Latest compressing testing machine Tenders | Government compressing testing machine Tenders

corporations/Associations/Others

CTN :39418209

06 Mar, 2025 2.90 Crore

Ahmedabad - Gujarat

Tender For supplying & installing nabl approved equipments for civil worktesting at piplaj hotmix plant for ahmedabad muncipal corporation.(amc) - electronic weighing balance -30 kg-1 gm, precision electronic balance-500 gm-0.01 gm (10 mg)-auto calibration, electronic weighing balance -5 kg-0.5 gm (500 mg), electronic platform balance-300 kg-50 gm-platform size 600 x 600 mm, high precision electronic balance -100 gm-0.001 gm (1 mg)- external calibration, water testing kit - hardness, water testing kit- sulphates, water testing kit chlorides, coarse sieves - 45 cm dia-g.i.-100.00 mm, fine sieve - 20cm dia-brass-10 mm, sieve shaker-gyratory-for 20/30 & 45cm dia sieves with digitaltimer, hot air oven-digital-45x45x45 cm-250c-inner s.s. chamber, liquid limit device - motorisedas per is : 2720 (partv) with revolution counter and grooving tools., pipette borosilicate glass - 1 ml, measuring cylinder - borosilicate glass - "0" bottom - 100 ml., water still-(ss 304)-(compact )-4 ltr/hour, compact cbr load frame-electrical-single speed, non nuclear density gauge (soil), rapid moisture meter-0 - 25 percentage with pressure gauge, standard penetration test apparatus with accessories - motorised, digital constant temp. waterbath for marshal test -6 moulds-100 mm, bitumen extractor - motorised with variable speed with digital rpm indicator with ac motor and drive, automatic compactor for marshal test - 4" dia specimen, unconfined compression tester-digital (marshal), ductility testing machine - digital temp control - refrigerated - is 1208, ring and ball apparatus-(programmable)-(digital)-(astm d36) with accessories, thin film oven - as per is 9382 as per is:9382., sand equivalent value test apparatus with accessories, sand equivalent mechanical shaker - motorized (astm d2419) with digital rpm indicator and digital timer, standard penetrometer for bitumen - automatic digital timer - dial gauge as per is 1203, is 1448. astm d5., saybolt viscometer - with digital controller and motorised stirrer - astm d88, pensky marten flash point apparatus-digital with motorised stirrer, asphalt content oven-(asphalt ignition oven)-(astm d6307), planetary mixer-for bituminous mix-digital- 20 ltrs, hardness tester for bitumen mastic asphalt with accessories, infrared thermometer - (-50c to 500 c), digital thermometer-(dtm 100)-300c-(cr/al (k))- with 12" long temp.probe, round hot plate-c.i. top-digital-20 cm, compression testing machine - 2000 kn-automatic pace rate controlled, compression testing machine - 2000 kn-digital - manual pacecontrol- auto calculation, cube mould-15 cm-isi marked u is:10086., concrete permeability tester - as per din 1048 - 3 cell - with air compressor, laboratory needle vibrato include 25mm needle with 6 meter long rubber shaft, laboratory concrete mixer-tilting drum type, vibrating table-100 x 100 cm, aggregate impact testing machine with blow counter, flow table (cement)-motorised - 25cm dia - m.s. top - is 5512, air entrainment meter - 0.005 cubic mtr - is: 1199 with accessories, los angeles abrasion testing machine - with presettable digital counter, riffle sample divider - g.i. 25mm - no. of slot : 16, electronic weighing balance -30 kg-1 gm, precision electronic balance-500 gm-0.01 gm (10 mg)-auto calibration, electronic weighing balance -5 kg-0.5 gm (500 mg), electronic platform balance-300 kg-50 gm-platform size 600 x 600 mm, high precision electronic balance -100 gm-0.001 gm (1 mg)- external calibration, water testing kit - hardness, water testing kit- sulphates, water testing kit chlorides, coarse sieves - 45 cm dia-g.i.-100.00 mm, fine sieve - 20cm dia-brass-10 mm, sieve shaker-gyratory-for 20/30 & 45cm dia sieves with digitaltimer, hot air oven-digital-45x45x45 cm-250c-inner s.s. chamber, liquid limit device - motorisedas per is : 2720 (partv) with revolution counter and grooving tools., pipette borosilicate glass - 1 ml, measuring cylinder - borosilicate glass - "0" bottom - 100 ml., water still-(ss 304)-(compact )

State Government

CTN :39340889

05 Mar, 2025 5.00 Lacs

Baramulla - Jammu And Kashmir

Tender For annual maintainence of assets including wages outsourced through stage contract. - providing and fixing orginal raitwood penalling ,including 12mm ply backing, complete with necessary screws complete job as per the directions of engineer in charge., providing and fixing kd kanas (2.5x1.5) with necessary screws complete job as per the directions of engineer in charge., providing and fixing specified board medium density exterior grade (grade i) to frame, backing or studding with screws etc. complete (frames, backing or studding to be paid separately) : pre-laminated with decorative lamination on both sides mdf board conforming to is:14587 18 mm, providing and fixing ist quality ceramic glazed wall tiles conforming to is : 15622(thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer- in-charge, over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete., providing and laying ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to is:15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.in all colours, shades, except white, ivory, fume red brown, p/f 10 litres without fittings low level cistern (vitreous china), providing and fixing 50 litre geyser along with connection pipes and all neccasry fittings (venus, jaquar,racold ), providing and fixing 15 mm nominal bore c.p. brass bib cock of approved quality conforming to is : 8931, providing and fixing 15 mm nominal bore c.p. brass angle valve for basin mixer and geyser points of approved make conforming to is : 8931, providing and fixing kitchen sink with c.i. brackets, c.p. brass chain with rubber plug, 40 mm c.p. brass waste complete, including painting the fittings and brackets, cutting and making good the walls whereverrequired.18.10.1 white glazed fire clay kitchen sink of size 600x450x250 mm, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot and cold water supply, including all cpvc plain and brass threaded fittings. this includes jointing of pipes and fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer-in-charge. 19.3.1 internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing 19.3.1.1 15mm nominal outer dia pipes., providing and placing on terrace (at all floor levels) polyethylene water storage tank isi : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank

Central Government And Public Sector

CTN :39431018

14 Mar, 2025 NA

Khorda - Odisha

Tender For supply of 20 mm cpvc pipe , 20 mm cpvc plain tee , 20 mm cpvc plain elbow , 20 mm15 mm cpvc brass tee , 20 mm15 mm cpvc brass elbow , short body bib cock , long body bib cock , pillar cock , conseal stop cock , pvc cistern , 32mmupvc pipe , 32mmupvc plain elbow , orissa pan comfort , english western commord , seat cover , wash basin , waste coupling , pvc waste pipe , 24 inch pvc connection pipe , angular stop cock , urinal squating pan , basin bracket , anchot rack bolt , 75mm pvc pipe , 75mm pvc tee , 75mm pvc elbow , 20mm mta , 20mm x 32mm rs , testing plug , solvent cement cpvc 500ml , solvent cement pvc 100ml , teflon tape , 1 inch extension pices , health faucet pipe , grating jali , 20mm transaction bush , 20mm cpvc socket , service charges for above plumbing work , dismantling of tile , wall tile work , floor tile work , scraping and cleaning of wall surface , painting work , ply door , pvc door

State Government

CTN :39390242

04 Mar, 2025 29.29 Lacs

Hoshiarpur - Punjab

Tender For providing, laying, jointing and fixing of pvc pipes 6kg/cm2 isi marked as per isi-4985 ( isi marked with prior approval of engineer-in-charge) casting along the trenches and laying the same in trenches to correct alignment and gradients, cutting. jointing and testing complete as per specifications . including specials and excavationa) excavation by mechanical means (for more than 3 mtr street width)pvc pipe 63mm o/dpvc pipe 75mm o/d pvc pipe 90mm o/d pvc pipe 110mm o/dpvc pipe 160mm o/db) excavation by mannual means (for more than 3 mtr street width)pvc pipe 63mm o/dpvc pipe 75mm o/ddismantling brick or flagged stone flooring without concrete base and relaying of dry brick on edge paving with a dismantled bricks including sand grouting and including restoration of roads to orginal positionpvc pipe 63mm o/ddismantling of mattalled road and reconditioning of road cut in its original condition. (for road crossing)dismantling and re-fixing of interlocking tilepvc pipe 63mm o/ddismantling of cement concrete road and restoration in original condition complete in all respectproviding and fixing c.i/d.i flanged end stem of ss (ais 1410) and bronze (gunmetal) working parts sluice valves isi marked 14846-2000 including jointing,testing&costs of nuts and bolts & insertion of sheet, all carriage complete (with approval of engineer in charge (ivc/kirloskar/audco or equivalent make)80mm i/d100 mm i/d150 mm i/dconstruction of masonry sluice valve chamber excluding sluice valve cover as per standard design & drawings of public health size 0.6m x 0.6m0.9m x 0.9mmaking connection with existing pipe line "house service connections providing proposed water connection to house hold up to wall with providing, laying jointing, testing gi pipe lines 15mm i/d=2.50 mtr b- class ,( above gl), prov. & fixing mdpe pipe 15mm i/d with specials 2.00 mtr (below gl) including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and isi marked 15mm i/d gm ferrule as per is: 2692 and 3"" i/d clamp with c.i bib cock 15mm i/d as per is:210 with stainless steel spindle of approved make as per ."carriage of material sandbajribricksextra of steel fe-500

State Government

CTN :39373897

03 Mar, 2025 9.95 Lacs

Muktasar - Punjab

Tender For special repair of main items at judicial court complex, malout - civil, dismentling glazed tiles (to be carefully removed), scraping cement plaster., 12.5 mm thick cement sand plaster 1:5, removing doors and windows (steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. doors of area 3 sqm and below, deodar wood chowkhats including iron hold fasts iron hinges corner straps clears, stops wooden knobs fixed in position. single rebate (60mmx100mm), painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade., factory manufactured solid flush door fixed in position hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position cost : is2202-1(1999) commercial with elm or gurjan facing on both/sides with laminated core and lipped edges. 35 mm thick., applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface., finishing wall with exterior decorative cement based on water soluble paint such as snowcem, robbiacem etc. two or more coats to give an even shade., preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete., distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade., precast chequred tiles of 20mm minimum thickness in ordinary grey cement without chips laid on 20mm thick bed of cement mortar 1:3 (1 cement 3 sand) with neat cement slurry between joints and over the base for floors, treads of steps and landings., finishing walls with textured exterior paint of required shade with two or more coats applied@ 3.28 litre/10 sqm over and including base coat of water proofing cement paint applied@2.20 kg/10 sqm., providing & fixing glass panes with nails and putty or wooden strip complete in all respect. glazing area above 0.09 sqm. 4mm thick or 10.78 kg/ sqm., cost of aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (excluding sliding bolt). for shutter area above 0.50 sqm., credit of doors with chawkhats, public health, providing, installing, testing & commissioning of air conditioners split casting 1.5 tone-5 star invertor technology capacity units including suitable copper pipe, waste pipe, angle frames / stand with outdoor etc. of reputed make such as carrier /voltas complete in all respects., credit of old material, indoor unit 1.50/ 2.00 ton, outdoor unit 1.50/ 2.00 ton

Central Government/Public Sector

CTN :39101478

21 Feb, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For corrigendum : supply of electrical panel with accessories - c83640001432 supply of electrical panel along with busbar - incomer - outgoing - refer annexure 5a - scope of supply , 100000000001 supply of ip55 or above outdoor distribution box having 200a mccb 25ka incomer - refer annexure 5a - scope of supply , 100000000002 supply of ip55 or above outdoor distribution box having 150a mccb 25ka incomer - refer annexure 5a - scope of supply , 100000000003 supplying of lt power cable with aluminium conductor xlpe insulated pvc inner sheathed galvanised steel-3point5 core of size 70sqmm-refer annexure 5a-scope of supply , 100000000004 supplying of lt power cable with aluminium conductor xlpeinsulated pvc inner sheathed galvanised steel-having 3point5 core of size 300 sqmm-refer annexure 5a-scope of supply , 100000000005 supplying of end termination kit with brass compression gland and aluminium lugs for 3point5c x 70sqmm-refer annexure 5a-scope of supply , 100000000006 supply of end terminations kit of 3point5 core 300 sqmm size of cables - refer annexure 5a - scope of supply , 100000000007 supply of material for earthing with copper earth plate 600 mm x 600 mm x 3 mm thick refer annexure 5a - scope of supply , 100000000008 supply of 25 mm x 5 mm copper strip at 0point50 metre below ground -refer annexure 5a - scope of supply , 100000000009 supply of material for earthing with gi earth plate 600 mm x 600 mm x 6 mm thick -refer annexure 5a - scope of supply , 100000000010 supply of 25 mm x 5 mm gi strip at 0point50 metre below ground as strip earth electrode -refer annexure 5a - scope of supply , 100000000011 supplying of 90 mm dia od 90 mm and id 76 mm nominal size hdpe pipe isi marked-refer annexure 5a - scope of supply , 100000000012 supplying of materials for in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level -refer annexure 5a - scope of supply , 100000000013 shifting loading unloading placing installation testing and commissioning of above mentioned panel this includes foundation civil work-refer annexure 5b-scope of erection , 100000000014 shifting loading unloading placing installation testing and commissioning of above mentionedrefer annexure 5b-scope of erection , 100000000015 making end termination with brass compression gland and aluminium lugs for 3point5c x 70sqmm size of pvc insulated -refer annexure 5b - scope of erection , 100000000016 making end terminations of 3point5core 300 sqmm size of cables -refer annexure 5b - scope of erection , 100000000017 installation testing and commissioning of earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories -refer annexure 5b - scope of erection , 100000000018 installationtesting and commissioning of 25 mm x 5 mm copper strip -refer annexure 5b - scope of erection , 100000000019 installation testing and commissioning of earthing with gi earth plate 600 mm x 600 mm x 6 mm thick including accessories-refer annexure 5b - scope of erection , 100000000020 installation testing and commissioning of 25 mm x 5 mm gi strip-refer annexure 5b - scope of erection , 100000000021 laying of one number pvc insulated and pvc sheathed xlpe power cable above 35sqmm and upto 95 sqmm-refer annexure 5b - scope of erection , 100000000022 laying of one number pvc insulated and pvc sheathed xlpe power cable above 185 sqmm and upto 400 sqmm-refer annexure 5b - scope of erection , 100000000023 laying of one number pvc insulated and pvc sheathed xlpe power cable above 185 sqmm and upto 400 sqmm -refer annexure 5b - scope of erection , 100000000024 laying and fixing of one number xlpe or pvc insulated and pvc sheathed or xlpe power cable -refer annexure 5b - scope of erection , 100000000025 mouling through the existing roads in any kind of soil-laying of hdpe pipe 90mm pipes for cables etc-refer annexure 5b-scope of erection , 100000000026 excavation of the cable trenches in hard rock not exceeding 1point5 met

Central Government/Public Sector

CTN :39031785

24 Feb, 2025 97.00 Lacs

Jabalpur - Madhya Pradesh

Tender For corrigendum : certain maintenance work under ge east jabalpur - m & l for painting carefully (by taking necessary shut down from respective sub-station) on steel tubular poles 9 m high from (above grnd 7.5rm) upto top of the pole, including cross arms, bracings, clamps, cable protection pipes, street light clamps & pipe (fix to poles) with two coats of 1st quality aluminium paint after preparation of surface by wire brush and painting with two coats of synthetic enamel paint, after preparation of surface with different colour code from ground level to 1.0 m high with writing pole no. of suitable size of letters as directed. note : size of lettering and colours of paints will be directed by engr-in-charge., m & l for painting carefully (by taking necessary shut down from respective sub-station) on lt pcc pole 9 m high from (7.5 metre above natural ground ) upto top of the pole, applying two coats of cement base paint over a coat of alkalines resistant primer to surface of concrete pole with cement based paint after preparation of surfaces of poles including cross arms, bracings, clamps, cable protection pipes, street light clamps & pipe (fix to poles) with two coats of 1st quality of synthetic enamel paint, after preparation of surface with different colour code from ground level to 1.0 m high with writing pole no. of suitable size of letters as directed. note : size of lettering and colours of paints will be as directed by engr-in-charge., diasmantling of acsr or aac conductors of any size from lt poles or distrubution span of complete all as specified & directed., fixing only binding from disc/shackle/loop insulator etc and rebinding after tightening/restringing of aacsr/aac/lt over head conductors of any size with and including 14 swg binding wire and testing, complete all as specified & directed., m&l for acsr conductor lt (6 in 1) weasel type ,restringing and fixing it properly in between poles and connecteing it with insulator properly all as per required and directed by engg in chrge, dismantling gi wire of any size from lt poles or distribution span & removal from site, complete all as specified and directed., fixing only binding from disc/shackle/loop insulator etc and rebinding after tightening/restringing of galvanised steel wire 3.15 or 4 mm dia lt over head earth wire, complete all as specified & directed., m&l for over head galvanised steel wire 3.15 or 4mm dia on existing lt poles and stretching and then strengthening including binding & jointing the conductor and testing complete all as specified and directed., m & l for danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with m.s. clamps, bolts and nuts of approved size, for lt, 20x15cm size complete all as specified and directed., dismantling old unserviceable insulators of any type including ms spindles, gi washers, nuts etc and s&f shackle type, porcelain, vitreous, white/brown or green insulator including galvanised mild steel straps(31x5mm), two gi washers & one gi nut, 100 mm height and 115 mm dia(max) suitable for working pressure 1100 volts grade, complete all as specified and directed., s&f pvc separator 2 way for lt overhead electric line complete all as specified and directed., s&f pvc separator 4 way for lt overhead electric line complete all as specified and directed., supply and fix, erection steel tubular swaged poles type 410 sp-31 (9 meter long), painting with two coat of aluminium paint over one coat of red oxide primer and marking pole nos with black sythetic enamelled paint including tarring one coat of steel surface embedded in concrete complete excluding earth work and pcc work and taking out old unserviceable lt pole complete all as specified and as directed., dismantling lt steel tubular poles and setting aside for re-use within 50 metres complete all as specified

Central Government And Public Sector

CTN :39357790

08 Mar, 2025 NA

Khorda - Odisha

Tender For renovation of toilet - description of goods , 20mm cpvc pipe , 20mm cpvc plain tee , 20mm cpvc plain elbow , 20mmx15mm cpvc brass tee , 20mmx15mm cpvc brass elbow , sort body bib cock , long body bib cock , pillar cock , conseal stop cock , pvc cistern , orissa pan comfort , english western commord , seat cover , wash basin , waste coupling , pvc waste pipe , 24 inch pvc connection pipe , angular stop cock , urinal flat back small , basin bracket , anchot rack bolt , 75mm pvc pipe , 75mm pvc tee , 75mm pvc elbow , 20mm mta , testing plug , solvent cement cpvc 500ml , solvent cement pvc 100ml , teflon tape , 1 inch extension pices , health faucet pipe , grating jali , 20mm transaction bush , 20 mm cpvc socket , service charges for plumbing work , dismantling of tiles , wall tile work , floor tile work , scraping and clearing of wall surface , painting work , ply door

State Government

CTN :39261308

24 Feb, 2025 34.46 Lacs

Hoshiarpur - Punjab

Tender For , providing, laying, jointing and fixing of pvc pipes 6kg/cm2 isi marked as per isi-4985 ( isi marked with prior approvel of engineer-in-charge) casting along the trenches and laying the same in trenches to correct alignment and gradients, cutting. jointing and testing complete as per specifications . including specials and excavation, a) excavation by mechanical means (for more than 3 mtr street width), pvc pipe 63mm o/d, pvc pipe 75mm o/d, pvc pipe 90mm o/d, pvc pipe 110mm o/d, b) excavation by mannual means (for more than 3 mtr street width), pvc pipe 63mm o/d, pvc pipe 90mm o/d, dismantling brick or flagged stone flooring without concrete base and relaying of dry brick on edge paving with a dismantled bricks including sand grouting and including restoration of roads to orginal position. complete in all respect, pvc pipe 63mm o/d, pvc pipe 90mm o/d, dismantling of mattalled road and reconditioning of road cut in its original condition. (for road crossing)complete in all respect, dismantling of cement concrete road and restoration in original condition complete in all respect, providing and fixing c.i/d.i flanged end stem of ss (ais 1410) and bronze (gunmetal) working parts sluice valves isi marked 14846-2000 including jointing,testing&costs of nuts and bolts & insertion of sheet, all carriage complete (with approval of engineer in charge)., 80mm i/d, 100 mm i/d, construction of masonry sluice valve chamber excluding sluice valve cover as per standard design & drawings of public health size, 0.6m x 0.6m, making connection with existing pipe line ,complete in all respect, "house service connectionsproviding proposed water connection to house hold up to wall with providing, laying jointing, testing gi pipe lines 15mm i/d b- class ,( above gl), prov. & fixing mdpe pipe 15mm i/d with specials (below gl) including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and isi marked 15mm i/d gm ferrule as per is: 2692 and 3"" i/d clamp with c.i bib cock 15mm i/d as per is:210 with stainless steel spindle of approved make as per .", carriage of material, sand, bajri, bricks, extra of steel fe-500, ,

Central Government/Public Sector

CTN :39325175

24 Feb, 2025 NA

Kanpur - Uttar Pradesh

Tender For supply of standards sand for testing cement - is 650 (q3)

Compressing Testing Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors