Get complete information related to latest Collision Protector Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Collision Protector Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Collision Protector Tenders.
Tender For capital repair repair and overhauling of various finishing area equipment in mmsm-, repair works/replacement of protective doors., repair work of chain beam., repair works/replacement of cross feed conveyor beam, overhauling jobs/re-visioning foundation repair of fixed rollers., turning device bracket replacement., dismantling of tanks,man hole covers, pipe and flanges required manual cleaning of all sludge from the tank, filters changing gasket and seals changing for 5/2 hydraulics, piling table cylinders and racks re-visioning, retractable stopper complete re-visioning., scale pump house suction strainer cleaning, pipe clamps tightening of all the hydraulic systems and replacement wherever necessary upto 22 mm-1000nos,25 mm to 50 mm-1000 nos, above 50 mm-500 nos., complete hose changing for the mobile saw including repair/replacement of power chain, replacement of o rings on finishing hydraulic station size 200-300., clamping unit support rail alignment and strengthening (all mobile saws), all top clamping beam brackets revisioning and pins changing., re-welding of the pipe line joints in piling area approx.500 nos.of various sizes., all saws lift/lower cylinder., re-visioning, brackets repair replacement., revisioning/replacement of traveling wheels of mobile saws., removal of all the fixed rollers of lhs.saw area foundation repair, tools replacement, rollers replacement, fixing and alignment., overhauling of feeder mechanism., vertical conveyor buffer pads changing in piling/bundling section, vertical conveyor idle sprocket bearing replacement., repair of piling collecting grids., revisioning/overhauling of brakes in finishing area., clamping of all the coolers and tank cleaning of tying machines & hydraulic systems, foundation rectification of ccd., fixing of valves in hydraulic racks,, revisioning of fixed stopper., overhauling of hydraulic racks, ccd-1 & 3 shaft changing., piling platform rectification., saw area traversible stopper overhauling., fixing of hearing block stoppers on ccd beam., revisioning of limiting lever assembly., replacement of turning device magnet, rotory unit shaft changing, ccd-5 fulcrum near rotory unit replacement,
Tender For repair and renovation of paddock by construction of cgi sheet roof shed of 75meter long and 9meter wide in both side with steel truss and rcc foundation and providing and laying of paver block in paddock side area at ccbf, chiplima, sambalpur(odisha)
Tender For construction of two nos. stadium at dr. b.c. roy vidyapith playground within saltora g.p under saltora development block from district mineral foundation fund the f.y 2025-26
Tender For construction of boundary at dr. b.c. vidyapith playground within saltora g.p under saltora development block from district mineral foundation fund the f.y 2025-26
Tender For work includes new toilet near verandah of high school block and ramp.estimate includes dr foundation, rr basement, solid block masonry, rcc roofing, ceramic floor and wall tiles,vitrified tile primer painting fittings rcc septictank waste pit etc
Tender For corrigendum : supply of various plummer blocks for 500 mw coal handling plant at ukai tps.(et-5994 fuel) - plummer block 528 ci ts 4h with lr grease nipple, drain plug, plummer block sna 524 ci ts 4h with lr grease nipple, drain plug, plummer block sna 526 ci ts 4h with lr grease nipple, drain plug, plummer block sna 532 ci ts 4h with lr grease nipple, drain plug, masta make plummer block sd 3136 suitable for brg no. 23136 cck, masta make plummer block sd 3144 suitable for brg no. 23144 cck, plummer block sna 520 ci ts 4h with lr grease nipple, drain plug. four foundation bolts., plummer block housing(sna 518) of return shaft assembly for 45 tph submerged scraper conveyor below bottom ash hopper part no:n2659, appolo make plummer block sbds 3044 suitable for bearing no 23044 cck/w33, appolo make plummer block snh 522/619 (fixed) suitable for bearing no 22222 ek, appolo make plummer block snh 522/619 (free) suitable for bearing no 22222 ek, appolo make plummer block snh 528 suitable for bearing no 22228 cck/w33, appolo make plummer block snh 532 suitable for bearing no 22232cck/w33, appolo make plummer block safs 338 (fixed) with stabilizing ring, triple labyrinth seal and 2 nos. each 1/8 inch bsp grease nipple suitable for sph.roller brg 22338cck/w33/c3, appolo make plummer block safs 338 (free) , triple labyrinth seal and 2 nos. each 1/8 inch bsp grease nipple suitable for sph.roller brg 22338cck/w33/c3, plummer block no snh 520 ts (one end closed , four foundation bolts, plummer block no snh 522 ts (both end open , four foundation bolts, plummer block no snh 522 ts (one end closed, four foundation bolts, pillow block housing no sd 3136 ats (fixed) suitable for bearing no 23136 cck/w33, pillow block housing no sd 3136 ats (free) suitable for bearing no 23136 cck/w33, pillow block housing no sd 3156 ats suitable for bearing no 23156cck/w33, pillow block housing no sd 3148 ts suitable for bearing no 23148 cck/w33
Tender For this work consists of concrete columns for foundation, solid block work for walls, rcc roof slab, electrification, plumbing, furniture ,computer networking and demolishing of existing village office building.
Tender For yearly rate contract for various items of construction and supply for bhuj, dist. kachchh (year 25-26) second attempt - excavation for foundation upto 1.5m depth including sorting out and stacking of useful materials and disposing of the excavated stuff all lead all steta, excavation for foundation depth from 1.5 mt. to 3.00 mt. depth including sorting out and stacking of useful materials and disposing of the excavated stuff all lead. all steta, providing and laying cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 machine cut stone aggregate 40mm nominal size ) and curring complete including cost of formwork in (a) foundation and plinth, providing and laying cement concrete 1:4:8 (1- cement : 4- coarse sand : 8- hand broken stone aggregates 40 mm nominal size) and curing complete including cost of formwork in (a) foundation and plinth, providing and laying cement concrete 1:2:4 (1- cement : 2- coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (a) foundation and plinth, providing & laying controlled cement concrete m-250 and curing complete including the cost of formwork but excluding the cost of reinforcement for reinforced concrete work in (a) foundation footing base of column and mass concrete, providing & laying controlled cement concrete m-250 and curing complete including the cost of formwork but exluding the cost of reinforcement for reinforced concrete work in beam (c) slabs, landings, shelves, balconies, lintel, beams, girders and cantilever upto floor two level., providing & laying controlled cement concrete m-250 and curing complete including the cost of formwork but excluding the cost of reinforcement for reinforced concrete work in lintel (c) slabs, landings, shelves, balconies, lintel, beams, girders and cantilever upto floor two level., providing & laying controlled cement concrete m-250 and curing complete including the cost of formwork but excluding the cost of reinforcement for reinforced concrete work in chhajja (c) slabs, landings, shelves, balconies, lintel, beams, girders and cantilever upto floor two level., providing & laying controlled cement concrete m-250 and curing complete including the cost of formwork but excluding the cost of reinforcement for reinforced concrete work in column (d) columns, pillars posts and struts upto floor two level, providing & laying controlled cement concrete m-250 and curing complete including the cost of formwork but reinforcement for reinforced concrete work in slab (c) slabs, landings, shelves, balconies, lintel, beams, girders and cantilever upto floor two level., providing & laying controlled cement concrete m-250 and curing complete including the cost of formwork but excluding reinforcement for reinforced concrete work in wall (b) walls, from top of foundation level up to floor two level, providing & laying controlled cement concrete m-200 and curing complete including the cost of formwork but excluding reinforcement for reinforced concrete work in stair case (e) staircases excluding landing up to floor two level, providing and laying 1:2:4 (cement :2 course sand :4 crushed stone aggregate 20 nominal size) and curing complete including cost of form work in (a) wall caps/ copping, providing and laying reinforcement for r.c.c. work and bending, binding & placing in position completed upto floor two level thermo mechanical treated bars as per i.s.i (fe-415) major brand, providing tmt bar fe 500/500d reinforcement for r.c.c. work including bending, binding and placing in position complete upto floor two level major brand, extra for additional lift of reinforcing steel for all r.c.c. work above floor two level., extra for additional lift of concrete for all r.c.c. work above floor two level excluding cost of reinforcment, white stone bela mesonry block in course in superstructure with stone of approved quality in lime mortar 1:1.5 (1-lime putty : 1.5- finesand) including p
