Latest coir yarn Tenders | Government coir yarn Tenders

CTN :39757716

26 Mar, 2025 3.50 Lacs

Bikaner - Rajasthan

Tender For open gym material with installation-, supply & fixing equipment for open gym as per following details. item should be fix properly including e/w & c.c. in m-20 as per requirement., , sit up & pull board double: product dimensions: 1760mm (length) x 1140mm (width) x 660mm (height)., , safe workout area: -2500mm (length) x 1600mm (width)., , the sit up board double made from "c" class gl pipe. center column made from 100mm nb "c" class g.i. pipe., , the main frame is of 25mm nb made from "c" class gl pipe. frp sheet of 3mm thickness is molded on main frame., , the remaining frame of the sit up board is of 32mm nb made from "c" class gi pipe., , the powder coating is done with pure polyester powder paints with 60 to 70 micron thickness., , the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb "c"class welded with m.s. round plate of 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness., , supply & fixing equiopment for open gym as per following details. item should be fix properly including e/w & cc. in m-20 as per requirement., , *legg press dimensions:-1840mm (length) x 360mm (width) x 1560mm. (height)., , *safe area-2.8 x 1.4mtr., , *leg press equipment made from "c" class g.l. pipe of different nb. nb stands for norminal bore sizes le., , *internal diameter of pipe in millimeters, , *the center pipe is of 100mm nb made from "c" class g1. pipe., , *the sleeve frame is of 100 dd and of m.s. seamless pipe with thickness 5mm. this sleeve can be disassembled from main frame., , *the bottom support of m.s. round plate of 250 mm & 10mm thick., , the remaining outer frame is of 32nb made from "c" class g.1. pipe., , 2, , the foundation used for fixing is structure and made from center pipe of g.i. of 80mm. nb "c" class welded with m.s., , round plate of 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.5. angle of 3 mm thickness and 20mm x 40mm crc. square pipe of 3mm thickness., , *seat & back rest provided are made up of ms deep draw quantity of 2mm thickness with no joint with uniform outer edge radius 20mm., , *the footrests are made from casted aluminum material, having sizes 130mm x 310mm x 5mm thick. with the support, , of 310mm x 130mm x 3mm thick ms plate., , the frame of footrests made up of 25 nb "c" class g.i. pipe. *, , closing caps are made up of high quality fiber reinforced plastic material. *, , *to build structure bushes are used which are made from m.s. seamless pipe of 50mm c.d. and 5mm thickness., , *the pins used are made up of 25 mm sae 8620 bright material., , *the bearings used are of "6205zz" permanent lubricated sealed bearing of reputed brand., , *high tensile steel with galvanized nut bolts are used for assembly., , *the cerclips used for assembly are of a24 mm, , 3, , providing and fixing of cross trainer of size not less than 1320mm (length) x 600mm (width) 1750mm (height), to enhance the mobility of upper and lower limbs and improve the flexibility of joints. the main structure frame shall be made from g.l. pipe minimum of 80nb "c" class welded with m.s. round base plate atleast 250 mm & 10mm thick. the handle frame shall be made up of atleast 25nb "c" class g.i. pipe. the footrests shall be made from aluminum casting material of size not less than 130mm x 310mm x 5mm thickness and mounted on ms. plate of size 130mm x310rnm x 3mm thick. high tensile steel with galvanized nuts and bolts shall be used for assembly. the powder coating shall be done with pure polyester powders paints with 60 to70 micron thickness, complete in all respect includig fixing the m. s holdfast in cement concrete to hold the whole structure., , 1, , 4, , providing and fixing of chest press of size not less than 2000mm (length) 710mm (width) x 2200mm. (height), to enhance the strength of upper limbs and the muscles in chest & back and promote cardio pul

Central Government/Public Sector

CTN :39763577

27 Mar, 2025 NA

Mysore - Karnataka

Tender For supply of densified thermal bonded polyester blocks to rdso specification no. c-k607 (rev. 2 of december-2015 with amendment - 1 of august-2016), size 1780 x 600 x 50 mm to icf drawing no. scn6-6-1-610 alt-u/2 item no.1

Central Government/Public Sector

CTN :39714829

14 Apr, 2025 NA

Mysore - Karnataka

Tender For supply of densified thermal bonded polyester block to rdso specn. no. c-k607 (rev.2 of dec-2015 wit h amendment-1 of august-2016) to size 600x490x55 mm to icf drg. no. scn6-6-1-610 alt.u/2 item no. 4 [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39733154

03 Apr, 2025 NA

Mysore - Karnataka

Tender For supply of densified thermal bonded polyester block to rdso specn. no. c-k607 (rev.2 of dec-2015 with amendment-1 of august-2016) to size 600x490x55 mm to icf drg. no. scn6-6-1-610 alt.u/2 item no. 4

Central Government/Public Sector

CTN :39702749

02 Apr, 2025 NA

Chennai - Tamil Nadu

Tender For supply of densified thermal bonded polyester block cushion for longitudinal lower berth of size 38 x 565 x 850 mm for scn coaches to item no .6 of icf drg no scn6 6-1-610 alt .s/2 specn. material to rdso spec no ck-607 rev.2 of dec 2015. [ warranty period: 30 months after the date of delivery ]

CTN :39605898

27 Mar, 2025 NA

Mysore - Karnataka

Tender For tender for supply of safety material - item description wind socks type n a material double linen cloth size n a protection waterproof colour n a additional information safety item parachute for long lasting that can sustain in all kinds of weather , item description hand glove type low temperature material rubber size n a protection n a colour n a refer attachment for specification , item description hand gloves , 11kv type n a material rubber size n a protection n a colour n a application insulation additional information standard is 4770 working potential 11000 v , testing potential 33000 v , with applicable certificates , quantity mentioned in the tender enquiry is only indicative. actual quantity ordered shall be determined at the time of monthly maintenance and shall be advised by hpcl. , sup 33.0kv rubber hand gloves_ for detailed description , refer schedule of quantities , item description latex gloves _100 pcs per packet_ type powdered and medical examination material n a size n a protection n a colour n a beaded cuffs to ensure easy removing and wearing. pre powdered with bio absorbable corn starch , item description nitrex gloves _100 pcs packet_ type n a material n a size n a protection n a colour n a 100 percent seamless machine knit polyester shell offers flexibility and form_fitting comfort offering unparalleled grip and protection in oily conditions coated gloves cut resistant gloves and cut resistant sleeves , item description hand gloves material asbestos size 14 in leather_crome_ , _k_21 quality_hand gloves with inside leather lining_065_05225 30_ , quality with inside cotton lining.the glove to offer protection aganist abrasion , suts and specific temperature , item description hand gloves type semi_round , thumb lined material canvas leather size 10 in full split leather palm , white elastic wrist , double stitched , item description hand gloves material polyvinyl chloride size 18 in colour yellow with fabric lining , supply cotton hand gloves for maintenance purpose is 8519 1977 , item description goggles , panoramic view type panoramic view protection chemical splash protection acceptable models 1_ ud 39 2_ uee 161 3_ nautilus 2100hc 4_ 3m 1621 5_es 009 for protection against chemical liquids _amp splashes as well as dust with the , item description goggle type protective material n a size n a protection uv protection colour n a light weight , ce marked and protection against dust and flying objects , fumes etc , item description smoked dark goggles , ud 50 type anti fog plain material polycarbonate acceptable models m 1712 , nautilus 1066 , uee 121 , es 001 with the following specifications light weight protective goggles with polycarbonate wrap around frame , with ant , item description goggles , uee 132wg type electric arc welding acceptable models es 004 or with the following specifications goggles for electrical arc welding with soft , heat resistant , pvc or polycarbonate frame offering snug fitting.the lens should be ir , item description goggles type gas cutting specifications snug fit bocal goggles of heat resistant pvc frame with ventilation.it is fitted with spinter proof lens of shade no 7 and with adjustable non slip elastic head band of min.10 mm width.the goggle , item description ear plug type n a material pliable rubber size n a protection n a colour n a manufacture 3m venus karam , meeting attached technical specification , item description ear muff type universal material n a size n a protection n a colour n a additional information sound level 135 dba make 3m or venus h 550 or karam ep 21 meeting attached technical specification , safety shoes confirming to is 15298 _part ii_ 2011 and bearing is mark , sole should be antistatis , oil resistant , water resistant and acid resistant. shoes should be made with polyurethane sole fixed by direct injection process. metal should not be used in shoe construction except for toe cap and eyelets , item description safety helmet material hdpe of

Central Government/Public Sector

CTN :39442526

26 Mar, 2025 NA

Chennai - Tamil Nadu

Tender For supply of densified thermal bonded polyester block cushion for middle ,upper and si de upper berth berth of scn coaches to size 1776x601x38mm to item no 6.of rcf drg no se61365,alt c specn material to rdso spec no ck -607 rev.2 of dec 2015 [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39289333

26 Mar, 2025 NA

Mumbai - Maharashtra

Tender For supply of densified thermal bonded polyester blocks for longitudinal lower berth, as per hq/ccg 's drg.no. -c/sk-474/h alt-2, item no.-6, material conforming to rdso specn.no.-c-k-607(rev.-2) of de c-2015, with amnd.-1 of august-2016, std ir totem, [ warranty period: 30 months after the date o f delivery ]

Coir Yarn Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector