Get complete information related to latest Contact Tip Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Contact Tip Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Contact Tip Tenders.
Tender For supply of all electrical materials at north zone (katargam) light department in surat municipal corporation.-, tube light and accessories, 4 ft. (1200 mm) tube fitting including 36/40 watt electronic ballast without tube rod only fixture, 4 ft. (1200 mm) tube light rod, light output 2450 lumens., 4 ft. 18/20 watt led complete pvc t5 tube light lumen output 2000/2100, luminary efficiency 100lm/watt, 2 ft. 08/10 watt t5 led complete pvc tube light lumen output 800/1000,, 4 ft. 18/20 watt led complete aluminum body t5 tube light lumen output 2000/2100, luminary efficiency 100lm/watt, 2 ft. 08/10 watt t5 led complete aluminum body tube light lumen output 800/1000,, 4 ft. (1200 mm) tube fitting without led tube rod only fixture with rotating type side holder, 4 ft. led t5 tube light rod, glass type 18/20 watt lumen out 2100, 1200 mm luminary efficiacy 100lm/watt, 36 watt electronic ballast (choke), tube light side holder simple, led tube light side holder (rotating type), lamp & halogen tube, 40w tungsten filament lamp, 60w tungsten filament lamp, 100w tungsten filament lamp, 7 w led lamp, 9 w led lamp, 12 w led lamp, light & accessories, 2 * 2 feet square 36/40 (watt) led fixture for indoor lighting or its equivalent, 2 * 2 feet square 36/40 (watt) led fixture driver for indoor lighting or its equivalent, 18/20 watt, led panel light (square/round), 1700 lumens, 20/24 led panel light size 1 * 1 inch, 12/15w led panel light (square/round), 1020 lumens, 50-55 watt led flood light fitting having efficacy 100lm/watt, cct 5000 k to 5700k, 30-35 watt led flood light fitting having efficacy 100lm/watt, cct 5000 k to 5700k, celling fan & accessories, supply of 1200 mm sweep (48"), bee 5 star rated, ceiling fan with brush less direct current (bldc) permanent territe magnet motor, class of insulation: b, rust free 3 nos. aluminum blades, 2 nos, canopies, shackle kit with earthing provision, 22 guage copper winding, power factor not < 0.9, service value (cmm / w) minimum 6.85, air delivery minimum 215 cmm, 305 rpm, ceiling fan, (48"), 1200 mm, energy efficient, bee 1 star rated, high speed air delivery, minimum 218 cmm input power maximum 53 w, pedestal fan a.c. 230 v. 50 cy/s. 400 mm sweep oscillanting, type and adjustable height complete with guard regulator, & standard lead fleixble wires and plug top 110 watt., supplying & erecting single phase industrial pedestal fan suitable for medium duty ring mounted low noise operation suitable for medium duty having 450 mm dia size and maximum speed 1440 rpm 0.80 a,80 watt., wall fan a.c. 230 v. 50 cy/s. 400 mm sweep oscillating, type and adjustable ,height complete with guard regulator, & standard lead flexible wires and plug top, wall fan a.c. 230 v. 50 cy/s. 450 mm sweep oscillating, type and adjustable ,height complete with guard regulator, & standard lead flexible wires and plug top, supplying & erecting single phase approved make industrial wall fan suitable for medium duty ring mounted low noise operation suitable for medium duty having 600 mm dia size and maximum speed 1440 rpm 0.80 a,180 watt., supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having 300 mm dia size and maximum speed 1350 rpm, supplying & erecting single phase apporved make industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having 225 mm dia size and maximum speed 1370 rpm, supplying & erecting approved make low noise decorative exhaust fan having square frame abs body with inbuilt lowers & square frame, having 150 mm with 1350 rpm, supplying & erecting approved make low noise decorative exhaust fan having square frame abs body with inbuilt lowers & square frame, having 200 mm with 1350 rpm, supplying & erecting approved make low noise decorative exhaust fan having square frame abs body with inbuilt lowers &
Tender For periodic maintenance of office building lighting and various installed electrical equipments under jhargram mechanical division, p.h.e. dte. - making suitable provision for periodic maintenance of entire internal wiring and various installed electronics equipments of the office building under jhargram mechanical division, phe dte.a) all ceiling, exhaust and wall fans at various rooms under this office and sub division.b) all light points including rooftop, compound lighting, gate light, recess mounted lights at various rooms of the office building.c) entire lt wiring of the office, drilling control room and stores.d) maintenance of all computers devices installed in the office including cpu, monitor, printer, other accessories (keyboard, mouse, removal disk etc.) lan system, software installation & updation, antivirus up date as & when required including providing service on office days consisting corrective maintenance, reparing & fitting of damaged spare (without supply) both as & when required and regular basis for at least 15 systems as above for the period.e) monthly recharge of broadband connection. f)maintenance of photocopier machine.g) maintenance of intercom installed at office as per direction. h) maintenance of all air conditioning machines.(w.e.f. 01.09.2025 to 31.08.2026)= 12 months., add gst @ 18 %, add cess @ 1 %
Tender For day to day operation and guarding of grid-ii pumping machineries and allied electrical accessories of nayagram sub-surface based w/s scheme under jhargram mechanical division, p.h.e. dte. in the district of jhargram.
Tender For supply and delivery of daily maintenance materials for various sites under lalbazar electrical section pwd - supply & delivery of 20w 4 led tube with extruded mettallic heat sink (make: crompton/ philips/ wipro), supply & delivery of 2 length 10w led single batten with in built led tube( (non-replaceable tube light). (make: crompton/ philips /wipro), supply & delivery of 250v,9w b/c (b-22) led bulb(cdl). (make: philips/crompton/havells), supply & delivery of 250v, 18w, 4 pin, pl-l led lamp.( make: havells- photon ultra 18w pl- l/crompton/ philips)., supply & delivery of 250v, 36w 2x2 square recessed type led fittings in cdl-6500k( make: philips-full glow-rc 380b-36/wipro), supply & delivery of250v,2w led spot light in cdl (cct 6500k). (make: philips-astra spot-2w/ wipro), supply & delivery of 250v, 11-18a single phase motor starter.(make:north-west/legrand), supply & delivery of 250v, 25a plug top with indicator.(make:north-west), supply & delivery of 250v, 65w,400 rpm 1200mm sweep ac ceiling fan with all accessories like fork,canopy, blades(make:usha-striker plus/orient-pspo/polar), supply & delivery of 250v, 450mm sweep full metal body ac wall bracket fan with all accessories and blades(make:epc-tempest/bajaj-supreme plus/cinni), supply & delivery of 250v, 3.15uf aluminium casing, copper terminal fan condenser. (make: universal/ tibcon / havells), supply & delivery of 250v, 2.5uf aluminium casing, copper terminal fan condenser. (make: universal/ tibcon / havells), supply & delivery of analogue daily programmable time switch. (make: legrand/l&t-j648b1), supply & delivery of digital astro mini time switch. (make: legrand/l&t-t2ddt7), supply & delivery of 250v,250w, 120 lm/w flood light with die cast aluminium housing with driver rating higher than the fittings rating. (make: philips/wipro)
Tender For corrigendum : supply and installation of ac machines and other electrical equipment for the office of wbscvt at room no. 414 of karigari bhawan, rajarhat new town, kolkata -160 - distribution wiring in 1.1 kv grade 2x22/0.3 (1.5 sqmm) single core stranded fr pvc insulated & unsheathed copper wire (brand approved by eic) partly in 20mm size pvc rigid conduit fr (precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded fr pvc insulated & unsheathed copper wire for ecc, to light/fan/call bell points with modular type switch (brand approved by eic) fixed on modular gi switch board complete with 2 no. suitable size ph & n copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only pvc rigid conduit on ceiling and remaining portion concealed] (avg run 10 mtr), distribution wiring in 1.1 kv grade 22/0.3 (1.5 sqmm) single core stranded fr pvc insulated & unsheathed copper wire (brand approved by eic) in 20mm size pvc rigid conduit fr (precision make), with 1.1 kv grade 1 x 22/0.3 (1.5 sqmm) single core stranded fr pvc insulated & unsheathed copper wire as ecc, to 6a 3 pin modular type plug socket & switch (brand approved by eic) on 4 module gi switch board with 3/4 module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building workson board, supply & fixing 240 v, 6 a, 3 pin modular type plug socket (brand approved by eic) with 6a modular type switch, without plug top on 4 module gi modular type switch board with 3 module top cover plate flushed in wall incl. s&f switch board and cover plate and makingnecy. connections with pvc cu wire and earth continuity wire etc [for laptop charging], supply & fixing 240 v, 3 nos. 16 a, 3 pin modular type plug socket with 3 nos. 16a modular type switch (brand approved by eic), 20a modular switch type sp mcb (c-curve) and indicator without plug top on 2 row 12 module gi modular type switch board with 2 row 12 module top cover plate flushed in wall incl. s&f switch board and cover plate and making necy. connections with pvc cu wire and earth continuity wire etc.[for sound system & projector], distribution wiring in 1.1 kv single core stranded frls pvc insulated & unsheathed copper wire (finolex / havells/ kei / gloster /approved by eic) in suitable size ( 40/32/25 mm ) pvc rigid conduit fr (precision make) incl. necy. fittings as required 2 x 2.5 sqmm + 1 x 1.5sqmm [for power plug ], 2 x 4 sqmm + 1 x 2.5 sqmm [for ac ], 3 x 1.5 sq mm [for 6 amp plug and other ckt], finishing of the pvc insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. as per g s 2.5 sq mm, 4.0 sq mm, supply & fixing of 250v 50 hz olp- 30a single phase a.c starter ( make -electron, / pwd appvd ) suitable for 1.5 / 2.0 tr airconditioner machine incl s & f suitable size g i box (16 swg) flushed in wall with voltage check, amp check, time check incl. making connection as per direction of eic. [for ac connection], supply & fixing 240 v, 25 a, 3 pin modular type plug socket (brand approved by eic), without plug top and switch with 2 module gi modular type switch board with top cover plate flushed in wall and making necy. connections with pvc cu wire and earth continuity wire etc as per g.s.[for ac connection], supply & fixing 240 v,25 a, 3 pin modular type plug top with indicator (brand approved by eic) & necy. connections.[for ac connection], supply & fixing of 36 w -2 x 2 recess mounted led luminaries made in crca sheet metal with a wider light window and also with an opal acrylic diffuser for a spotless and grade free uniform lighting and the fitting complete with all accessories to crompton make cat no - polaris nio - i lctlrne-36
Tender For maintenance of mi scheme under belbari rd block during the year 2025-26/sh_ - repair _ maintenance of pump-motor, suction-delivery _ electrical accessories etc. (job no. tr/34/minor works/wrd-i/2025-26) - dismentling of pump for over hauling including greasing, gland packing, necessary repairs & reinstallation of the same including trial run for 10 hrs. in two spell complete as per direction of the engineer-in-charge.i) for li, supply & fitting fixing ball bearing of approved quality for pump required during overhauling.i) 6306 ball bearing (tata /skf), providing & fitting fixing shaft sleeve bush of approved quality.i) for li (cast iron), providing & fitting fixing shaft sleeve nut of approved quality.i) cast iron (ci), providing & fitting fixing c.i. gland of approved quality.i) for li, providing & fitting fixing c.i coupling complete with nuts & bolts of approved quality.i) 150 mm dia, providing & fitting fixing coupling nuts & bolts (all size)of approved quality.i) for li, providing & fitting fixing coupling rubber bush (all size)of approved quality. i) for li, providing & fitting fixing coupling star bush (all size) of approved quality.i) 150 mm dia, providing & fitting fixing pump shaft of approved quality., supplying and fitting fixing of asbestos rope of best quality as per direciton of engineer-in-charge. i) 6mm to 8mm thick, ii) 10 to 12 mm thick, providing & fitting fixing casing ring of approved quality.i) 150 mm dia (10 mm thick), supplying and fitting fixing of pump cooling pipe of best quality as per direciton of engineer-in-charge., providing & fitting fixing lantern ring for pump of approved quality., supplying and greasing/applying of grease of approved quality as per direction of engineer-in-charge., providing and fixing g.i. bend /elbow in the pipe line including testing of joints complete as per cpwd specification and direction of the engineer - in - charge. a) 150 mm dia, providing & fitting fixing shaft sleeve nut of approved quality. (cast iron), providing & fitting fixing of g.i. flange ( 10 mm wall thickness ) by welding with g.i. / ms pipe and placing position as per specification and the direction of the engineer-in- charge.i) 150 mm dia, providing & fitting fixing gland nut / stag nut 100 mm long for gland of approved quality.i) for li, providing and fitting fixing m.s. clamp for hose pipes with nuts & bolts complete as per relevant is specification anddirection of engineer-in-charge.i) 150mm dia, providing & fitting fixing rubber flange washer 6 mm thick at site of work of approved quality.i)150 mm dia, providing and fitting fixing ms foot valve as per relevant is specification and the direction of the engineer-in-charge.. i) 150 mm dia, providing & fitting fixing c.i tail piece of approved quality at site of work.i) 150 mm dia, providing & fitting fixing foot valve leather washer (6 mm thick) of heavy duty at site of work of approved quality.i) 150 mm dia, providing & fitting fixing c.i foot valve spare parts of 125/150 mm dia at site of work of approved quality.a) c.i foot valve weight, b) c.i foot valve ring, c) c.i foot valve net, dismantling of motor fpr vernishing heating etc cpmplete in/c reinstalltion and trail run for two spell complete as per direction of the engineer-in charge., supplying & fitting fixing of spare parts for 20/25 hp horizontal motor.a) motor fan, b) terminal plate, providing and fitting fixing of fully automatic star delta type motor starter ( 3 ph. 50 hz, 415v, 25hp /18.50 kw relay range within 17-25 ) in steel sheet enclosures with contractors and timer etc. complete suitable for motor pump havells/l & t/bch make direction of the engineer-in-charge.i) 25hp/18.5kw relay range within 13-21 +10%, providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for din fuses). triple pole with neutral link ( tpn ) , 415/500 volt complete as per direction of the engi
Tender For maintenance of rws/pdf/15fc/other panchayat/deposit fund schemes in north tripura district 2025-26/sh- replacement, maintenance of electrical accessories, pump motor etc. in/c. allied works of different sbdtw of jubarajnagar rd block of dws sub-division, panisagar