Latest column pipe Tenders | Government column pipe Tenders

corporations/Associations/Others

CTN :38195741

25 Nov, 2024 2.65 Lacs

Multi City - Gujarat

Tender For bid documents for providing and fixing submersible pumping machinery (upvc column pipe) for indiranagari area under 15th finance grant (2022-23) at anklav nagarpalika, anklav(2nd attempt)

Central Government/Public Sector

CTN :38005126

18 Nov, 2024 45.72 Lacs

Mundra - Gujarat

Tender For corrigendum : provn of 02 in nos bore wells alongwith associated items at icgs mundra - material and labour for drilling of 02 nos pilot/trial bore by direct rotary rig method including all t&p through any kind of starta (soil, kankar, boulder or soft or hard rock) down up to 150 m depth below ground level by using suitable drill bit according to levering of casing pipe including the cost of mud pit, channels, etc and disposal of soil obtained to a distance not exc. 1 km away complete all as specified. note:- (i) the drilling shall be continued up to specified depth and in case sticky clay occurs in between the drilling must be stopped and hydrologist of gws & sb shall be contacted & eggr-in-charge shall be informed.(ii)cost of this consultant shall be borne by contractor (iii) taking the samples from the bore well cutting for every 3 meter interval and every change in strata if less than 3meter. (iv) preparation of litho logs based on these samples.(v) drill time log to be prepared and prescribed., (vi) aquifer performance tests at constant discharge with draw down and recovery reading.(vii) after completion of pilot bore, the contractor shall have to arrange for electro eater logging test of each bore.(viii) contractor have also produced bore well water test report for drinking water parameters before levering of motor and pump.(note:- if water quality not found fit for domestic purpose use then all other connected items of trial bore will not be executed.) , supply assembling, jointing, lowering and fixing in the bore hole pvc casing pipe of nominal dia 315 mm (medium well) ,10 kg/cm2 working pressure, confirming to is 4985-2000 including providing pea gravel of 8 mm to 4.6mm size for packing around the casing/slotted pipe in bore well all as specified and directed. make: astral/ashirwad/ajay/sfmc, all as per item no 2.00 above but slotted pipe. , supply, assembling, jointing, lowering lead free pvc column pipes of nominal dia 65 mm, od 75 mm (min), non toxic, pressure 16 kg/cm2 with and including top and bottom adaptor (ss) and accessories like epdm ring and double ss stud all as spd and directed by engineer-in-charge. make: astral/ashirwad/ajay/sfmc, development of tube well with compressed air by means of air compressor of suitable capacity not less than 300 cfm and over pumping using suitable capacity pump to make available water free from turbidity complete all as specified and directed by engineer-in-charge., m & l for conducting yield test for the bore well by continuously pumping for 24 hours by using a submersible pump set to determine safe pumping yield and produced water test report of samples which is collect every hour complete as directed by the engineer-in-charge. [ all arrangements for yield test shall be made by contractor and cost for the same borne by contractor ], supply and fix ms reducer, bail plug, top cover made of 3mm thick ms plate for bore well in two half sections having a hole of 75 mm bore in centre to accommodate pvc pipe and submersible cable suitable for fixing to the pvc casing pipe top, electric logging and simple strata box including provision of 2 sets of ms clamps made of 50x6mm ms flat including nuts, bolts, etc. including one coat of epoxy primer and two coats of epoxy paint wherever necessary complete all as specified and directed by engineer-in-charge., supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, water lubricate, 3 phase, 10.0hp (appx) 415 volts, 50 hz with suitable submersible electric motor suitable for discharge of 2 liters per second against total head of 125m in the bore complete all as specified and directed by the engineer-in-charge. [ note : column pipe, submersible cable and control gear will be measured and paid separately]. [make: kirloskar / crompton / ksb], supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, wa

CTN :38113868

18 Nov, 2024 NA

Tuticorin - Tamil Nadu

Tender For supply of t- joint cover plate for cooling water pump column pipe of unit i at cooling water pump house - i note:1. prospective bidders may get the specification free of cost by downloading from websites.tnpgcl : www. tangedco.gov.innic : https://tntenders.gov.in/nicgep/apptn govt. : http://www.tender.tn.gov.intender opening (electronically):o/o the superintending engineer/p&a/ttps tuticorin. (executive engineer/mm/ttps)

CTN :38113873

18 Nov, 2024 NA

Tuticorin - Tamil Nadu

Tender For fabrication and supply of bottom column pipe for cooling water pump 5c of unit v. note:1. prospective bidders may get the specification free of cost by downloading from websites.tnpgcl : www.tangedco.gov.in nic : https://tntenders.gov.in/nicgep/apptn govt. : http://www.tender.tn.gov.intender opening (electronically):o/o the superintending engineer/p&a/ttps tuticorin. (executive engineer/mm/ttps)

corporations/Associations/Others

CTN :38166610

18 Nov, 2024 10.63 Lacs

Patan - Gujarat

Tender For water supplying motar pump, cable and column pipe and penal bord at different water works in chasman city area at, chanasma nagarpalika, chanasma (2nd attempt)

State Government

CTN :38173565

18 Nov, 2024 1.12 Lacs

Ganderbal - Jammu And Kashmir

Tender For supply, installation, testing and commissioning of 65mm dia gi c class column pipes for wss wudder manasbal ganderbal

CTN :38137926

14 Nov, 2024 1.74 Crore

Ganganagar - Rajasthan

Tender For supply of spares of various pumps make sam turbo forahp (model: ar200/550, vw 150/340aars, chc 150/500 and 13md 80/205) installed at unit 1, 2 and 5 and ca(model ars 80/290 and tcnn 80/300) installed at unit 1 to 6, stps, suratgarh - , impeller for ist stage pump with nut (clockwise direction) part no. 18 a material, nihard type- iv, wear plate (bracket side) (part no.16, material:- nihard type- iv), wear plate (suction side) (part no. 19, material nihard type - iv, lantern ring (part no 13, material:- astm a743 cf 8m), oil level (seal) indicator part no 54 , material glass with brass, gland housing (part no. 9, material alloy ci), inner casing (part no. 17, material nihard type -iv), expeller [ part no:- 14, material:-nihard type-iv], liquid thrower (part no.11,material:- astma216 gr wcb, flange( suction cover), lock nut[ part no:- 47, material:-astm a216 gr wcb ], impeller for iind stage pump with nut (anti-clockwise direction) (part no. 18 b,, material:- nihard type -iv), shaft for i st pump with nut (clockwise direction) part no. :- 4, material :- bs 970 en8), brearing spacer (part no.7, material :- is 210 fg 200), shaft sleeve (part no. 12, material astm a 743 ca 15), shaft for iind stage pump with nut (anti-clockwise direction), outer bearing cap (part no.5 material :- is 210 fg 200), inner bearing cap (part no.6 material :- is 210 fg 200), gland ring (part no.:- 24 materail:- astm a 216 gr wcb), spring (part no.:- 41, material:- steel), brearing spacer (part no.7a, material :- is 210 fg 200), dome nut & t bolt, outer casing(bottom) & outer casing(top) (part no. 15 & 20 ) material is 210 fg 260, spring plate part no. 41 a material :- is 210 fg 260, complete bearing assembly (fitted with shaft & bearing etc.) for iind stage pump, spares of verticle pump model: vw 150/340a+ars unit 1, 2 & 5, ratchet collar part no. 53.852, material is 226 c15, circlip part no. 94.055, material steel, drive shaft (part no.22.352), meterial:-aisi 316, drive column pipe part no. 72.352, material erw ms c class, pump column pipe part no. 72.354, material erw ms c class, star support(part no.31.152, meterial:-is 210fg 200, bush bearing(pump/star) 1 set consist of each 1 setno.) (part no.:- 55.552 &, 55.553,meterial:-rub ms sleeve), impeller(part no.24.2, meterial:-nihard type-iv), wear plate(b.side ) (part no.:-14.53, meterial:-alloy ci), wear plate(s.side ) (part no.:-14.54), meterial:-alloy ci, inner casing part no. 11.23, material alloy ci, bearing collar part no. 53.952, material is 226 c15, bearing housing part no.36.052 meterial:- 210 fg 200 ), gland housing (part no. 46.3, material:- is 210 fg 200), pump shaft (part no. 22.3, material:-aisi316), coupling ring, coupling nut & coupling sleeve (part no. 87.053,87.052,87.452, material, :- aisi 316), ratchet pin (part no. 53.752), material aisi-410, bearing cap with ratchet part no. 37.052, material is 210 fg 260, lantern ring (part no 46.10), material:- bs 970 en-8, outer casing (b. side) part no. 11.25, material is 210 fg 260, outer casing (s. side) part no. 11.24, material is 210 fg 260, complete pump assembly with motor set, model vw 150/340a+ars, discharge cap, 225 m3/hr, head 20 m, size 150 x 150, rpm 1450, input power 30 kw, input voltage, 41510%, 50 hz, bare pump with base plate, coupling, column and delivery pipe,, strainer, adjusting screw part no. 91.19, material: is 1363 ms (1 set = 4 nos.), slurry pump model: ar200/550 (04 nos.) unit # 5 & 6, split gland, wear plate (b. side) 16, wear plate (s. side) 19, impeller with nut (clock wise direction with de) 18, lantern ring 13, suction cover 21, inner casing 17, shaft sleeve, dome nut & t bolt, spring, bearing spacer (1 set=2 nos), gland housing 09, bracket side cover 25, complete bearing assembly (fitted with shaft & bearing etc.), casing cover (part no. 17.3) mtl. is 210 fg 260 for sam make pump, model chc 150/500, pump shaft (part no. 22.3) mtl.aisi 410 for sam make pump model chc, 150/500, i

State Government

CTN :38142443

27 Nov, 2024 4.43 Lacs

Kamalpur - Tripura

Tender For lifting, lowering of different capacity burnt/disorder submersible pump motor in/c maintenance of starter, main switch along with column pipe assembly with all acessories of existing sbdtw scheme and other allied works group-ii

State Government

CTN :38142447

27 Nov, 2024 4.43 Lacs

Kamalpur - Tripura

Tender For lifting, lowering of different capacity burnt/disorder submersible pump motor in/c maintenance of starter, main switch along with column pipe assembly with all acessories of existing sbdtw scheme and other allied works group-i