Latest concrete mixer machine scrap Tenders | Government concrete mixer machine scrap Tenders

CTN :40859793

28 Jul, 2025 NA

Hooghly - West Bengal

Tender For procurement of equipment, instrument, machineries, tools etc. related to laboratories and workshops of mechanical, electrical, civil, chemical engineering and science and humanities departments of hooghly inst of tech. - v notch channel test section: size: 250mm wide, 180mm deep; 600mmlong.materials : made with m.s lined with fiber or s.s 304baffle and deepened entry section for steadying water supply.arrangement for 7 fixing interchangeable notches.set of three brass notchesv notch (60 , 45 ).rectangular notch, electric oven size: 24 x 24 x 24- 03 shelvesspecification: vertical model , triple walled construction: front opening door, top mounted control panel for easy access, inner wall made of stainless steel with mirror polish, outer body made of mild steel with powder coat finish electrically operated thermostat with corresponding indicators. nichrome made long lasting heating elements, high grade glass wool insulation, g.i. made wire mesh shelves with adjustable runners., adsorption isotherm apparatusmagnetic stirrer in multi-position 6 and erlenmeyer flasks with lids (125 ml. - six nos.), distillation unit 1.distillation column : material stainless steel, dia 110mm, seven sieve trays.pressure gauge: bourdon type, 0-2 kg/cm2.rotameter: for cooling water flow rate measurement.steam generator: made of stainless steel, provided with pressure gauge & level indicator, safety valve & insulated with ceramic wool and cladding with aluminium foil.reflux divider: special arrangement to change r/d ratio automatically. condenser: shell & tube type made of stainless steel.bottom product tank: made of stainless steel, capacity 5 ltrs.distillate tank: made of stainless steel, capacity 5 ltrs.heater: nichrome wire heater.temp. sensors: rtd pt-100 typecontrol panel comprises of:digital temp. controller : 0-199.9 c, for steam reboilerdigital temp. indicator : 0-199.9 c, with multi-channel switchwith standard make on/off switch, mains indicator etc.2. flow measurement: rotameter for cold water for condenserdistillation still: material- stainless steel, capacity 5 ltrs (approx.) insulated with ceramic wool and cladding with aluminum foil.condenser: concentric tube type (material- stainless steel)distillate tank: material- stainless steel, capacity 2 ltrs.heater: nichrome wire heater.control panel comprises of :digital temp. controller: 0-199.9 c, rtd pt-100 type (for steam generator)digital temp. indicator: 0-199.9 c with multi-channel switch.temp. sensors: rtd pt-100 typewith standard make on/off switch, mains indicator, set up to determine the linear expansion co-efficient of a metal rod.material of metal bar: copper, length of metal bar(total):500mm, dia: 25mm, no of thermocouples mounted on the bar:6 , no of thermocouples in the insulated shell: 2, heater: band type, cooling jacket dia:75mm, no of thermocouples:10, ammeter: 0-5amp, voltmeter: -0-300v, dimmerstate:1000w, temp indicator: 0-300oc, experimental set up of bricks/walls in series for conductivity measurementdiameter of slab:0.3 m, thickness of bakelite, wood and ms plates: 0.012 m, temp of indicator: 0-300oc, ammeter - 0-5amp, voltmeter- 0-300v,heater: mica type, dimmer state: 1000w, vacuum filtration apparatus with buckner funnel apparatus.material porcelain, for use with (application)suction filtration, product type buchner funnel, glass reciver - 2000 ml, 5000ml , (customised), grade 41 filter paper pkt/ 100, concentric tube heat exchanger apparatusinner copper tube i.d, 12.7mm. and outer g. i. pipe i. d. 15mm. approx. and 1.5m. length.2. thermometers - 4 nos.3. measuring flask - 1 lit. capacity.4. geyser-3 kw. single phase.services required-1. 220v, 15a, stabilized single-phase ac supply.2. floor area - 3m x i m x 1 m height.concentric tube heat exchanger: (a)plain tube ( water to water ):the apparatus consists of two concentric tubes. inner tube consists of copper tube through which hot water flows. while the outer tube consists of gi pipe through which cold wat

CTN :39038230

18 Jul, 2025 12.13 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itot in fitter tradeat iti tarsali, gujarat, india (package 4: fitter trade) - ss and sc center lathe (all geared) , design, supply, installation, commissioning, testing and training of hydraulic / electro-hydraulic/ analysis and control of hydraulics. , design, supply, installation, commissioning, testing and training of pneumatic / electro-pneumatic/ analysis and control of pneumatic. , design, supply, installation, commissioning, testing and training of advance factory automation training kits , application learning systems , hydraulic power saw machine , cnc turn centre , universal milling machine with minimum specification , vertical milling machine , cnc machining centre , cnc milling tools to suit above machine (sl. no. 187): to accommodate face cutter, shell end mill cutter, taper shank and parallel shank drills/cutters, reamers. taps with suitable tool holders. , surface grinding machine , universal tool and cutter grinding machine , interchangeable ratchet socket set , hand reamer adjustable cover , hand reamer taper , reamer parallel , set combination , micrometer (0-25) , micrometer (25-50) , micrometer (50-75) , micrometer inside (0-25) , vernier calliper (150mm) , vernier height gauges , vernier bevel protractor , drill twist taper shank , drill chuck , wheel dresser , machine vice (4 inch) , machine vice (6 inch) , sleeve drill morse , bench vice , leg vice , dial test indicator , lathe tools hss tipped set , lathe tools bit hss , counter boring and counter sinking tool , arm strong type bit holder rh , arm strong type bit holder lh , arm strong type bit holder straight , straight edge , surface plate , marking table , universal scribing block , v- block pair , square adjustable , angle plate , spirit level , portable hand drill (electric) , twist drill straight shank , twist drill straight shank , taps and dies complete set , taps and dies complete set , taps and dies complete set in box , pipe wrench , pipe wrench , pipe vice , adjustable pipe tap set bsp with die set cover pipe size , wheel dresser(1for4units) , machine vice , machine vice , sleeve drill (morse taper) , bench vice , leg vice , gauge slip as johnson metric set , carbide wear block , gauge snaps , gauge plug single ended , gauge telescopic , dial vernier caliper , vernier micrometer , depth micrometer , vernier caliper , comparators stand with dial indicator , surface roughness comparison plates , digital vernier caliper , digital outside micrometer , digital dial test indicator , hardness tester , flat tongs , round tongs , straight snips , bend snips , solder bit /soldering iron hatchet type , anvil , swage block , trammel , hand groover , portable forge with hand blower , gas cutting torch with different noses , arc welding table with positioner , gas welding table with fire bricks , grinding attachment for lathe , dial test indicator , sine bar , sine bar , micron suitable to measure minimum 300mm distance. (optional) , surface roughness tester , air conditioner , drilling machine pillar type with drill chuck & key. , pedestal grinder double end type. , power saw machine stroke length160 mm , fly press 4t capacity , arc welding transformer-single phase,200 amps. (with cable, electrode holder and all other accessories) , oxy-acetylene gas welding plant with all accessories , tig welding machine , co-ordinate measuring machine having accuracy of 5 , workbench , special tools and equipment , tool holder to suit the cnc machine (sl. no. 183) for turning, threading (external &internal), grooving (external &internal), parting off operations, drilling, boring, undercutting (with 20 inserts for each operation) , worktable to mount small machines , worktable to mount small machines , worktable to mount small machines , work benches with bench vices , dg set (power backup) , engineering drawing trainees tool kit , air conditioning for classroom , air conditio

CTN :40889166

21 Jul, 2025 NA

Murshidabad - West Bengal

Tender For supply, installation and commissioning of devices, machineries, equipment and tools, etc. in laboratories and workshop of electrical engineering department of jangipur government polytechnic

State Government

CTN :40836380

04 Aug, 2025 109.43 Crore

Hyderabad - Telangana

Tender For design, engineering, manufacture, supply, assembly, testing at manufacturers works, inspection, packing for inland freight, forwarding, transit insurance, delivery for site, erection, supervision, testing and commissioning of new conveying system for diversion of raw coal including modification works in the existing crusher house and construction of space frame structure raw coal storage shed with all accessories, mandatory spares, tools and tackles including all mechanical, electrical, cni, civil, structural works, dust suppression, dust extraction and fire fighting system at btps(4x270mw) project.

State Government

CTN :40695731

18 Jul, 2025 9.55 Crore

Thiruvananthapuram - Kerala

Tender For design, engineering, manufacturing, testing & supply, modeling using computer program, feild training on ers and software training in modeling/analysis using computer program of two sets 220kv emergency restoration system (ers) system each having four towers (total eight numbers of towers) with two numbers of suspension and two numbers of tension with all acccessories & tools required for its complete functioning as per the specifications in the tender documents and standards as per the boq as the part-3 of technical specification in the tender document but not limited to boq such that any component which requires for successful usage of the equipment. generally the ers shall include high strength aluminum coloums/monopoles, foundation base assemblies, gimbal joint assemblies/articulation, box section assemblies/ suitable solution, polymer station post insulators with 220kv corona ring, polymer suspension insulators with 220kv corona ring, guy assemblies, anchor assemblies, gin pole, tirfor grips, rachets, anchor installation tools, all other essential tools and mandatory accessories for the successful erection of ers. the ers shall be suitable for 110kv & 66kv without any alterations.

Central Government/Public Sector

CTN :40621211

30 Jul, 2025 NA

Hubli - Karnataka

Tender For design, supply, construction, installation, testing and commissioning of integrated rolling stock coaching depot at hubballi including all civil, electrical general, electrical traction, signalling & telecom works and machinery, tools & plants on engineering, procurement and construction ("epc") basis.

Concrete Mixer Machine Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector