Latest cooling unit Tenders | Government cooling unit Tenders

Central Government/Public Sector

CTN :43012968

13 Dec, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For supply of c73240000350 supply of high performance wall mounted pac unit air cooled dx type precision cooling units of capacity min 2 tr refer annexure iii , 100000000000 supply of interconnecting hot gas and liquid gas copper piping between indoor and outdoor unit refer annexure iii , 100000000001 supply of interconnecting copper cabling for power control panel of xlpe insulated refer annexure iii , 100000000002 supply of interconnecting copper cabling between indoor and outdoor unit with fitting and accessories for indoor blower refer annexure iii , 100000000003 supply of interconnecting copper cabling between indoor and outdoor units for hp,lp, a1 , a2, blower fan alarm etc refer annexure iii , 100000000004 supply of cpvc condensate drain piping 25mm with 9mm insulation in building area along with fitting and accessories refer annexure iii , 100000000005 installation testing and commissioning of high performance wall mounted pac unit air cooled dx type precision cooling units of capacity min 2 tr refer annexure iv , 100000000006 installation of interconnecting hot gas and liquid gas copper piping between indoor and outdoor unit along refer annexure iv , 100000000007 installation of interconnecting copper cabling for power control panel of xlpe insulated pvc sheathed refer annexure iv , 100000000008 installation of interconnecting copper cabling between indoor and outdoor unit with fitting and accessories for indoor blower refer annexure iv , 100000000009 installation of interconnecting copper cabling between indoor and outdoor units for hp,lp, a1 , a2, blower fan alarm etc refer annexure iv , 100000000010 installation of cpvc condensate drain piping 25mm with 9mm insulation in building area along with fitting and accessories refer annexure iv ) /bid number: gem/2025/b/6951804 * /dated: 02-12-2025 & & / bid document1 / 13

Central Government/Public Sector

CTN :42509267

08 Dec, 2025 NA

Bangalore - Karnataka

Tender For corrigendum : supply of 477411920181 - liquid cooling unit-atulya

State Government

CTN :42806429

08 Dec, 2025 NA

Sangli - Maharashtra

Tender For corrigendum : supply, installation, training, testing of cold chain machinery and puff pannel for integrated pack house-169.82 sqm, pre-cooling unit- 8 mt, cold storage-300 mt - supply, installation, training & testing of cold chain machinery and puff pannel for integrated pack house-169.82 sqm, pre-cooling unit- 8 mt, cold storage-300 mt

State Government

CTN :42931839

18 Dec, 2025 26.69 Lacs

Baramulla - Jammu And Kashmir

Tender For procurement of mandatory spares (not part of amc/rmc) - brass bush rod 50mm2, 2 v , 400 ah transparent lead acid battery, 4 led tube rod (complete set), air break contactor 3tf24, air break contactor mnx-a1(siemens/l&t), air break contactor points for 3tf47, aluminium conductor for 14mva xmer jumper with clamps as per sample 40 meter length, araldite, brass bolt with nut 16mm, 4 inch, brass bolt with nut 18mm, 6 inch, brass bush rod 75mm3, broom, bucholz relay for 14mva xmer, bush rod for 11 kv, cadimium compond, carbon brush (reputed make like merson etc), carbon brush for crane as per sample, cast iron welding rods, ceiling fan, change over switch 250 amps, change over switch 450 amps, compressor head seal (as per sample), contactor for miv panel, cork sheet 1.5 mm,6 x3 , cork sheet 10mm,6 x3 , coupling bush for hs pump as per sample, cup oil seal for bush 11 kv, cutting wheel 4, exhaust fan for workshop 12 , exhaust fan of size 17.5 inches as per sample, filter for hs pumps as per sample, flat iron 5 mm x 25 mm, gate valve 1 inch, gate valve 1/2 inch, gate valve flange type 200mm, gate valve flange type 80mm, gear for 33 kv breaker as per sample, grinding wheel 4, heater pins, heater rods 1000 watt (standard quality), hexa blade, holdite 500 gm tubes, ht tape rolls (10 metre ) 11-33 kv, hv bush seal 132 kv, hydrometer, khadi cloth, lamp 100 watt, leather sheet 8 mm 4 x 10 meter, led 18 watt bulb, link lock (65 mm), lock for 33kv breaker as per sample, lpg gas, lv bush seal 11 kv, mcb double pole 6 a, mcb double pole 10 a, mcb double pole 16 a ( installed at site), mcb double pole 20 a, mcb double pole 25 a, ml4 starter dol, ms flat iron 50x5mm, nabader / felt packing 10mm, neoprene rubber gasket 1/3/5 mm (20/30/150 kg), nrv 1 inch as per sample, nrv 1/2 inch as per sample, old sarees, oxygen gas along with cylinders 150 bar, petroleum jelly, pvc cable kit 1000 sq mm, single core, pvc cable kit 800 sq mm, pvc pipe 1 inch, pvc pipe 2 inch, pvc pipe 3/4 inch, pvc tape rolls, pvc wire 1.0 sq mm (90mtrs coils - cu make), pvc wire 2.5 sqmm 2 core (cu make), ss combine 16 a, ss combine 32 a, reversible starter, rubber bush seal for 14mva xmer, rubber cord 10mm, rubber cord 8mm, seal for high pressure miv pumps as per sample, sf6 gas cylinder, silica gel blue colour, ss coupling, ss nut, bolt 12mm, 16mm,20mm, 30mm (50 each), ss shaft 10 inch long for 75hp as per sample, ss shaft sleeve for 75 hp vt pump, stopper bolt 16mm as per sample, stud ss m12, m16,m20,m30 (length off sizes) with bolts as per sample for cooling system, teflon tape rolls, thermal overload relay for miv panel, welding electrode 3.5 mm sundeep make, welding electrode 4.0 mm sundeep make, wire rope 25mm, wire rope 28mm, wti for 14 mva transformer, transformer oil, heater element for distillation plant, bamboo 15 feet, wire brush, nrv 50mm working pressure 42 kg/cm2 for miv opu as per site, brake liner as per sample, pressure relief valve for miv opu working pressure 42 kg/cm2 as per site - brass bush rod 50mm2, 2 v , 400 ah transparent lead acid battery, 4 led tube rod (complete set), air break contactor 3tf24, air break contactor mnx-a1(siemens/l&t), air break contactor points for 3tf47, aluminium conductor for 14mva xmer jumper with clamps as per sample 40 meter length, araldite, brass bolt with nut 16mm, 4 inch, brass bolt with nut 18mm, 6 inch, brass bush rod 75mm3, broom, bucholz relay for 14mva xmer, bush rod for 11 kv, cadimium compond, carbon brush (reputed make like merson etc), carbon brush for crane as per sample, cast iron welding rods, ceiling fan, change over switch 250 amps, change over switch 450 amps, compressor head seal (as per sample), contactor for miv panel, cork sheet 1.5 mm,6 x3 , cork sheet 10mm,6 x3 , coupling bush for hs pump as per sample, cup oil seal for bush 11 kv, cutting wheel 4, exhaust fan for workshop 12 , exhaust fan of size 17.5 inches as per sample, filter for hs pumps as per sample, flat iron 5 mm x 25 mm, gate valve

Central Government And Public Sector

CTN :42976547

08 Dec, 2025 NA

Siliguri - West Bengal

Tender For supply of 30 kw motor for oil cooling unit (centrifugal design) for 3-phase loco to rdso spec. no. e-10/3/09(motor) of august 1997 with amendment slip no. 1 to 6.

Central Government/Public Sector

CTN :42948344

08 Dec, 2025 39.92 Lacs

South Andaman - Andaman And Nicobar Islands

Tender For supply of interior setup of mi room building at nayagaon d d--inbuilt iv stand , installation and fixing of overhead curtain track channelled with hooks using quality cotton screen of green shade. , fitment of sun-light proof blinds in the existing 04 in windows 12 square feet and installation of 02 in no. air cooling unit of 1.5 tonnage cooling capacity for conducive temperature. , fabrication and installation of nursing station table 4x3 feet and fitment of ss sink integrated with 01 in no. hot water dispense system. , fabrication and installation of medicine-medical instrument storage rack 6x3 feet with inbuilt multiplicity drawers. , installation and fitment of exhaust system suitable signage board 2.5x1 feet general printed notice board 35x2.5 feet for patient details as per sample. , installation and fitment of isolated patient inspection bed 6x3 feet with inbuilt iv stand along with suitable cooling mattress and three fold hospital partition screen 01 no. , installation of 01 in no. ro water system integrated with deep ss sink provisioned with cold water dispense taps for immediate burn care. , fabrication and fitment of dressing table 6x3x1.5 feet with inbuilt drawers, installation of storage facility for medical utilities of nursing assistant. , fabrication and fitment of 01 cushioned recliner cum seating arrangement 03 seater for patient comfort with integration of iv fluid administration stand. , installation of sun protection blinds 01 no. air cooling unit 02 tonnage cooling capacity for conducive temperature maintenance. , installation of 01 in no. patient inspection bed-table integrated with iv drip stand along with three fold hospital curtain-partition screen 01 no. , installation and fitment of working table-extension of water proof slab integrated with overhead wall cabinet for emergency kit. dimension- 4x2x1.5 feet. , installation and fitment of washing area integrated with deep size ss sink with dual tap fitted with 01 in no. hot and cold water dispensing unit and packing of suitable hospital receptacles 02 no. , movable stretcher bed with inbuilt fluid infusion stand for swift shifting of patient. , fabrication and installation of 04 in no. medicine storage rack of 6x2x10 feet with drawers and bins. , fitment of 01 in no. rack and bin system 10x6x0.5 feet for day to day use of medicine, bandages, cottons and other medical utilities including overhead cabinets 2x5x1.5 feet. , installation of 01 refrigeration unit 300 litres double door for safe stowage of critical medicine-injection , installation of 01 in no. indoor temperature cooling unit of 1.5 tonnage cooling capacity with integration of existing electrical infrastructure for preservation and prevention of damage to medicine. , fabrication and installation of medicine distribution counter cum workstation of size 11x3x6 feet, , fitment of 02 in no. window blinds sun protection blinds of 6 square feet. , fabrication and installation of 02 in no. 6x2x6 ms rack and key arrangement. , fabrication and fitment of stowage facility- cage for securing of back up oxygen cylinders. , provisioning of 01 in no. double door shelve 7x3 feet with multiple racks for safe keeping of hospital linens and necessities including stowage facility for dues in medical apparatus. , installation and fitment of 04 nos exhaust system.

Central Government / Public Sector

CTN :42959622

19 Dec, 2025 NA

Secunderabad - Telangana

Tender For supply of scavenge blower to tm/oil cooling unit including motor (wound with corona resistance wire) as per clw's specn.no.clw/es/3/0021 alt-h and rdso spec. no. rdso/spec/e-10/3/09(motor) with amendment nos. 01,02,03,04,05 & 06. or latest.

Central Government/Public Sector

CTN :42960131

02 Jan, 2026 NA

Jodhpur - Rajasthan

Tender For supply of cold cleaning agent auco-alu b made by messrs. auco, gerwigstrasse 24-26. d-78234 engen) or nulon r40 or afso clean ad-2o or equivalent cold cleaning agent for cleaning of aluminium radiators of oil cooling unit fitted in 3-phase electric locomotives as per rdso smi no. rdso/2016/el/smi 0287 (rev-1) dt 15.06.2018

CTN :42960671

22 Dec, 2025 NA

Bokaro - Jharkhand

Tender For supply of impellers for oil cooling unit for transformer of wag-9 locos

State Government

CTN :42933791

08 Dec, 2025 42.83 Lacs

Ganjam - Odisha

Tender For supply of spares for wilo mather and platt v.t. pump of berhampur water supply system - the list of pump fittings for vt pump model-vmp-21a, sl. no. 81280333/80 of wilo-mather & platt make., thrust block with moc of en8 (part no 2883), spherical roller thrust bearing with moc of std (part 2604), key for thrust block with moc of ss 410 (part no 3280), oil level indicator with moc of std (part no 4700), thrust bearing housing with moc of cast iron (part no 2882), cooling coil with moc of copper (part no 2732), water thrower with moc of nitrile rubber (part no 2070), impeller with moc of cf8m (part no 1500), suction bell mouth with moc of cast iron (part no 4910), suction strainer with moc of ss 304 (part no 4900), o ring( st. box) with moc of nitrile rubber (part no 4250-5), o ring for rm pipe with moc of nitrile rubber (part no 4250-2), o ring( bottom pipe ) with moc of nitrile rubber (part no 4250-1), bearing cover with ratchet with moc of ca15 (part no 2880), oil retainer bush with moc of m.s. (part no 2810), gasket (for bearing housing) with moc of champion af 120 (part no 4080), rising pipe (intermediate) with intermediate bearing bush carrier with moc of m.s & c.i. (part no 1151,2820)

Cooling Unit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors