Latest coin Tenders | Government coin Tenders

State Government

CTN :40100392

05 May, 2025 NA

Bankura - West Bengal

Tender For different item of workunder pwm scheme - agglomerator machine: (24 x30 )specification: applicability: all thin plastics, multi-layer plastics and styrofoamautomation: semi-automaticinner diameter: 24 height: 30 bearing housing type: 2 bearings production capacity: 80-100 kg/hblades & sizes: 8 no. (4 rotter blades & 4 fixed blades)blade material: camani blades rotor shaft:100 mm equi balanced shaftmotor: 30 hp motor & starter body:12 mm ms sheet and 2 mm ss sheetstructure: heavy mild steel frame weight:1100 kg (approx.)overall size: w 78 x l 109 x h 48 inch on site trainning maintenance: one year from the date of installation. [rates are inclusive of supplying, fitting , fixing, installation of machine or any others incidental charges with electrification, transportation, all taxes including labour and materials complete], plastic gatta making machine : hellical gear box 225(omex), motor 30hp motor & 15hp heaters on site trainning maintenance: one year from the date of installation. [rates are inclusive of supplying, fitting , fixing, installation of machine or any others incidental charges with electrification, transportation, all taxes including labour and materials complete], all in one granular machine :granual machine extruder 100 mm with heaters, heating panel motor &starter ss water granual cutter specification: dia of screw & barrel : 100mm (en 41 b and hardness 65 hrc)barrel design : plainscrew design : maddoc barrier (en 41 b barrier type screw size 100mm)ld ratio : 23:1main motor : 20 hp havells/crompton 1440 rpm motor & starter gear box : helical gear box ge 200 (omex)heaters : 15 hp ( 1 hp each) with heating panneloutput : 80-100 kg/hr. approx.(depends on raw material)die type : single manualtank : ss water tank for line of melted plastic granual cutter : 6 inch granual cutter with 2 hp motor control panel : controll panel for push button operationextruder machine size : 13.5 x 5.10 x 5 feet (l x w x h) extruder machine water tank size : 8 x 1.5 x 2.5 feet ( l x w x h)granual cutter size : 2 x 1.5 x 4 feet ( l x w x h) on site trainning maintenance: one year from the date of installation. [rates are inclusive of supplying, fitting , fixing, installation of machine or any others incidental charges with electrification, transportation, all taxes including labour and materials complete], mixer machine : 24" x 30", main motor : 20 hp havells/crompton 1440 rpm motor & starter gear on site trainning maintenance: one year from the date of installation. [rates are inclusive of supplying, fitting , fixing, installation of machine or any others incidental charges with electrification, transportation, all taxes including labour and materials complete], dryer machine machine : 24" x 30", main motor : 20 hp havells/crompton 1440 rpm motor & starter gear on site trainning maintenance: one year from the date of installation. [rates are inclusive of supplying, fitting , fixing, installation of machine or any others incidental charges with electrification, transportation, all taxes including labour and materials complete]

corporations/Associations/Others

CTN :40133274

16 May, 2025 11.39 Lacs

Kolkata - West Bengal

Tender For procurement of spare parts for scan coin packaging line-, . inverter; vector fi, 8200 ; 0.37 kw, , 2. inverter; vector fi ,8200 ; 0.75 kw, , 3. i/o module scan coin, , 4. drive; evf8203-e, , 5. line filter for scan coin, , 6. incline conveyor motor, , 7. upper conveyor motor

CTN :40140950

17 May, 2025 NA

Delhi - Delhi

Tender For supply of scissor barbar , scissor er tool , veg cutter chopper , plastic container air tight 2 kg , steel steeliness plate rack , tea strainer small , steel patila , water bottle for dispenser , case roll , water camper , tong , steel jug , induction fry pan , cell coin cr 2032 , cell torch 1050 r 1 5v , cell lr 41 , cell charger multi cell , search light bty okaya 7 2h , tester , cutting plier , clamp meter , electric iron , screw dvr full set , stabilizer , hdmi cable 1 5 mtr , lock hdmi , maintenance box l3212 , npg 59 tonner for xerox machine cannon 2004 n , npg 59 tonner for xerox machine cannon 2004 n toner powder , xerox machine canon 2004n ruler drum , xerox machine cleaning blade , 12a new cartridge , 88a new cartridge , 80a new cartridge , refill powder for all cartridge bottle model just tec magin 12a , epson printer l3212 ink 003 , epson printer l3212 ink black 003 , 9 amp battery , rj 45 connector bid number/ & ( * ) : gem/2025/b/6158448 dated/ + : 26-04-2025 bid document/ 3 3 1 / 29

CTN :40135199

16 May, 2025 NA

Panchkula - Haryana

Tender For supply of ms cdl item lab reagent - kit for estimation of creatinine , disposable erythrocyte sedimentation rate esr tube , kit for estimation of hdl cholesterol , kit for estimation of alkaline phosphatase , kit for estimation of cholesterol , kit for estimation of bilirubin , kit for estimation of triglyceride , kit for estimation of uric acid , disposable lancet for finger prick coma pkt of 100 , para check oblique malaria rapid test strips pf oblique pv antigen test kit , microtips 100 1000ul pkt of 500 tips , microtips 50 200ul pkt of 1000 tips , microtips 5 ul 50 ul pkt of 1000 tips , rapid card test for pregnancy , ra factor test kit latex agglutination method , kit for estimation of sgot , typhi dot rapid kit of 25 test , kit for estimation of urea , widal test kit , c reactive protein test kit , kit for estimation of glucose , rapid test kit for dengue ns1ag plus igm plus igg antibody combo card

CTN :40137147

09 May, 2025 NA

Damanjodi - Odisha

Tender For supply of is 2062 gr.e250 gr. a or b ismc 75 standard length as per soqr item no. 1 , is2062 gr.e250 gr. a or b ismc 100 standard length as per soqr item no. 2 , is 2062 gr.e250 gr. a or b ismc 125 standard length as per soqr item no. 3 , is 2062 gr.e250 gr. a or b ismc 150 standard length as per soqr item no. 4 , is 2062 gr.e250 gr. a or b isa 75 x 75 x 6 standard length as per soqr item no. 5 , is 2062 gr.e250 gr. a or b isa 90 x 90 x 6 standard length as per soqr item no. 6 , is 2062 gr.e250 gr. a or b isa 90 x 90 x 8 standard length as per soqr item no. 7 , is 2062 gr.e250 ms plate 12mm thick as per soqr item no. 8 , is 2062 gr.e250 ismc 150 x 75 x 5.7 as per soqr item no. 9 , is 2062 gr.e250 isa 50 x 50 x 6 as per soqr item no. 10

Co-operative

CTN :40120374

12 May, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For c s item on conversion supply basis and forged steel item - c.s coupling having material as per is:1030 grade 280-520w for mill size 30"x60" as per drg. supply basis, conversion basis, machining charge, cast steel crown pinion having material is:2708 grade-iii-b for mill size 30"x 60" as per drg.supply basis, conversion basis, machining charge, c.s.trash plate having material as per is:1030 and grade-iii-b supply basis, conversion basis, machining charge, teeth cutting/grooving of trash plate as per drg., c.s.trash beam as per is-1030/is 2708 as per drg.supply basis, conversion basis, machining charge, forge steel tail bar for taxmaco and kcp mill having material c-40/8 as per drg. mh- 6 & mh-56supply basis, conversion basis, forge steel pinion for transmission gear of taxmaco mill as per drg. no. mh 39,material en-24,tensile strength70-80 kg./sqcm, hardness 200-220 bhn, c.s.bearing housing for taxmaco mill as per deg no mh-17-c/04 side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-17-b side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-17-b top roller housingsupply basis, conversion basis, c.s.gear coupling for c/f machine as per drg.no.bh-14 (duly case hardness), c.s. pinion for cane unloader as per drg, cu- 16teeth-17, teeth -18, c.s.sprocket 2" pitch (both pilot bore)(i) no of teeth 18 , boss dia 3", (ii) no of teeth 36 , boss dia 6", c.s.sprocket for boiler rotary feeder as per drg.blr-73/1 pitch- 25.0 mm,no of teeth 21, od -180mm. p.b -25 mm, c.s.sprocket for bagasse elevator (pilot bore) as per drg.mh-75 pitch 50.8 mm,no of teeth 50, od 842.70mm. pcd 808.7mm,teeth thickness 28mm , boss- 270x130 mm, cs sprocket (pilot bore ) as per drg.blr-62 pitch 50.8 mm, no.of teeth-14 pcd 226.49mm,od 258.8mm, static coller of 25 mm thick duly hard faced of 5 mm thick layer . total thick 30 mm after hard facing for taxmaco & kcp mill as per drawing no. mm 105(i) m.s. material, (ii) c.s.material, sprocket of inter carrier od 280 mm,no.of teeth 45.pitch 19.5 mm, c.s. sprocket (duplex) for enter carrier teeth 12, as per drg. mh-72/sample, s.s. wear plate is 304 quality (i) length 435 mm x width 370 mm x thick 15 mm, (ii) length 385 mm x width 330 mm x thick 15 mm, c.s.tresh beam bracket as per sample /drg., c.s.eccentric pin trash bar adjusting device as per drg. mh-133/2024-25, c.s. trash beam adjusting connecting rod for taxmaco mill, as per drg. mh- 297, c.s. bridge wheel for cane unloader as per drg. cu25 (1),, trolly wheel for cane unloader as per sample /drg., pinion gear set for cane unloader as per sample /drg, c.s. pinion (gear) for rbc cross carrier pitch 41 mm. teeth 25 , type of teeth in valute (spur) module 12.7 mm width 125 mm .od 343 mm, bore 2" dia as per drg., clutch shaft for mill. as per drg. mh-76 , en-8for taxmaco mill -sl.no.2, for kcp mill - sl.no.1, cs worm for crystilizer wheel od 290 mm, bore 81 mm.pitch 80 mm complete, groving of c.s. trash plate as per drg., idler wheel gear for cane unloader., no of teeth 68, od-420 mm, module-6, pitch- 18.84 mm, pcd-408 mm, as per drg. no. cu-25 (i), pinion for cane unloader no. of teeth- 33, od-212 mm, pcd-198 mm, pitch- 18.84 mm, module-6 as per drg. no., pinion for cane unloader no. of teeth- 18, od-200 mm, pitch- 35 mm, bore- 50 mm, width-115 mm, module-6, teeth depth-25 mm as per drg. no., break stand complete for cane unloader, size-10", cs sprocket of rbc, nos of teeth 12, as per drg. blr 32/93, chain sprocket for inter carrier clucth shaft, od 280, pcd 270, bore 108, root dia 260, nos of teeth 45, nos of hole 4, as per drg. 001, pinion for transmission gear kcp mill, material en-24(as per drawing no. mh-95/2024-25), c.s. helical teeth pinion, teeth-20, od-60, bore-26, pitch-10(as per drawing no. bh-rg-05/2024-25), c.s. helical teeth pinion, teeth-17, od-62, bore-28, pitch-13(as per drawing no. bh-rg-04/2024-25), chief engineer

Central Government/Public Sector

CTN :40118796

08 May, 2025 77.2 Thousand

Madurai - Tamil Nadu

Tender For supply of file with normal cobra clips , put up file tag file , all pins , hb pencils , eraser , pencil sharpener , black ball pen reynolds and goldex etc , red ball pen reynolds goldex etc , blue ball pen reynolds and goldex andetc , paper and craft paper brown sheet , correction pen , coin cell battery , battery cell , notebook or note pads 70 gsm , a4 size paper tnpl, jk copier, etc , page marker flags , envelop , a3 cloth cover , a4 size cloth cover , highlighter marking pen , white board marker , glue stick fevi stick, kores glue stick, etc , tags for files made of tin material , printe plain register , paper liquid gum camlin, classmate, etc , duster cloth , gel pen blue pilot and reynolds , gel pen green pilot, reynolds, etc. , stapler pin small size , stapler pin big size

Central Government/Public Sector

CTN :40123202

19 May, 2025 NA

Dahod - Gujarat

Tender For supply of procurement of the lockout/tagout kit for electrical switchgears and various electrical ite ms as per the e-square?s catalogue s.r. no. es-edls-02, make- e-square or similar. the list of item in a kit as per the attached annexure-a. ]

Central Government/Public Sector

CTN :40098318

07 May, 2025 99.82 Lacs

Dhubri - Assam

Tender For supply of annual operation and maintenance of electrical and mechanical works at rupsi airport - operation and maintenance of electrical and mechanical installations , job contract for operation and day to day maintenance services of airport systems equipments , execution of item of schedule of rates cpwd dsr 2022 as and when required , testing of transformer oil sample including conducting bdv test and submission of test report etc complete as required , filtration of transformer oil of 630 kva transformer , supply of transformer oil conforming to is 335 1983 , servicing and checking of lt air circuit breaker , servicing and checking of ht vacuum circuit breaker , calibration and testing of relays at ht panel , calibration and testing of following relays at lt and synchronizing panel , scrubbing, cleaning the existing surface of cubicle panel, feeder pillars and painting , lettering of maximum 2 inch size alphabetic or numerical , cleaning the surface of ms chequered plates , supply and replacement of silica gel in breather of existing 630 kva transformer etc. complete as required , lifting and lowering of 10 hp borewell submersible motor pump set , servicing and complete overhauling of 10 hp borewell submersible motor pump set , decoration of terminal building and canopy of rupsi airport , supply and replacement of defective smoke detectors , supply and replacement of defective manual call point , maintenance and service of addressable two or one loop honeywell make fire alarm systems , supply of convertor or driver suitable for philips make 20 w downlight types led luminaires or fittings , supply of convertor or driver suitable for osram make 120w types of led luminaires or fittings , supply of convertor or driver suitable for havells make 18 or 20 w downlight of led luminaires or fittings , supply of convertor or driver suitable for wipro make 36w 2ftx2ft recess mounted of led luminaires or fittings , supply of 1000w 240v lamp suitable for aerodrome beacon , supply of aerodrome beacon , calibration of clinometer , supply of minimum 10 meter high wheel driven telescopic ladder , supply of reflector , supply of 2c x 4 sq mm. secondary lead with plug , supply of b connector or four way porcelain terminal , supply of 5 kv grade 50 hz ac isolating transformer , supply of two pin halogen lamp holder suitable for 200 watt , supply of 5 w screw cap led lamp , supply of wind sock cloth , supply and replacement of led flood light , supply and replacement of obstruction light of wind direction indicator , supply and replacement of 180 ah 12 v lead acid battery , supply and replacement of 100 ah 12 v lead acid battery , supply of automaic electric hand drier , servicing, checking repairing overhauling and testing of crompton make 630 kva transformer

Central Government/Public Sector

CTN :40097917

14 May, 2025 NA

Sundergarh - Odisha

Tender For supply of pipe, ms, is: 1239 part-i, 60.8mm, 50mm(item 10 71301000100970) , pipe, ms, is: 1239 part-i, 76.6mm, 65mm(item 20 71301000100954) , pipe, ms, is: 1239 part- i, 25mm(item 30 71301000100974) , pipe, ms, is: 1239 part-i, 20mm(item 40 71301000100960)

Coin Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Co-operative

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector