Latest coats Tenders | Government coats Tenders

CTN :39650930

19 Mar, 2025 3.06 Crore

Lathi - Telangana

Tender For procurement of uniforms, rain coats, shoes, helmets, polycorbone lathi, whistle with lanyard, etc., for the staff working in the o/o commissioner, hydraa.

Central Government/Public Sector

CTN :39622467

29 Mar, 2025 NA

Budaun - Uttar Pradesh

Tender For supply of removing dry or oil bound distemper water proofing cement paint and the like scrapping and papering and preparing the surface smooth including necessary repairs to scratches etc. complete work , providing and applying white cement based putty of average thickness 1mm of approved brand manufacturer over the plastered wall surface to prepare the surface even and smooth complete , distempering with bound washable distemper of approved brand and manufacturer to give an even shade , new work two or more coats over and including water thinnable priming coat with cement primer , painting with synthetic enamel paint approved brand and manufacturer of required colour to give an even shade one or more coats on old work

CTN :39645099

13 Mar, 2025 7.75 Lacs

Coimbatore - Tamil Nadu

Tender For 15 sfc 2022-23 million plus cities challange aglomaration cities thenkarai tp, coimbatore - displacement (cc) / engine capacity - 700 cc -1250 cc, max power - 20- 30bhp @ 2500 rpm and above, max torque - 500nm @ 2000 rpm and above, type of fuel - diesel, load capacity - 2 cu.rn, vehicle emission norms - bs -vi, no of cylinder in engine - 2 4 cylinder, length of chassis - 3800 mm - 3950 mm, width of chassis - 1500 mm 1550 mm.ground clearance. 150 mm -165mm, fuel tank capacity - diesel-30 ltrs to 40 ltrs cng- 12-25kg, size of tyre s & no s - 145 r 1 2 5 n os., wheel base - 1900 mm 2250 mm, gross vehicle weight - 1550 kg 1900 kg, clutch - single plate dry friction diaphragm, transmission system - manual, no of speed/ forward gears - 4 nos speeds(4f+ 1r), type of steering - manual / power, speed governors - shall be fitted, pay load - 800 kg to 1000kg, tipper body length - 2100 mm-2200mm, mlild steel, tipper body width - 1400 mm - l500mm, mild steel, tipper body height - 750mm- 950 mm, mild steel, side portion (lh & rh)& rear doors sheet thickness - 2 mm, mild steel, tipper body top sheet including frame sheet thickness - 1.6mm, mild steel, tipper body top lid sheet thickness - 1.2mm, mild steel, tipper container - tipper container should be fabricated with two doors on the rear side and four doors on four top corners of the containers with hinges and locking system. a partition shouid be provided on the middie of container along the vertical length of the body, tipper body top lid main sheet thickness - 75 x 40 x 6 mm, hydraulic cylinder make - reputed make, hydraulic system driven - main engine, pump make - as per is standard, pai nting - should be painted with one coat of anti-corrosive epoxy primer and two coats of enamel paint for approved quality to ensure long lasting resistance for weatherizing and breakage. the color shade should be as per norms, lettering - to be carried out as directed by dept of cers, tipper body rear door - shall be with necessary locking facility, side safety guard - shall be provided as per rto requirement, additional conditions - vehicle with fuel sensor and gps tracking, warranty distance/year - 25000km//12 months whichever is earlie. one number of light commercial vehicle

Central Government/Public Sector

CTN :39645418

22 Mar, 2025 15.50 Lacs

Chennai - Tamil Nadu

Tender For repair, recanning and restoration of all wooden and steel chairs at md accn and units of bmu, dhq-5 and icgas chennai area under ge (i) (cg) chennai - chair verandah:-, fd-256 ,259,fd/map-ii/06, spot gas welding to broken parts/joints of chairs., removing of existing torn out/unserviceable plastic cane from chair verandah and recanning the chair fully both seat and back with new plastic cane of virgin quality white, half round of size 4mm wide and 0.60 mm thick.complete all as specified and shown on drawing.the canning shall only be done after painting the chair. , removing the old broken shoes of chairs and supply and fixing best quality new pvc shoes to the legs of chair., removing the existing unserviceable/broken pvc seat and back from the chair,supply and fixing new pvc seat and back 4mm thick to the chair verandah map after providing one flat iron of size 20mmx5mm in support of pvc seat at centre between two sides through proper welding .the pvc seat shall got approved from ge before supply.the pvc seat shall be fied only after painting the chair., painting the frame of the chairs by two coats of synthetic enamel white of approved quality paint after prepartion of steel surface by sanding with sand emery paper and dusting the surface with clean cloth.the chair frame shall be made smooth by applying metal putty whereever required., chair cb steel with arms:fd-75(m), scratching the entire frame of chair and applying one coat of synthetic enamel paint after preparation of surfaces by removing the old paint with sand emery paper. complete all as specified and as directed by engr-in-charge, remvoing the old unserviceable and broken ms flat and supply and fixing ms flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat., removing the old unserviceable seat from the frame of the chair. supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable back from the frame of the chair. supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable arm and supply and fixing new arm of 1st class teak wood as per drg., removing the old unserviceable hard rubber shoes and supply and fixing new hard rubber shoes as per drg., removing the old unserviceable rubber caps and supply and fixing new rubber caps as per drg., chair cb steel without arms: fd-75(m), scratching the entire frame of chair and applying one coat of synthetic enamel paint after preparation of surfaces. complete all as specified and as directed by engr-in-charge, removing the old unserviceable and broken ms flat and supply and fixing ms flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat., removing the old unserviceable seat from the frame of the chair. supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable back from the frame of the chair. supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable hard rubber shoes and supply and fixing new hard rubber shoes as per drg., removing the old unserviceable rubber caps and supply and fixing new rubber caps as per drg., chair easy,fd-229,358 :-, removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood as per drg., removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood as per drg., removing the old unserviceable rail and supply and fix

Central Government/Public Sector

CTN :39647404

24 Mar, 2025 NA

Pune - Maharashtra

Tender For wl board 77 nos. + cee/fa ( in hindi) board 104 nos. total 181 nos. (hindi + english)ret roreflective w/l boards fabrication and supply of engineering whistle indicator in hindi ay/ubl (chee/ pha)-01 and english (w/l)-01 (bi lingual) as per railway drawing of irpwm para of 600 x 600mm square made up of retro reflective sheeting of high intensity prismatic confirming to astm 4956 specification on 2 mm thick aluminum alloy sheet 14 gauge confirming to is 736 in size and shape along with back support of 25mm x 25mm x 3mm angle and angle post of 65 x 65 x 6mm of 3500mm iron including cutting. rivetin g, fabrication etc. and painting the board and back angle frame with two coats of primer and one coat of en amel paint with lead lift transportation etc [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :39112820

20 Mar, 2025 NA

Damanjodi - Odisha

Tender For corrigendum : supply of 415v, utilization category ac23a, 630a local isolator cabinet in sheet steel enclosure complete with 630a, 3 pole load break switch. 2. shall be with side operated handle, padlocking facility, prebreak micro switch having 1no+1nc contact. 3. micro switch contacts shall be wired to 4 sq mm tb for external termination. 4. provision of padlock system having sufficient space to lock the isolator at off position by minimum two agencies at a time. 5. complete with both power & control circuit wiring with all insulators, bus bars and control terminal blocks. 6. detachable bottom gland plate for entry of cables from bottom. 7. front door shall be hinged and inter-locked with the isolator in 'on' position. the front door should have a minimum 3 mm thickness perspex/triplex window for observation of position of contacts. 8. isolator should confirm to iec 60364 standard. 9. the dimensional drawing of the local isolator cabinet or product catalogue showing mounting arrangement of the components should be enclosed along with the offer. 10. isolator cabinet should be provided with rain canopy. 11. any isolator parts should not be made of aluminium/aluminium alloy. 12. isolator cabinet shall be metal enclosed suitable for wall fixing using 4 welded fixations, dust and vermin proof and shall be provided with degree of protection as ip-55. 13. provision for three distinct parallel busbar per phase for termination of three nos of 240 sqmm aluminum cables for incoming and two distinct busbar per phase for termination of 120 sqmm copper cable. 14. all hardware used in isolator cabinet shall be corrosion resistant. 15. minimum clearance between the live parts and detachable bottom cable gland plate shall be 400mm. 16. cabinet should be painted with alkaline resistant epoxy paint. 17. isolator cabinet shall have provision for earthing at two separate and distinct points. 18. each isolator cabinet should be supplied with panel keys., push button station specification: 1. pbs made of 2mm sheet steel enclosure with rain canopy, protection: ip-65. 2. 01 no. of green colour start pb with 1no+1nc contacts, 01 no. of red colour stop pb with 1no+1nc contacts, 01 no.of increase pb with 1no+1nc contacts <(>&<)> 01 no.of decrease pb with 1no+1nc contacts. one emergency stop push button with 1no+1nc contacts (push to lock type) shall be provided. size of each push button is of 22.5mm diameter. inscription plate for all push buttons. 3. pb shall be wired with 2.5 sq.mm. copper wire to 40 nos. serially numbered terminal blocks (tb) of elmex make having tb-5-6, 7-8, 11-12, 13-14 <(>&<)> 17-18 shorting link. 4. two nos. of cut out of size 72x72 mm for ammeter and rpm meter shall be provided. 5. 'on','off' <(>&<)> 'trip' indication led lamps in red, green <(>&<)> amber colour respectively with inscription plate to be provided. 6. all push buttons, elements, led lamps <(>&<)> cutout for ammeter <(>&<)> rpm meter shall be on the hinged door of the pb station. 7. pb station shall be weather proof, neoprene rubber gasket suitable for outdoor application. 8. 2nos. of earthing studs to be provided. 9. left side hinged door shall be provided with flexible braided copper earthing. 10. pbs shall have 04 nos. of corrosion free bracket suitable to fix on vertical surface. 11. detachable gland plate to be provided. 12. the push button shall be painted with one coat of red oxide primer <(>&<)> two coats of zinc chromate primer and finally finished with stoving enamel grey paint. 13. the push button station shall be generally in line of enclosed drawing (fig-2). 14. party to submit the drawing along with the offer for technical scrutiny.

corporations/Associations/Others

CTN :39598126

16 Apr, 2025 27.12 Lacs

Ajmer - Rajasthan

Tender For supply of rain coats

State Government

CTN :39605001

21 Mar, 2025 3.00 Crore

Vadodara - Gujarat

Tender For supplyingandstackingvarioustypeofbuilding, road& other construction materials, at various places of taluka waghodiaunder taluka panchayat, waghodiaunder mgnrega (annual unit rate) - cement (isi 53 grade opc), whitecement, coarsesand, fine sand, brickaggregate 40mm size, brickbats20mm, commonburntclay bricks conventional size, flyashbrick, handbrokenstoneaggregate40mmsize to 63mm size., crushedstoneaggregateforhardquality10 to 20mm size, crushedstoneaggregateforhardquality 40mm size, crushedstoneaggregateforhardquality 40mm to 63mm size, crushedstoneaggregateforhardquality6to 10mm size, quarryspall, murrum/bindingmaterial, rubble, rubble(heavy)at not less than40kg., t.m.t.barsfe- 415, tmt bar - fe 500 d, mildsteel bars, white bela stone (size to be measured), stone dust, vitryfied granite tiles 8 mm to 10 m thick 24 x 24 size dark shade, ceramic tiles, hard murrum, polished kota stone slab green. 25 mm thick, oil bound distemper (two coats) including primer, water proofing cement paint, white lime ( white washing), dry distemper, birla or asian acrylic lapy (putty), weather proof acrylic exterior emulsion paint, binding wire of 18 gauge thick annealed iron, paver block m200 grade 60mm thick, white vitriousching w.c. sqatting pan (india type), urinal ladies squatting pan, urinal squatting type, flat back wash basin colour glazed 550 x 400 size, p.v.c. pipes 6 kgf / sq.cm. 110 mm dia., p.v.c. pipes 6 kgf / sq.cm. 50mm dia., p.v.c. pipes 6 kgf / sq.cm. 75mm dia., u pvc sch40 for cold water 25 mm dia (1)", u pvc sch40 for cold water 32 mm dia (1 1/4)", u pvc sch40 for cold water 40 mm dia (1 1/2)", u pvc sch40 for cold water 50 mm dia (2)", stone slab 100mm thickness, gun metal wheel valve (i) 15 mm diameter., gun metal wheel valve (i) 20 mm diameter., gun metal wheel valve (i) 35 mm diameter., gully trap 100mm x 100 mm size.

CTN :39606680

28 Mar, 2025 NA

Hooghly - West Bengal

Tender For tender for supply of taking down of light fittings of any type size and model complete all as specified and directed. , taking down of brackets of any type size and model complete all as specified and directed. , m& l in repair steel tubular swaged poles complete with cast iron base plate , finial taper plug , bolts , nuts & screws as specified type 410 sp 22 (8.5 metres long) complete all as specified & directed. , m& l in repair steel tubular swaged poles complete with cast iron base plate , finial taper plug , bolts , nuts & screws as specified type 410 sp 31 (9 metres long) complete all as specified & directed. , re fixing of led street light fittings of any wattage outdoor type complete all as specified and directed. , supply and fixing in repair led street light fitting 120 watt 230 v ac outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver , lamp bracket with impact and corrosion resistant including thermal management in multiple optics , efficacy 110/120 lpw , complete with ip 65/66 protection complete all as specified and directed. , supply and fixing in repair led flood light 80 watt 230 v ac outdoor type with thermal management in multiple optics and equipped with ip66 protection , with impact and corrosion resistant complete with driver and lamp , efficacy 110/120 lpw , including clamp , nut , bolts etc.complete all as specified and directed.make. crompton , cat no.lfl 80 cdl/60 hpm , supply and fixing in repair led flood light 150 watt 230 v ac outdoor type with thermal management in multiple optics and equipped with ip66 protection , with impact and corrosion resistant complete with driver and lamp , efficacy 110/120 lpw , including clamp , nut , bolts etc.complete all as specified and directed.make. crompton , cat no.lfln 150 cdl/60 m , s&f cable junction box 155x210x92 mm in size , made out of thermoplastic , having ip 66 protection for outdoor installation fixed with 4 way bakelite cable terminals including 03 nos polymide gland with check nut (m 32 02 no & m 25 01 no) fixed on poles with aluminium clamps of size 25x3mm , nuts , bolts , washers etc. including taking out of old unserviceable cable junction box complete all as specified and as directed. make. cat no. dk 1616g of hensel or equivalent model , supply and passing through steel tubler pole/service connection , 1100 volts grade multicore , fr , round insulated copper conductor and sheathed flexible cable , multistranded , three core of nominal cross sectonal area 1.5 sq mm , for connection of security light from junction box through pole /conduit with all terminals complete all as specified and as directed. , s and f single arm bracket made of40mm dia 1.0mtrs long for security light , with mounting ms clamp of flat iron size 25x5mm of suitable length 02 pairs including nut bolt etc of suitable size and painting to ms clamp with two coats of aluminium paints over a coat of red oxide netal primer all as specified and directed by engr in charge. , s & f in repair rigid non metallic pvc conduit of dia 20 mm exclusive of boxes (junction/terminal) but inclusive of all tees , bends , elbows , reducers , bell mouth tube ends and fixing accessories such as couplers , lock nuts , saddles , pipe hooks , clamps etc. all as specified and directed by engr in charge. , m and l for earthing complete with ms galvanised plate of size 60cmx60cmx6mm as earth electrode buried directly in ground earth pit not less tan 2.25mtrs deep below ground level with top edge of the plate not less tan 1.5mtrs below normal ground level connected to galvaniosed iron strip 32x6mm as earthing lead by means of bolts nut check nut and washers of galvanised iron welding or steel all as shown in electrical plate no 3 in ssr part i of 2009 connected to earthing test point all as specified complete with exevation and earth work pcc pit with 6mm thick ci ms cover having suitable handle 10mm ms rod with frame and locki

CTN :39334567

13 Mar, 2025 7.00 Lacs

Hyderabad - Telangana

Tender For corrigendum : procurement of ptg items for ptg ballot for mlc teachers elections - , p. s positive plates for web r.o-62 machine (technova) size:467mmx620mmx0.3mm, p. s positive plates for eagle 30 machine (technova) size:560mmx770mmx0.3mm, rubber blankets without patties (cow brand) for web r.o-62 m/c size:497mmx633mmx4ply, offset book black ink for web r.o 62 m/c (coats brand) , p.s positive developer (technova), roller wash (technova), scum remover (technova), gum solution (technova), mobil oil 20w/40 (castrol), plate cleaner-gp (technova), cello tapes , pvc gum tapes 3, benzyne (1 ltr. x 50), rin soaps (small), viscovita sponges, astrolon sheets (thin), image remover (+ve) (100 ml), cotton wool (400 gms.), plate suckers/rubber suckers (as per sample), chalk powder for cutting m/c, plate rivets for web r.o-62 m/c (as per sample), plate patties for web r.o60 m/c (as per sample), blanket patties with screws for web r.o 62 m/c (as per sample), v-belts for web r.o-62 m/c size:2350, novadom fountain solution (no.405), acid font powder (200 gms), cotton waste , p. s positive plates for web r.o-62 machine (technova) size:467mmx620mmx0.3mm, p. s positive plates for eagle 30 machine (technova) size:560mmx770mmx0.3mm, rubber blankets without patties (cow brand) for web r.o-62 m/c size:497mmx633mmx4ply, offset book black ink for web r.o 62 m/c (coats brand) , p.s positive developer (technova), roller wash (technova), scum remover (technova), gum solution (technova), mobil oil 20w/40 (castrol), plate cleaner-gp (technova), cello tapes , pvc gum tapes 3, benzyne (1 ltr. x 50), rin soaps (small), viscovita sponges, astrolon sheets (thin), image remover (+ve) (100 ml), cotton wool (400 gms.), plate suckers/rubber suckers (as per sample), chalk powder for cutting m/c, plate rivets for web r.o-62 m/c (as per sample), plate patties for web r.o60 m/c (as per sample), blanket patties with screws for web r.o 62 m/c (as per sample), v-belts for web r.o-62 m/c size:2350, novadom fountain solution (no.405), acid font powder (200 gms), cotton waste

Coats Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

corporations/Associations/Others

State Government