Latest concrete aggregate Tenders | Government concrete aggregate Tenders

State Government

CTN :44921124

06 May, 2026 NA

Dapoli - Maharashtra

Tender For corrigendum : solid and liquid waste management work in village jalgaon block dapoli district ratnagiri

State Government

CTN :44927415

06 May, 2026 NA

Dapoli - Maharashtra

Tender For corrigendum : solid and liquid waste management work in village pajpandhari, block dapoli district ratnagiri

State Government

CTN :44927416

06 May, 2026 NA

Dapoli - Maharashtra

Tender For corrigendum : solid and liquid waste management work in village harne block dapoli district ratnagiri

State Government

CTN :44927417

06 May, 2026 NA

Dapoli - Maharashtra

Tender For corrigendum : solid and liquid waste management work in village gimhavane block dapoli district ratnagiri

Central Government/Public Sector

CTN :44944673

09 May, 2026 NA

Srinagar - Jammu And Kashmir

Tender For corrigendum : job order for calling of open quotation for the under mentioned items - m&l for 3d wall (eps) 100mm thick of density 20kg/m3 with connecting gi wire of 3mm dia and grid size of gi wire mesh should be 50mm x 50mm and the gap between gi wire mesh and eps as minimum 12mm and maximum 20mm for all above a dimensional variation should not be more than 5% completed all as specified and directed., m&l 50mm thick for shot creting with cement mortar of 1:3 ratio with guniting machine all as completed and specified and directed., m&l aac (autoclaved aerated concrete) block masonary of size 600mm x 200mm x 150mm with solid blocks, exceeding 10mm in width and including block joining mortar completed all as specified and directed., m&l for internal 8mm thick polymer modified ready mixed plaster including finished even and smooth surface over aac block masonary completed all as specified., m&l for internal external 15mm thick polymer modified ready mixed plaster including finished even and smooth surface over aac block masonary completed all as specified.

Central Government And Public Sector

CTN :45067056

10 Jun, 2026 NA

Bangalore - Karnataka

Tender For corrigendum : supply of two bold solid base plummer block fsaf 510 of make: winco/skf/ntn/fag fitted with triple seals double row self aligning spherical roller bearing no 22210cck with steel cage of make m/s skf/fag/ntn along with adapter and sleeve to size he 310 of make: m&m/cosmo/sibco/j&j/zkl/amr and locating rings. ]

Central Government And Public Sector

CTN :45067057

10 Jun, 2026 NA

Bangalore - Karnataka

Tender For corrigendum : supply of "winco make 2 bolt, solid base plummer block saf 511 of make:winco/skf/ntn/fag with triple seals and locating ring fitted with drsa roller bearing no. 22211 k with steel cage to suit shaft dia 50mm of make skf/fag/ntn and adapter sleeve h 311 of make m&m /cosmo/sibco/j&j/zkl/amr." ]

CTN :44561178

05 May, 2026 NA

Darjeeling - West Bengal

Tender For bid to ras corrigendum : supply of supply of pre cast rcc box culverts of internal size 1000mm x 2000mm x 1600mm , app bitumen membrane sheet of grade 2504 thickness 3.0mm , cement ppc opc 53 grade in polythene of 50 kg each , sand coarse , graded stone aggregate coarse 20mm , stone aggregate coarse 40mm , quick setting compound , angle iron fencing post fabricated with isa 65x65x6mm of 3.75m long , angle iron corner post struts fabricated with isa 65x65x6mm of 2.43m , flat iron 40x3mm, 2.20m long with five holes for 12mm dia bolt , ms black bolts 12mm dia 50mm long , flat iron 25x3mm, 3.0m long with seven holes for 8mm dia , ms black bolts 8mm dia 50mm long with one hexagonal nut and two 3mm washer , galvanized steel chain link fence manufactured with 3.80mm dia , galvanised steel brt wire , 600 mm dia steel wire entanglements wth galvanised steel concertina coil reinforced with punched , paint synthetic enamel , painting brush 2 inch superior quality , red oxide primer , ms steel wicket gate 1.20m wide single leaf 2.10m height , supply solar lantern model no ms122 solar lantern , 7 kw powered self start portable generator of heavy duty petrol engine , hdpe hose pipe 25mm dia , 1hp petrol water pump of capacity 35cc 4 stroke pertol engine , pcc solid block 400x200x200mm , pre cast rcc bench , 60mm thk heavy duty rubberised mat finish paver block tiles m-40 grade , transparent pipe 5mm dia bore , plaster trowel with wooden handle , fish line , plumb bob iron , galvanised iron pan mortar 18 gauge 16 inch dia , rammer earth with handle , picks axes with chiesel and point ends , showel square nose 14 gauge tata high carbon steel , multipurpose non-slip rubber reusable gloves , brick trowel steel 305 mm , gum boot , plaster rod rod 1.2 m long , water bucket steel 13inch dia , crow bar 5.1 kgs , measuring tape 5 mtr , measuring tape 15 mtr ) /bid number : gem/2026/b/7378640 * /dated: 20-03-2026 & & / bid document 1 / 31

CTN :44561209

05 May, 2026 NA

Darjeeling - West Bengal

Tender For bid to ras corrigendum : supply of frls copper cable 2.5 sqmm single core with multistranded conductor 1100 volts grade in green colour , pvc conduit pipe of 25mm dia 10 feet long. , pvc tee for conduit pipe of size 25mm dia , pvc elbow for conduit pipe of size 25mm dia , pvc clamp suitable for 25mm dia conduit pipe , rawl plug 1.5 inch 25 nos pkt , screw 1 inch 25 nos pkt , decorative wall light fitting 10 watt made up of polycarbonate suitable for 10 w retrofit led bulb , switch piano type 5 amps , switch socket combination multipurpose 3 pin 5 amps and 3 pin 15 amps with gang box , surface plastic box suitable for modular switches and socket of 3 module. , solid plate with base frame suitbale for surface plastic box of 3 module , ceiling rose pvc 2 to 3 terminal , tape insulation 10 mtr , lightning conductor with chemical earthing comprising as per tech specs , electric earthing set complete with items as per tech specs , supply and installation of solar inverter and battery combo 1100 va , heavy duty exhaust fan ms body 300mm sweep with louver shutter , pcc solid block 400x200x200mm minimum strength 50kg per sqcm , 100mm thick interlocking tiles machine pressed precast concrete paver block , cement opc in 50 kg packed in laminated and water proof bag type a and type b , fine sand best quality , stone aggregate graded 20mm , stone aggregate graded 40mm , transparent pipe 5mm dia bore for water leveling , iron bar 600mmx16mm , industrial safety helmet , hammer weight 500 gms with wooden handle , plaster trowel with wooden handle , fish line best quality , plumb bob iron best quality , galvanised iron pan mortar 18 gauge 16 inch dia minimum weight of 1 kg , rammer earth with handle min wt 5 kg without handle , picks axes with chiesel and point ends , showel square nose 14 gauge tata high carbon steel , painting brush 100 mm , synthetic tarpaulin 550 gsm of size 30ft x 30ft , multipurpose non-slip rubber reusable gloves for scrubbing, cleaning, brick work etc , brick trowel steel 305 mm , heavy duty openable props scaffolding made of ms pipe of 60 and 48mm dia , ms centering plates of size 90cm x 60cm of thickness 14 guage , portable ms body needle vibrator machine with power 3 hp to 5 hp

CTN :45063494

23 May, 2026 NA

Bhawanipatna - Odisha

Tender For supply of cnc tools c c - shank twist drill- dia 8.2 , parallel shank twist drill- dia 8.3 , parallel shank twist drill- dia 8.4 , parallel shank twist drill- dia 8.5 , parallel shank twist drill- dia 8.6 , parallel shank twist drill- dia 8.8 , parallel shank twist drill- dia 9 , parallel shank twist drill- dia 9.4 , parallel shank twist drill- dia 9.5 , parallel shank twist drill- dia 9.6 , parallel shank twist drill- dia 9.7 , parallel shank twist drill- dia 9.8 , parallel shank twist drill- dia 9.9 , parallel shank twist drill- dia 10 , parallel shank twist drill- dia 10.1 , parallel shank twist drill- dia 10.2 , parallel shank twist drill- dia 10.5 , parallel shank twist drill- dia 10.6 , parallel shank twist drill- dia 10.8 , parallel shank twist drill- dia 10.9 , parallel shank twist drill- dia 11.4 , parallel shank twist drill- dia 11.5 , parallel shank twist drill- dia 11.8 , parallel shank twist drill- dia 12 , parallel shank twist drill- dia 12.2 , parallel shank twist drill- dia 12.4 , parallel shank twist drill- dia 12.5 , parallel shank twist drill- dia 12.6 , parallel shank twist drill- dia 12.8 , parallel shank twist drill- dia 12.9 , parallel shank twist drill- dia 13 , hss center drill- a3.15 x 8 , hss center drill- a2.5 x 6.3 , hss center drill- a4x10 , hss center drill- a5x12.5 , hss center drill- a6.3x16 , hss center drill- a2x5 , hand reamer- 4h7 , hand reamer- 5h7 , hand reamer- 6h7 , hand reamer- 8h7 , hand reamer- 10h7 , hand reamer- 12h7 , hand reamer- 14h7 , hand reamer- 16h7 , hand reamer- 20h7 , machine reamer- 16h7 , machine reamer- 18h7 , machine reamer- 20h7 , machine reamer- 3h7 , hand tap set- m4 x 0.7 , hand tap set- m5 x 0.8 , hand tap set- m6 x 1 , hand tap set- m8x1.25 , hand tap set- m10 x 1.50 , hand tap set- m12 x 1.75 , hss dies and die nut- m4 x 0.7 , hss dies and die nut- m5 x 0.8 , hss dies and die nut- m6 x 1 , hss dies and die nut- m8x1.25 , hss dies and die nut- m10 x 1.50 , hss dies and die nut- m12 x 1.75 , hss dies and die nut- m14 x 2 , hss dies and die nut- m16 x 2 , hss dies and die nut- m18 x 2.5 , hss dies and die nut- m20 x 2.5 , end mill cutter-solid carbide, dia - 3 , end mill cutter-solid carbide, dia - 4 , end mill cutter- solid carbide, dia - 5 , end mill cutter-solid carbide, dia - 6 , end mill cutter-solid carbide, dia - 8 , end mill cutter-solid carbide, dia - 10 , end mill cutter- solid carbide, dia - 12 , slot drill - solid carbide, dia - 5 , slot drill - solid carbide, dia - 6 , slot drill - solid carbide, dia - 8 , slot drill - solid carbide, dia - 10 , ball nose cutter-solid carbide, dia - 12 , ball nose cutter-solid carbide, dia - 10 , ball nose cutter-solid carbide, dia - 8 , ball nose cutter-solid carbide, dia - 6 , ball nose cutter-solid carbide, dia - 4 , chamfer end mill-solid carbide, dia - dia 10x90 degree , wood ruff cutter-hss, 19.5x6 , dove tail cutter-hss, 30x45 degree , lapping paste, 1 pkt - 400grm , round die handle - 1 inch , round die handle - 13 by 16 inch , round die handle - 1 and half inch , remear and tap handle - small , remear and tap handle - medium , remear and tap handle - large , dead blow hammer - 2lbs , oil stone triangular - 1 by 4 inch x 6 inch , parallal clamp - 6 inch , parallal clamp - 4 inch , dowel pin - dia 8x 50mm , dowel pin - dia 8x 100mm , dowel pin - dia 6x 45mm , dowel pin - dia 6x 30mm , dowel pin - dia 6x 50mm , toolmaker vice pin type - tmvp100 , goose neck clamp - ngc12 , //bid details 2 / 94 stepped strap clamp - nssc12-100 , moulding clamp- with clamping t-bolt and flanged nut - nmc-12t , step block - nsb-2 , adjustable supports plates - nasp-250 , single point cutting tool blank-hss - 1 by 2 inch x 1 by 2 inch x 6 inch , single point cutting tool blank-hss - 1 by 4 inch x 1 by 4 inch x 6 inch , face mill cutter - ygrd12-80z7c27b , face mill cutter - ygrd12-63z6c22b , face mill inserts - rdkt 12 04 mo

Concrete Aggregate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

Central Government/Public Sector

Central Government And Public Sector

Central Government And Public Sector