Tender For supplying all labour, material and t&p for laying of pipe lines, supplying & fiting of sluice valves, construction of valve chamber, providing fhtc in connection with pws to tumbagada, andanda & sapuakhata under patrapur block. - annexure - a, laying of pipe lines, fiting of sluice valves construction of valve chamber providing fhtc in connection with pws to tumbagada, supplying all labour and t&p for earth work in all kinds of soil within 50 m initial lead and 1.5 m initial lift including rough dressing and leveling etc., in foundation and plinth as per direction of engineer in-charge., supplying all material, labour , t&p for laying of following od hdpepipes conforming to is 4984-2016 and specials of the following outside diameter and class-4 to class-5 and jointing by fusion welding method including testing etc. all complete as per direction of engineer-in-charge, 160mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, 110mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, 90mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, supplying all labour, t&p for filling in pipe line trenches with excavated materials including watering etc., all complete including proper care to the laid pipe lines to prevent damages of pipes and specials as per the direction of engineer-in-charge., supplying all labour, materials, and t&p for drilling perfectly horizontal bore of required dia so as to accommodate following size hdpe. pipe line into the hole including inserting the pipe with out disrupting the traffic or cutting road including jointing with water main pipe lines etc, (excluding cost of pvc pipe) and as per the direction of engineer-in-charge, 160 mm dia hdpe pipe, supplying all labour and t&p for cutting cement concrete road for taking pipe line etc., complete and as per direction of engineer-in-charge., supplying all materials, labour t&p for making good to the damages of cutting of cement concrete road for taking pipe line and with 40 mm size crusher broken metal concrete etc., cc (1:4:8) of thickness 0.10 mtr and top 12 mm size crusher broken chip;s concrete cc(1:2:4) of thickness 0.075 mtrs including all cost, conveyance, royality of materials including watering, curing and ramming etc., all complete and as per specification and direction of engineer-in-charge, supplying all materials, labour and t&p for fixing of following sizes of c.i. sluice / non return valves with double flanged ends for water works purpose for following nominal diameter including cost of nuts and bolts, rubber insertion as per specification etc., complete., 150 mm dia c.i s.v, 150 mm dia c.i n.r.v, 100 mm dia c.i s.v, 80 mm dia c.i s.v, supplying all materials, labour and t&p for fixing of 15mm to 25 mm dia single air valve including fitting of required pvc service saddle for water works purpose for following diameter, including drilling the water main as per specification etc., complete., supplying all materials, labour, t&p for construction of brick masonry sluice valve and non return valve chambers of internal size 90x90x120cm with all lead royalty etc. such as earth work excavation, bed concrete with c.c. (1:4:8), kb brick in c.m. (1:6), 12mm cement plaster with c.m. (1:4), rcc cover slab with cc 1:2:4 etc., and as per approved p.h. drawing and design etc., complete and direction of engineer-in-charge., supplying all materials, labour and t&p for fabricating, fitting and fixing with specials at the required site using hot dip galvanized pipes of medium class and standard weight of reputed make (tata / zindal make) confirming to is 1239(p.1)2004/is:1161 of the following dia including cutting the pipes and flanges drilling the bolt holes matching the pipes flanges and jointing with proper gradient and alignment, welding with using electrodes, fitting, fixing using mobile diesel generator set etc., complete as per direction of engineer-in-charge to be used to cross drainage work incl