Latest compression testing machine Tenders | Government compression testing machine Tenders

Central Government And Public Sector

CTN :44807756

22 Apr, 2026 NA

Lumding - Assam

Tender For at hji-design, supply, installation, testing and commissioning of a passenger lift of 14 passengers (952 kg) capacity for g+1 floors (approx. 10 m travel), machine : gearless with permanent magnet motor located in the shaft at the top as per rdso specification no:rdso/2013/em/spec/0016 (rev '2'')-2025, complete with all associated electrical, mechanical and civil interface works and accessories, including 1.0 m/s vvvf drive, automatic centre-opening doors (minimum clear opening 700 - 2000 mm), car height 2400mm, finished floor height 2600 mm, pit depth 1600 mm and headroom 5000 mm; equipped with traction machine suitable for 952 kg load with 8-19s fibre-core self-lubricating ropes, guide rails, buffers and complete hoisting/suspension system; microprocessor-based monoblock control panel with closed-loop control, safety torque-off, automatic rescue device (ard), fireman operation, overload protection, emergency alarm/light and all mandatory safety features as per rdso spec; stainless-steel car with led lighting, ventilation fan, handrail, voice announcement system, vandal-resistant cop & lop with digital indicators; including all cabling, earthing, testing, commissioning, statutory clearances and handing over, along with 2 years comprehensive warranty covering all parts, labour and service. cost includes free maintenance of two years during warranty of lift as per rdso spec no.rdso/2013/em/spec/0016 (rev'2') - 2025 make-johnson/otis/schindler/omega elevators /techno industries or equivalent. [ warranty period: 24 months after the date of delivery ]

corporations/Associations/Others

CTN :44328348

29 May, 2026 NA

Atthipattu Puthunagar - Tamil Nadu

Tender For corrigendum : ennore sez - establishment of flue gas desulphurisation (fgd) system and its auxiliaries for 2 x 660 mw ennore sez under single epc basis. - engineering, procurement and construction (epc) contract for complete design, engineering, manufacture/procurement, assembly, inspection, testing at manufacturer’s works, packing, forwarding, transporting and insurance, supply of complete machineries (complete mechanical, electrical, instrumentation & control systems and civil, structural & architectural works and mandatory spares at site), assembly, erection, testing, commissioning, trial/ reliability run, conducting performance guarantee tests and handing over of flue gas desulphurisation system and auxiliaries for 2 x 660mw ennore sez supercritical thermal power project at ash dyke of nctps, , tamil nadu.

corporations/Associations/Others

CTN :44348671

28 Apr, 2026 NA

Atthipattu Puthunagar - Tamil Nadu

Tender For corrigendum : tangedco nctps i 3x210mw installation of semi dry flue gas desulphurization system - tangedco – nctps-i–(3x210mw) – installation of semi dry flue gas desulphurization system complete design, engineering, manufacture / supply, inspection and testing at supplier’s works, packing, forwarding to site, transportation, unloading, storage, preservation, insurance, handling at site, pre-assembly, assembly, erection / supervision of erection, final painting, start-up, pre-commissioning, testing & trial run, commissioning, performance guarantee testing and warranty of fgd system up to completion of warranty period, training of purchaser’s personnel for complete fgd equipment / system covering all mechanical, electrical, c&i, associated steel structure, civil & architectural works for semi dry flue gas desulphurization system in all units of3 x 210 mw steam generators with complete associated auxiliaries, accessories and other related items of respective work for the complete fgd plant and equipment on turnkey engineering, procurement and construction basis, necessary for putting into operation, a highly reliable, safe, efficient and environmentally compliant fgd plant in order to reduce the sox emission to comply the new environmental norms in 3x210mw units of nctps i, athipattu, tiruvallur dist., tamil naduunder single epc basis.

corporations/Associations/Others

CTN :44376209

05 May, 2026 NA

Atthipattu Puthunagar - Tamil Nadu

Tender For corrigendum : engineeringprocurement and construction epccontract for complete design engineering manufacture - tangedco – nctps-ii–(2x600mw) – engineering, procurement and construction (epc) contract for complete design, engineering, manufacture/procurement, assembly, inspection, testing at manufacturer’s works, packing, forwarding, transporting and insurance, supply of complete machineries (complete mechanical, electrical, instrumentation & control systems and civil, structural & architectural works and mandatory spares at site), assembly, erection, testing, commissioning, trial/ reliability run, conducting performance guarantee tests and handing over of flue gas desulphurisation system and auxiliaries for 2x600 mw north chennai thermal power station-ii, chennai-600120, tamil nadu.

CTN :44538239

09 Apr, 2026 NA

Shimla - Himachal Pradesh

Tender For bid to ras tender for supply of laundary and cleaning service : : - servicing and checking of laundry plant including washer hydra and extractor and its accessories complete with the following a to check the all controller switches selector switch indicators main panel etc b to check the complete main switch panel contactors electical and mechanical spares c to check the power supply source testing of entire laundry plant without load and with load to check all system components reliable or obsolete note after replacement of the all defective components testing and funtioning of system should be carried out satisfactorily , supply only 0 60 timer , supply only 0 15 timer , supply only off delay timer , supply only water pressure switch , supply only contactor no 18 amp , supply only 30 kg washing bearing 22208 , supply only 30 kg washing sleev h308 , supply only 16mm gland dori 1 mtr , supply only breake pale assembly , supply only reverse and forward controller , supply only 30 kg hydro rubber buffer gasket , supply only hydro spring , supply only 6 mm pneumetic pipe 2 mtr with gland , supply only 3 mtr door gasket with sr 555 , supply only dryer heater 24 inch , supply only drier lupping , hydro motor rewinding , supply only mccb 4 pole , servicing spare fixing testing & commissioning charges

CTN :44772458

04 May, 2026 NA

Multi City - Multi State

Tender For supply, installation, testing and commissioning of 01 nos. 500 lph industrial ro system with s.s. chillers in mechanical workshop at izzatnagar.

Central Government / Public Sector

CTN :44542993

14 Apr, 2026 2.78 Crore

Nungambakkam - Tamil Nadu

Tender For design, supply, installation, testing and commissioning of complete tank gauging system for storage tanks and dyke valve position sensor at indian oil androth island depot and indian oil barrel filling facility kavaratti island along with related - design, supply, installation, testing and commissioning of complete tank gauging system for storage tanks and dyke valve position sensor at indian oil androth island depot and indian oil barrel filling facility kavaratti island along with related civil, mechanical, cabling and allied works at union territory of lakshadweep under kerala state office.

Central Government And Public Sector

CTN :44434795

24 Apr, 2026 2.20 Crore

Mumbai - Maharashtra

Tender For design, supply, installation, testing and commissioning of exhaust ventilation system with other mechanical utilities for s-60 shed, barc, mumbai-085 - design, supply, installation, testing and commissioning of exhaust ventilation system with other mechanical utilities for s-60 shed, barc, mumbai-085.

CTN :43247439

05 Jan, 2026 NA

Multi City - Chhattisgarh

Tender For corrigendum : design, construction, testing, commissioning of all the components of interception and diversion based sewage treatment plant (stp) work including 05 years of operation and maintenance of the entire system.• survey, investigation, design and construction of various diversion drains of inner size 0.50m(w) x 0.50m(h) for a length of 10m, 1.00m(w) x 1.20m(h) for a length of 10m and 1.00m(w) x 1.00m(h) for a length of 210m• survey, investigation, design and construction of coarse, medium screen, grit chambers of various sizes as detailed in scope of work for each wet well.• design and construction of 3 no. wet wells with overhead pump house as per the technical specification• survey, investigation, design, supply, laying, jointing and construction of rising main (di-k9 pipe) of inner dia. 150 mm for a length of 950m and dia. 100 mm for a length of 100m• stp (2 nos) - designing (aesthetically), providing, and constructing and giving satisfactory trials of sewage treatment plant consisting of receiving chamber, screen chamber, grit chamber, measuring flume, distribution chamber with primary and secondary treatment, etc. as per the technical specification of capacity 0.50 mld of facultative aeration lagoon convensional technology including allied units for waste disposal with all civil and mechanical, electrical works involved including administration cum laboratory building of minimum carpet area of 800 sqft. complete with all electrical works.• design and construction of planted drying bed for co-treatment of faecal sludge - 4 nos. of size l- 5.00 x w- 2.00 x height as per design + free board 0.30)• boundary wall around entire stp area, internal and external electrification.• operation and maintenance (o&m) for the proposed works / entire sewerage system (proposed) for a period of 5 years after successful completion of trial run period or handing over whichever is later.

CTN :44726681

08 Apr, 2026 2.29 Lacs

Ajmer - Rajasthan

Tender For supply of equipment and other materials to the lab operated at ganj godown municipal corporation, ajmer. - supply of core cutting machine (diesel/petrol) having specifications max core diameter 200 mm, power source diesel engine, drilling depth 600 mm, motor power 7.5 kw, suitable material concrete, asphalt, rcc, brick, operation mode semi automatic, having arrangement of water supply for test and fitted on wheels. , supply of compression testing machine, 2000kn digital, usage/application cube testing least count in kn 1, frequency 50 hz, automation grade automatic, weight up to 200 kg, motor voltage 240 to 440 v. , supply of core cutting instrument for soil density testing cutter: steel cylinder, 100mm internal diameter, 127.3mm long. accessories: steel dolly (25mm high), rammer. , supply and installation of bitumen testing machine bitumen content determination in bituminous mix having specification capacity 1500 gm, phase 1 phase, frequency 50-60 hz, voltage 220-240v, power source electric. , supply of steel trays having diamention 450 x 350 x 75 mm and heavy-gauge metal (often 18-22 gauge) with reinforced, polished or smooth surface. , supply of rapid moisture meter as per is 12175 specification. including all accessaries. , supply of rebound hammer it should consist of a spring controlled mass which slides on a plunger within a tabular housing, impact energy = 2.25 nm. , supply of scoop ss stainless steel with capacity 500 gm. and 1kg. , supply of digital laser distance meter , supply of vicat apparatus

Compression Testing Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others

Central Government / Public Sector

Central Government And Public Sector