Latest control board Tenders | Government control board Tenders

State Government

CTN :42036819

06 Nov, 2025 NA

Chandigarh - Chandigarh

Tender For design, engineering, supply, installation, testing and commissioning of an alert, inform and direct system at six (6) sites - control & monitoring :- the control room shall be set up in the already constructed/available room at the pandoh dam area. this system should include a minimum 43-inch (hd) screen with an adjustable stand, capable of monitoring the operation of the siren station. it should display all feedback, including the status of being on or off, battery health, any faults etc. in the installed equipment. additionally, this system must have the capability to communicate directly with the control room to provide alerts and information in real time., for supply ,testing, designing, erection and commissioning of local station for alert, information and direct system comprising of the following hardware/software: panel/housing with power supply module. the controller, linked with all the control units through a communication and integration unit, displays the system via screens. the sirens should also be remote controlled. the control of the sirens should be according to the commands received from the remote central control station through a two-way gsm/gprs/3g/4g/lte and provision of vsat. security feature including intrusion alarm auxiliary/status control board for contact closure activation and status. the siren system should withstand outdoor environment condition & the siren assembly should be rust proof to withstand harsh and saline environmental condition. single point clicks activation & polling. status monitoring. complete configuration & reprogramming for control site. minimum 15,000 message alert notification through gsm/3g/4g/5g/lte/vsat to bbmb officials/ administrators and local residents according to requirement. programmable hot keys. communication over tcp/ip secure access with password. ethernet cable length :- the bidder shall be responsible for the supply and erection of all cabling required for the complete system, ensuring that the cables are of reputable make only and conform to the prescribed standards as per site requirements. rtu & software :- the r.t.u. and software as per the manufacturer`s design / program, the software should be suitable for controls up to 100+ sirens, the system can be expanded to accommodate changing needs. the software should be app and web based. communication between control centre and sirens. :- gsm/3g/4g/5g/lte network/vsat. pre-recorded voice messages :- live and pre-recorded voice messages in minimum 3 local languages i.e. (hindi, punjabi and english) strobe light :- high intensity led strobe light, color red, amber, green, 60-120 flashes per minute (adjustable), led life > 50000 hrs., pole/top mountable with 360 visibility preferably ip 66. alert tones & voice:- minimum 5 standard alert tones. support transmission of stored voice in siren/voice controller through wave file in memory card, remote activation. remote activation of alert tones and pre-recorded voices the voice messages will be customized, optimized for good quality for the intended location, language preferably in punjabi, hindi & english. warranty period:- 3 years., input power source :- the quantity of solar photovoltaic panels and batteries shall be adequate to meet the systems operational requirements. only reputed manufacturers such as tata solar, vikram, waaree, reil, or equivalent brands shall be supplied. the solar panel input source shall be integrated with the required number of batteries to run the installed system continuously for a minimum duration of three (3) days under idle running conditions. this includes six (6) operational cycles per day, with each cycle lasting a minimum of twenty (20) minutes. a secondary provision for electrical input supply shall be provided to enable system operation in the event of solar panel failure or insufficiency beyond the designed power supply capacity., siren type :- bi-directional electronic siren pre-programmed audio amp

corporations/Associations/Others

CTN :42107740

15 Oct, 2025 NA

Kolar - Karnataka

Tender For auction sale of scrap / condemned beml vehicle bp70 pipe layer,scrap condemned beml vehicle bs42 snow cutter,scrap / condemned beml vehicle bl15-lhd,used / wornout / damaged / scrap / condemned / broken tungsten carbide tips,used / damaged / scrap / condemned / broken hss hacksaw / slitting saw blades,used / damaged / scrap / condemned vernier caliper,used / damaged / scrap / condemned height gauges,used / wornout / damaged / scrap / condemned / broken plain / thread gauges,used / wornout / damaged / scrap / condemned / broken hss tools and cutters,used scrap condemned broken hss drill bits reamers taps,used / damaged / scrap / condemned / broken steel measuring tapes,used / scrap / condemned hardness testing machines,used / damaged / scrap / condemned / broken tungsten carbide lugged gun drills,used scrap condemned brazed facing and turning tools with steel body,used scrap condemned taper shanks arbors holders boring bars,used / damaged / scrap / condemned / broken spanners, chuck nuts, sockets,used / damaged / scrap / condemned / broken carbide tipped dead centres,used / damaged / scrap / condemned / broken gear hobs,used / damaged / scrap / condemned / broken broches,used scrap condemned brazed carbide tipped and insert type microbore catridges,used scrap condemned thread cutting insert type ms tool holders,used / damaged / scrap / condemned / broken co2, lpg, o2 regulators,scrap brass wire which was used in wire cutting machine,used / scrap / condemned mini-drafters,used / condenmed lockes with or without key/s,used / damaged metal detectors,used / condemned various brass items,used / condemned brass water taps,scrap copper turning boring chips,scrap m.s. turning and boring chips,m.s. melting scrap - cut pieces,end bits of steel rods and pipes,used scrap small casting forging bushes,used scrap heavy castings forgings,scrap ms pallets,flame cutting powder,condemned / scrap machines,rusted welding coils,scrap gears,scrap / used scrap stainless steel canteen utensils,used / damaged electrical items,scrap / condenmed parts of transport vehicles,scrap / used steel rope,scrap / condemned solar panel boards,scrap / used holders of co2 welding machine torches,scrap high percentage nickel chromium charge trays,used / scrap / condemned parts of over head cranes,scrap plastic welding spools,scrap / used copper wire with sleave,scrap / used hand gloves

Central Government/Public Sector

CTN :42093044

20 Oct, 2025 19.85 Lacs

Jammu - Jammu And Kashmir

Tender For supply of network infrastructure upgradation at j and k pollution control board office jammu : : - enterprise router , 24-port managed switch 2 sfp , 12u network rack , liu with pigtails , 24-port patch panel , 6- fiber ofc cable , patch cable 1 meter , patch cable 3 meter , 1g sfp module , cat 6 cable 305m box , pvc conduit 25mm , online ups 6 kva , wi-fi dual-band router , rj 45 io box fully loaded , pvc saddle clips , power cable , gang boxfitted with power socket 6a

CTN :41959829

03 Oct, 2025 NA

Bathinda - Punjab

Tender For bid to ras supply of soldering mat , soldering stand , kk2.1.5 flight controller board , glass fiber f450 quad frame , jumper wire male to male and female to female and male to female , 10 inch propeller 3cw and 3 ccw , opera glass , rubber hammer , big tool organiser , 3.7 volt 2200mah , desoldering pump , lipo checker , gps stand , led , dht 11 sensor , screw driver set , screw driver small set , screw box , 1 drill key set , shrink tube , output cables

CTN :41656350

03 Oct, 2025 NA

Tawang - Arunachal Pradesh

Tender For corrigendum : supply of drone assemble items d d - t motor mn 501 tube size motor mount , cube here 4 gps , 6s semi solid 5c rating 25000 mah mad battery , 6s smart lipon battery charger , tarot tl6x001x6 960 mm axis carbon fibre foldable hexacopter frame , mauch 004 pl 200 8 sensor board , mauch 025 pl 4 14s hyb bec , siyi mk 32 gcs , cube orange standrad set flight control board , pay load and other assy

State Government

CTN :41750172

09 Oct, 2025 NA

Kolkata - West Bengal

Tender For corrigendum : supply installation of laboratory wet shaking mineral separation table - shifting and repairing of fumehood by thoroughly opening, checking, and fixing, also, it will include the change of pulley lock and ss rope. the work will include appropriate ducting of the fumehoods during reinstallation., shifting, thoroughly opening, cleaning, fitting, and fixing of the chemical cabinet, along with ducting associated with it during reinstallation., shifting and repairing of a lab bench with a granite top (size 10 ft x 3 ft) and fitting with drawers and cabinets below the lab bench.it must include granite cutting and setting with adjustable nut bolt., water basin repairing, reinstallation, andfitting and fixing with nuts/ bolts, with appropriate clamps, door lockhinge with a bottom portion having a storage rack., installation of the air exhaust motor 440v, along with the pipeline, by opening and re-fixing. it will include blower motor repairing and ball bearing changing., reestablishment of electric connection for fumehoods in the new lab, blower motor cable, and starting relay control board. installation of switch lamps for the fumeoods., air pressure monitor repairing and servicing for the fume hoods.adaptor sensor data cable complete fitting and fixing., complete painting of fume hoods.inner & outer, chemical storage and lab bench, as well as a wash basin.

Central Government/Public Sector

CTN :42078444

18 Oct, 2025 NA

Multi City - Multi State

Tender For supply of lte to oem oes opm for procurement of auto lubs spares of bh60 and cat773e dumper d d - throat and piston sealkit part no.24h853 , air piston kit part no.24u230 , throat and piston seal replacement kit part no.24h854 , o ring and seal replacement kit part no.24h856 , air piston kit part no.24u984 , air valve repair kit part no.24h798 , pilot valve replacement kit part no.24h749 , complete elbow fitting 1 by 8 npt part no.eec60251 , ferrule 06l part no.eec60252 , coupling nut m6 part no.eec60253 , hose stud for hose 8.4 part no.eec60254 , hose sleev polymate hose od 8.4mm part no.eec60255 , stright fitting ge 06s 1 by 8 bsp part no.eec60256 , 06l str union part no.eec60257 , kit dust cap part no.eec60259 , polymide hose 8.4mmodx4mmi.d 50mtr part no.gha8404 , clc 4400 controller part no.24b591 , 3 point manifolt part no.eec134363 , 4 point manifold 3500 psi part no.eec134364 , 5 point manifold 3500 psi part no.eec134365 , solenoid valve part no.g114488 , frl unit part no.g217072 , vent assy part no.g115121 , kit control board replacement part no.eec24t867 , plc controller part no.g24n468 , kit seal hp models part no.eec24t860 , kit vent valve part no.eec77x540 , x station adaptor part no.eec60258 , cable 6ft vent valve part no.eec24n402 , ld series grease pump part no.eec24g600 ) /bid number : gem/2025/b/6728800 * /dated: 27-09-2025 & & / bid document 1 / 39

corporations/Associations/Others

CTN :42072952

03 Oct, 2025 NA

Vijayapura - Karnataka

Tender For auction sale of scrap aluminium bus (cv),scrap door with panel,scrap glass,sheared bodies scrap,sheared bodies scrap (cv),defaced engine (4w),li-ion battery (pcb category),scrap e-waste,car carrier container with 4 tyre,defaced engine (cv),tyre with rim (cv),scrap differential (cv)

CTN :41689344

03 Oct, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : tender for supply of 25vk1c901 automatic voltage regulator : - automatic voltage regulator - ekm , dc insulation measuring and monitoring system (dcims) , power supply card (ps1) , diode (d1) , controller card with associate wire hardness ( con , controller board (cont-1) , display board (lcd-1) , power supply board (ps) , switch board (swb) , indication lamp (h1) , indication lamp (h2) , dc voltmeter (v1 , v2) , dc ammeter (a1) , hrc fuse (f1) , dc shunt (sh1) , dc-dc converter module , socket (sk1) , plug (pl1) , power supply module (ps1) , cooling fan (fan5-fan6) , cooling fan (fan7-fan9) , capacitor (c1 , c2) , timer (tm) , contactor (k1) , contactor (k2) , inductor (l1) , resistor (r1) , rs 485 comm board (rs485) , o/p lamp , emi emc fitter (fl1) , cooling fan (fan1-fan4) , indication lamp (h1 , h2) , isolation transformers (t1 , t2) , dcims signal conditioning card (scc card) , buzzer (bz1) , lcd module (lcd1) , start push button 4a , 250v green , man machine interface (mmi1) , rs232 to rs485 converter (rs232-485) , control cable (w1) , training charges as per para 1(y) of atc , type testing charges (if any)