Latest cnc trainer Tenders | Government cnc trainer Tenders

Central Government/Public Sector

CTN :45090268

29 May, 2026 NA

Ambala - Haryana

Tender For improvement to platform surface, upgradation of circulating area,main entry exit gate,vdc flooring and passengers amenties at mandi govindgarh(gvg) station, provision of 12 meter wide fob at dhuri railway station under amrit bharat station scheme on rpj-bti section,augmentation of running room saharanpur,improvement to platform surface, upgradation of circulating area and improvement to passengers amenties at khanna station, ,provision of stp (sewage treatment plant) of capacity 1 mld & sewerage connectivity in old railway colony ambala cantt on umb-klk section,augmentation of infrastructure facilities by repair of building, drainage system etc. and provision of new rooms for wheel lathe and training centre of bcn roh depot,ambala cantt,provision of new station name board of kalanour, pilkhani, memu car shed, dukheri, dhappar, shambhu, ahmedgarh and dhuri station in place of damaged name board,provision of at panels and at cable for ensuring reliable power supply for signalling system under saharanpur,ambala cantt,yamuna nagar jagadhari,chandigarh,kalka,rajpura,dhuri,bathinda,sirhind and nangaladam power depot, interlocking of manned non-interlocked 23 l-xing gates having tvu more than 20000 over ambala division and provision of shower testing facilities at roh depots, ambala cantt & khalanampura.

Central Government/Public Sector

CTN :45086418

26 May, 2026 4.05 Lacs

Koraput - Odisha

Tender For providing of custom bid for services - repair and rectification of faulty siemens single motor module of vertical turret lathe (vtl) machine, asset code: spl00246 installed in 612 shop of 105 hangar of sukhoi engine division

Central Government / Public Sector

CTN :44841660

15 May, 2026 NA

Multi City - Multi State

Tender For corrigendum : comprehensive annual maintenance contract (camc) for cnc axle turning lathe machine (make: askar, quantity: 01 no.) at carriage repair workshop, mancheswar.

Central Government / Public Sector

CTN :45067053

15 May, 2026 NA

Multi City - Multi State

Tender For comprehensive annual maintenance contract (camc) for cnc axle turning lathe machine (make: askar, quantity: 01 no.) at carriage repair workshop, mancheswar.

Central Government/Public Sector

CTN :45040944

11 May, 2026 91.0 Thousand

Medak-T - Telangana

Tender For repair of taper of rh tool post of vertical lathe sk12/1, asset no.202-1006

State Government

CTN :44977863

08 May, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates for non-schedule items for preparing estimates. - s/i/t/c of new 80 hp vt pump set, supplying,installation,testing and commissioning of vt pumpset (confirming to is1710:2021 standards) with 35 ft suitable size ms column pipe assembly in random length of 5 ft.(make-jyoti/wpil/kirloskar) with ss/bronze impeller capable to discharge 216 m3/h against a total head of 68m coupled with vertical solid shaft tefc ie3,ip55 type squirrel cage induction motor (make-siemens/crompton/abb) operating on 3 phase 50 hz,415v+- 10% supply and having speed 1400-1500 rpm (bhp of motor should be 10% more than that of pumpset including cost pof supplying,fitting and fixing of all required accessories, repairing of 80 hp vt pump set at raw water, supplying all labour tools and tackles for taking out the 40hp vt pump set with bowl assembly, column pipe and line shaft etc., cost towards dismantling of complete bowl assembly., cost towards repairing and fitting the parts of vt pumpset as per requirement (works as complete overhauling of the pump) such as:-1.machining/lathe work 2.changing ss top shaft,line shaft(2 nos of 5 feet) of and bottom shaft2.repairing of bowl assembly and impleller3.supplying and fitting c.l spider bearing with rubber cut less bush-4nos4.supplying and fitting of worn-out nut-bolts,bolt-nut washer,gland body bush machining,other machining works,etc as per requirement, complete assembling the pump set and lowering including supplying all petty materials., cost for supplying and installation of required accesories for repair and maintenance of motor control panel such as:-150 amp contactor-2 no (for 1 no starter)160 amp,breaking capacity -36ka mccb 1 no56-90 a electronic overload relay-2 nostimer-2 nosvolt meter 1 nosamp motor 1 nospilot lamp 6 nosselector switch 4 nossingle phase preventer 2 nos[ all accessories of reputed make]with complete internal wiring with suitable size of copper wire and testing on load., repairing of 30hp c/f pump sets at clear water, cost for dismantling of 30 hp c/f and pump inspection,changing of its damaged parts such as:-key-01 no, gland tightner -1 set, gland tightner stud-2 nos, c.i bearing housing with cap -1 set, ball bearing 6306 (skf)-2 nos, grease, gland packing,maching of the pump parts as per required etc all complete and testing on load etc., cost towards complete repairing of motor control panel starter 30hp cf pump set opening and changing of damaged parts such as 1.mccb - 50 amp,25ka,3pole-2 nos (for motor backup protection),mccb -100 amp,50ka,3pole-1 no (main mccb)2.overload relay 26-40 amp-1no3.star delta timer-1no4.digital volt meter,ampere meter,three pahse indicator lamp,push button on/off,on/off/trip indicator,wiring,etc as per required, repairing of 15hp c/f pump sets at clear water, cost for dismantling of 15hp c/f and pump inspection,changing of its damaged parts such as:-key-01 no, gland tightner -1 set, gland tightner stud-2 nos, c.i bearing housing with cap -1 set, ball bearing 6306 (skf)-2 nos, grease, gland packing,maching of the pump parts as per required etc all complete and testing on load etc., cost towards complete repairing of motor control panel starter 30hp cf pump set opening and changing of damaged parts such as 1.mccb -25 amp,15ka,3pole-2 nos (for motor backup protection),mccb -50 amp,25ka,3pole-1 no (main mccb)2.overload relay 20-25 amp-1no3.star delta timer-1no4.digital volt meter,ampere meter,three pahse indicator lamp,push button on/off,on/off/trip indicator,wiring,etc as per required

Central Government/Public Sector

CTN :45019324

12 May, 2026 NA

Multi City - Karnataka

Tender For auction sale of rolling stock - condemned, surplus underaged serviceable wdg3a loco no.13285 (siemens control system) as per annexure. qty as per ds8: 1 no./118.225 mt (approx). (1) sold on as is where is condition, available under the custody of sse/dsl/kjm, as declared vide ds-8 no. 230617 dtd 07.02.2026. (2) location: available at diesel loco shed kjm. temporarily stabled near control room/opp. pit wheel lathe. delivery will be given from shed. (3) delivery by number basis. (4) material- ferrous & non-ferrous composition as per annexure 7(a)/7(b) attached in photos. general condition of loco is as per annexure-7 attached in photos. purchasers should read published depot conditions and survey the material for quantity, location and road approach before bidding to the lot. after bidding no correspondence will be entertained. neighboring undeclared and nfs items shall not be disturbed. (5) hsd/lube oil if found to be either returned to railways or an amount equivalent to the cost as advised by sr.dee/trs/kjm, to be remitted to railways. (6) engine haulage charges for the movement of engines on private account is applicable with consultation with commercial & operating department as advised by sr.dcm/sbc & sr.dom/sbc and siding charges if any are to be paid by the purchaser in addition to the purchase cost of locomotive. the loco number and its ownership will be changed from railways to the name of the purchaser after sale by operating department in fois etc to enable the movement of the loco in dead condition over ir system on request from the purchaser. (7) date of handing over of locomotive to the buyer shall be deemed as delivery date and the locomotive shall be deemed delivered to the buyer. if the buyer so desires, he can get the locomotive serviced and overhauled in railway workshop or diesel shed on payment basis. such repairs will be carried out only after the locomotive has been sold to the buyer i.e after balance sale value payment , sale proceeds have been received and locomotive has been handed over. the cost of such service/repair will be advised by sr.dee/trs/kjm. (8) bidders are allowed to pay balance sale value in instalments as applicable under uniform e-sale conditions and depot conditions i.e, 1 instalment for lots upto rs.5 lakhs and 2 instalments incase of lots exceeding rs.5 lakhs and upto rs.15 lakhs and 3 instalments incase of lots exceeding rs.15 lakhs. but delivery order will be issued only after realization of payment of final instalment. as per our depot condition para 18- delivery will be given on first come first serve basis. (9) prior to balance sale value payment purchaser is requested to coordinate with sr.dee/trs/kjm 9731666450 for the availability of custodian sse/dsl/kjm 9731666474/9731666459/9731666482.

CTN :44938941

30 Apr, 2026 NA

Kanpur - Uttar Pradesh

Tender For repair and overhauling service - repair of cnc lathe machine; repair of cnc lathe machine; yes; buyer premises, service provider premises

CTN :44483264

17 Apr, 2026 NA

Khorda - Odisha

Tender For bid to ras corrigendum : supply of supply installation and commissioning of fire fighting materials m -flange type nrv 150mm , flange type nrv 80mm , flange type nrv 65mm , butterfly valve of 100mm , butterfly valve of 80mm , pressure switches , pressure gauges , jockey pump relay , pendent sprinkler , battery 12 volts for dg set , addressable smoke detector , addressable manual call points , addressable hooter with strobe , disel engine will completely overhauling , gate valves are to be repair on lathe

Central Government/Public Sector

CTN :44894192

28 Apr, 2026 NA

Multi City - Karnataka

Tender For corrigendum : auction sale of rolling stock - condemned, overaged serviceable wdm3a loco no.14007 (medha control system) as per annexure. qty as per ds8: 1 no./108.594 mt (approx). (1) sold on as is where is condition, available under the custody of sse/dsl/kjm, as declared vide ds-8 no. 230612 dtd 07.02.2026. (2) location: available at diesel loco shed kjm. temporarily stabled near control room/opp. pit wheel lathe. delivery will be given from shed. (3) delivery by number basis. (4) material- ferrous & non-ferrous composition as per annexure 1(a)/1(b) attached in photos. general condition of loco is as per annexure-1 attached in photos. purchasers should read published depot conditions and survey the material for quantity, location and road approach before bidding to the lot. after bidding no correspondence will be entertained. neighboring undeclared and nfs items shall not be disturbed. (5) hsd/lube oil if found to be either returned to railways or an amount equivalent to the cost as advised by sr.dee/trs/kjm, to be remitted to railways. (6) engine haulage charges for the movement of engines on private account is applicable with consultation with commercial & operating department as advised by sr.dcm/sbc & sr.dom/sbc and siding charges if any are to be paid by the purchaser in addition to the purchase cost of locomotive. the loco number and its ownership will be changed from railways to the name of the purchaser after sale by operating department in fois etc to enable the movement of the loco in dead condition over ir system on request from the purchaser. (7) date of handing over of locomotive to the buyer shall be deemed as delivery date and the locomotive shall be deemed delivered to the buyer. if the buyer so desires, he can get the locomotive serviced and overhauled in railway workshop or diesel shed on payment basis. such repairs will be carried out only after the locomotive has been sold to the buyer i.e after balance sale value payment , sale proceeds have been received and locomotive has been handed over. the cost of such service/repair will be advised by sr.dee/trs/kjm. (8) bidders are allowed to pay balance sale value in instalments as applicable under uniform e-sale conditions and depot conditions i.e, 1 instalment for lots upto rs.5 lakhs and 2 instalments incase of lots exceeding rs.5 lakhs and upto rs.15 lakhs and 3 instalments incase of lots exceeding rs.15 lakhs. but delivery order will be issued only after realization of payment of final instalment. as per our depot condition para 18- delivery will be given on first come first serve basis. (9) prior to balance sale value payment purchaser is requested to coordinate with sr.dee/trs/kjm 9731666450 for the availability of custodian sse/dsl/kjm 9731666474/9731666459/9731666482.

Cnc Trainer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors