Latest coating item Tenders | Government coating item Tenders

State Government

CTN :40398381

24 Jun, 2025 NA

Guwahati - Assam

Tender For corrigendum : empanelment of agencies for supply of laboratory instruments for various water testing laboratories under jal jeevan mission, assam - ion meter with electrode and accessories for fluoridemeter: ph/ise benchtop meter with electrode stable, universal power adapter, literature, pc cable, meter test certificate electrode: ionplus fluoride and nitrate combination ion selective electrode, 1m cable, waterproof bnc benchtop ion meter (ise) along with fluoride, nitrate #electrode range: -2.000 to 20.000 resolution 0.1, 0.01, 0.001 relative accuracy 0.002 calibration points up to 5 calibration editing yes #mv/ rmv orp range 2500.0 mv resolution 0.1 relative accuracy 0.2 mv or 0.05 % of reading whichever is greater eh orp mode yes ise range 0 to 19999 resolution up to 3 significant digits relative accuracy 0.2 mv or 0.05 % of reading whichever is greater units ppm, m, mg/l, %, ppb, none calibration points up to 5 calibration editing yes calibration features timed end point, linear point to point, non-linear selectable auto-blank, low concentration range stability #temperature range -5 to 105 c, 23 to 221 f resolution 0.1 relative accuracy 0.1 offset calibration 1-point datalogging memory 2000 with time and date stamp log function manual, ready (include auto-read ), timed log edit delete individual points, group of points or all inputs ph electrode bnc, reference pin atc probe 8-pin mini-din #output rs232, usb power ac adapter included universal, 100-240 vac battery power optional 4 aas battery life 800 hrs, fluoride electrode of ion metersame make that of the ion meter, manifold filtration assembly* wide range of pumps and filtration flasks * high quality components * easily exchangeable elements *maintenance-free * low noise * added filters for enhanced pump longevity * filtration base with silicon stopper, cap & aluminium clamp connecting silicon tube technical specification for filtration flask set # high-pressure resistant tube # fiberglass filter membranes (47mm / 0.1 m) # ptfe disc filter #normal liquid filtration * specification for filtration glass set #suction bottle capacity(ml) 1000 ml # filter diameter(mm) 47/50 mm # * specification for filter flask * material: statinless steel 304, capacity: 300 ml (100 ml each) [ unit should consist of 3 flask so that 3 sample can be filtered simultanelously without any issue] # effective filtration area(cm2) = 9.6 cm2, outlet connector(mm) = 8 mm * specification for vaccum flask: #flow rate of the pump(l/min) = 17 l/minultimate vacuum(mbar) = 150 mbar # oil free, maintainance free, built in thermal protection to shut off when over heated., auto cut heater for distill water plant so that when water level decreases the heater is switch off automatically, voltage stabilizer capacity- 3 kva servo stabilizer 5 star rating, heating mantle (single station) should have digital energy regulator with multiple step power regulation automatic spill detection and saftey shutdown in built precision temperature control technial specification: flask capacity 250 ml, working temp range: ambiant + 5 to 420 degree celcius. accuracy: plus minus 1.0 degree celcius, power consumption : 150 w, heating mantle (combined unit) material of construction heating block: made with grade epoxy painted chemical resistant coating, aluminum block with 6 thermo wells for processing 6 different samples at a time. #racks: ss 316 # glassware: teflon coated # temperature range ambient + 10 deg c to 450 deg c # stability of temperature better than 0.5 deg c # controller consist of digital read out of temperature and time with 4 programmable ramps for each method. # number of programmable methods 20 numbers. # heating powers 1000w # heating position minimum 6 position # digestion time range -1 to 999 minutes # the system should have facility of acoustic signal at the end of completion of cycle to notify the operator. # the thermal digestion unit should have high thermal homogeneity # the setup should have small f

Central Government/Public Sector

CTN :40025184

18 Jun, 2025 45.55 Lacs

Bhopal - Madhya Pradesh

Tender For bid to ras bid to ras supply of spares for hvof coating system - barrel, part no. 1051230 , burner assy, part no.1051224 , middle gun body, part no. 1041806 , combustion chamber, part no. 1051211 , powder injector, part no. 1041807 , blasting nozzle, part no. 1015535 , oxygen check valve, part no. 1041800 , fuel fitting, part no. 1041803 , hydrogen fitting, part no. 1049884 , water fitting, part no.1001822 , complete gun 610, part no. 1070684 , stirrer with paddle, part no. 1003336 , powder feeder pipe, part no.1001908 , hydrogen pipe, part no. 1041821 , oxygen pipe, part no.1041818 , o-ring for barrel front, part no.1020266 , o- ring for barrel rear, part no. 1041816 , o-ring for c.h. rear, part no.1000362 , o-ring for c.h. front, part no. 1000225 , o-ring for middle gun body, part no 1017589 , o- ring for burner rear, part no.1015535 , o-ring for burner front, part no.1006446 , o-ring for plug, part no. 1001493 , o-ring for double tooth clutch, part no.1008297 , o-ring for pinion, part no. 1003205 , o-ring 85.32x3.53, part no. 1003221 , o-ring 92x2, part no.1003220 , o-ring 85x5, part no.1003218 , o-ring 44x2, part no.1003326 , o-ring 52x2, part no. 1003222 , o-ring 164.47x5.33, part no. 1003217 , o-ring 19x3, part no.1003281 , o-ring 26x3, part no. 1003280 , o-ring 42x1.5, part no. 1003287 , o- ring 37.1x1.6, part no. 1003286 , dust seal 20x28x7, part no. 1003213

CTN :40521848

17 Jun, 2025 NA

Delhi - Delhi

Tender For bid to ras corrigendum : repair, maintenance, and installation of plant/ systems/equipments (version 2) - office space; supply installation commissioning of equipments and devices for storage; buyer-providing compactors made out of 0.8mm thick crca steel conforming to is: 513 gr. d each unit have 4 loading levels formed by 3 nos . adjustable shelves . body units are bolted to under carriage . optimizer height form ground is 2080 mm (1980 body + 65 undercarriage +35 channel system) the body i /c shelves are given antirust surface treatment & are powder coated with epoxy polyester powder. it involves treatment consisting of hot water rinse. knock of degreasing, cold-water rinse, phosphating ,cold water rinse , passivation & dry off oven treatment. final finish consists of epoxy polyester powder coating of approved color & shade with a dry film thickness of minimum 40 microns . the testing of paint is done for various physical & chemical properties as per is: 101. the material is the oven backed with a controlled temperature of 180 deg. c . to 200 deg . c. it is made of 0.8 mm thick crca steel conforming is is : 513 gr . d or dd its max load bearing capacity is 80 kg uniformly distributed per shelves are mounted on support bracket & shelf level can be adjusted at approx. 25.4 pitch . there are 3 adjustable shelves per body given per body given 4 loading levels , if bi cradle pair is provided the under carrying is a welded frame made of hr sheet 3.15 mm thick conforming to is : 10748 suitably fabricated to take the loads based on configuration . a centralized locking arrangement is provided through locking stiffener mounted on to back of single last unit so that it gets locked on channels when all the units are brought together. 10 bodies.

CTN :40694243

07 Jul, 2025 NA

Khandwa - Madhya Pradesh

Tender For supply and installation of biotechnology instruments - bod incubator with stabilizer:- features available in bod incubator - toughened glass window ,air circulation fan ,removable tray ,temperature,sensor ,door hinges ,pid temperature controller. 2 optional features available in bodincubator stainless steel perforated trays no of trays 3 air circulation motorized blowerexterior body material mild steel and painted in epoxy powder coating insulation material glass woolouter door material mild steel inner door material material of removable traytoughed glass material of removable tray stainless steel wire mesh tray chamber capacity(in ltr) 250-299 thickness of sheet (in mm ) 0.7 thickness of toughed glass/acrylic sheet (in mm ) 7 diameter of stainless steel wire in mesh ( in mm )3 temperature range 10 c to 70 c temperature accuracy 0.5 ctemperature uniformity 1 c., cooling centrifuge 20000 rpm with rotator head and stablizer :- type of motor brushless(without carbons)type of lid lock both manual and electronicno of acceleration and deceleration profiles in built for rotor speed while automatic brakingoption to accelerate and decelerate speed at various rates configuration of rotor supplied with centrifuge machine angle rotorsize of rotor supplied with centrifuge in ml"12x15ml(for angle rotor) rpm 13000"warranty period for equipment & roto condensed water drainage system,the equipment shall be installed and demonstrated before acceptance, servo controller voltage stabilizer supplied with item, deep freezer with stabilizer :- type vertical features puf insulation,frost free capacity ( l) >=250l temperature range in c -10 c to -40 c or better temperature uniformity in degree celsius +/- 3 c or lesstemperature stability of system in degree celsius +/- 3 c, rotatary shekar incubator with stabilizer :- castor wheels ,range of temperature5 degree centigrade to 60 degree centigradetype of display lcd, type of speed controlstepless continuously variable,orbital shaking amplitude in mm25 mm,type of flask which can be accommodated 100 ml ,250 ml ,500 ml ,1000 ml ,2000 ml, interior illumination led bulbs,construction of body double walled with inner and outer walls,door insulated double walled door with glass window,internal length of equipment in mm 765internal width of equipment in mm 660internal height of equipment in mm 650outer length of equipment in mm 1150ouiter width of equipment in mm 800outer height of equipment in mm 1300,range of temperature 5 degree centigrade to 60 degree centigradetemperature accuracy plus minus 0.5 degree centigradetemperature controller microprocessor based digital temperature controller and indicatortype of sensor pt -100,type of motor brushless motorshaking mechanism controller microprocessor controllerorbital shaking speed in rpm upto 250type of speed control stepless continuously variableincrement of step variation 10orbital shaking amplitude in mm 25 mmtimer adjustment in hours 99, autoclave vertical :- chamber capacity/size approx. 80-120 litersoperating pressure 15 - 20 psipressure gauge type analog pressure gauge (0 - 400) psi temperature accuracy +/- 0.5 c (at 121 c)operating temperature (max) 123 c features automatic start/stop timer,low water level heater cut-off and alarms,over pressure cut-off with audio-visual alarm,low heat warning,inner temperatureindicator,over temperature cut-off with audio-visual alarm,door cannot unlock until chamber pressure reaches room pressure,temperature calibrationfunction spares & accessories perforated corrosion free basket made up of ss 304 (3-4 nos) that arestackable two high or more levelsadditional requirement calibration certicate from iso17025 accredited lab for temperature,pressuregauges & timer, heating element multicombine:- power source electric material ceramicapplication heating shape rectangulardimension diameter 200 millimeterwidth 200 millimeter thickness 8 millimeterlength 600 millimeter specications resistance 5 operating power 100 ki

CTN :40686533

03 Jul, 2025 NA

West Tripura - Tripura

Tender For procurement of coating material for natural gas pipeline -coating system (primer + inner wrap + outer wrap)

CTN :40692476

26 Jun, 2025 NA

Srinagar - Jammu And Kashmir

Tender For diagnostic and therapeutic items for cardiac cath lab (group b) - manifold with two side ports for ptca (fda/ce approved), manifold with three side ports for ptca (fda/ce approved), teflon coated guide wires (j-tip & straight-tip) standard length-145 or 150cm (fda/ce approved), teflon coated guidewires(j-tips & straight-tip) exchange length-260 or 300cm (fda/ce approved), femoral introducer sheath with puncture needle for adults (sizes 5 - 11 fr.) standard length; 10-16-25 cm long; 0.021 or 0.025-inch guide wire compatible. material of sheath tubing should be made of etfe, cross cut valve should be made up of silicon rubber & should have silicone coating. dilator tube should be made up of polypropylene and should have silicon coating. must have with haemostatic crosscut valve; with integrated side arm with attached 3-way stopcock; with suture eye for securing sheath and click sound; kink resistant. must have with dilator-hub lock mechanism to prevent its back-out during insertion; pack must include with or without metallic needle usfda approved, long introducer sheath (20-50cm long) (fda/ce approved), extra-long introducer sheath (>50 cm) (fda/ce approved), radial introducer kit with puncture needle for adults (sizes 5 - 7 fr.) standard length 7 cm long; 0.035 or 0.038-inch guide wire compatible, include surflash 20g*2 entry needle (plastic iv catheter) and 0.025 mini plastic guidewire must have etfe sheath tubing, dilator tube should be made up of polypropylene and should have silicon coating.should contain a haemostatic crosscut valve to prevent back leak of blood and aspiration of air; with integrated side arm with attached 3-way stopcock., trans radial coronary diagnostic catheter (us fda approved) of various lengths, syringe for pressure injector-150ml with pressure tubing compatible with the available system in the cath lab(medred-mark-7) arterion, high pressure connecting tubing up to 50 cms long for pressure syringe, a). coronary diagnostic angiography catheter(judkins type- left and right) (us fda, b). coronary diagnostic angiography catheters ( judkins type) europeance approved), a). diagnostic coronary angiography catheter(amplatz type- left and right) (us fda), b). diagnostic coronary angiographic catheter ( amplaz type left & righce approved), pigtail catheters (fda/ce approved), short pigtail for pericardiocentesis, diagnostic multipurpose catheters (fda/ce approved), nih catheter (fda/ce approved), ima catheter (fda/ce approved), ptca inflation device-analog display (balloon inflationdevice analog display, 30 atm pressure with tubing and 3way stopcock) (fda/ce approved), y-connector set with extension tubing tuohy burst, pci,needle and 3-way, special y-connector set with both fixed and haemostaticvalve with upto 10 fr inner diameter, pci needle with/without torquer device, disposable plastic sterile luer lock syringer for angiography and ptca (leur lock), large lumen ptca guiding catheters of 5 to 8 fr sizes-fda approved, large lumen ptca guiding catheters of 5 to 8 fr sizes-ce approved, brk needle (fda/ce approved) for paediatrics/adults, embolic protection (distal protection) device (epd) for ptca (fda approved), embolic protection (distal protection) device (epd) for ptca (ce approved), manual thrombosuction catheter for ptca (fda approved), manual thrombosuction catheter for ptca (ce approved), radial artery compression device, cross over arterial sheaths(fda approved), snare loop (fda approved), snare loop (ce approved), micro grabber (fda approved), micro grabber(ce approved), intra vascular retriever snare of various sizes with single foldable loop, intra vascular retriever snare-two loops (gooseneck type), intra vascular retriever snare-three or more loops (gooseneck type), pericardiocentesis kit (fda/ce approved), pigtail catheter with multiple markers (fda approved), rotalink plus system, rotalink pro system, rotalink guidewire, intracoronary pressure wire (ffr) for ptca-compatible with

CTN :40693318

11 Jul, 2025 NA

Delhi - Delhi

Tender For purchase of consumable items group d pediatric cardiac catheterization and interventions on 2 year rate contract basis for the department of cardiology - group d1 puncture needle & introducer sheath for neonates & children, item no. 1: intravenous cannula for neonates, item no. 2: intravenous cannula for children & adults, item no. 3: puncture needle for neonates & children, item no. 4: micropuncture needle with stainless steel guidewire for neonates & children, item no. 5: micropuncture needle with hydrophilic guidewire for neonates & children, item no. 6: micropuncture introducer set for neonates & children, item no. 7: introducer sheath with introducer wire for children, item no. 8: introducer sheath with straight introducer wire for children, item no. 9: introducer sheath with j tip introducer wire for children, item no. 10: introducer sheath with hydrophilic guidewire for children, item no. 11: special introducer sheath with extrathin wall, item no. 12: chiba or chiba type puncture needle for fetal interventions, diagnostic catheters for neonates & children, item no. 1: judkins catheter for children, item no. 2: special judkins coronary catheter with smaller curves for children, item no. 3: pigtail catheter for children, item no. 4: angled pigtail catheter for children, item no. 5: marker pigtail catheter for children, item no. 6: multipurpose catheter for children, item no. 7: picard catheter for children, item no. 8: cobra catheter for children, item no. 9: cournand catheter for children, item no. 10: nih catheter for children, group d3 (special diagnostic catheters for neonates & children), item no. 1: balloon floation catheter (swan ganz type) for neonates and infants, item no. 2: balloon floation catheter (swan ganz type) for children, item no. 3: balloon tipped angiography (berman) catheter for neonates, infants, item no. 4: balloon tipped angiography (berman) catheter for children, item no. 5: reverse berman catheter, item no. 6: diagnostic catheters with special hydrophilic coating, item no. 7: renal double curve catheter, item no. 8: head hunter catheter, item no. 9: simmons/ sidewinder catheter, item no. 10: sos omni selective catheter, group d4 (guiding catheters for neonates & children), item no. 1: judkins right coronary guiding catheter for neonates & children, item no. 2: renal guiding catheter for neonates & children, item no. 3: multipurpose guiding catheter for children, item no. 4: special guiding catheters (other than judkin s coronary curves), item no. 5: guiding catheters with hydrophilic coating for neonates and children, item no. 6: special short length guiding catheters for infants and children, group d5 (long sheath for interventions), item no. 1: mullins sheath without side arm of 4- 9 fr sizes for structural intervention, item no. 2: mullins sheath with side arm: 4- 8 fr, item no. 3: mullins sheath with side arm: 4-8 fr, item no. 4: mullins sheath with side arm: 9- 12 fr, item no. 5: mullins sheath with side arm:>12 fr size, item no. 6: long sheath with side arm:hausdorf curve, item no. 7: long sheath with side arm:balkin curve, item no. 8: special long sheaths with side arm: other than mullins curve, item no. 9: special braided long sheaths with side arm: other than mullins curve, item no. 10: long sheaths with deflectable tip, item no.11: long sheath for carotid intervention, group d6 (valvuloplasty balloon), item no. 1: percutaneous transluminal valvuloplasty balloon (low burst pressure) manufactured in india, item no. 2: percutaneous transluminal valvuloplasty balloon (low burst pressure) usfda approved, item no. 3: percutaneous transluminal valvuloplasty balloon (low burst pressure) ce marked, item no. 4: percutaneous transluminal valvuloplasty balloon (low burst pressure) manufactured in india, item no. 5: percutaneous transluminal valvuloplasty balloon (low burst pressure) usfda approved, item no. 6: percutaneous transluminal valvuloplasty

State Government

CTN :40684471

26 Jun, 2025 18.15 Lacs

Vijayawada - Andhra Pradesh

Tender For procurement of electrical materials for regular electrical maintenance works in all floors of sldc building, ground, first & second floors of main building vidyut soudha and ground & first floors of appcc building in vidyut soudha premises, vijayawada - supply of 36 wrecessed / surface mounting 2' x 2' (600x600 mm) led luminaire made of crca sheet housing with powder coated with acrylic diffuser, constant current driver as per is: 15885 (part 2/ sec 13) : 2012 , with operating voltage range of 150 to 265 volts ac, p.f > 0.9, surge protection: 2kv, thd<10%, with high power leds, having system efficacy of >=100 lumens / watt, cct: 3000k - 5700k, minimum cri>70, .etc., complete crompton make., supply of 22 w led slim panel round /square suitable for recessed / surface mounting made of diecastaluminum body with powder coating, acrylic diffuser with driver as per is: 15885 (part 2/ sec 13) : 2012, operating voltage range of 150 to 265 volts ac, p.f > 0.9, surge protection: 2kv, thd<10%, with high power leds, having system efficacy of >=100 lumens /watt, cct: 3000k - 5700k, minimum cri>70, .etc., complete crompton make., supply of 18 w led slim panel round /square suitable for recessed / surface mounting made of diecastaluminum body with powder coating, acrylic diffuser with driver as per is: 15885 (part 2/ sec 13) : 2012, operating voltage range of 150 to 265 volts ac, p.f > 0.9, surge protection: 2kv, thd<10%, with high power leds, having system efficacy of >=100 lumens /watt, cct: 3000k - 5700k, minimum cri>70, .etc., complete crompton make., supply and transportation of150w led street light luminaire made of pressure diecastaluminum body with powder coated, having protective toughened glass, supply input voltage 120 - 270v ac, p.f > 0.90, high power leds having system efficacy >= 120 lumens/watt and junction temperature < 70c, with ingress protection ip66, luminaire performance complies to is 10322 (part 5/sec-3), driver surge protection 4kv, in-house additional surge protection 10 kv with optics distribution, thd<10% at 110 volts ac, driver efficiency >90%, cct: 3000k - 5700k, minimum cri>70, etc., complete with earth connection and not less than two years warranty. a) luminaire make : wipro(skyline) / philips (greenline extra) / ge- venture / crompton(nexus / hawk series) / bajaj (edge) / halonix (modular/ lumos-super) / havells (endura series)/greenlites(hi-lux) /capart(premium)/polycab/keselec / hpl(city vision)/jaquar (premium) /eveready /surya (pollux) / fortune arrt (leaf) / rhino(gpsl06) b) led make :philips lumileds / cree / nichia / osram / samsung / lg., supplyof 24w, not less than 1100mm length led batten light with extruded aluminum housing and polycarbonate cover, input voltage ac 220 - 260 volts, with high power leds, having system efficacy of >=100 lumens/watt , pf>0.9, surge protection: 2kv, thd<15%, with inbuilt driver and frosted cover cct: 3000k - 5700k, minimum cri>70, etc., complete crompton make., supply and transportat of led 18 w stylus surface led light slim panel round /square ., , , supplyof 24w, not less than 1100mm length led batten light with extruded aluminum housing and polycarbonate cover, input voltage ac 220 - 260 volts, with high power leds, having system efficacy of >=100 lumens/watt , pf>0.9, surge protection: 2kv, thd<15%, with inbuilt driver and frosted cover cct: 3000k - 5700k, minimum cri>70, etc., complete crompton make., supply and transportat of led 18 w stylus surface led light slim panel round /square ., ,

CTN :40704122

04 Jul, 2025 NA

Tawang - Arunachal Pradesh

Tender For supply of sqmm single core as per store list , cable xlpe insualted screened pvc bedded, galvanised steel strip or wire armored electric power cable of size 50 sqmm 3.5 core as per store list , switch piano 5 amp 230 volts flush type one way snow white make- anchor,ssk,cona,isi equivalent , switch socket combination snow white multipurpose 2 in 1, 15a, 230v make-anchor,ssk,cona,isi equivalent , led tuble light fittings 15w 230v box type 4 feets with crca body pre coated white and prewired for led tuble complete as per store list , screw full thread 6x19 mm isi marked 200 screw per pkt , pvc switch board snow white of size 7inchx4inch for socket and switches make-supreme,polycab,finolex,isi equivalent , ceiling rose three terminal snow white make- anchor,ssk,cona,isi equivalent , pvc round,squire block make-polycab,supreme,finolex,isi equivalent , distribution box 4 way, double door spn 240 volts copper bus bar and neutral link earthing stud as per store list , service cable pvc insulated aluminium conductor, 1100 volt grade heavy duty 6 sqmm 2 core as per store list , earthing plate 600x600x6mm galvanised steel suitable for gi strip fittings, drilled with two nos holes for 6 mm dia near one side , ci earthing pit cover of size 300x300x6mm with angle iron isa 20x20x3mm thick ms frame , funnel fitted with 20mm dia gi pipe 1.5m long make-jindal,tata, kalinga,isi equivalent , galvanized iron strip 32 x 6 mm , charcoal , salt normal , cement 43 grade opc packed in hdpe bag each 50 kg wt conform to is 8112-1989 make-birla gold,ambuja,ultratech,isi equivalent , coarse sand free from vegetation qty 1.6 cum , coarse aggregate 20mm graded qty 1.6 cum , coarse aggregate 40mm graded qty 1.6 cum , coarse aggregate 20mm graded qty 0.75 cum , stone for rr masonary less than 6inch , pre painted galvatume aluminium zinc coating gi based corrugated steel sheet 0.50 mm thick size 8feetx3feet as per store list , ms pipe med grade 50mm dia confirming to is 1611-1998- jindal,tata,sail,isi equivalent qty - 33.10 rm , self driving scrw for ppgi sheet 100 nos,pkt , funnel fitted with 20mm dia gi pipe 1.5m long make-jindal,tata,kalinga,isi equivalent , coarse sand free from vegetation qty- 0.40 cum , coarse aggregate 20mm graded qty - 0.40 cum , coarse aggregate 40mm graded qty - 0.40 cum , coarse aggregate 20mm graded qty - 0.75 cum , anti corrosive red oxide zinc chromate primer confirming to is 5-2004 make- berger,asian,nerolac,isi equivalent , cable xlpe insualted screened pvc bedded, galvanised steel strip or wire armored electric power cable heavy duty of size 50 sqmm 3.5 core as per store list , pvc round,squire block ,make- polycab,supreme,finolex,isi equivalent , coarse aggregate 40mm graded qty -0.40 cum supply, installation, testing and commissioning of 40 kva cpcb iv+ compliant genset , efficient crdi system 02e series as per specification and store list att job 2791, cement 43 grade opc packed in hdpe bag each 50 kg wt conforming to is 8112-1989 make-birla gold,ambuja,ultratech,acc,jk,dalmia,isi equivalent, coarse sand free from vegitation, coarse aggregate 20mm graded, coarse aggregate 40mm graded, hard core 40 to 63 mm graded, stone for rr masonary less than 6 inch, pre painted galvatume aluminium zinc coating gi based corrugated steel sheet 0.50 mm thick of size 8feetx3feet as per store list, ms pipe med grade 50mm dia confirming to is 1611- 1998- jindal,tata,sail,isi equivalent, painting brush 4inch isi marked, anti corrosive red oxide zinc chromate primer confirming to is 5-2004 make -berger,asian,nerolac,isi //bid details 2 / 84 equivalent, synthetic paint enamelled og confirming to is 5-2004 make-beger, asian,isi equivalent, thinner, self driving scrw for ppgi sheet 100 nos, pkt, iron welding rod confirming to is 814-2002 isi marked 3.15mm thick 100 nos,pkt, mcb spn 240 volts 32 amps make-havells,l and t,standard,isi equivalent, mcb sp 6 to 32 amps make- havells,finolex,polycab,natural white or equivalent, pvc tape 19mm wide 5m long

CTN :40698695

10 Jul, 2025 NA

Multi City - Multi State

Tender For revamping & upgradation of sand coating plant of complete sand system in mould room at rwp/bela

Coating Item Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government