Latest control board scrap Tenders | Government control board scrap Tenders

Central Government/Public Sector

CTN :40538394

09 Jun, 2025 NA

Kapurthala - Punjab

Tender For supply and installation of single inlet centrifugal fan suitable for 3-phase , 415v ac, along with ducting arrangement for pantry in vande bharat trainsets. specia l note: safety clause must be followed according to annexure-a of dy.cple-ii l.no.rcf/e mp/1 dated.01.04.2025, as per drawing: edts-331, rev. a, corr-1,2 and 3. (type-iii), packing instr uction: alternator,rru, erru &accessories, transformer,bulk inverters , battery, charg er, self priming monoblock pump, inverter, change over control box etc: suitably cove red with biodegradable transparent polythene and packed in wooden cage: bottom fra me to be made of wooden planks 20mm thick &should have support of at least 3 woode n battons of size 100x100mm of suitable length to facilitate lifting by fork lifter. each panel to be packed in wooden cage of suitable dimensions made out of wooden strips o f 20x100mm size. gap between each strip should not be more then 100mm. the material u sed for product packaging shall be eco-friendly.a list should be pasted on each wood en cage showing order no, pl no, description of the item, drg. no/ spec. no ,qty, firm's n ame &address and date of despatch etc. note- 1) firms have option to provide qr code. for linkage of po, the cardboard box shall carry a qr code having details as listed bel ow: a) name of the manufacturer b) purchaseorder number c) pur chaseorder date d) uniqueserial number (or lot number for bulk items) of the manufacturer or e) dateof manufacture f) deliver ychallan no. g) deliverychallan date 2.the qr code shall be as per iso/iec 18004 model2 and the data shall be available as xml using the tags detail ed above. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40539143

07 Jul, 2025 NA

Kapurthala - Punjab

Tender For supply of control panel for radiator fan motor of diesel engine for lhb power ca, a s per drawing: edts114,rev-b,am-1., packing instruction: alternator,rru, erru & accessories, transformer,bulk inverters , battery, charger, self priming monoblock pump, inverter, change over control box etc: suitably covered with biodegradable transparent polyt hene and packed in wooden cage: bottom frame to be made of wooden planks 20mm thic k & should have support of at least 3 wooden battons of size 100x100mm of suitable le ngth to facilitate lifting by fork lifter. each panel to be packed in wooden cage of suit able dimensions made out of wooden strips of 20x100mm size. gap between each strip sh ould not be more then 100mm. the material used for product packaging shall be eco-fri endly.a list should be pasted on each wooden cage showing order no, pl no, descriptio n of the item, drg. no/ spec. no ,qty, firm's name & address and date of despatch etc. [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :40537192

20 Jun, 2025 7.48 Lacs

Amreli - Gujarat

Tender For work of 1) erection, commissioning of equipments, control wiring etc. of 220/66kv 160 mva transformer no.-2 bay for ehv class substation augmentation and 132kv busbar protection panel commissioning at 220kv vallabhipur ss 2)11 kv capacitor bank shifting & power cable shifting at 66kv bunder road ss and 66 kv sardarnagar ss 3) height raising of 66kv vartej-navagam h frame line and 66kv mamsa-bhadi h frame line under tr. division vartej of tr. circle amreli, getco

State Government

CTN :40550536

10 Jun, 2025 70.8 Thousand

Mirzapur - Uttar Pradesh

Tender For transportation of 1no 132 kv transformer control and relay panel and 1no 33kv tripple feeder

Central Government/Public Sector

CTN :40522312

09 Jun, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of a by b.cont.70 a 3tf47 72-0am0 220v ac , step down control transformer 100va 415 by 24v , step down control transformer100va 415 by 220v , step down control transformer 250va 415 by 24v , step down control transfmr 250va440 by 220v -24v , step down control transformer 500va 415 by 24v , 1ph3-pin panel mount socket 2415b bch

CTN :40538619

30 Jun, 2025 NA

Kanchrapara - West Bengal

Tender For supply of igbt based 3-phase drive propulsion equipment with physical medium i.e. esd/emd/ ofg for multi functional vehicle bus (m v b) as per iec-61375, terminal bracket, bus bar link and cu braid required for connection between main transformer and traction converter, auxiliary converter,interfacing connectors,cables and cable looms required for connecti on from vcu1/2 to sb1/2 panel. as per specification no. -(i) rdso/2008/el/spec/0071,rev.5 for ig bt based 3-phase drive propulsion equipment.(ii) clw/es/3/0458 alt.e for control cables.(iii) cl w/es/3/0459 alt.c for screened cable.(iv) clw/es/3/0124 alt.o. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40507656

07 Jun, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of electrical control panel for coolers of transformer- wo: 73582a

State Government

CTN :40497442

04 Jun, 2025 59.3 Thousand

Etawah - Uttar Pradesh

Tender For replacement of protection panel for 100mva 220/132kv transformer at 220kv s/s bharthana and carriage and replacement of 33kv control and relay panel for 33kv feeders at 132kv s/s dibiyapur under etd, etawah.

Co-operative

CTN :40496944

03 Jun, 2025 1.00 Lacs

Bareilly - Uttar Pradesh

Tender For supply of general electrical goods for season 2025-26 - supply of general electrical goods, backlite pipe " bore, 3mm thick, glass sheet " thick, bakelite rod " dia, round type hrc fuse 63 amp ee make, round type hrc fuse 100 amp ee make, amp meter ct operated flush type 96x96 mm 200/5 ratio analog, amp meter ct operated flush type 96x96 mm ratio 150/5 analog, amp meter ct operator flush type 96x96 mm 100/5 analog, amp meter ct operator flush type 96x96 mm 200/5 analog, -do- 300/5 analog, -do- 600/5 analog, -do- 400/5 analog, -do- 800/5 analog, volt meter 0-500 volt 96x96 mm digital, varic unit vac 15 amp, pressure switch range 1-4kg/cm2 5 amp. demfpso, pvc flexible copper wire 1x1.5mm2 national make coil, pvc flexible copper wire 1x1.5mm2 national make, rpm meter meco 0-1200 rpm digital, semi conductor fuse gsg 100 amp. alston/ gf make, -do- 150 amp., dc volt meter with sunt 25amp (0-200) digital, dc volt meter 0-200 volt digital, rail mounting terminal block 10mm2, step down transformer 1500 watt. 240v, step down transformer 1500 watt 24 volt, power board card kfc make 700 hp panel srp model, control card kfc make 700 hp panel srp model, g.o operational amplifier card, field regulating card kfc make srp model, current transmeter ratio 50/5, current transmeter 100/5, current transmeter 150/5, " 200/5, " 300/5, " 500/5, " 800/5, " 400/5, pvc copper wire polycab make all size discount coil on prevailing price list, pvc aluminium wire polycab make all size discount on prevailing price list, flush type switch 5 amp anchore make, -do- 15 amp ", flush type socket 5 amp ", -do- 15amp ", tumbler socket 5amp ", tumbler socket 5amp ", 20 watt led light tube rod, p.t holder pendent type k-555 100 watt, s.t. holder pendent type 100 watt jyoti, s.t. holder pendent type 300/300 watt jyoti, p.t holder angle type 5 amp.k-555, slipring 120 hp 1440 rpm 50 hz ee make, slipring 90 hp motor, push botton 1no+1 nc on off vaishno make with element, plastic cooling fan 7.5 hp motor kh-132, -do- 15 hp kh-160, -do- 20 hp kh-160, -do- 25 hp kh-160, -do- 10 hp kh-132, -do- 5 hp kh-132, pvc tape " 10 mtr. long steel grip, pvc tape 1" 10 mtr long steel grip, glass tape " 30 mtr long, glass tape 1" 30 mtr long, cotton tape 1" 30 mtr long, electro graphite carbon for 700 hp motor grade eg 298 ke make, electro graphite carbon brush for 100 hp motor grade eg 224, electro graphite carbon brush for 75 hp motor grade eg-224, electro graphite carbon brush for 15 hp excitor eg-1875 kva., copper metallic carbon brush 280 amp. slipring of 1857kva, back spring for 700 hp motor ke make, back spring for 100 hp motor ke make, back spring for 75 hp motor ke make, copper metallic carbon brush for 250 hp motor ke make, copper metallic carbon brush for 150 hp motor kec make, copper metallic carbon brush for alternator spring kec make 22x32x40, electro graphite carbon brush for 18.5 kw dc excitor/26 hp slipring motor, crane duty 50 hz 415v 960 rpm without slipring resistance, amp meter 150/5 with ct digital 4"x4", power factor meter 144/144 mm2 digital complete with all accesaries ct etc., glass sleave 2 mm (2/90 meter), glass sleave 4 mm (2/90 meter), glass sleave 6 mm (5/90 meter), glass sleave 8 mm (6/90 meter), glass sleave 10 mm (9 meter), fibre rod 2/2"x1", copper metallic carbon brush 163 kva dg set alternator, bridge rectifier 35 amp usha make, 8 micro ferrodde condenser 440v, 4 -do-, 2.5 -do- 215v, 3.15 -do-, bare copper wire 4 swg mild, brass carbon holder with pin cane unloader 20x20x100 no., carbon brush for cane unloader 20x20x100, thyristor 604 usha make dcr, thhyristor 1004 usha make dcr, backtol red dr. beck, backtol grey, air dry insulation varnish elmo lufta a dr. beck, nicrome wire for heater element 2000w 21 swg, -do- 1000w 21 swg, thiner dr. beck make t-235, isolation dr. beck make t-235, dc volt meter 0-600 with rpm motor 0-1595, 4"x4", rocker rpm for 100 hp dc motor, aluminium cooling fan 150 hp motor, -do- 100 hp motor, -do- 75 hp motor, -do- 50 hp mot

CTN :40139473

30 May, 2025 NA

Rishikesh - Uttarakhand

Tender For corrigendum : procurement of mandatory spares of turbine control panel (tcp), automatic voltage regulator (avr) panel, and transformer relay metering panel of urgam shp

Control Board Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors