Latest coolant system Tenders | Government coolant system Tenders

Co-operative

CTN :40029812

25 Apr, 2025 4.80 Lacs

Rewari - Haryana

Tender For annual maintenance contract for air ventilation system - 124943, 1.000, amc of air ventilation system-paneer sec,pls see the attached technical specification, 124942, 1.000, amc of ductable ac-paneer section.pls see the attached technical specification, 124944, 1.000, amc of cold store ac unit-paneer section,pls see the attached technical specification, 121115, 1.000, amc of yoghurt cold store unit,pls see the attached technical specification

CTN :39997624

26 Apr, 2025 24.62 Lacs

Mainpuri - Uttar Pradesh

Tender For mainpuri npp mainpuri ward kharpari from dherendra cold store to vikas bhadauriya house cc and nali work

Central Government/Public Sector

CTN :39834909

21 Apr, 2025 NA

Bangalore - Karnataka

Tender For corrigendum : supply installation testing and commissioning of cnc horizontal lathe - cnc horizontal lathe with accessories , chip conveyor , dia 300 mm three jaw chuck , steady rest dia 20mm to 150mm or better range , bmt turret axial tool holder type 1 -2 nos , bmt turret radial tool holder type-1-4nos , bmt turret boring bar holder dia 50mm - 2nos , bmt turret collet type holder for er32 collets , boring bar sleeves , hard jaws for 3 jaw chuck -1 set extra and soft jaws for 3 jaw chuck - 1 set , ups backup for controller , panel cooler ac , coolant system , hydraulic system , pre- dispatch inspection -pdi , installation and commissioning , stabilizer , standard tools and toolbox , hand held gun , hand coolant gun , set of spares for machine maintatinence , oil skimmer , first fill of lubricating oils,coolant , document and manuals , packaging and forwarding

Corporations And Associations And Others

CTN :40000646

25 Apr, 2025 NA

Faridabad - Haryana

Tender For special repair of pack house cum cold store in ngm at dabua, constituency nit faridabad, district faridabad.

Co-operative

CTN :40010087

21 Apr, 2025 40.0 Thousand

Rewari - Haryana

Tender For repairing for cold store door-doors of milk bm curd and ice cream cold store are frequently damaging and need service to repair itsize of the doors 1200 x 2100 mmparty will visit the site and based on that they will provide the quotation.material will be in scope of vendor

Central Government/Public Sector

CTN :39822931

15 Apr, 2025 NA

Bengaluru - Karnataka

Tender For corrigendum : supply and installation of kitchen equipments for hostel mess at indian institute of science, bengaluru - dry store, ss platform digital weighing scale.ss platform of size 600 x 600mm, power supply - 230v ac, 50 hz, display colour/digit - red/ green/ 6 digits, display size - 0.56" (14.22 mm), number of keys - 5 keys, battery - 6v / 4ah,, mobile ingredient bin mobile ingredient bin with slant top, sliding lid, castors & scoop.37 gal. (140 l) slant top, with scoop, a hygienic clear sliding lid, bins should made of nsf-listed, fda-accepted material, bins has to be designed with a slanted top to easily access product., ss low height platform rack (dunnage rack).38 x 38mm pipe frame structure, 38 x 38mm pipe cross support with a spacing of 70mm, 6 nos leg of 38mm sq. ss legs fitted with adjustable nylon bullet feet., ss storage rack with 4 shelves.18swg ss shelves double beaded on all sides, reinforced with 25 x 100 x 25mm hat channels, dia 38mm ss round legs fitted with adjustable nylon bullet feet., walk in cooler, walk-in cooler, +2 deg c to +8 deg c.unit should be made from 60 mm thick prefab rigid puf sandwich panels with 1mm thick ss 304 grade sheet outside and inside, the cold room should be with ceiling and wall panels interlocked through a cam lock mechanism, fitted with a hermetic sealed compressor. the condensing unit should be split type, which is air cooled. swing type and insulated door having magnetic gasket, safety latch, lock and heavy duty hinges. the room should maintain a temperature of +2 c to +8 c. all accessories like light, light switch, emergency switch, door heater, vacuum release, temperature indicator to be provided with the unit. the refrigerant used should be r 134a. flooring inside the cold room is kottah stone flooring (flooring in client scope)., perforated storage rack with 4 shelves.16swg ss shelves double beaded on all sides with perforation in entire length and width, 50 x 5 mm perforation with a spacing of 15mm, stiffed with 25 x 100 x 25mm hat channels, 38mm ss round legs fitted with adjustable nylon bullet feet., veg prep area, ss work table with 2 sink unit & 1 u/s.16swg ss sunken top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 2 nos sink of size 450 x 450 x 300mm deep, radius corners, fitted with 38mm waste coupling, 150mm splash guard on rear and (left/right) sides, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., mixer faucet, single hole, deck mount mixing faucet.single hole deck mount mixing faucet with polished chrome plated brass body, 10 1/8" swing nozzle with full flow laminar flow device, quarter-turn ceramic cartridges, lever handles, 18" flexible stainless steel supply hoses with 1/2" npsm / 5/8" o.d. compression connections. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., single hole single temperature deck mount faucet for ro watersingle hole single temperature deck mount faucet with polished chrome plated brass body, 5 7/8" swivel gooseneck, 2.2 gpm aerator, ceramic cartridge, lever handle and 1/2" npsm male inlet. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., chopping table with 1 u/s.full length and full width 40mm food grade nylon chopping board supported by ss angle frame, 150mm rear splash on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., ss work table with 2 u/s.16swg ss top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 150mm splash guard on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., commercial k

Corporations And Associations And Others

CTN :39938978

15 Apr, 2025 NA

Rohtak - Haryana

Tender For general mill store items - s. s. 304 split pin size 5/25, as per sample, good quality, ring type rubber bush for travelling grate drive coupling, as per sample, good quality, m. s. washer i.d 17mm , od 30 mm, thik- 3mm, as per sample, good quality, cotton waste, good quality, turk head wire bush o.d- 55mm, heavy duty, hexa blade high speed, cutting wheel ag-4, grinding wheel ag-4, buffing wheel ag-4, emery cloth rough, carborundum, stream hose-1w size- 1 (25mm), tube- black epdm reinforcement: double wire braded high tensile steel wire, cover black epdm, make- indomabsson, rustolene (500ml) pack, good quality, wire brush, good quality, paint brush 4 , good quality, paint brush 2 , good quality, old dhoti 4mtr, good quality, teflon tape, m-seal, white lead, red lead, soldering flues, soldering paste, copper rivet 5x25mm, old dhoti, s. s. sim (0.05 to 0.5mm), make- skf, taflon hammer, star coupling (l-190) rubber, engine oil for actuator 20w40, make- castrol/servo, rustolene, brasso 500ml, annabond 666, asbeston flat temp: 1000 c 3 rol (30 mtr each), d.p. test kit 96, make- checkmate, d.p. test kit 97, make- checkmate, d.p. test kit 98, make- checkmate, lead wire 0.5mm, wd-40, cold galanizing sprey, make- molykote, metallic joint sheet thicknes 1/32 , make- uniklinger, m. s. washer , m. s. washer 3/8 , m. s. washer 1/2 , m. s. washer 5/8 , m. s. washer 3/4 , m. s. washer 1 , m. s. bolt with nut 7/8 x 5 , m. s. nut only , m. s. bolt with nut x 2 , m. s. bolt with nut x 4 , m. s. bolt with nut x 6 , h. t. bolt with nut size x 4 , h. t. bolt with nut size 7/8 x 4 , bolt with nut 5/16 x 8 , s. s. bolt with nut x 6 , s. s. bolt with nut 7/8 x 10 , m. s. nut with bolt x 1 , m.s nut with bolt x 1 , m. s. nut with bolt x 2 , m. s. bolt with nut x 3 , m. s. bolt with nut x 4 , m. s. bolt with nut x 2 , emery paper fine, m. s. bolt with nut 5/16 x 2 , m. s. bolt with nut 5/16 x 2 , m. s. bolt with nut 3/8 x 1

CTN :39939003

01 May, 2025 9.00 Lacs

Rohtak - Haryana

Tender For regarding procurement of new cold store room for central store central store

Co-operative

CTN :39959932

15 Apr, 2025 NA

Trivandrum - Kerala

Tender For supply of air blast freezer, , flake ice unit , cold store unit and chiller unit for matsyafed value added fish production centre, mulakuzha, chegannur

Co-operative

CTN :39972851

01 May, 2025 22.00 Lacs

Mehsana - Gujarat

Tender For design, supply and labour job for installation, testing & commissioning of paneer blast room cum finished good cold store for paneer plant at dudhsagar dairy, mehsana, gujarat, india

Coolant System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors