Latest coating Tenders | Government coating Tenders

corporations/Associations/Others

CTN :39432315

03 Mar, 2025 NA

Kutch - Gujarat

Tender For supply of enamel, synthetic, exterior (a) under coating (b) finishing paint (v3) confirming to is 2932 (q3)

Central Government/Public Sector

CTN :39418583

20 Mar, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of hex head screw m16x120 high tensile as per is:1364 (part-2)-2002, ce-with prope rty class-10.9 to is-1367(part-3)-2002, coating as per mdts-057. and the item should be proc ured from tvs, tuff, dfl, unbrako and rdso approved sources of axle end high tensile cap screws. [ warranty period: 30 months after the date of delivery ]

CTN :39154282

03 Mar, 2025 NA

Khandwa - Madhya Pradesh

Tender For corrigendum : supply and installation of biotechnology instruments - bod incubator with stabilizer:- features available in bod incubator - toughened glass window ,air circulation fan ,removable tray ,temperature,sensor ,door hinges ,pid temperature controller. 2 optional features available in bodincubator stainless steel perforated trays no of trays 3 air circulation motorized blowerexterior body material mild steel and painted in epoxy powder coating insulation material glass woolouter door material mild steel inner door material material of removable traytoughed glass material of removable tray stainless steel wire mesh tray chamber capacity(in ltr) 250-299 thickness of sheet (in mm ) 0.7 thickness of toughed glass/acrylic sheet (in mm ) 7 diameter of stainless steel wire in mesh ( in mm )3 temperature range 10 c to 70 c temperature accuracy 0.5 ctemperature uniformity 1 c., cooling centrifuge 20000 rpm with rotator head and stablizer :- type of motor brushless(without carbons)type of lid lock both manual and electronicno of acceleration and deceleration profiles in built for rotor speed while automatic brakingoption to accelerate and decelerate speed at various rates configuration of rotor supplied with centrifuge machine angle rotorsize of rotor supplied with centrifuge in ml"12x15ml(for angle rotor) rpm 13000"warranty period for equipment & roto condensed water drainage system,the equipment shall be installed and demonstrated before acceptance, servo controller voltage stabilizer supplied with item, deep freezer with stabilizer :- type vertical features puf insulation,frost free capacity ( l) >=250l temperature range in c -10 c to -40 c or better temperature uniformity in degree celsius +/- 3 c or lesstemperature stability of system in degree celsius +/- 3 c, rotatary shekar incubator with stabilizer :- castor wheels ,range of temperature5 degree centigrade to 60 degree centigradetype of display lcd, type of speed controlstepless continuously variable,orbital shaking amplitude in mm25 mm,type of flask which can be accommodated 100 ml ,250 ml ,500 ml ,1000 ml ,2000 ml, interior illumination led bulbs,construction of body double walled with inner and outer walls,door insulated double walled door with glass window,internal length of equipment in mm 765internal width of equipment in mm 660internal height of equipment in mm 650outer length of equipment in mm 1150ouiter width of equipment in mm 800outer height of equipment in mm 1300,range of temperature 5 degree centigrade to 60 degree centigradetemperature accuracy plus minus 0.5 degree centigradetemperature controller microprocessor based digital temperature controller and indicatortype of sensor pt -100,ype of motor brushless motorshaking mechanism controller microprocessor controllerorbital shaking speed in rpm upto 250type of speed control stepless continuously variableincrement of step variation 10orbital shaking amplitude in mm 25 mmtimer adjustment in hours 99, autoclave vertical :- chamber capacity/size approx. 80-120 litersoperating pressure 15 - 20 psipressure gauge type analog pressure gauge (0 - 400) psi temperature accuracy +/- 0.5 c (at 121 c)operating temperature (max) 123 c features automatic start/stop timer,low water level heater cut-o and alarms,over pressure cut-o with audio-visual alarm,low heat warning,inner temperatureindicator,over temperature cut-o with audio-visual alarm,door cannot unlock until chamber pressure reaches room pressure,temperature calibrationfunction spares & accessories perforated corrosion free basket made up of ss 304 (3-4 nos) that arestackable two high or more levelsadditional requirement calibration certicate from iso17025 accredited lab for temperature,pressuregauges & timer, heating element multicombine:- power source electric material ceramicapplication heating shape rectangulardimension diameter 200 millimeterwidth 200 millimeter thickness 8 millimeterlength 600 millimeter specications resistance 5 operating power

Central Government/Public Sector

CTN :39412649

20 Feb, 2025 NA

Nagpur - Maharashtra

Tender For extension of last date for submission - application of heat reflective coating at bank??s additional office building, nagpur

Central Government/Public Sector

CTN :39427376

20 Feb, 2025 NA

Mumbai - Maharashtra

Tender For extension of last date of submission - general repair and application of waterproof coating on terraces of buildings at rbi senior officers?? quarters at jalada & varada, prabhadevi, mumbai

CTN :39432885

14 Mar, 2025 NA

Mumbai - Maharashtra

Tender For supply of enamel, synthetic, exterior (a) under coating (b) finishing paint (v3) confirming to is 2932 (q3) , gum spirit of turpentine oil as per is 533 (q3) , plywood bwr grade 18 or 19 mm of size 8 feet x 4 feet , plywood bwr grade of size 7 inch or 6 feet x 3 feet x 12mm , plywood bwr grade 12mm of size 8 feet x 4 feet , plywood bwr grade of size 8 feet x 4 feet x 6mm , plywood bwr grade 4mm of size 8 feet x 4 feet

CTN :39419740

13 Mar, 2025 NA

Raigad - Maharashtra

Tender For supply of kli-nit contact cleaner spray , ultrasound gel , molykote d- 321r antifriction coating spray

CTN :39430417

14 Mar, 2025 NA

Pune - Maharashtra

Tender For tender for supply of ercp guide wire jagwire point 025 inch x 450 cm , ercp guide wire jagwire point 035 inch x 450 cm , visiglide guide wire 0 point 025 in dia 450cm with 7 cm hydrophillic straight tip and fluorine coating , visiglide guide wire 0 point 035 in dia 450cm with 7 cm hydrophillic straight tip and fluorine coating , billiary pigtail stent 10fr x 7cm , billiary double pigtail stent 10fr x 7cm , ercp sphincterotome tritome dome tip 20mm cutting wire sphincterotome , ercp sphincterotome ultratomexl triple lumen wire guided sphincterotomes short nose 20mm , billiary self expanding metalic stents size 10mm x 8cm uncovered with outer delivery cathetre 7 fr , endoscopic billiary stone removal balloon multiple sizes , eus fine needle biopsy device size 22g , colonoscopy shorts for colonoscopy procedure , controlled radial expansion wire guided esophageal pyloric dilatation balloon size 8 coma 10 , endoscopic variceal ligation band seven shooter , endoscopic sclerotherapy injector size 23 g needle length 4mm channel working length 160cm , cystotome for pseudocyst drainage 10 fr , ercp guide wire metro tracer wire

Central Government/Public Sector

CTN :39424706

15 Mar, 2025 34.21 Lacs

Pune - Maharashtra

Tender For pron of furniture for deficient international sailors trainee accn with galley and dining hall at ins shivaji lonavla - almirah med steel with shelves :- overall size shall be all as shown on drawing. it shall be made of 20 gauge thick mild steel sheet. the almirah shall have three shelves. the almirah shall have one normal handle 120 mm long having three way locking system with proper workmanship. all joints and welding, fixing shall be done according standard workmanship.make of lock :- link/godrej/harrison.finish & paint :- all steel surfaces exposed to view when placed in position shall be powder coated (colour as approved by ge) in seven stages tank process. the test certificate for powder coating is to be submitted through nabl accredited lab., bath stool pvc : -overall size shall be all as shown on drg. make- amko or equivalent, bed hard steel :- overall size shall be all as shown on drg. all steel shall be rectangular ms pipe of 18 gauge thick. the head board shall be 800 mm high and foot board shall be 500 mm high. the head and foot board shall be provided with 18 mm thick isi mark 303 grade plywood shall be laminated with 0.7 mm sunmica sheet (colour and shade as approved by ge). 2 mm thick pvc half round edge beading without joints shall be provided all around . the top of bed hard shall be 12 mm thick bwr plywood isi mark 303 grade provided as shown on drg. all joints and welding, fixing shall be done according standard workmanship. make of plywood : archidply/century/green plyfinish & paint :- all steel surfaces exposed to view when placed in position shall be powder coated (colour as approved by ge) in seven stages tank process. the test certificate for powder coating is to be submitted through nabl accredited lab., board notice :-overall size shall be all as shown on drg. all wood shall be first class teak wood.19 mm thick soft board shall be fixed in side of frame over which best quality green blaze cloth as approved by ge shall be fixed as shown on drg.aluminium flat of 63mmx3.25mm shall be provided all around at back of board.on front side 22mmx10mm aluminium channel shall be provided in side of particle board frame to house 4mm thick glass shutter.polish & finish:-all wood surface shall be melamine polished with high glossy finish. rest all as per drgs and as directed by engr-in-charge., chair dining cushioned :-overall size shall be all as shown on drg.all wood shall be first class teak wood.the size of the legs shall be 40x50mm .front and side rails shall be of size 25x65mm.stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg.75x75x25 teak wood stopper shall be fixed with main frame and legs four nos each in every corner for the support of the cushion and seat ply.75mm thick 40 density cushion of foam covered with approved tapestry cloth shall be fixed over 12mm thick ply as specified in drg.side frame of back of the chair shall be of section 40x50mm..four teak wood vertical stiffeners of section 20x30mm shall be fixed in back of chair. 25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs.make of cushion:- sleepwell/kurlon/godrej interio polish & finish:-all wood surface shall be melamine polished with high glossy finish. rest all as per drgs and as directed by engr-in-charge., chair easy :- overall size shall be all as shown on drg.all wood shall be first class teak wood. the cane shall be 2 mm wide 0.4 mm thick half round and woven in godrej pattern. hard rubber/pvc shoe shall be fixed to the bottom of all legs as per drg.polish & finish:-all wood surface shall be melamine polished with high glossy finish. rest all as per drgs and as directed by engr-in-charge., chair writing :-the frame of the chair shall be of ms tubular frame powder coated ,cantilever type of size 25mmx10mm in section. back form shall be designed with contoured lumber support for extra comfort.12mm thick hot pressed plywood upholstered with superior quality fabric as

CTN :39073792

22 Feb, 2025 NA

Bathinda - Punjab

Tender For bid to ras supply of enamel, synthetic, exterior (a) under coating (b) finishing paint (v3) confirming to is 2932,enamel, synthetic, exterior (a) under coating (b) finishing paint (v3) confirming to is 2932,enamel, synthetic, exterior (a) under coating (b) finishing paint (v3) confirming to is 2932,enamel, synthetic, exterior (a) under coating (b) finishing paint (v3) confirming to is 2932,enamel, synthetic, exterior (a) under coating (b) finishing paint (v3) confirming to is 2932,enamel, synthetic, exterior (a) under coating (b) finishing paint (v3) confirming to is 2932,enamel, synthetic, exterior (a) under coating (b) finishing paint (v3) confirming to is 2932,enamel, synthetic, exterior (a) under coating (b) finishing paint (v3) confirming to is 2932

Coating Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector