Latest cloth tape Tenders | Government cloth tape Tenders

CTN :43225474

27 Dec, 2025 NA

Thiruvananthapuram - Kerala

Tender For supply of brass door handle 100 mm , aluminium bow handle 75mm , aluminium bow handle 100mm , aluminium bow handle 150mm , ss l bracket of size 4. 5 x 4. 5 inch , ci bracket for wash hand basin of size 500 mm long 5 mm thick , ci bracket for kitchen sink of size 500mm long 6 mm thick , aluminium floor door stopper 75mm single , corner glass shelf of size 9 inch , glass shelves for bath room of size 12 inch , mortise lock 100 mm , stainless steel plate rack of size 36 x45 x10 inch , hdpe pipe 75 mm dia , hdpe pipe 80 mm dia , hdpe pipe 90 mm dia , glass pane 24 inch x 18 inch x 4mm , glass pane frosted 48 inch x 36 inch x4mm , pre painted gi steel sheet half mm thick tensile strength of 550 mpa size 3 mtr , pre painted gi steel sheet half mm thick tensile strength of 550 mpa as in roof covering , self tapping screw zinc coated 6mm dia 75 mm long with 2 gi washer , looking mirror 600 x 400 mm with ply or pvc frame , non asbestos fiber cement building board of size 600x600mm x 4 mm , paint roller small , paint roller medium , pvc seat cover for verandah chair map , pvc seat cover for dining chair map , cloth tapestry superior quality width not less than 48 icnh , foam cushion for dining chair officer 450 x 450 mm x 75 mm thick 40 d , foam cushion for sofa of size 22 inch x21 inch x 100 mm thick 40d , foam cushion for sofa of size 22 inch x21 inch x100 mm thick 40d , looking mirror for table dressing gents of size 380x760x5mm , looking mirror for table dressing gents of size 750x330x5mm , looking mirror for table dressing ladies of size 1220x380x5mm , hard wood well seasoned clean sawn board for plank not exceed 30cm width length not less than 2mtr and thick 30mm , pre-laminated particle board 8 feet x4 feet x18mm , plywood bwr 6 feet x 3 feet x 12mm , plywood bwr 8 feet x 4 feet x 4mm , plywood bwr 8 feet x 4 feet x 6mm , plywood bwr 8 feet x 4 feet x 12 mm , plywood bwr 8 feet x 4 feet x 8 or 9 mm , plywood ost or teak wood veneer 8 feet x4 feet x6mm , mdf board 8 feet x 4 feet x 18 mm , synthetic enamel paint olive green colour , obd white colour , exterior emulation paint light yellow or off-white , epoxy resin for floor tiles , wood corner beading , wood beading flat patti , upvc ball valve 15 mm , insulation tape 20mm x 25 mtr , danger notice plate ht 25 x 20 cm 1 mm thick , danger notice plate lt 15 x 20 cm 1 mm thick , lightning arrester expulsion type 11 kv discharge cap 65 kilo amp set of three , dropout fuse 3 pole 11 kv 400 amp set of three , change over switch 4 pole 100 amps //bid details2 / 51

State Government

CTN :42813292

23 Dec, 2025 NA

Multi City - Telangana

Tender For corrigendum : tggenco-ytps(5x800mw)-supply of t and p items required for stage-i and chp of ytps. - ac/dc volts (40hz to 500hz):4.000v, 40.00v, 400.0v, 1000v; resistance (ohms): 400.0 ohm, 4.000 kohm, 40.00 kohm, 400.0 kohm, 4.000 mohm, 40.00 mohm; capacitance: 40.00nf, 400.0nf, 4.000 µf, 40.00 µf, 400.0 µf, 1000 µf; ac/dc current: 4.000a, 10.00aac/dc millivolts: 400.0mv; diodetest: 2.000v;ip rating: ip40safety: iec 61010-1, iec 61010-2-030 cat iii 600v, cat ii 1000v, pollution degree 2.temperature: 50-400°c, 0-50°c, -55 to 0°c.temperature: operating: 0°c to 40°c;storage: -30°c to 60°celectromagnetic environment: iec 61326-1:portableincluded accessories: test leads with caps, thermocouple, temperature probe, 2 aa batteries, user manual along with the required calibration certificates.gds 18v-400 cordless impact wrench;battery voltage: 18v; torque max: 400nm; no load speed: 0-3,400 rpm. make: boschfluke true rms ac/dc digital clamp meter with iflex probe and fluke connect modelno: 376digital multimeter, make: fluke, model: 17b+, specifications: ac/dc current 10 amps, ac/dc voltage 1000 voltsmegger, 1kvleakage current clampmeter ac, range (0-100a)portable hot air blowervacuum cleaner, dry, 1300w, 6.1kg, 230v, 50hzvibration meter, digital, model: ird 306analog phase sequence indicator, 100 to 500 v, 25 to 65 hzdigital earth resistance tester with resistivity test facility, earth resistance: 0.01 ohms-200 kohmsplier, nose, 6"/150 mmhammer, 4 lbcutting plier, 12"39 , gds 18v-400 cordless impact wrench; battery voltage: 18v; maximum torque: 400 nm; no load speed: 0-3,400 rpm. make: bosch. , fluke true rms ac/dc digital clamp meter with iflex probe and fluke connect, model no: 376, , digital multimeter, make: fluke, model: 17b+, specifications: ac/dc current 10 amps, ac/dc voltage 1000 volts, , megger, 1kv, , leakage current clamp meter ac, range (0-100a), , blower, portable hot air, , vacuum cleaner, dry, 1300w, 6.1kg, 230v, 50hz, , vibration meter, digital, model: ird 306, , analog phase sequence indicator, 100 to 500 v, 25 to 65 hz, , digital earth resistance tester with resistivity test facility, earth resistance: 0.01 ohms–200 kohms, , plier, nose, 6"/150 mm, , hammer, 4 lb, , cutting plier, 12", , tape, measuring; length: 3 m; material: steel, , tape, 5 meters measuring tape, , tape, 30 meters measuring tape, , hole punch set 22, 20, 18, 16, 14, 12, 10, 8, 6, 4 set of 10 nos (tiger make), , center punch, length: 125 mm, , drilling machine, rated power input: 800w, 240v, drilling diameter in concrete with hammer drill bits: 4-26 mm, , digital motor checker: emc-38, , transformer, auto; type: manual operated variable; input voltage: 240 vac; output voltage range: 0-270 v ac; special features: (dimmerstat) with continuously variable banana terminals, capacity: 20 amps; model: 20d-1p, , transformer, auto; type: manual operated variable; input voltage: 415 v ac; output voltage range: 0-470 v ac; phase: 3; special features: 50 hz; model: 15d-3p, , lux meter, digital, 0-50,000 lux with silicon photodiode sensor, lcd display, dc 9v battery, mandatory accessories, , tachometer, digital; speed range: 9999/99999 rpm; model: v, , digital micro ohm meter, model dmo-100d, , gun, laser, , specifications:, , laser convergence distance: 50" (127cm) ir range: -58 to 3992°f (-50 to 2200°c) emissivity: 0.10 to 1.00 adjustable, , max resolution: 0.1°f/°c, , field of view (distance to target): 50:1

CTN :43170419

23 Dec, 2025 10.00 Lacs

Sonitpur - Assam

Tender For supply of enamel, synthetic, exterior (a) undercoating (b) finishing (v4) confirming to is 2932,enamel, synthetic, exterior (a) undercoating (b) finishing (v4) confirming to is 2932,enamel, synthetic, exterior (a) undercoating (b) finishing (v4) confirming to is 2932,plywood bwr 2400 mm by 1200 mm by 12 mm,plywood is 303 bwr grade of size 7 ft by 3 ft by 12mm 7 ply,well seasoned 2nd class hard wood scantling of size 90mm by 35mm by 2000mm,hard wood well seasoned 10 feet by 3 inch by 2 inch,foam cushion 100mm thick size 53 by 50cm 40 density covered with tapestry cloth,plywood is 303 bwr grade of size 8 ft by 4 ft by 18 or 19 mm,pre laminated mdf board with one side teak face of size 8ft by 4ft by18mm,particle board pre laminated with one teak face 8ft by 4ft by 18 or 19mm,cloth tapestry 48 inch wide 600 gsm,cane plastic 2mm,cane plastic 4mm,shellac best quality chash,block board 8 ft by 4 ft by 19mm,varnish,lock for almirah 6 lever,fevicol sh,thinner,continuous piano hinges 18mm by1 point 8mtr,beading teak wood half ro

CTN :43144767

22 Dec, 2025 NA

Haridwar - Uttarakhand

Tender For supply of handwash , odonil , board pin , name letter , dusting cloth , tape , ink , pen , dish wash , floor cleaner , pencil cell , remote cell , washing powder , rate repellent , petrol , room freshner , harpic , all out , good night