Tender For repairing / rebuilding of worn out and broken lower portion of blade for fitting cutting edges and end bits and extra plate welding on blade of dozer model bd-155, sl. no. 13592 of jarangdih colliery.
Tender For corrigendum : periodical services(internal) including repairs to flooring,sanitary and plumbing items works in otm and md accn at ridge, raulki area under age b/r-i of ge satwari - notes : (1) work will be carried out upto 4th storey of bldgs and quoted rates of items shall be deemed to include the cost of necessary formwok and scaffolding required as per site conditions., taking down shutters of any description exc 1.00 sqm and not exc 2.00 sqm each and removing from the site complete all as specified & directed., taking down chowkats or frames with shutter (without taking off shutter from the frame) n. exc 1.5 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed., taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.5 sqm & n. exc 4 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed., demolition of cement concrete (un-reinforced) in ground floor to 4th floor and pavings n exc 15 cm thickness (below or above ground level ) and removing the rubbish from the work site to out side defence premises complete all as specified and directed., demolition of concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed., taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubing down with water etc and removing unserviceable material outside defence land complete all as specified and directed., dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed, s&f pressed steel frames of size 125mm x 60 mm made out of size 1.25 mm thick ms sheet for doors with one or more rebates including mild steel hinges, 100 mm long , medium weright and 25 mm x 3 mm flat iron as in hold fast , tie bar including necessary fixing lugs, lock strike plate and fixing arrangement and making good the disturbed surfaces in cement mortar 1:3 or cement concete 1:2:4 type b-1 including pcc 1:3:6 type c1 as in back fill to chowkats complete all as specified and directed., s&f pressed steel frames of size 105mm x 60 mm made out of size 1.25 mm thick ms sheet for doors with one or more rebates including mild steel hinges, 100 mm long , medium weright and 25 mm x 3 mm flat iron as in hold fast , tie bar including necessary fixing lugs, lock strike plate and fixing arrangement and making good the disturbed surfaces in cement mortar 1:3 or cement concete 1:2:4 type b-1 including pcc 1:3:6 type c1 as in back fill to chowkats complete all as specified and directed., s&f 35 mm thick factory made 2nd class hard wood, plain, framed, panelled shutters (two panels) with lock rail and panel of 9mm thick bwp commercial plywood .the size of rail and stiles as per is: 1003(part-1), kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified and directed., s&f factory made 35 mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in ssr part i, section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed, m&l for 30mm thick factory made flush shutters, solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed., s&f in repair solid pvc door frame of size 50mm x47mm made out of 5mm plain colour pvc sheet reinforced with mild steel square tube, supplying and fixing in opening
Tender For cutting of 4 edges of card of sizes 58 x 76 cm and 58 x 86 cm 200 gsm (cutting before printing) rate required for 1000 sheets, on contract basis
Tender For supply of lh steel boring bar shank dia 16mm, oal-200mm max entering dia 18mm iscar code-e16r swlnl-04 or equiv , double sided 6-cutting edges turning insert for super finishing application with r0.2mm iscar code-w
Tender For supply of materials and supplies - erichs dental arch bars -1 per packet (stainless steel erichs type with smooth edges), stainless steel ductile wires -1 per packet (stainless steel ductile wires 26 guage, soft and ductlle for dental wiring), tungsten carbide burs -straight no. 702 -1 per packet(tungsten carbide burs - for straight dental hand piece for bone surgery), tungsten carbide burs - straight no. 703 -1 per packet(tungsten carbide burs - for straight dental hand piece for bone surgery), tungsten carbide burs - straight no. 557 -1 per packet(tungsten carbide burs - for straight dental hand piece for bone surgery), tungsten carbide burs - straight no. 558 -1 per packet(tungsten carbide burs - for straight dental hand piece for bone surgery), tungsten carbide burs - straight no. 701 -1 per packet (tungsten carbide burs - for straight dental hand piece for bone surgery), titanium mini bone plates-pack of 10 plates (2 mm 4 holes with gap), titanium mini bone plates-pack of 10 plates (2 mm 2 holes with gap), titanium mini bone plates-pack of 10 plates (2 mm 6 holes with gap), titanium mini bone plates-pack of 10 plates (1.5 mm 4 holes with gap), titanium mini bone plates-pack of 10 plates (1.5 mm 2 holes with gap), titanium mini bone plates -1 per pack (2 mmcontinuous 16 holes), titanium mini bone plates -1 per pack (1.5 mmcontinuous 12 holes), titaniun self drilling screws -10 per pack (2 mm dia., 8mm long), titaniun self drilling screws -10 per pack (1.5 mm dia., 8mm long), iodoform powder, medical grade 1 per pack (20 mg bottles), lag screws 10 per pack,5 packs (22 mm long, 2mm dia.), drill bits long for lag screws -1 per pack(2 mm dia. straight hand piece, 50 mm long with tc cutting, 20 mm tip), bone wax -1 per pack(packets), lubricating spray -1 per pack (for micromotor hand piece), mucoperiosteal elevator -1 per pack(molt type, long), stainless steel ductile wires -1 per pack (stainless steel ductile wires 28 guage, soft and ductlle for dental wiring), stainless steel ductile wires -1 per pack (stainless steel ductile wires 30 guage, soft and ductlle for dental wiring), b. p. handle no. 3 -1 per pack(stainless steel), titaniun condyle recon plates 2.5 mm system -1 per pack (rt cndyle with 20 holes 2.5 mm dia.), titaniun condyle recon plates 2.5 mm system -1 per pack (lt cndyle with 20 holes 2.5 mm dia.), titaniun condyle recon plates 2.5 mm system -1 per pack (20 hole sraight, 2.5 mm dia, titanium screws 2.5 mm diam., cross slot -10 per pack (2.5 mm diam., 10 mm long, cross slot), dental mouth mirror- 1 per pack (mirror with handle, autoclavable), dental probe -1 per pack (single ended), suction tip metallic -1 per pack(2 mm diam suction tip metallic, autoclavable)
Tender For repairing and replacement of under carriage , repairing/ rebuilding of worn out and broken lower portion of blade for fitting cutting edges and end bits and extra plate welding on blade and denting and painting of dozer model- bd- 355, sl. no.g-115
Tender For corrigendum : cleaning cutting of grass wild vegetation from area of runway scraping both side of runway edges 3.00m from runway edges certain miscellaneous work at icgas ratnagiri