Get complete information related to latest Control Cable Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Control Cable Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Control Cable Tenders.
Tender For supply, storage, installation, commissioning and trial run of electro-mechanical equipment at raw water and clear water pumping station under kanchrapara municipality. - for rwps, supply, delivery , storage, installation, testing & commissioning of vertical turbine type centrifugal pump with cashion pipe ,column assembly, discharge head, sole plate, motor stool and all other accessories all complete of 750m /hr discharge at a head of 29 mtr at duty point as per technical specification . maximum allowable speed of pump shall be 1000 rpm., supply, delivery , storage, installation, testing & commissioning of vertical, scim ,tfec, 110 kw (minimum), 415 v 10% , 50hz 05%, speed 1000 rpm (syn) , to vertical pump duty motor to match with pump at sl no- (1) complete with coupling hub and all other accessories as per specification., supply, delivery , storage and installation at site of ms pipes, specials, joints, flanges as per specification and technical offer. (for both individual pump delivery pipe and extended part of common manifold if required) ., supply, delivery and installation and commissioning of valves complete at site with fixture as per specification and technical offer & as follows :-, di butterfly valve for delivery side of pump fitted with electrical actuator suitable for local and control desk operation and display system for the individual pump delivery pipe line. (350 mm minimum))(pn 16 type), di non-return valve for individual pump delivery pipe line. (350 mm. minimum))(pn 16 type), supply, delivery at site and storage of m.s. dismantling joint assembly for the individual pump delivery pipe line as per specification (350 mm minimum)., supply, delivery ,storage and installation at site of pressure gauges complete with fittings and fixture as per specification, pressure gauge for delivery side (0 10 kg / cm2), supply, delivery ,storage and installation at site of pressure transmitter complete with fitting and fixture as per specification as follows:-, pressure transmitter for delivery side ( 0 10 kg / cm2 ), supply, delivery at site and installation of m.s. structural materials for cable tray / rack, panel installation supports, pipes & valves supports, fabricated stairs & all other fabrication work., lt panel, modification / retrofitting/expansion/addition of the existing pmcc with supply , delivery & installation of a new additional motor starter feeder at rwph in order to accomodate the extra pump-motor feeder of requisite rating not less than 110 kw .the modification/addition should match/synchonise the existing panel and should ensure smooth operation of the complete panel as a single entity and should be fit to install at the existing pump house., retrofitting of existing control desk at site with supply,wiring, installation of additional items like temparature scanner , multifunction meter , microprocessor based position indicator, digital pressure indicator,tnc switch, push button switch, indication lamps etc .as required to complete for the new pump motor set., supply ,delivery, laying, installation of power cable of adequate size from motor feeder to motor .(min. 2 run x 3core , 185 sq mm xlpe armoured al. for each feeder), supply ,delivery, laying, installation of power cable of adequate size and length from pmcc to motor space heater . (min. 3 core 2.5sq mm. armoured cu for each motor), supply ,delivery, laying, installation of power cable of adequate size and length from pmcc to valve actuator etc. elsewhere required. (min . 4 core 2.5 sq mm. armoured cu), making end termination of all the power cables as stated in sl no 11,12,13 with all necessary equipments like termination kits(dry type), lugs , glands etc , installed for the modification job., supply ,delivery, laying, installation of controlcables of different size as required for the purpose and length for completing the different control connections between control desk, motor feeders , lpbs, pmcc etc.to the satisfaction o
Tender For supply of bogie brake hanger safety pin l clamp for locomotive as per is 2062 drg no et miscellaneousellaneousellaneousellaneousellaneous 259,bogie brake hanger safety pin l clamp for locomotive as per is 2062 drg no et miscellaneousellaneousellaneousellaneousellaneous 259,bogie brake hanger safety pin l clamp for locomotive as per is 2062 drg no et miscellaneousellaneousellaneousellaneousellaneous 259,bogie brake hanger safety pin l clamp for locomotive as per is 2062 drg no et miscellaneousellaneousellaneousellaneousellaneous 259,bogie brake hanger safety pin l clamp for locomotive as per is 2062 drg no et miscellaneousellaneousellaneousellaneousellaneous 259,a set consisting of 04 item high tensile hex head bolt screw grade 10.9 as per is 1367,a set consisting of 04 item high tensile hex head bolt screw grade 10.9 as per is 1367,a set consisting of 04 item high tensile hex head bolt screw grade 10.9 as per is 1367,a set consisting of 04 item high tensile hex head bolt screw grade 10.9 as per is 1367,a set consisting of 04 item high tensile hex head bolt screw grade 10.9 as per is 1367,pvc inner sheathed controlcable copper conductor 1.0 sq mm 25 core working voltage 650v 1100v as per is 694,pvc inner sheathed controlcable copper condu
Tender For corrigendum : supply of set of cross linked polyolyfin heat shrinkage sleeve for controlcables comp rising of 3 items 128 mtrs. as per sketch no. bsl/elw/sk.no. 9036 alt-2 or latest.specn.no. cl w/es/i-15 alt 'e' or latest. this item is reserved for purchase from clw approved sources o nly failing which offer will be ignored. [ warranty period: 30 months after the date of delivery ]
Tender For supply of chairman unit with shotgun microphone , delegate unit with shotgun microphone , chaiman and delegate microphone controller , power repeater for chairman delegate system , 8 in 8 out dsp for conferencing , ceiling speaker , quad channel amplifier , dual channel wireless handheld microphone set , cat5e type b 20 meter network cable , sdvoe compatible matrix switcher for av over ip , sdvoe compatible hdmi 2.0 receiver , sdvoe compatible transmitter for transmitting hdmi 2.0 rs-232 bidirectional ir , sdvoe compatible hdmi 2.0 for receiving hdmi 2.0 rs- 232 ir , management unit for controlling and monitoring , 3 meter usb full-featured type-c cable for usb 3.1 gen2 , 3 meter premium high speed hdmi 2.0b cable, bandwidth up to 18gbps , 10 meter usb 3.1 gen1 superspeed active extension cable typea male to typea female , 10g av over ip certified 24 port managed poe switch , interactive monitor with pedestal stand , retractable touch-screen monitor for chairperson , 4k ai 20x optical zoom ptz camera , other speaker, microphone, network cables and connectors , installation and commissioning , comprehensive amc for 2 years post completion of the oems back-to-back warranty bid number/ & ( * ) : gem/2025/b/6118088 dated/ + : 15-04-2025 bid document/ 3 3 1 / 23
Tender For supply of shifting of pac units from jaisalmer to sardarpura and basni jodhpur - supplying of 0.63mm thick gss sheet , supplying of 0.80mm thick gss sheet , supplying of 1.00mm thick gss sheet , sitc of gi volume control damper , supplying and fixing of powder coated extruded aluminium return air grills with louvers , supplying and fixing of 4x16 sqmm power cable , supplying and fixing of controlcable of 3x2,5sqmm , sitc of 40mm upvc pipe , sitc of 20mm upvc pipe , sitc ms cable tray 100mm width x 50mm x 1.6mm thickness , sitc ms cable tray 150mm width x 50mm x 1.6mm thickness , sitc of gi strip for loop earthing , dismantling and removing the existing laid old power or controlcables , dismantling the existing old package units , recovering the existing laid refrigerant piping of old defective , dismantling the existing old ducts of package units , transportation of the existing fitted old dissmantled package a.c. units , itc of 7 tr sensible high precision ac package unit , supplying and charging of the referigerant gas r-407 , supply and fixing liquid line filter drier , supply and fixing of size 1-1 by 8 inch and 18 gauge copper referigerant pipe , supply and fixing of size 7 by 8 inch and 18 gauge copper referigerant pipe , supply and fixing of size 5 by 8 inch and 18 gauge copper referigerant pipe , laying of 1-1 by 8 inch recovered copper referigent pipe , laying of 7 by 8 inch recovered copper referigent pipe , laying of 5 by 8 inch recovered copper referigent pipe , providing ms structure for outdoor or indoor units , itc of 100mm width x 50mm x 1.6mm , itc of 150mm width x 50mm x 1.6mm , itc of old recovered 4x10 sqmm cable , itc of old recovered 4x1.5 sqmm cable , laying of existing 25 mm x 5 mm thick g.i. strip bid number/ & ( * ) : gem/2025/b/6140065 dated/ + : 15-04-2025 bid document/ 3 3 1 / 29
Tender For routine, breakdown maintenance, laying of ht, lt power cable, various controlcables and cleaning of various cable trenches and cable trays as per scope of work of 2x500mw, btps, anpara.
Tender For tender for supply of power and controlcables as per tender - for brief description please refer bid details sheet of gem document , for brief description please refer bid details sheet of gem document , for brief description please refer bid details sheet of gem document , for brief description please refer bid details sheet of gem document , for brief description please refer bid details sheet of gem document , for brief description please refer bid details sheet of gem document , for brief description please refer bid details sheet of gem document , for brief description please refer bid details sheet of gem document , for brief description please refer bid details sheet of gem document