Latest connecting pin Tenders | Government connecting pin Tenders

Central Government And Public Sector

CTN :39396554

12 Mar, 2025 NA

Jalpaiguri - West Bengal

Tender For supply of door hinge foot with pin and washer for boxnr wagon rdso drg no: wd-09081-s- 01,it em- 12,11 & 3, alt-nil mat.spec: as per drawing [ warranty period: 30 months after the date of deliv ery ]

CTN :39385418

10 Mar, 2025 NA

Pune - Maharashtra

Tender For tender for supply of lv2 icvs 3020-002098 765-78-1369 pulley , lv2 icvs 5330009176 765-10-1380 gasket , lv2 icvs 4710003353 765-78-sb536 pipe assembly , lv2 icvs 5310253804 674605 b-k washer , flat , lv2 icvs 5365010123 gost13942-80 ring retaining ring b-22 , lv2 icvs 2940001064 765-78-sb438 gauze , lv2 icvs 5365186904 672-54-6-10 band , lv2 icvs 5305-72-016-1762 gost17473-80 screw m4.8h6hx14.48.016 , lv2 icvs 4720002835 40u12-1.3 13 hose ty005-6016-80 , lv2 icvs 5310255029 m240-26-073-a nut , lv2 icvs 5340-017094 765-17-452 hinge holder , lv2 icvs 5340-72-048-2762 765-50-1472 stopper , lv2 icvs ak-150b-050 oh-39 gasket , lv2 icvs gost-9650-80 12x45x2.4.32.9 axle 6-8b-12x45x2.4.32.9 micron , lv2 icvs 5315-028912 765-93-sb222 pin straight headed , lv2 icvs 5315-052397 675-57-311 pin straight , headed , lv2 icvs 5340-135340 765-50-1968 hinge special , lv2 icvs 678-94-sb5 belt , lv2 icvs 5340-153978 765-58-183 strap retaining , lv2 icvs gost 5496-78 pipe 3s10.0x1.3

Central Government/Public Sector

CTN :39038554

24 Feb, 2025 NA

Nashik - Maharashtra

Tender For corrigendum : supply of osaero job work for manufacturing of 54 parts as a package ref semfg533 - cross piece of front suspension uni, front pin, rear pin, cross piece rear suspension unit, rear unit, front unit, front pivot, rear pivot housing, rear pivot, rh door, insert, trailing edge, diaphragm., front pin, rear pin, front hinge, rear hinge, trailing nose, front pin, rear pin, diaphragm, front hinge, rear hinge, diaphragm, diaphragm, nose, nose, cross piece of front, suspension uni, front pin, rear pin, cross piece rear, suspension unit, rear unit, front unit, front pivot, rear pivot housing, rear pivot, rh door, insert, trailing edge, diaphragm, front pin, rear pin, front hinge, rear hinge, trailing nose, front pin, rear pin, diaphragm, front hinge, rear hinge, diaphragm, diaphragm, nose, nose

Central Government/Public Sector

CTN :39297848

21 Feb, 2025 NA

Malanjahknd - Madhya Pradesh

Tender For supply of 328200078 crank shaft pt no 8 c no n 3808 99 , 328200079 connecting pin pt no 10 c no n 3810 99 , 328200080 piston pin pt no 13 c no n 3813 99 , 328200081 piston pt no 14 c no n 3814 99 , 328200082 cylinder block pt no 50 c no n 3850 99 , 328200083 stuffing box pt no 54 c no n 3854 99 , 328200084 suction header pt no 69 c no n 3869 99 , 328200085 discharge header pt no 74 c no n 3874 99 , 328200086 ptfe bush pt no 93 c no n 3893 99 , 328200087 main body pt no 01 c no n 380 99

CTN :39321133

05 Mar, 2025 11.81 Lacs

Jalgaon - Maharashtra

Tender For supply of assembled hinge with hinge pin and plate for hinge for steel box h2a as per drg. no. ofbh/c/2265

CTN :39267212

01 Mar, 2025 NA

Bardhaman - West Bengal

Tender For supply of staple type belt fastener's hinge pin for type 6 pvcbelting.

corporations/Associations/Others

CTN :39254228

28 Feb, 2025 NA

Barsingsar - Rajasthan

Tender For supply of lignite extraction feeder spares - ss scraper fixing bolt, washer and nut , chain link with stub , chain link without stub , connecting pin , circlip

Central Government/Public Sector

CTN :39244956

26 Feb, 2025 NA

Ajmer - Rajasthan

Tender For supply of pin for hinge 20 x 99 (ss) for boxnr/boxnhl wagon to rdso drg. no. wd-09081-s-01 alt. nil, item no. 11. matl. & spec. as per drg. [ warranty period: 30 months after the date of deliver y ]

CTN :39237511

27 Feb, 2025 NA

Jodhpur - Rajasthan

Tender For supply of preservation oblique maint oblique repair of transom assy front 60 nos , s and f of special solid wheel as per cat part no impd 1047 oblique a , s and f of shaft i shouldered , s and f washer spring single coil type b as per cat part no is 3063 , s and f of nut g1 oblique 5310 000551 , s and f of pin quick release ms 16 dia x 138 long as per g1 oblique 5340 004528 , oil oblic greasing of bracket i hinge ms 280x95x93 lh frame , oil oblic greasing of bracket i hinge ms 280x95x93 rh frame

CTN :39236778

27 Feb, 2025 NA

East Khasi Hills - Meghalaya

Tender For tender for supply of taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each complete , material and labour powder coated anodised aluminium frame for doors , windows , ventilators with one or more rebates including joining cleat for fixing etc complete all as specified , material and labour powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors , windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of epdm rubber/neoprene gasket required (fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is 733 and is 1285 , fixing with dash fasteners of required dia and size , including necessary filling up the gaps at junctions , i.e at top , bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth , rust free , straight , mitred and jointed mechanically wherever required including cleat angle , aluminium snap beading for glazing/ paneling , c.p. brass/ stainless steel screws all complete as per architectural drawings and the directions of engineer in charge. , supply and fix 4.8mm thick sheet glass , ordinary quality and glazing with oil putty in square but n. exc 0.5 sq. m in each pane , supply and fix for metallic aluminium sliding window shutter lock of size 100mm , push to unlock type , concealed handel-cum-latch lock type , completed all as specified and directed , supply and fix anodised aluminium grill (anodised transparent or dyed to required shade according to is 1868 with minimum anodic coating of grade ac 15) of approved design/pattern , with approved standard section and fixed to the existing window frame with c.p. brass/ stainless steel screws at the rate of 200 mm centre to centre , including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening , all complete as per requirement and direction of engineer in charge. , dismantling fillets , rails , posts , rafters , purlins , etc. under 40 sq. cm in section unframed work , dismantling boarding , any description , fixed in any position with nails , material and labour for clean sawn second class hard-wood in scantlings timber fixed , supply and fix 12mm thick block boards , grade 2 quality , interior grade , decorative type with decorative face veneer on both face , fixed with screws to timber frame-work. , supply and fix 30mm width of flaps of continuous (piano) hinges , mild steel , bright finish or electrogalvanised , supply and fix 75mm size brass handles , cast type , polished bright , supply and fix 100mm hasp and staple , safety type , aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws , taking down chowkhats or frames (without taking off shutters from the frames) 1.5 sqm and n exc 4 sqm , supply and fix 2nd class hardwood plain , solid , straight chowkats and frames , wrought , framed rebated on the solid , rounded or chamfered , put together with glue pinned at joints , supplied and fixed size 100x60mm , supply and fix 30mm thick flush shutters , solid core construction , with block board core and plywood face panels , commercial type on both sides both face is covered with deco rative face veneer with lipping/frame to match , supply and fix of 125 mm long mild steel butt hinges , medium weight cold rolled complete all as specified and directed. , supply and fix 150mm aluminium handles , cast type , anodised , supply and fix of 200mm long aluminium alloy , anodised , sliding door bolt with hasp , staple (bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed , supply and fix of 200 mm long

Connecting Pin Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector