Latest concrete pipes Tenders | Government concrete pipes Tenders

CTN :40348883

29 May, 2025 NA

Ganganagar - Rajasthan

Tender For corrigendum : supply of precast concrete pipes (with and without reinforcement) (v2) as per is 458 (q2)

CTN :40447681

30 May, 2025 4.72 Lacs

Multi City - Karnataka

Tender For supply of materials and machinery for construction of hitech toilet at government high school tavanshi villege of athani taluka - atn-1 granite/trap broken metal 100 mm and down size, atn2 coarse sand (zone iii), atn3 broken stone aggregate 40 mm size, atn4 broken stone aggregate 20 mm size, atn5 broken stone aggregate 12 mm to 10 mm size, atn6 portland cement, atn7 mixer (concrete) - 1 cum capacity, atn13 rubble stones, atn14 bond stone 20 x 20 x 45 cm, atn15 mixer (concrete small used in culvert), atn22 burnt bricks class 35 (non modular), atn10 tmt bars fe 500, atn11 binding wire, atn28 providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for roof slab, atn24 providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for columns, atn34 providing and fixing special make glazed vitrified tiles (granomite finish) of approvedmake, quality and colour of size 600x600x10mm thick fixed on existing flooring with a special adhesivefor flooring and skirting and jointed with neat cement slurry mixed with pigment to match the shade oftiles., including providing spacers at required interval and removing stains etc.,cost ofmaterials,mortar,labour etc., complete as per specifications., atn31 providing and fixing m.s.grill work for windows and ventilators weighing 21kg/sqm usingm.s. flats, or m.s. square rods, or combination of m.s. flats and square rods as per approved design,drawing including cutting steel sections and welding the same to required pattern with a coat of red leadprimer, cost of materials, fixtures, labour and hom of machinery complete as per specifications, atn36 providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on10mm thick cement plaster, atn38 providing and applying painting in two coats with plastic emulsion paint ofapproved brand on wall surface to give an even approved shade after throughly brushing the surface,free from mortar drops and other foreign matter including preparing the surface even and sand papersmooth, cost of materials, labour, complete as per specifications., atn39 providing and finishing external walls in two coats with waterproof cement paint ofapproved brand and shade to give an even shade after throughly brooming the surface to remove all dirtand loose powdered material, free from mortar drops and other foreign matter cost of materials, labour,complete as per specifications., atn40 providing and fixing white vitreous china clay, water closet orissa pattern of size 580 x440mm with integral type footrests, 100mm s or p trap, 10 litre low level, p.v.c flushing cistern ( all areapproved make ) with fittings, c.i / m.s brackets, 32mm diameter flush pipe fittings and clamps, overflowarrangements with special and 25mm mosquito proof coupling of approved design, painting of fittingsand brackets, cutting and making good the wall and floor wherever including cost of material, atn41 providing and fixing white vitreous china clay, flat back wash basin size 550x400mmwith a pair of 15mm c.p brass pillar taps with c.i / m.s brackets, 32 mm c.p. brass waste of standardpattern, painting of fittings and brackets, cutting and making good the wall and floor wherever required,including cost of materials, labour complete as per specifications., atn42 providing and fixing white vitreous china clay, wall corner type, lipped front urinal basinof size 340x410x265mm with 5 litres p.v.c automatic flushing cistern, c.i / m.s brackets, standard flushpipe and c.p. brass spreaders with brass unions and g.i. clamps complete painting of fittings andbrackets, cutting and making good the wall and floor wherever required, including cost of materials,labour complete as per specifications., atn44 providing and installing at site of work p.v.c. pipes including cost of pipes andspecials and labour, including lowering into trenches, laying true to line, level and perfect linking at jointsleak proof including jointing of approved t

CTN :40418443

28 May, 2025 11.82 Lacs

Multi City - Karnataka

Tender For supply of matrials to constraction katageri nrlm shed - broken stone aggregate 40 mm size (kat01), broken stone aggregate 20 mm size (kat01), broken stone aggregate 12 mm to 10 mm size(kat01), coarse sand (zone iii) (kat01), portland cement (kat01), mixer (concrete) - 1 cum capacity (kat01), add watering charges at 1 percentage on material (kat01), add sundries charges at 1 percentage on material (kat01), transportation/loading and unloading of material/lifting of material /wastage/unforeseen charges/miscellaneous which are necessary during execution. (kat01), granite/trap broken metal 100 mm and down size (kat01), plasticizer / super plasticizer (kat01), hom of vibrator 0.71 days (kat01), tmt bars fe 500 (kat01), binding wire (kat01), size stone 20 x 20 x 25 cms (kat01), bond stone 20 x 20 x 45 cm (kat01), boulders (kat01), mixer (concrete small used in culvert) (kat01), mason class i (with tools) (kat01), mason class ii (with tools) (kat01), stone chistler class ii (kat01), add sundries charges at 1 percentage on labour (kat01), add watering charges at 1 percentage on labour (kat01), silver oak or equivalent planks 38 mm thick (kat01), casurina poles 100 - 150 mm (kat01), add handling , loading and unloading at 2 percentage on material (kat01), add sundries charges at 2 percentage on material (kat01), casurina poles 75 - 100 mm dia (kat01), jungle wood runners and planks (kat01), solid concrete blocks (40 x 15 x 20 cms)-4.00 n/sqmm (kat01), add handling , loading and unloading at 1 percentage on material (kat01), solid concrete blocks (40x10x20 cms)-4.00 n/sqmm (kat01), add providing and removing scaffolding at 3 percentage on labour (kat01), vitrified tiles 600x600 mm (kat01), mathi/nandi wood planks for panels 25 mm thick (kat01), add cutting and other wastage 5 percentage (kat01), hom of machinaries for planing (kat01), mathi/nandi wood scantling (kat01), unit cost as per the specification (kat01), m.s rods (kat01), ms flat (kat01), fitter class i (kat01), welder grade i (kat01), add hom of welding and grinding machine at 4 percentage on material (kat01), ready mix primer paint (ready mix red lead paint) (kat01), add wire brush, fine steel wool, putty, sand paper, at 3 percentage on cost of paint (kat01), painter class i (kat01), enamel metal paint (kat01), add brush at 1 percentage on cost of paint (kat01), ceramic tiles 30 x 30 cms (kat01), white cement (kat01), plastic emulsion paint (kat01), add brush, putty, sand paper, roller at 5 percentage on cost of paint (kat01), water proofing cement paint (kat01), add brush, putty, sand paper at 2percentage on cost of paint (kat01), liquid wood filler (kat01), add brush, putty, sand paper at 5 percentage on cost of paint (kat01), enamel paint (kat01), polyenthylene water storage tank of specified capacity l (kat01), labour charges for lifting and placing in position and making connection at 7 percentage on material (kat01), handling loading and unloading 3 percentage on material (kat01), indian type water closet of size 580 mm of specified make with footrests (kat01), a 100mm s or p trap (kat01), add white lead paint, gasket, cement, sand for making good the wall and floor at 2 percentage on material (kat01), add cement sand and grit 1 percentage on material (kat01), licenced plumber with tools (kat01), add 5 percentage for fittings and wastage charges (kat01), polythylene pipes high density 25mm external dia (kat01), cost of 6.5mm m.s. coil (kat01), fabrication charges. (kat01), labour charges for handing errection of rcc rings etc. at 5 percentage (kat01), transportation charges of materials beyond 5 km at 10 percentage (kat01), rcc cap 1000 mm dia, 100 mm thick (kat01), pvc pipe of 10kg/cum,90 mm (kat01)

CTN :40420910

27 May, 2025 34.60 Lacs

Kanpur - Uttar Pradesh

Tender For 3. s/i of 06 nos open gym in distt kanpur dehat - elliptical machine dimension 1200x900x450mm, combined climber/chinup bar two peopler dimension 22, rowing machine dimension 1280x800x1150mm, arm shoulder wheel dimension 600x300x1500mm, steppertwister dimension 1200x750x360mm, parallel bar dimension 2000x600x1200mm, dual ab board dimension 1500x1500x1200mm, two people sitting pushing and pulling exerciserdimensions 1800x900x1500mm, frieght of equipment - 5%, installation of gym equipment, supply and fixing of sign board, photography charge, earth filling, earth work excavation in trench for foundation ,pipes ,cable etc in ordinary soil(loan clay or sand) including upto1.5 m lead upto 50 m dressing of side and ramming of bottom and disposal of surplus excavated earth as directed by the engineer -in -charge with a lead 50m .ref to dsr/pwd spec.2.6(2.6.1), providing and laying in cement concrete 1:6:12(1cement:6 coarse sand:12 graded brick ballast 40 mm nominal size) and form work,curing complete as per technical specificatation .ref to dsr/pwd sch273, m-150 class brick work in foundationand plinth in1:4 cement and coarse sand mortar with all complete upto the plinth including supply of all matrials , labour ,t &p etc required for proper completion of work..ref to dsr/pwdspec-6.1.1, 12 mm thick plaster singel coat on fair side of 1:4 one cement and four coarse sand complketeitem.ref to dsr/pwd spec-13.4.1, providing and laying of 60 mm thick interlocking tiles completeitem,mord-1500(6.7)(2)

CTN :40420915

27 May, 2025 5.77 Lacs

Kanpur - Uttar Pradesh

Tender For 1. s/i of open gym in distt kanpur dehat - elliptical machine dimension 1200x900x450mm, combined climber/chinup bar two peopler dimension 22, rowing machine dimension 1280x800x1150mm, arm shoulder wheel dimension 600x300x1500mm, steppertwister dimension 1200x750x360mm, parallel bar dimension 2000x600x1200mm, dual ab board dimension 1500x1500x1200mm, two people sitting pushing and pulling exerciserdimensions 1800x900x1500mm, frieght of equipment - 5%, installation of gym equipment, supply and fixing of sign board, photography charge, cleaning of and uprooting of rank vegitation grass etc completeitem.sch no-259, earth filling, earth work excavation in trench for foundation ,pipes ,cable etc in ordinary soil(loan clay or sand) including upto1.5 m lead upto 50 m dressing of side and ramming of bottom and disposal of surplus excavated earth as directed by the engineer -in -charge with a lead 50m .ref to dsr/pwd spec.2.6(2.6.1), providing and laying in cement concrete 1:6:12(1cement:6 coarse sand:12 graded brick ballast 40 mm nominal size) and form work,curing complete as per technical specificatation .ref to dsr/pwd sch273, m-150 class brick work in foundationand plinth in1:4 cement and coarse sand mortar with all complete upto the plinth including supply of all matrials , labour ,t &p etc required for proper completion of work..ref to dsr/pwdspec-6.1.1, 12 mm thick plaster singel coat on fair side of 1:4 one cement and four coarse sand complketeitem.ref to dsr/pwd spec-13.4.1, providing and laying of 60 mm thick interlocking tiles completeitem,mord-1500(6.7)(2)

CTN :40420916

27 May, 2025 11.53 Lacs

Kanpur - Uttar Pradesh

Tender For 2. s/i of 02 nos open gym in distt kanpur dehat - elliptical machine dimension 1200x900x450mm, combined climber/chinup bar two peopler dimension 22, rowing machine dimension 1280x800x1150mm, arm shoulder wheel dimension 600x300x1500mm, steppertwister dimension 1200x750x360mm, parallel bar dimension 2000x600x1200mm, dual ab board dimension 1500x1500x1200mm, two people sitting pushing and pulling exerciserdimensions 1800x900x1500mm, frieght of equipment - 5%, installation of gym equipment, supply and fixing of sign board, photography charge, cleaning of and uprooting of rank vegitation grass etc completeitem.sch no-259, earth filling, earth work excavation in trench for foundation ,pipes ,cable etc in ordinary soil(loan clay or sand) including upto1.5 m lead upto 50 m dressing of side and ramming of bottom and disposal of surplus excavated earth as directed by the engineer -in -charge with a lead 50m .ref to dsr/pwd spec.2.6(2.6.1), providing and laying in cement concrete 1:6:12(1cement:6 coarse sand:12 graded brick ballast 40 mm nominal size) and form work,curing complete as per technical specificatation .ref to dsr/pwd sch273, m-150 class brick work in foundationand plinth in1:4 cement and coarse sand mortar with all complete upto the plinth including supply of all matrials , labour ,t &p etc required for proper completion of work..ref to dsr/pwdspec-6.1.1, 12 mm thick plaster singel coat on fair side of 1:4 one cement and four coarse sand complketeitem.ref to dsr/pwd spec-13.4.1, providing and laying of 60 mm thick interlocking tiles completeitem,mord-1500(6.7)(2)

Corporations And Associations And Others

CTN :40351350

27 May, 2025 1.56 Crore

Delhi - Delhi

Tender For supply and installation of open gym equipments under mlalads funds for various locations of parks in municipal corporation of delhi - supply & installation of open gym equipments under mlalads funds for various locations of parks in municipal corporation of delhi, seated puller /pull chair made from c class g.i pipe. dimensions: - 1900mm (length) x 740mm (width) x 1920mm. (height). safe area:- 1.2mtr x 3mtr. seated puller equipment made up of c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the center pipe is of 100nb made from c class g.i. pipe. bottom support is of m.s. round plate of dia 250 mm & 10mm thickness welded. all linkages are made up of 25nb c class g.i. pipe. the handle frame is of 32nb c class g.i. pipe. the seat frame is of 32nb c class g.i. pipe. to build structure bushes are used which are made from seamless pipe of 60mm o.d. and 5mm thickness as well as 60mm diameter solid bar bush used. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class. welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. foundation cover closing cap is made from injection moulded plastic lldpe / hdpe. the seats and back rests are fitted on the outer frames are made up of m.s. sheet of size 330 mm x 300 mmx2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.closing caps are made up of from injection moulded plastic lldpe / hdpe.pins used of diameter 25mm and 17mm are made up from sae 8620 bright material. the bearings used are of 6205 2rs1 and 6203 2rs1 permanent lubricated sealed bearing of reputed brand.high tensile steel with galvanized nuts & bolts are used for assembly.thecirclips used for assembly are of a16. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using exonobel / berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size), cross trainer /elliptical exerciserdimensions: - 1320mm (length) x 600mm (width) x 1750mm. (height). safe area: - 1.77 x 1.2mtr. cross trainer equipment made from c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the main frame pipes are of 80nb c class g.i. pipe with single bend pipe with 250mm radius. the bottom support of m.s. round plate of dia 250 mm & 10mm thick. the handle frame is made up of 25nb c class g.i. pipe. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. to build structure bushes are used which are made from m.s. seamless pipe of 60mm od with 5 mm thickness. the footrests are made from injection moulded plastic lldpe / hdpe. closing caps are made up of injection moulded plastic lldpe / hdpe. pins used of diameter 35mm, 25mm, and 17mm are made up from sae 8620 bright .the bearings used are of 6007 2rs1 62052rs1 and 62032rs1 permanent lubricated sealed bearing of reputed brand. high tensile steel with galvanized nuts and bolts are used for assembly. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using exonobel / berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse

CTN :40387773

09 Jun, 2025 NA

Nainital - Uttarakhand

Tender For construction of tin shed - colour coated cgi sheets , standing square poles , perling structure pipes , rafter structure pipes , paint work , hand standing concrete

CTN :40423792

10 Jun, 2025 NA

Tawang - Arunachal Pradesh

Tender For supply and construction of force preservation bkr as all specified in technical specification under job no 2788 - construction materials.supply and fixing of hume pipe 6 ft dia x 8 ft length x 1800mm / 6 inch thickness (rly gde np4) isi marked with the fwg specifications all as specified and directed.technical specifications : -(a) governing specifications : generally governing to is 458 (latest)(b) classification of pipes : reinforced concrete pipes(c) ends of the pipe : internal flush joints(d) class : (rly gde np4) reinforced concrete pipes(e) internal diameter of pipe : 1800 mm (f) effective length of each pipe 2.50 mtr (8 ft), cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112 - 1989 (make:-birla gold/ambuja /ultratech /acc/jk/dalmiya or equivalent), coarse sand free from vegetation, coarse agg 20mm, pbs roll (20m long, width of 0.9mtr) (isi marked) with min weight of 34 kgs/roll, pvc pipe 110 mm dia each 3 mtr length (make : prince/finolex/supreme), hdpe water proof cover 15x15, make shalimar, sunking pico plus light 50 lumens(a) led 1 white led with cover 50 lumens per weight with over 50 lumens per watt, plywood 4 x 8 x 12mm (termite resistant & bwr) confirming to is 1328-1996 (make : supreme/assam/green ply/kit ply/isi mark), aac blocks of size 600x200x150mm(make:brikolite/ncl/nucon or equivalent), gi binding wire (tata / sail / jsw or equivalent), wooden scantling of size 50mm x 40 mm, nails various sizes, labour cost on construction materials, construction mtrl for breast wall.cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112 - 1989 (make:-birla gold/ambuja /ultratech /acc/jk/dalmiya or equivalent), coarse sand free from vegetation, coarse aggregate 40 mm graded, stone boulder 9" to 12", pvc pipe 75 mm dia and 3 mtr length, labour cost on construction materials for breast wall

Central Government/Public Sector

CTN :40292189

26 May, 2025 3.17 Lacs

Sundergarh - Odisha

Tender For corrigendum : supply of precast concrete pipes (with and without reinforcement) (v2) as per is 458 (q2)

Concrete Pipes Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations And Associations And Others

Central Government/Public Sector