Get complete information related to latest Compound Lighting Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Compound Lighting Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Compound Lighting Tenders.
Tender For urgent repair and renovation of elerctrical work room no. 19a with central hall, and entire compoundlighting of administrative building, barrackpore in connection with upcoming election, 2026. under barrackpore electrical section i under barrac
Tender For bid to ras bid to ras supply of providing, fabrication and fixing of false ceiling in conference hall at dd free dish dth todapur, delhi as per respective drawing sg 10150 , providing of 600mm x 600mm hinged flap flushed doors and fixing it on the ceiling as per requirement of site at dd free dish dth todapur, delhi , providing and applying of 50mm x 50mm x 12mm wooden cornice at all around false ceiling in conference hall at dd free dish dth todapur, delhi , providing and applying of wall finish, putty and pop on walls to make smooth finish for premium emulsion paint in conference hall at dd free dish dth todapur, delhi, after touching on corners etc. , providing and applying 2 coats of wall primer and water based luxury emulsion paint on false ceiling and walls etc. in conference hall, after touching on corners, joints and screw heads etc. , fixing of 2ftx2ft recessed led light fixtures, as per respective drawing with supply of 1.5 sq.mm single core copper cable with laying and wiring of recessed mounted led light and make ready , opening space shall be provided in ceiling equal to the size of aluminium supply and return air grill, diffuser, damper of conference hall at dd free dish dth todapur, delhi ) /bid number : gem/2025/b/6892486 * /dated: 17-11-2025 & & / bid document 1 / 17
Tender For supply of supply of various type of firefighting equipment d d -dcp 09 kg stored pressure type , dcp 06 kg stored pressure type , m foam 9 ltr stored pressure type , water 9 ltr squeeze grip type , co2 2 kg squeeze grip type , co2 4point5 kg squeeze grip type , co2 6point8 kg squeeze grip type , water mist backpack type fire extinguisher , trolley mounted 50 ltr foam extinguisher , floating pump , portable pump , blower cum exhauster , fire retardant dangri or suit , light weight pistol grip triple action h , aqueous film forming foam afff 3 percentage , fog nozzle with extension applicator wit , branch with revolving head , foam making branch fmb 5x , foam making branch fmb 10x , diffuser branch
Tender For corrigendum : maintenance of electrical installation and fans ic compoundlighting for 96 da flats for mayur vihar ph-ii, delhi. replacement of burnout mccb, street light fittings and other accessories
Tender For supply of materials for electrification work in different buildings of vadodara municipal corporation. - supplying led indoor fittings with leds of wattage 0.2 watt to 0.5 watt assembled on single mcpcb, with housing used as a heat sink shall be made of thick sheet steel conforming to is: 513/crca/ aluminium die cast powder coated and high u.v. & corrosion resistance with diffuser with company mark/name 160v to 270v, power factor more than 0.95, thd < 15%, cct 3000 k to 6500k, luminaire efficacy> 85 lumens/watt ,led led driver efficiency > 85 % ( fitting required lm-79 & lm-80 certificates)(note: below description have shown ranges of wattage capacity of led fittings.the engineer incharge may select any wattage capacity between the ranges shown.)(a) tube light with integral driver(iii) 20 watts, surge - 2kv,ip-20, conventional 4 feet. sor no.: 2-15-1. cat iii. make : philips/ wipro/osram, providing following type of modular type accessories with necessary connection. as desired by engineer in charge. (1) 6 amp. sp one way switch. sor no.: 1-2-7. make : anchor woods/ legrand, providing following type of modular type accessories with necessary connection. as desired by engineer in charge. (2) 16 amp. sp one way switch. sor no.: 1-2-7. make : anchor woods/ legrand, providing following type of modular type accessories with necessary connection. as desired by engineer in charge. (3) 6/16amp. universal socket. sor no.: 1-2-7. make : anchor woods/ legrand, supplying upvc mini trunking (pvc casing-n-capping) having doublelocking arrangement with grooves, trunking of size not below 12.5 mm in height as per is with accessories of pvc/resin polypropylene not below 1.8 mm thick duly sealed in joint & erected on wall / ceiling of following size . (1) 20 mm. sor no.: 1-3-5 , providing following type of modular type accessories with necessary connection. as desired by engineer in charge. (4) 6 a socket. sor no.: 1-2-7. make : anchor woods/ legrand, providing mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size.(e) in existing pipe.(a) 2 wire 1.5 sq. mm. sor no.: 1-4-1(e). make : polycab/kei/finolex, providing mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size.(e) in existing pipe.(b) 2 wire 2.5 sq. mm. sor no.: 1, supplying flexible pvc insulated multi strand multi core 1.1 kv grade isi marked copper wires of following size to be erected as directed.(e) 1.50 sq.mm 3 core round pvc sheathed. sor no.: 1-4-5. make : polycab/kei/finolex, supplying and erecting flexible pvc insulated multi strand multi core 1.1 kv grade isi marked copper wires of following size to be erected as directed.(h) 2.50 sq.mm 3 core round pvc sheathed. sor no.: 1-4-5.make : polycab/kei/finolex, providing following shockproof tissino type accessories erected on 3 mm thick pc (polycarbonate) sheet in pvc/ metal/wooden box. erected on wall/ ceiling. (1) one no single pole 6 a switch. sor no.: 1-6-1. make : anchor/straco, providing following shockproof tissino type accessories erected on 3 mm thick pc (polycarbonate) sheet in pvc/ metal/wooden box. erected on wall/ ceiling. (2) one no 3/5 pin 6 a socket. sor no.: 1-6-1.make : anchor/straco, providing following shockproof tissino type accessories erected on 3 mm thick pc (polycarbonate) sheet in pvc/ metal/wooden box. erected on wall/ ceiling. (5) one no single pole 16 a switch & one no 6/16 a universal socket combined. sor no.: 1-6- 1.make : anchor/straco, providing following shockproof tissino type accessories erected on 3 mm thick pc (polycarbonate)
Tender For additional works for electrical wiring along with supply, installation of decorative led fittings, pedestal fan, ac, geyser, led television, compoundlighting at 2nd floor of administrative building of stp iii, near 2nd raf battalion camp, fulbari.
Tender For tender for supply of conference chair as per requirement , red foot mat , formation sign insigma , oil diffuser , food thermometer , thermos steel 1 ltr , emergency light , water camper , wall mounted emergengy led light , peg table , vaccum cleaner , sofa chair , hand wash for offrs washroom , hand wash for jco/or washroom , backrest , replacement of existing sunmica of wooden table , panneling of drona hall
Tender For supply of electrical materials for day to day maintenance of ei at balak ram hospital. - supply of 6- 32 amps rating, sp mcb, c curve, 10 ka breaking capacity., supply of 6- 32 amps rating, dp mcb, c curve, 10 ka breaking capacity., supply of 40 amp, 2 pole isolator ., supply of 63 amp, 2 pole isolator ., supply of 63 amp, 4 pole isolator ., supply of 100 amp, 4 pole isolator ., supply of 40 amp rating 2 pole rccb, 30 ma ., supply of 63 amp rating, 4 pole rccb, 30ma ., supply of 20 a, spn, industrial type socket outlet, with plug top and metal chained cover in sheet steel enclosure., supply of 25 mm dia isi marked, pvc conduit, supply of pvc batten / angle holder., supply of 2+6 way, spn, single door, mcb db, supply of 2+2 way, spn, single door, mcb db, supply of 4 way (4 + 12), tpn, mcb db, double door horizontal type., supply of 6 way (4 + 18), tpn, mcb db, double door horizontal type., supplying of led recessed/surface down lighter (round /square/ rectangular) smd type of following body material with pmma and prismatic diffuser and construction as per is : 10322 with driver as per the requirement with driver efficiency >85%, operating voltage ac 140-270 volt, freq 50/60 hz, operating temp range - 15 deg to 40 deg centigrade, internal surge protection of 2.5 kv with short & open circuit protection ,thd 10% , p. f. 0.95, ip20, cri >80, ugr (unified glare rating) 19, flicker free, (flicker should be below 5 %), life time (led,driver & electrical circuitary), life time of minimum 50000 burning hours with , 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report, cct 3000 k / 4000 k / 5700 k / 6000 k /6500 k (as per ansi bin) , sdcm(standard deviation color matching) 3, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. complete in all respect i/c connections with 1.5 sq mm frls, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy 105 and 120 lm/watt output . lm79 & lm80 test report from nabl lab for all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by engineer-in-charge as per requirement. (thermal management: heat sink of aluminium housing such that led junction temperature shall not rise above 90 c). powder coated die cast /extruded aluminium body including trim with aluminium reflector. 12 -15 watt, supplying of panel light 2x2 ft., of following body material and construction as per is : 10322 with driver as per the requirement with driver efficiency >85%, operating voltage ac 140-270 volt, freq 50/60 hz, operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 kv with short & open circuit protection,thd 10% , p. f. 0.95, ip20, cri >80, ugr (unified glare rating) 19, flicker free, (flicker should be below 5 %), life time (led,driver & electrical circuitary), of minimum 50000 burning hours with , 70% of initial lumen maintained till life ends ,cct 3000 k / 4000 k / 5700 k /6000 k/6500 k (as per ansi bin), sdcm(standard deviation color matching) 3, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard and trade mark certificate (t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. complete in all respect i/c connections with 1.5 sq mm frls, pvc insulated copper conductor single core cable and earthing etc. as required withminimum 5 year oem warranty. system lumen efficacy >135 lm/watt output . lm79 & lm80 test report from nabl lab for all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by eng
Tender For corrigendum : supply of electrical items for repair and maintenance of electrical installation at iiser bhopal - supply of 22 (+/-2) watt led tube light betten t-5 made of aluminium/pc body with pc diffuser with inbuilt driver for proper driving of leds. the minimum system lumen output 100lm/watt, and p.f>0.9. the cct of led used should be between 5700k to 5000k only. (make: havells/crompton/philips/wipro/orient/panasonic/ jaquar)., supply of 10 (+/-2) watt led tube light betten t-5 made of aluminium/pc body with pc diffuser with inbuilt driver for proper driving of leds. the minimum system lumen output 100lm/watt, and p.f>0.9. the cct of led used should be between 5700k to 6000k only. (make: havells/crompton/philips/wipro/orient/panasonic/jaquar)., supply of 38 (+/-2) watt recessed mounted 2x2 feet led light fitting with pc diffuser with inbuilt driver for proper driving of leds. the minimum system lumen output 100lm/watt and p.f>0.9, up to 2 kv surge protection. the cct of led used should be between 6000k to 6500k only (make-havells/crompton/philips/wipro/orient/ panasonic/jaquar), supply of 38 (+/-2) watt surface mounted 2x2 feat led light fitting with pc diffuser with inbuilt driver for proper driving of leds. the minimum system lumen output 100lm/watt and p.f.> 0.9, up to 2 kv surge protection. the cct of led used should be between 6000k to 6500k only (make-havells/crompton/philips/wipro/orient/ panasonic/jaquar)., supply of surface mounted ceiling light 18 watt led light fitting with pc diffuser with inbuilt driver for proper driving of leds. the minimum system lumen output 100lm/watt and p.f. 0.9, up to 2 kv surge protection. the cct of led used should be between 6000k to 6500k only (make:-havells/crompton/philips/ wipro/orient/ panasonic/jaquar)., supply of recessed mounted (11) ceiling light 22 (+/-2 watt led light fitting with pc diffuser with inbuilt driver for proper driving of leds. the minimum system lumen output 100lm/watt and p.f 0.9, up to 2 kv surge protection. the cct of led used should be between 6000k to 6500k only. (make-havells/crompton/philips/wipro/orient/ panasonic/jaquar), supply of surface mounted motion sensor ceiling light 10 watt led light fitting with inbuilt driver for proper driving of leds. the minimum system lumen output 100lm/watt and pf>0.9, up to 2 kv surge 6000k to protection. the cct of led used should be between (make-havells/crompton/philips/wipro/orient/ panasonic/jaquar) 6500k only, supply of 10 watt (+/-2 watt) bulkhead light fitting with inbuilt driver for proper driving of leds. the minimum system lumen output 100 im/watt and p.f>0.9, up 10 2 kv surge protection. the cct of led used should be between 6000k to 6500k only. (make:-havells/crompton/philips/ wipro/orient/ panasonic jaquar), supply of 10 watt track (study lamp) light fitting with inbuilt driver for proper driving of leds. the minimum system lumen output 100 im/watt and p.f>0.9, up to 2 kv surge protection. the cct of led used should be between 6000k to 6500k only. (make: havells/crompton/philips wipro/orient/ panasonic/jaquar), supply of 45 watt (+/-2 watt) streetlight fitting with inbuilt driver for proper driving of leds. the minimum system lumen output 100 lm/watt and p.f. 0.9, up to 2 kv surge protection. the cct of led used should be between 6000k to 6500k only. (make: havells/crompton/philips wipro/orient/ panasonic/jaquar), supply of aesthetically designed post top led luminaire smd of 40 w+ 5%, rated voltage 240v ac, 50 hz. ip 65 protection, system lumen efficacy > 90 lumens/w, voltage range 140-270 v ac, pf 20.95, cct: 5700k-6500 k, thd-10%, cri->70, operating temperature 0°c to 50°c, (make havells/crompton/philips/wipro/orient/panasonic/ jaquar)., supply of aesthetically designed tripod style inverted pyramid bollard of 0.8m to 0.9m heighted led light of 10 (+/-) 2 w at 230 v ac operation, ip 65 protection, voltage range 150-260 v ac, pf>0.9, cct: 5400k 6500k, surge protection 4.5kv made up of aluminium casti