring dowel sleeve heavy 2.0x7.0mm , spring helical compression for lock retainer and plunger gas regulator , ring retaining carrying handle , breech block assy , spring helical compression for sear , spring recoil assy , lock retainer , pin grooved headed for trigger and safety sear , retainer and guide assy welding , bracket sling , screw, externally relieved body fixing, pistol grip , loop sling rear , flash absorber , spring leaf , gas block locking ring circlip light a16 , pin lock sear safety , ring retaining , cocking handle assy , pin grooved hinge for cover pin straight headed catch magazine , guide piece , plunger, cocking handle , plunger , multi application hod , regulator, gas , lock wheel , hammer , piston gas , spring plunger for backsight helical , spring helical comp, for sear safety , washer finishing , retainer , pin grooved headless for cocking lower hand guard , spring plunger wheel lock , stud changing lever , spring catch magazine , magazine catch , screw special , screw for lock retainer , lever pin locking riveting assy , pawl hammer , pin straight headless fixing bracket , lever pin locking , pin straight headless for axis pawl , block breech , cup , channel left , channel right , ejector small arms cartridge , butt plastic , butt assy , guard hand assy upper steel strip , lever change , guard trigger , plunger , sight rear , grip pistol , catch cocking handle , spring helical compression recoil , bottle oil mk-5 , oiler hand with screwed cap brush and leather washer , pin grooved headed for hammer , block fixing pistol grip , plunger multi application gas gegulator , pin straight headed catch magazine , plate rear cover , screw block rear , adaptor for cleaning bore by pull through

CTN :41055099

22 Jul, 2025 NA

Budgam - Jammu And Kashmir

Tender For supply of it spares e e - pcb board , primary charge roller , cleaning blade , opc drum , monitor

CTN :40996421

19 Jul, 2025 NA

Pune - Maharashtra

Tender For supply of oh spares and consumables for cvs and emission system at vtc002 and cvtc 1). system precheck, back up and parts check 2). dismantling of cvs piping, heat exchanger, heaters, rmt, hepa unit, sampling pipe 3). cleaning of cvs piping heat exchanger, heaters, rmt, hepa unit, sampling pipe 4). cleaning of cvs piping heat exchanger, heaters, rmt, hepa unit, sampling pipe 5). reassembly of cvs piping heat exchanger, heaters, rmt, hepa unit, sampling pipe 6). reassembly of cvs piping heat exchanger, heaters, rmt, hepa unit, sampling pipe 7). cleaning of dehumidifier unit and part replacement, chmp cleaning & part replacement 8). part replacement of esu, dls units 9). ovn part replacement 10). dismantling of mexa rack psu, analyser, shs, ups, pc , mexa rack cleaning and part replacement 11). analyser part replacement 12). analyser part replacement 13). bsu part replacement 14). system power on, worm up and analyser adjustment 15). analyser adjustments and check all alarm and flow setting 16). start mexa checks and test 17). mexa checks and test 18). mexa checks and test 19). mexa checks and test 20). cvs temp and pressure sensor calibration 21). cvs calibration for diesel/gasoline 22). dls calibration 23). propane injection for diesel 24). propane injection for gasoline and system handover & 1). system precheck, back up and parts check 2). dismantling cvs piping, rmt, sampling pipe and cleaning 3). reassembly cvs piping, rmt, sampling pipe and part replacement of esu 4). part replacement of esu, dls units 5). dismantling of mexa rack psu, analyser, shs, ups, pc, mexa rack cleaning and part replacement 6). analyser part replacement 7). bsu part replacement 8). system power on, worm up and analyser adjustment 9 ). start mexa checks and test 10). mexa checks and test 11). mexa checks and test 12). cvs temp and pressure sensor calibration 13). cvs calibration 14). propane injection for gasoline and system handover

Central Government / Public Sector

CTN :41010914

23 Jul, 2025 NA

Panipat - Haryana

Tender For procurement of pig spares for nrpl stations - guide disc for 30in bi directional pig , disc spare bi di cleaning pig 30in , spacer disc 30in bi directional pig , sparecircular brush pig size 30in , gauge plate for 30in gauge pig , uni direction cup pig 30 inch , guide disc 24in bi directional pig , sealing disc 24in bi directional pig , spacer disc 24in bi directional pig , circular brush f_24inch bidirectional pig , aluminium gauge plate for 24 inch size gauge pig , guide disc 22in bi directional pig , sealing disc 22in bi directional pig , spacer disc 22in bi directional pig , spare circular brush pig size 22 inch , gauge plate size 22 inch 95 percent id , guide disc 14in bi directional pig , sealing disc 14in bi directional pig , spacer disc 14 in id 117-118 mm od 260 mm thickness 25 mm , circular brush pack 14 in id 118mm od 340mm thickness 64mm , aluminium gauge plate for 14 inch size gauge pig , guide disc 12in bi directional pig , sealing disc 12in bi directional pig , spacer disc 12in bi directional pig , circular brush f_12inch bidirectional pig , aluminium gauge plate for 12 inch size gauge pig , guide disc 10.75in bi directional pig , sealing disc 10.75in bi directional pig , spacer disc. 10 in id 89mm od160 mm thickness 15mm , circular brush pack 10.75 in id 88 mm od 230mm thickness 80mm , gauge plate for 10in gauge pig , bolting disc 24in bi directional pig , bolting disc 22in bi directional pig , bolting disc 12in bi directional pig , guide disc 16in bi directional pig , sealing disc 16in bi directional pig , spacer disc 16in bi directional pig , circular brush f_16inch bidirectional pig , gauge plate set for 16 inch gpig , spacer disc 10 in id 89mm od 160 mm thickness 15mm , sealing disc, 10.75in bi directional pig , spacer disc 10.75in bi directional pig , circular brush pack 10.75 in id 88 mm od 230mm thicknes 80mm , guide disc 8in bi directional pig , sealing disc 8in bi directional pig , 8 in pu spacer disc for bi di pig , 8 in circular wire brush for bi di magnetic pig , gauge plate for 08 gauge pig

State Government

CTN :40980792

22 Jul, 2025 NA

Bankura - West Bengal

Tender For supply and delivery of pump spares for 200 hp multistage pumping machineries for lurka water supply scheme,raipur block under bankura mechanical division phe dte. - supply and delivery at site of following spares for wilo mather and platt make -pump model no ii a pl x 6 chrs ( sl.no. 81252652/70/2 & 81252652/70/3, & 81252652/70/4) as per details in technical specififation, casing ring , part no no.1181 (moc-cf8m), "neck bush part no no.1102(moc-cf8m) ", "impeller part no no.1500 (moc-cf8m) ", bearing bush,part no no.2700 ( moc-ltb2+wml) , "combine seating & bush (moc- wcb), part no no.2082", "balance valve , ,part no no.1900 (moc-cf8m)", "suction sleeve ,part no no.2103 (moc-ltb2)", delevery sleeve part no no.2102 (moc-ltb2), "neck bush screw ", "gland packing graphited cotton, part no no.2410 for p.no- 2,3 & 4", oil filter plug (rubber), part no.no. 4260, oil drane plug , fitting fixing of above spares in the respective pumping machineris including supply of all necessaries materials i.e-non metallic full face supper quality rubber gasket, glang packing, m.s nut bolt & washer etc. after dismanteling of pumps under the supervision of wilo pump technicians as per direction of e.i.c, painting of the above pump by the after properly preparation of surface by scraping sand paper, cleaning etc. and using best quality primer ready mixed primer of approved make, and brand incl. two coat of superior quality synthetic enamel paint as per direction .for p. no- 1,2,3,4, transportation charge for carrying of above repaired pump model type-ii a pl x 6chrs(sl.no 81252652/70/1- 4) by hiring proper vehicls including labour charges and hiring charges of hydra for shifting heavy materials with loading and unloading from drugapur workshop to lurka water supply scheme as per direction of eic, testing & checking the above 3nos repaired pumping machinery one by one by the 8 hr continuous run up to satisfaction of e.i.c, add: 18% gst, add: 1% cess

CTN :40673008

18 Jul, 2025 NA

Uttara Kannada - Karnataka

Tender For corrigendum : supply of critical spares of 9mm auto pistol and 9mm carbine gun - guide spring main assy , ejector , lever slide locking , sear , spring main , barrel cisa 333 or 15 , extractor , hammer link , hammer mk2 , pin axis trigger , pin firing , pin sear , spring sear assy , arms sear connecting , link hammer assy , pin arm , rod cleaning 9mm pistol et , spring pin firing , trigger , barrel , block breech assy , catch magazine , cap spring return icr 55a , spring catch magazine , spring plunger , foresight , pin locking trigger mechanism , spring outer return , spring return inner , spring return assy , back sight assy , pin extractor , pin lever locking cap

Cleaning Machine Sale Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government / Public Sector

State Government