Get complete information related to latest Clip Washer Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Clip Washer Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Clip Washer Tenders.
Tender For supply of set of screw, nut bolts & washers for lavatory corrosion attention.(1) ss m8*40 bolt =5000 nos,(2) ss m8*60 bolt =2000 nos,(3) ss m8 nut =7000 nos,(4) ss m8 washer =7000 nos,(5) ss m6 washer= 5000 nos,(6) ss m6 nut=5000 nos,(7) ss m6*35 csk screw = 3600 nos,(8) ss m10*40 bolt = 1000 nos,(9) ss m6*60 bolt = 800 nosmaterials should be made of austenitic stainless steel conforming to aisi 304 grade.
Tender For supply of a set of items for pipe laying for waste water for lhb type coaches consisting of 07 items. (1) pipe dia 42 (od) x 2 x 1100 conforming to din specification no. din2391c, x5crni1810 and to rcf d rg no. mi006005, item-1, alt-c, qty.-1 no./set(2)pipe clip 43 conforming to spec. no. is:6911-92, grde-304 si and to rcf drawing no. lw63110, item-12, alt-nil, qty.-4nos/set (3) stainless steel hex head bolt m8 x 40 (a2-70) conforming to is:1364-92, pt.-1, is:1367-84, pt.-14 and to rcf drawing no. mi006005, item-4, alt-c,, qty.-14nos./set (4) stainless steel machine washer a8.4 (a2-70) confirming to is:2016-1967, din125, is:1367-84, pt.-14 and to rcf drawing no. mi006005, item-4, alt-c,, qty.-14nos./set(5) stainless steel nylo c nut am8 (a2-70) conforming to is:7002-1991, din982, is:1367-84, pt.-14 and to rcf drawing no. mi0060 05, item-4, alt-c, qty.-14nos./set (6) support block confirming to is:7002-1991, din982, is:1367-84, pt.-14 and to rcf drawing no. 4 10113 0 30 095 093, alt-nil, qty.- 4nos./set (7) support bracket complete confirm ing din59382(sew400 x2cr11 1.4003) and to rcf drawing no. le63243,alt- nil, qty.-2nos./set [ warrant y period: 30 months after the date of delivery ]
Tender For maintenance of mi scheme under belbari rd block during the year 2025-26/sh_ - repair _ maintenance of pump-motor, suction-delivery _ electrical accessories etc. (job no. tr/34/minor works/wrd-i/2025-26) - dismentling of pump for over hauling including greasing, gland packing, necessary repairs & reinstallation of the same including trial run for 10 hrs. in two spell complete as per direction of the engineer-in-charge.i) for li, supply & fitting fixing ball bearing of approved quality for pump required during overhauling.i) 6306 ball bearing (tata /skf), providing & fitting fixing shaft sleeve bush of approved quality.i) for li (cast iron), providing & fitting fixing shaft sleeve nut of approved quality.i) cast iron (ci), providing & fitting fixing c.i. gland of approved quality.i) for li, providing & fitting fixing c.i coupling complete with nuts & bolts of approved quality.i) 150 mm dia, providing & fitting fixing coupling nuts & bolts (all size)of approved quality.i) for li, providing & fitting fixing coupling rubber bush (all size)of approved quality. i) for li, providing & fitting fixing coupling star bush (all size) of approved quality.i) 150 mm dia, providing & fitting fixing pump shaft of approved quality., supplying and fitting fixing of asbestos rope of best quality as per direciton of engineer-in-charge. i) 6mm to 8mm thick, ii) 10 to 12 mm thick, providing & fitting fixing casing ring of approved quality.i) 150 mm dia (10 mm thick), supplying and fitting fixing of pump cooling pipe of best quality as per direciton of engineer-in-charge., providing & fitting fixing lantern ring for pump of approved quality., supplying and greasing/applying of grease of approved quality as per direction of engineer-in-charge., providing and fixing g.i. bend /elbow in the pipe line including testing of joints complete as per cpwd specification and direction of the engineer - in - charge. a) 150 mm dia, providing & fitting fixing shaft sleeve nut of approved quality. (cast iron), providing & fitting fixing of g.i. flange ( 10 mm wall thickness ) by welding with g.i. / ms pipe and placing position as per specification and the direction of the engineer-in- charge.i) 150 mm dia, providing & fitting fixing gland nut / stag nut 100 mm long for gland of approved quality.i) for li, providing and fitting fixing m.s. clamp for hose pipes with nuts & bolts complete as per relevant is specification anddirection of engineer-in-charge.i) 150mm dia, providing & fitting fixing rubber flange washer 6 mm thick at site of work of approved quality.i)150 mm dia, providing and fitting fixing ms foot valve as per relevant is specification and