Latest clevis spring Tenders | Government clevis spring Tenders

corporations/Associations/Others

CTN :40126145

05 May, 2025 2.62 Lacs

Pimpri - Maharashtra

Tender For 22/2025-26 purchase of laqshya instruments - purchase of instruments ( laqshay), radiant warmer- technical specification of radiant warmer with baby bassinet a radiant warmer is used to keep the patient s core temperature stable at 37 o c. it should be microprocessor controlled radiant warmer with manual and servo options. it should have facility to display both skin and air (ambient) temperature separately.. it should have audiovisual alarm facility for overheating beyond set temperature range. it should have alarm facility for patient temperature less than or greater than the required temperature i.e. above or below the set range. it should rotate and swivel in different direction, so as to allow taking x-ray. the light should be dazzle free. it should have alarm for power failure. it should have alarm for heater failure and auto cut off for high temp. it should have alarm for probe failure. it should have time out alarm in manual mode. it should have facility to auto reset the system in case of hang up caused by power fluctuation. it should have manual setting for high and low alarm setting. in servo mode, the heater output should be controlled to maintain the baby at the required set temperature. in manual mode, the heater output should be directly controlled by a setting on the front panel should have a facility to lock the keyboard to avoid unwanted user. the desired temperature range from 25 to 40 degree c. the resolution should be 0.1 degree c halogen based observation light should be provided for observing the baby. it should be mounted on a pole with sturdy base with lockable castors power supply: power input to be 220-240 vac, 50hz fitted with indian plug. certificate of calibration and inspection from the factory. warranty: comprehensive warranty for 5 years after warranty documentation: user, technical, maintenance manuals to be supplied ce, iso certified , fetal doppler - technical specification of fetal doppler should be compact, table type and light weight. large lcd display for display of fetal heart rate. back light for better visibility display signal quality, low battery, etc., high sensitivity doppler probe of frequency 2.0 mhz ultra sound intensity 10mw/cm2. built-in speaker with output not less than 1.0w should work on rechargeable batteries with minimum battery time of 300minutes. battery charger and spare set of batteries aa type to be supplied. volume control facility and audio output for ear phone should be available. heart rate range should be from 50 to 240 b pm with accuracy of + /-2% should be water proof body. should have facility for fhr data transfer to pc. doppler probe should be light weight with holder facility when not in use. should be supplied with carrying case. machine should be iso mark, baby digital thermometer - technical specification of baby digital thermometer range 0.1 to 1000 degree centigrade measurement mode- min, max, average, differential, dual temperaturereading measurement unit- degree centigrade, degree fahrenheit,kelvin temperature probe with connecting cable relative humidity10 to 90% rh non-condensing ip rating- ip 40 g) probe response time 2-3 seconds it should be who & unicef standards, delivery trolley/patient stretcher trolley- technical specification of patient stretcher trolley overall size: 1905mm l x 710mm w x 660mm to 910 mm h. stretcher dimension 1830 mm l x 555 mm w. two section top. height adjusted by foot operated maintenance free hydraulic pump. height adjustment shall be obtained by hydraulically operated mono block type linear actuator pump foot operated actuation having stroke of 140 +/- 5 mm, push force 10 kn at 270 bars, number of complete pump stroke 22 to 24 for full stroke length x-ray permeable removable stretcher, backrest raised on ratchet. quick trendelenburg as well as reverse trendelenburg positions shall be provided with easily accessible operating handle provided with two gas springs for easy action. s.s. saline rod with 12 mm dia s.s

corporations/Associations/Others

CTN :40126147

05 May, 2025 2.62 Lacs

Pimpri - Maharashtra

Tender For 22/2025-26 purchase of laqshya instruments - purchase of instruments ( laqshay), radiant warmer- technical specification of radiant warmer with baby bassinet a radiant warmer is used to keep the patient s core temperature stable at 37 o c. it should be microprocessor controlled radiant warmer with manual and servo options. it should have facility to display both skin and air (ambient) temperature separately.. it should have audiovisual alarm facility for overheating beyond set temperature range. it should have alarm facility for patient temperature less than or greater than the required temperature i.e. above or below the set range. it should rotate and swivel in different direction, so as to allow taking x-ray. the light should be dazzle free. it should have alarm for power failure. it should have alarm for heater failure and auto cut off for high temp. it should have alarm for probe failure. it should have time out alarm in manual mode. it should have facility to auto reset the system in case of hang up caused by power fluctuation. it should have manual setting for high and low alarm setting. in servo mode, the heater output should be controlled to maintain the baby at the required set temperature. in manual mode, the heater output should be directly controlled by a setting on the front panel should have a facility to lock the keyboard to avoid unwanted user. the desired temperature range from 25 to 40 degree c. the resolution should be 0.1 degree c halogen based observation light should be provided for observing the baby. it should be mounted on a pole with sturdy base with lockable castors power supply: power input to be 220-240 vac, 50hz fitted with indian plug. certificate of calibration and inspection from the factory. warranty: comprehensive warranty for 5 years after warranty documentation: user, technical, maintenance manuals to be supplied ce, iso certified , fetal doppler - technical specification of fetal doppler should be compact, table type and light weight. large lcd display for display of fetal heart rate. back light for better visibility display signal quality, low battery, etc., high sensitivity doppler probe of frequency 2.0 mhz ultra sound intensity 10mw/cm2. built-in speaker with output not less than 1.0w should work on rechargeable batteries with minimum battery time of 300minutes. battery charger and spare set of batteries aa type to be supplied. volume control facility and audio output for ear phone should be available. heart rate range should be from 50 to 240 b pm with accuracy of + /-2% should be water proof body. should have facility for fhr data transfer to pc. doppler probe should be light weight with holder facility when not in use. should be supplied with carrying case. machine should be iso mark, baby digital thermometer - technical specification of baby digital thermometer range 0.1 to 1000 degree centigrade measurement mode- min, max, average, differential, dual temperaturereading measurement unit- degree centigrade, degree fahrenheit,kelvin temperature probe with connecting cable relative humidity10 to 90% rh non-condensing ip rating- ip 40 g) probe response time 2-3 seconds it should be who & unicef standards, delivery trolley/patient stretcher trolley- technical specification of patient stretcher trolley overall size: 1905mm l x 710mm w x 660mm to 910 mm h. stretcher dimension 1830 mm l x 555 mm w. two section top. height adjusted by foot operated maintenance free hydraulic pump. height adjustment shall be obtained by hydraulically operated mono block type linear actuator pump foot operated actuation having stroke of 140 +/- 5 mm, push force 10 kn at 270 bars, number of complete pump stroke 22 to 24 for full stroke length x-ray permeable removable stretcher, backrest raised on ratchet. quick trendelenburg as well as reverse trendelenburg positions shall be provided with easily accessible operating handle provided with two gas springs for easy action. s.s. saline rod with 12 mm dia s.s

corporations/Associations/Others

CTN :40135094

16 May, 2025 NA

Ranga Reddy-T - Telangana

Tender For supply of charging mechanism gear box with switch on block , spring charging motor 220 v ac/dc , copper contact assembly with finger arm contact fitting with springs, insulated round pipe & bolts h

State Government

CTN :40139070

30 Apr, 2025 NA

Khaperkheda - Maharashtra

Tender For supply & replacement work of foundation deck springs assembly for pa fan unit no. 3 & 4 of khaperkheda tps.

Central Government/Public Sector

CTN :40117354

02 May, 2025 NA

Palakkad - Kerala

Tender For supply of springs

Central Government / Public Sector

CTN :40120400

15 May, 2025 NA

Vadodara - Gujarat

Tender For cmi spares - list of item(s) / work(s) as per tender documents, lip seal for dial indicator, top seal f/upper bearing housing, upper bearing,p/n:2227, bottom seal f/uppr brg husg, sets o ring f/lower shaft, o ring for main head flnge, knuckle pin item no-7, pawl pin item no-8, pawl bushing item no-10, pawl item no-11, spacer-cylinder pin item no-12, cylinder clevis pin item no-14, washers,cylinder pin,set, p/n-3530b, lube hoses no.5,7,8, p/n-9910a-18.75,uop, lip seal set, main bearing,p/n-2536-2537, secondary seal sleeve,p/n:0189c, o ring f/husg top head joint, sets o ring f/secondary seal, hydraulic pump dischrge filtr element, flange gasket, sight glass assy,p/n-2410, o ring for sight glass, p/n-2740, packs of lubricate grease, pawal springs,p/n-61,rv-iii,uop

CTN :40127997

15 May, 2025 NA

Kadapa - Andhra Pradesh

Tender For procurement of shock absorber springs

Central Government/Public Sector

CTN :40132817

02 May, 2025 NA

Multi City - Multi State

Tender For supply of tag for test report of fiat springs to spring bar

CTN :39641389

28 Apr, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For bid to ras corrigendum : custom bid for services - one time repair case for undertaking overhauling and specific dr on engines of lcm 411412413 414 of ins jalaswa- scope of work(services)- 1 major overhaul - moh lcm boats 3, 2 cylinder block reconditioning 3, 3 crank shaft reconditioning 3, 4 flywheel & housing checking if required replacement 8, 5 cylinder head reconditioning (each cyl. head) 6, 6 checking and reconditioning of main bearing bore 3, 7 overhauling of fresh water pump 3, 8 overhauling of lub oil pump 3, 9 overhauling of fuel pump 3, 10, chemical cleaning and pressure testing of fresh water cooler-keel cooler system, flushing only 8, 11 chemical cleaning and pressure testing of lub oil cooler 3, 12 chemical cleaning and pressure testing of return fuel oil cooler 8, 13 chemical cleaning and pressure testing of exhaust manifold 6, 14 air inlet filter cleaning 32, 15 changing of lub oil & fuel filter (01 set) 8, 16, changing of control cables engine (throttle, acc. , air shut off, fuel shut off), each 3, 17 renewal of hoses with unions (list of inaccessible hoses) 3, 18 renewal of gauges (each guage) 9, 19 renewal of piston rings (each piston) 36, 20 renewal of connecting rod (each c/rod) 36, 21 renewal of crankshaft bearing (each brg pair) 21, 22 renewal of cylinder liner (each cyl. liner) 36, 23 renewal of gasket (cylinder head, cac, tc, coolers) each 3, 24 overhauling of governor 8, 25 overhauling of vane blower (each blower) 6, 26 renewal of connecting rod brgs (each pair) 36, 27 overhauling of starter 8, 28 check/replacement of rocker arm and push rod 3, 29 renewal of crankshaft oil seal ring 3, 30 renewal of crankshaft rear oil seal 3, 31 overhauling of gear train and timing marks 3, 32 changing of solenoid shut off valve 8, 33 changing of thermostat element (each th.) 12, 34 calibration of pressure temp switch 8, 35 assembling the cylinder head and changing of gasket (each cyl. head) 6, 36 all exhaust valve replacement, setting and renewal of seal 6, 37 calibration/changing of fuel injector (each inj.) 96, 38 changing of injector tube (each tube) 36, 39 decarbonization of cylinder head (each head) 6, 40 chemical cleaning and pressure testing of cylinder head (each head) 6, 41 fuel rack adjustment 16, 42 governor setting 8, 43 tappet setting 8, 44 check all instrumentation for working 8, 45 crankshaft deflection reading 3, 46 renewal of piston assy with piston installation kit 36, 47 gauging/reconditioning of camshaft assy 6, 48 renewal of camshaft bearings 30, 49, renewal of camfollowers, valve bridges, shafts, springs, washers of cylinder head, assy, 6, 50 renewal of vibration damper 3, 51 overhauling of accumulator pump 8, 52 overhauling of hand charging pump 8, 53 cleaning and inspection of steering gear pump 8, 54 repair/renewal of sea water pump 8, scope of work( supply of spares)-1, tube kit, injector hole (includes 5104701 seal rin 8925981 36, 2 nut, 7/16"-20 5117629 72, 3 piston kit cr/hd (18:1) 23522497 36, 4 ring set, piston std gap 23526990 36, 5 spacer 5144846 72, 6 bolt, 7/16"-20x2.00" l. (12 point) 5148373 72, 7 guide, exhaust valve 5129919 144, 8 seal assy. 8921209 144, 9 kit, 12v, one bank 5149512 6, 10 valve kit 5228769 96, 11 tip assy. (5d45) 5229026 96, 12 valve, inj check 5228694 96, 13 plunger and bushing assy. (5n65) 5228668 96, 14 tube asm fuel cyl head to injection (short) 23533307 96, 15 tube asm fuel cyl head to injector (long) 23533308 96, 16 hose, bulk #8x25 ft. (12.8550) 5199576 3, 17 hose, bulk #6x25 ft. (12.8550) 5199575 3, 18 elbow, 90 deg. 3/8" inv. fl. tube 1/4 nptf brs 8925030 12, 19 connector, 3/8" inv. fl. tube (12.9460) 8925048 3, page 38 of 66, 20 connector, 3/8" inv. fl. tube (12.9460) 8924171 3, 21 blower kit (small bearing) 23514203 6, 22 tube assy.,oil (blower drive support) 23515803 3, 23 clamp assy. (t-bolt) 5106219 6, 24 connector 1/8 nptf brass .025 restr 23509534 3, 25 insert, filter adaptor(4.2240) 5103892 3, 26 filter assy., lub oil spin 23530408 16, 2

Central Government/Public Sector

CTN :40098591

03 May, 2025 NA

Varanasi - Uttar Pradesh

Tender For tender for supply of compression springs wire dia less than 10 mm oem - comp. spring (hw-172.115) , compression spring (hw-354.11) -- fully m/cd item as per drg. 31140401028 rev.03 with matl. as per drg. (hwr. matl. code - w97311404037) , comp. spring (hw-172.123) -- fully m/cd item as per drg. 31142401082 rev.03 with matl. as per drg. (hwr. matl. code w97311424011) , comp. spring (hw-368.96) , comp. spring (hw-385.26) -- as per drg. 31142401084 rev.04 with matl. 50crv4 din17221 (hwr. matl. code w97311424038)

Clevis Spring Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors