Latest coating service Tenders | Government coating service Tenders

CTN :39090214

01 Feb, 2025 NA

Ernakulam - Kerala

Tender For s.253/25 a gym equipments for fitness centre in div 25 - purchase of gym equipments, spinbikespin bike - supply, installation, testing and commissioning of spin bike having the following specifications:assembly (lxwxh): 1350 x 540 x 1250 mm. net weight: 54 kgs. max. user weight: 180 kgs. crank: 3-pc heavyduty cranks. flywheel: 19 kgs., 450mm dia. die-casting.otherfeatures:beltdriven,cro-molyaxle.functions:emergencycaliperbrakingwithtensioncontrol system, stainless steel slider for horizontal micro adjustable handlebar, 6 ranges horizontal /heightadjustable front post, 11 ranges height adjustable seat post. scratch proof anti corrosive surface coating ofthickness not less than 80 microns, preferably fusion bonded epoxy coating. premium quality equipment, legcurl&extension supply,installation,testingandcommissioningofcommerciallegcurlandlegextensionhavingthefollowingspecifications:size(lxwxh):1650x1145x1645mm. net weight: 232 kgs. steel tubing (d type): 70 x 130 mm. steel tubing flat oval: 50 x 120 mm. steelthickness: 3.0 mm. frame colour: silver. pulley: 105 mm (dia.).seat material: pu with once forming technology. seat colour: black. seat adj.system: 5 level (0~100mmrange). weight stack: 60 kgs. weight material: alloy steel. high quality rubber boots are used at the ends ofthe base pipes to avoid damage to the gym floor. scratch proof anti corrosive surface coating of thickness notless than 80 microns, preferably fusionbondedepoxycoating.pinloadedmachine.premiumqualityequipment., crossovercommercial cable cross over machine - supply, installation, testing and commissioning of commercial cablecrossovermachinehavingthefollowingspecifications:size(lxwxh):4470x1090x2310mm.netweight:396 kgs. weight plates: 60 x 2 kgs. pulley: 6.0 mm. steel tubing: 50 x 100 mm. steel thickness: 2.5 mm. seat:high density pu. weight material: cast iron. high quality rubber boots are used at the ends of the base pipes toavoid damage to the gym floor.scratch proof anti corrosive surface coating of thickness not less than 80 microns, preferably fusion bondedepoxy coating. special high density pu handle grips. 4 integrated weight storage horns to hold multiple weightplates - rubber sheet for floor protection - multiposition pull up bars - multiposition pulley columns which canallow single and dual exercise options - standard accessories: 1ft flat revolvement bar, 1ft curl revolving bar, vbar, d bar, tricep rope (1 set each) - steel sheet fully covered front and back shroud. premium qualityequipment, abcoremachinecommercial abdominal - supply, installation, testing and commissioning of commercial abdominal having thefollowingspecifications:size(lxwxh):1210x1155x1645mm.netweight:198kgs.steeltubing(dtype):70x 130 mm. steel tubing flat oval: 50 x 120 mm. steel thickness: 3.0 mm. frame colour: silver. pulley: 105 mm(dia.) seat material: pu with once forming technology. seat colour: black. seat adj.system: 5 level (0~100mmrange). scratch proof anti corrosive surface coating of thickness not less than 80 microns, preferably fusionbonded epoxy coating. pin / plate loaded machine. premium quality equipment., chestpressmachineflwcommercial chest press - supply, installation, testing and commissioning of commercial chest press having thefollowingspecifications:dimension(lxwxh):1040x1360x1530mm.netweight:97.1kg.weightstack:60kg.tubing: main frame tube is primarily at thickness 2.5 mm, functional parts uses 50*100 rectangular tube.shroud: the cage is adopted with single sided abs translucent plastics with excellent durability and impactresistance. upholstery: chest pad, back pad and seat cushion are adopted with polymer material. durable cablecapable of using more than 250 thousand times. includes cup holder. ergonomic handle bars adopted with tpvmaterials and designed with aluminium ring. fastener: all standard components are made from galvanized orstainless steel materials. adopted with high end pulley with bearing of less tolerance. must meet en957 safetyregula

Central Government / Public Sector

CTN :39074391

07 Feb, 2025 NA

Barauni - Bihar

Tender For electrical insulation coating on floor in ss-27 of barauni refinery.

State Government

CTN :39061757

06 Feb, 2025 1.73 Lacs

Jabalpur - Madhya Pradesh

Tender For supply of hardware and water supply fitting for adm complex at mppmcl jabalpur - hydraulic door closer: supply of over head type hydraulic door closer as per is:3564 model universal type double speed with latch action of hyper (pc-70 double speed) make suitable up to 80 kg. wt. of door shutter in silver colour finish complete sample approved by engineer-in-charge., twin rubber stopper: supply of aluminium hanging floor door stopper isi marked anodised (anodic coating not less than grade ac 10 as per is: 1868) transparent or dyed to required colour and shade complete sample approved by engineer-in-charge., aluminium towerbolt: supply of aluminium towerbolts isi marked anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade of size 4 complete sample approved by engineer-in-charge., aluminium towerbolt: supply of aluminium towerbolts isi marked anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade of size 6, aluminium handle: supply of aluminium handles isi marked anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade of size 6 complete sample approved by engineer-in-charge., supply of s.s. screw size 30/7, supply of 1.5 nail (14 no.), supply of 2 nail (14 no.), supply of 2.5 nail (14 no.), supply of 1 nail (14 no.), supply of 1 nail (17 no.), bib cock tap: supply of white pvc plastic bib cock or water tap of size 1/2 or 15 mm of approved make like prayag for hot and cold water complete sample approved by engineer-in-charge.cat no. 121-o-prayag, angle cock: supply of white pvc plastic angle cock or water tap of size 1/2 or 15 mm of approved make like prayag for hot and cold water complete sample approved by engineer-in-charge. cat no. 144 prayag, piller cock: supply of white pvc plastic piller cock or water tap of size 1/2 or 15 mm of approved make like prayag for hot and cold water complete sample approved by engineer-in-charge. make prayag cat no. 130-o, pvc connection pipe: supply of p.v.c. connection pipe with ptmt nuts collar and bush of approved quality and colour 15 mm nominal bore of length 1.5 feet complete sample approved by engineer-in-charge. make prayag, pvc connection pipe: supply of p.v.c. connection pipe with ptmt nuts collar and bush of approved quality and colour 15 mm nominal bore of length 2.00 feet. complete sample approved by engineer-in-charge. make prayag, pvc waste coupling: supply of pvc waste coupling for wash basin and sink, of approved quality and colour of size 0.25 complete sample approved by engineer-in-charge. cat no. 102 prayag, float ball valve: supply of pvc float ball valve of approved quality, high or low pressure, with plastic floats complete float valve of size 1 complete sample approved by engineer-in-charge. make prayag, float ball valve: supply of pvc float ball valve of approved quality, high or low pressure, with plastic floats complete float valve of size 1/2 complete sample approved by engineer-in-charge. make prayag, float ball valve: supply of pvc float ball valve of approved quality, high or low pressure, with plastic floats complete float valve of size 3/4 complete sample approved by engineer-in-charge. make prayag, supply of synthetic enamel paint of approved make like asian/ dulux/nerolac of required white, green, yellow, black & blue colour complete sample approved by engineer-in-charge., cp brass grating: supply of c.p. brass grating of approved quality and make of size 100 mm dia. complete sample approved by engineer-in-charge. make citizen, cpvc pipe: supply of chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot and cold water supply complete sample approved by engineer-in-charge. size 1make supreme/kisan, cpvc pipe: supply of chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot and cold water supply complete sample approved by engineer-

State Government

CTN :39061175

30 Jan, 2025 3.48 Lacs

Baramulla - Jammu And Kashmir

Tender For elementary major repair at gms shudwani. - demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge: in cement mortar, demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge: in cement mortar., earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: all kinds of soil :, providing and laying of stone soling (hand packed) including ramming, dressing and watering all complete.(incl. all sorts of cost & carriage)., providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. all works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete as per direction of engineer incharge at site., random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: cement mortar 1:6 (1 cement : 6 coarse sand) (quarry), providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete, brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : cement mortar 1:6 ( 1 cement : 6 coarse sand), labour for form work to retain the celing and truss as per direction of engineer incharge at site complete job, labour for dismantling wood work in frames, trusses, purlins and rafters etc as per direction of engineer incharge at site complete job, providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of engineer-in-charge. 35mm first class kail wood complete job, providing corrugated g. s. sheet roofing including vertical/curved surface fixed with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2, painting with synthetic enamel paint of two or more coats on new work approved brand and manufacture on wet or patchy portion of plastered surfaces: as per direction of engineer incharge at site., providing and fixing 1st quality ceramic glazed floor tiles conforming to is : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge in skirting, rise

Central Government/Public Sector

CTN :39051325

13 Feb, 2025 NA

Bangalore - Karnataka

Tender For supply, installation, testing and commissioning of laboratory furniture, modular furniture and unified av solution for mbu, iisc bangalore - c-frame modular furnitureproviding and supply of c-frames manufactured from standard hollow metal sections; confirming to i.s. code 7138:1973 (indian standard specification for steel tubes for furniture) and all sheet metal components to be of crca confirming to is code 513:1994. the suspended under-bench fully welded units shall be supported on heavy-duty steel frames fully carrying the load of worktops.. its superior strength is combined with aesthetically appealing end caps shall give maximum flexibility and modularity while making a layout. c-frame shall be constructed from a rectangular pipe with a cross section of 60mm x 30mm and shall be 2 mm thick and shall be without a vertical front leg to give a clean look. the c-frame legs shall be supplied with adjustable feet (tolerance from -5mm to +20mm) to correct the unevenness of flooring. the tubular enclosed type construction shall discourage dust accumulation and unwanted development of bacteria & fungus. drainage gradient shall be well adjusted throughout the length of table and shall have horizontal supports for drainage systems. the structure shall have a removable back panel to provide access for maintenance throughout the length of table. the c-frame shall also have skirting at back bottom side. the c-frame shall be suitable for sitting and standing nominal heights of 750mm & 900mm respectively. the nominal table depths shall be 620 mm, 770 mm and 920 mm for wall side and 1540mm, 1840mm for island tables. the corner units shall fit well with 770mm & 920mm table depths. all frame-work is to be pre-treated with superior pure epoxy powder coated finish. all metal panel shall go through 9 tanks pretreatment process including 3 stages iron phosphating process. (process names: 1. hot water rinse -> 2. knock off degreasing -> 3. degreasing i -> 4. degreasing ii -> 5. water rinse i -> 6. water rinse ii -> 7. iron phosphating -> 8. water rinse iii -> 9. passivation), common 750 ht.c-frame assy. for table depths 770 wall side without upright , 1540 island without upright & 920 wall side with upright, l.h. 750 ht.c-frame assy. for table depths 770 wall side without upright , 1540 island without upright & 920 wall side with upright, r.h. 750 ht.c-frame assy. for table depths 770 wall side without upright , 1540 island without upright & 920 wall side with upright, common 900 ht.c-frame assy. for table depths 770 wall side without upright , 1540 island without upright & 920 wall side with upright, l.h. 900 ht.c-frame assy. for table depths 770 wall side without upright , 1540 island without upright & 920 wall side with upright, r.h. 900 ht.c-frame assy. for table depths 770 wall side without upright , 1540 island without upright & 920 wall side with upright, providing and supply of welded cabinets under bench floor mounted cabinets shall be flush face construction with doors and drawers in the same plane as the cabinet face frame, without overlap. the moc: ms crca: is 513 (1994). thickness: lh/rh side panels, shutter front, bottom panel, top front, drawer separator, shelf, alignment channel shall be of 1.2mm thk. removable back panel, shutter cover, fr. rack strip, top cover panel shall be of 0.8mmthk.finish: powder coating pure epoxy, thickness 40-50 micronshandle: anodized aluminium finish handles (d-type or recess-type) lock: units have a locking facility with 180 deg. and 10 lever cam lock mechanism (except for sink and corner unit). hinge: ss 304 knuckle barrel hinge of thickness 2.5mm and opening angle 180 deg. screw: ss 304. ball slide: high quality double extension drawers of 500mm length (approved make) (required only for drawer unit) shutter is of twin type construction with sound dampening effect using profeel. shutter cover is equipping with bump on for sound dampening. depth of the cabinets: 53