the direction of the engineer-in-charge.. i) 150 mm dia, providing & fitting fixing c.i tail piece of approved quality at site of work.i) 150 mm dia, providing & fitting fixing foot valve leather washer (6 mm thick) of heavy duty at site of work of approved quality.i) 150 mm dia, providing & fitting fixing c.i foot valve spare parts of 125/150 mm dia at site of work of approved quality.a) c.i foot valve weight, b) c.i foot valve ring, c) c.i foot valve net, dismantling of motor fpr vernishing heating etc cpmplete in/c reinstalltion and trail run for two spell complete as per direction of the engineer-in charge., supplying & fitting fixing of spare parts for 20/25 hp horizontal motor.a) motor fan, b) terminal plate, providing and fitting fixing of fully automatic star delta type motor starter ( 3 ph. 50 hz, 415v, 25hp /18.50 kw relay range within 17-25 ) in steel sheet enclosures with contractors and timer etc. complete suitable for motor pump havells/l & t/bch make direction of the engineer-in-charge.i) 25hp/18.5kw relay range within 13-21 +10%, providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for din fuses). triple pole with neutral link ( tpn ) , 415/500 volt complete as per direction of the engi
Tender For corrigendum : supply of bolt hexagonal head m22x125mm steel to is 1364/2002. part-1 grade 8.8with suitable castle nut to is 2232 and spring washer to is 3063/1972 onehole of dia smm to be drilled at a distance of 10mm from the threaded end ofthe bolt. drg. specification:-as per drg mentioned in description.
Tender For supply of m6x25 mm stainless steel hex head screw [m6x25 mm stainless steel hex head screw bolt with nut as per is - 1367 part 14 (1984), grade a2-70 with two flate and one spring washer of make - tvs/dfl/unbrako/lps/tuff or similar.
Tender For corrigendum : rate contract for manufacturing and supply of 1 in 12 bg 60kg weldable cms crossing on psc sl eepers in accordance with rdso's standard drawing no.t- 6412 (alt-5) with latest alteration amended upto dat e of tender notice, including supply of 6mm thick nylon cord reinforced grsp to drawing no. rdso/t-7014 to r dso/t-7021(alt-4), rdso/t8891(alt-1), rdso/t-8892(alt-1), rdso/t-7014/1(alt-4) and rdso/t-7014/2(alt-4) a nd distance block to drg no. rdso t-10091 & 10092, bolt & nut to drg no. rdso t-11505(alt-2) and single coi l spring washer to drg no. rdso t-10773, as per list attached as annexure-1a, all drawings with latest alterati on amended upto date of tender notice and as per "item specific guidelines & schedule of technical requirem ents for vendor approval for manufacture and supply of cast manganese steel (cms) crossings/ weldable cast manganese steel (wcms) crossings- (tdg 0021 ver.2)" and conforming to irs specification for cast manganes e steel (cms) crossings and weldable cast manganese steel (wcms) crossings, serial no. irs: t.29 (revised 2 024). single coil spring washer shall conform to irs t.42-2020, bolts and nuts shall conform to irs specificatio n no.t.23:2021 (redrafted), distance block shall conform to irs-t-10-2025 and gray cast iron fg 200 of is: 21 0 : 2009 (gray iron castings specification) and nylon cord grsp shall conform to irs specification no.t.55-202 3, all specification with latest alteration as amended up to the date of tender notice. [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ]
Tender For supply of hull and ship fitting items e e - putty steel , putty bronze , pipe mat schedule 40 5 inch , bolt nut with washer m12 x 50 mm , ball caster nylon wheel heavy , sheet gi 24g , flat aluminium 20 x 3 mm , flat aluminium 25 x 3 mm
Tender For supply of super duplex stainless steel plates d d - core axial locking key cutting tg9713814010 , plug for water filling dry dock m10 tg9716114060 , cover plate debris removal tg9716114052 , water bearing cap cutting tg9711034026 , srtb outer support ring cutting de tg9716914091 , srtb inner support ring cutting de tg9716914105 , srtb locknut cutting de tg9714874149 , water bearing circlip cutting tg9711164019 , propeller inboard seal ring cutting tg9716914083 , propeller locknut ring washer cutting tg9716114044 , propeller outboard guard cutting tg9716114036 , propeller inboard guard cutting tg9716114028 , water bearing lipseal retainer cutting tg9717114013 , superduplex ss mock up block 12 x 150 x 150 tg9710464213 , cable holder clamp assembly type 1 tg9710043439 , cable holder clamp assembly type 2 tg9710043447 , cable holder clamp assembly type 3 tg9710043455