Web Analytics Made Easy - StatCounter

Compact Archive System Tenders

Get complete information related to latest Compact Archive System Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Compact Archive System Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Compact Archive System Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

CTN :45363421 Due date: 12 Jun, 202612 Jun, 2026 NA
Tender For purchase of equipments ( s.no 1 to s.no 2 ) for eee department - purchase of equipments, 3 phase power rectifier3 phase power rectifier 100a (motorized) cubicle panel type 440 v ac, 3-phase input / (0 300 )vdc variable output 3-phase isolation transformer-20kvathyristor rating: current rating: 300 a piv rating: 1500 vsuitable heat sink arrangement provided- 6-pulse fully controlled bridge rectifier using scrs overload protection and necessary panel instruments (ammeter,voltmeter) with motorized dimmer statand automatic controlshort-circuit protection,thermal protection,emergency stop., single phase single pule sinusoidal pwm inverter using mosfet / gbt kittype : single phase pwm inverter trainerpower device : mosfet / igbt based inverter circuitinput supply : 12 24 v dcoutput voltage : 30 v rms acoutput phase : single phaseoutput frequency: 0 50 hz variableoutput power : 100 wsingle pulse pwm operationsinusoidal pwm (spwm) operationvariable frequency controlpwm generation and firing control circuit inbuiltgate driver circuit provided test points provided for waveform observation and analysisbuilt-in resistive load provisionsuitable for dismantling and reassembly

Central Government/Public Sector

CTN :45372548 Due date: 10 Jun, 202610 Jun, 2026 NA
Tender For supply of upper cover, middle cover and lower cover of cubicle box low voltage panel to edts-355, rev-0 for lhb eog non ac coaches as per drg. no-cc72084. item no.21, 5 and 15 only. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45361263 Due date: 11 Jun, 202611 Jun, 2026 NA
Tender For supply, installation, testing & commissioning of tools, equipment and consumables for school of engineering - addressable fire alarm control panel, addressable smoke detector with base, addressable multisensor detector with base, addressable heat detector with base, addressable manual call point (mcp), addressable audio-visual strobe, addressable input/output module, addressable isolator module, addressable control module, addressable monitor module, addressable repeater panel, addressable zone module, programming software & license, programming tool / interface, laptop for programming, loop simulation / fault kit, wooden wiring cubicle with metal framing, 18v brushless cordless jigsaw machine, heavy duty cable cutter, cable insulation remover, deburring tool, spirit level 1200mm, precision screwdriver set, quick/trigger clamp, step bit, hole saw, tubular crimping tool, magnetic wrist belt, tool belt, tool trolley, non contact tachometer, phase sequence meter, 3-phase multifunction meter, squirrel cage induction motor with mechnical loading, break drum type), single phase induction motor including centrifugul switch along with starting and running capacitor, soft starter for motors, dol starter, star delta starter, power quality meter, upgraded fault simulator, 5 pin industrial plug and socket, spirit level, pipe cutter, plastic), plastic rounder, plastic pipe chamfer, external bending spring, external bending spring, internal bending spring, internal bending spring, crimping tool, , over head shower with shower arm 300 mm, thermostatic mixing valves, digital inclinometer, copper tube bender, rothenberger standard bender, rothenberger robend 4000 set, portable hand held electric pipe threading machine, hdpe butt fusion machine, co2 cylinder with gas, co2 regulator with preheater, vfd, inverter, battery charger indicator, multimeter, clamp meter, earth resistance tester, potentiometer, voltmeter, micron vacuum gauge, all weather air conditioner, 4- way reversing valve, open pcb of outdoor unit of inverter type air conditioner, advanced leak detector, portable oscilloscope, contact tip 1.2mm, gmaw nozzle, mig wire spool, 1.2mm, dye penetration test kit, fcaw wire spool, 1.2mm, wraping foil for wire roll, mesh cable tray, mesh bracket support , l type, mesh bracket support , c type, mesh tray nut bolt coupler, pvc trunk (mms), pvc trunk (mms), pvc casing caping (mms), pvc casing caping (mms), pvc conduit (mms), pvc conduit (mms), gi washers, self threaded screw, din rail, race way ( small holes ), pvc cable, pvc cable, pvc cable, pvc cable, pvc cable, pvc cable, pvc cable, pvc cable, pvc cable, pvc cable clip, pvc wire, tubular lug, angle holder, cable tie mounts, modular box, modular plate, intermediate switch, bell push switch, pg pvc gland, masking tape, masking tape, control panel, surface light, pvc conduit male & female adapter, distribution board, r 600a refrigerant gas can, lithium-ion battery, lead acid battery, pcb, verrow board, resistor, resistor, zener diode, diode, transistor, transistor, transistor, transistor, capacitor, capacitor, capacitor, capacitor, voltage regulator ic, step down transformer, ups battery, ni-mh battery, led, smd led strip, led lamp, heat sink, dc -dc led driver, switch, test switch, teflon tape, programming cable, batteries for panel, cpvc pipe – 20 mm, cpvc pipe – 25 mm, cpvc 20 mm elbow 90°, cpvc 25 mm elbow 90°, cpvc 20 mm tee, cpvc 25 mm tee, cpvc 25×20 mm reducer coupler, cpvc 25×20 mm tee, cpvc 20 mm coupler, cpvc 25 mm coupler, cpvc union 20/25 mm, cpvc reducer 25×20 mm, cpvc mta, cpvc mta, cpvc fta, cpvc fta, cpvc tank connector, cpvc 20 mm end cap, cpvc 25 mm end cap, thread seal tape, cpvc solvent cement, cpvc brush set, pex-al-pex pipe, pex-al-pex pipe, pipe clips / supports, pipe clips / supports, fitting holding clamps, fitting holding clamps, equal tee (pushfit type), equal tee (pushfit type), reducing tee (pushfit type), reducing tee (pushfit type), female tee (push

Central Government And Public Sector

CTN :45326445 Due date: 09 Jun, 202609 Jun, 2026 6.20 Lacs
Tender For electrical works for revamping of the high tension ht incomer panel and ct, pt and metering cubicle at jipmer, urban health centre juhc -kuruchikuppam

CTN :45338776 Due date: 29 May, 202629 May, 2026 NA
Tender For supply & installation of 04 seater cubicle work station table size:750w x 600d x 750/1050ht. (in mm), 45 mm thick panel 1050ht.750 x1050 & 600 x1050,45 mm thick panel 1050ht.p/f of panel based modular workstations of 45 mm thickness with extruded aluminum end post of size 45x16.5mm with continuous vertical locking arrangement for interconnection of two adjacent panels. top trim is of aluminum section of size 45x12mm and snap fitted on its base of size 45x20mm. the aluminum frame work is supported on lower and upper partition block. bottom block is made up of 9mm prelaminated particle board of desired shade which is pasted on 33x25mm thick particle board baton frame, which is properly screwed to end post and bottom electrical race way. upper block is fixed above the table top and is made up of particle battens fixed with 9 mm thick pin board and cloth of desired shade, optionally white board or glazing can be provided instead of pin board. raceway- one bottom raceway is provided as standard for drawing wires along the width of panel. the raceway is covered with aluminum extruded plates from both sides and snap fitted with aluminum extruded raceway clip. the modular switch & socket plates can be mounted & punched onto the raceway panels with easy cable connectivity & accessibility in case of any repairs etc. table tops to be made up of 25mm thick pre laminated particle board. the tops are supported on partition with the help of cantilevers. all work tops fixed at the standard anthropometric working height of 750mm from the ground level & finished with well filleted edges, thus making those users friendly. a circular hole is provided on every w/top to facilitate the easy connection of cpu & monitor wires & is covered with a modular wire manager made in abs. gable end is made up of 18mm pre-laminated particle board of desired shade and screwed to top with help of brackets. used to support w/tops at the exposed ends giving an openness to all workstations, cubicles etc. the keyboard trays are made out of 18mm thk plpb & mounted under the worktop with sliding channels [ warranty period: 30 months after the date of delivery ] ]

CTN :45279811 Due date: 10 Jun, 202610 Jun, 2026 1.50 Crore
Tender For supply of long range fixed wing plane integrated with three axis gimbal camera day and night for training and surveillance along with accessories , first person view fpv drone with digital goggles more than three point five inch upto five inch , fully integrated quadcopter training drone with three axis gimbal camera , spare fpv propellers , spare quadcopter propellers , spare batteries for fpv , spare batteries for quadcopter , steel racks for storage , obstacle course , mock up targets miniature , battlefield arena with branding and turf , digital score board and scoring system , led goal posts , ttt program , installation and commissioning , three dof drone stability jig , propeller balancer upto thirty four inch propellers , flight controller and calibration station , battery diagnostic station , three d printer with filament , soldering and rework station , tooling station drone service and service tools , consumables wires comma connectors comma nuts comma bolts comma straps comma lipo safe bags , cad designing station for three d printing , cad workstation license basic and advance , fixed wing aeromodels with detachable parts , fixed wing diy kit , diy rtf quadcopter kit for assembly training , quadcopter frames , bldc motors for quadcopter , esc for quadcopters , propellers for quadcopter , flight controllers plus gps module for quadcopter , remote controllers for quadcopter , battery for quadcopter , battery chargers for quadcopter , gimbal camera for quadcopter , hexacopter frames , bldc motor for hexacopter , esc for hexacopter , propellers for hexacopter , flight controllers plus gps module for hexacopter , remote controllers for hexacopter , battery for hexacopter , gimbal camera for hexacopter , battery charger for hexacopter , fpv frames , fpv motors , four in one esc for fpv drone plus flight controller , propellers for fpv drone , remote controller for fpv drones , battery for fpv drones , battery charger for fpv drone , payload dropping mechanism , three d printing station cabin , drone assembly station cabin , two sided soldering work station with shelves , platform for flight controller calibration station , platform for battery charging and diagnostic station , cubicle for cad designing , closed racks for storage , chairs rotating , one point five ton split ac , simulator hardware , drone simulator software various formats , vr simulator , vr goggles for fpv simulator , chairs , platform for simulator station , led tv for parallel display , partitions panels , ups for power backup , tables for vr simulator , connectors hdmi cables comma power cables comma wires comma etc , wall mounted eighty five inch interactive panel , four point one surround sound speakers with setup , lecture stand , wall mounted white board , racks for storage , cubicle for instructor , chairs with writing platform , training aids set , flex boards , acrylic board for all labs , wall paneling of all labs , fire extinguisher , interactive kiosk , polycarbonate roof panel for area seven into seven with iron angles

CTN :45284241 Due date: 28 May, 202628 May, 2026 NA
Tender For supply & installation of 04 seater cubicle work station table size:750w x 600d x 750/1050ht. (in mm), 45 mm thick panel 1050ht.750 x1050 & 600 x1050,45 mm thick panel 1050ht.p/f of panel based modular workstations of 45 mm thickness with extruded aluminum end post of size 45x16.5mm with continuous vertical locking arrangement for interconnection of two adjacent panels. top trim is of aluminum section of size 45x12mm and snap fitted on its base of size 45x20mm. the aluminum frame work is supported on lower and upper partition block. bottom block is made up of 9mm prelaminated particle board of desired shade which is pasted on 33x25mm thick particle board baton frame, which is properly screwed to end post and bottom electrical race way. upper block is fixed above the table top and is made up of particle battens fixed with 9 mm thick pin board and cloth of desired shade, optionally white board or glazing can be provided instead of pin board. raceway- one bottom raceway is provided as standard for drawing wires along the width of panel. the raceway is covered with aluminum extruded plates from both sides and snap fitted with aluminum extruded raceway clip. the modular switch & socket plates can be mounted & punched onto the raceway panels with easy cable connectivity & accessibility in case of any repairs etc. table tops to be made up of 25mm thick pre laminated particle board. the tops are supported on partition with the help of cantilevers. all work tops fixed at the standard anthropometric working height of 750mm from the ground level & finished with well filleted edges, thus making those users friendly. a circular hole is provided on every w/top to facilitate the easy connection of cpu & monitor wires & is covered with a modular wire manager made in abs. gable end is made up of 18mm pre-laminated particle board of desired shade and screwed to top with help of brackets. used to support w/tops at the exposed ends giving an openness to all workstations, cubicles etc. the keyboard trays are made out of 18mm thk plpb & mounted under the worktop with sliding channels [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45298671 Due date: 09 Jun, 202609 Jun, 2026 NA
Tender For auction sale of pole assy, cubicle, vcb, etc as per lot description details,ct,36kv, pt,36kv,100va,control panel, pole assy, surge arrestor etc as per lot description details,vcb,36kv, ct,145kv, pt,145kv etc as per lot description details,pole assy,36kv, c and r panel, triple feeder etc as per lot description details,ct,145kv as per lot description details,pt,145kv, cvt,245kv etc as per lot description details,vcb,36kv,pt,145kv etc as per lot description details,mocb,36kv, vcb,36kv etc as per lot description details,ct,36kv,400-200/1a,2c as per lot description details,pole assy,36kv, vcb,36kv etc as per lot description details

Central Government And Public Sector

CTN :45101866 Due date: 02 Jun, 202602 Jun, 2026 NA
Tender For (1)construction of new substation panel room, staff room and store room at brd, (2) extension of electrical panel room of substation at tmr under the jurisdiction of aden/tmr & (3) construction of panel room, meter cubicle room at kamptee substation under aden/tr./nagpur

CTN :45184559 Due date: 20 May, 202620 May, 2026 5.70 Lacs
Tender For providing chimney for 8 no of type-v quarters, replacement of existing metering cubicle panel at survey of india campus, koramangala, bengaluru.
 Loading, Please wait...

Connect us via What's Up