Latest coping stone Tenders | Government coping stone Tenders

Central Government/Public Sector

CTN :45031536

07 May, 2026 NA

Multi City - Maharashtra

Tender For auction sale of others - scrap rcc water tank¿02 nos consisting of ¿structural steel(ms angle, channel, i beam, rolling shutter, plate, tie plate, gi pipe, tie bar patti, toothed gear wheel, window grill, pipe of hand rail, purlin, truss, gi ladder, plate, window sheet, pgi sheet, down take pipes, valley gutter,m20 hex nuts, )structural rails, reinforcement bar, wooden, gi sheets/pipes, mangalore tiles, , flooring(pcc), brick masonary, stone masonary, rcc/pre cast slab/reinforcement ,etc. remarks : - 1. the delivery will be made on as is where is basis and by lot basis. the items mentioned in the description only will be delivered. 2. lot is approachable by kutcha/pucca road. 3. lot number is exhibited/painted on the structure. 4. the quantity is worked out on approximate basis. 5. the delivery will be made on lot basis and no part delivery will be allowed. 6. materials like electric wires, fittings & cables and other such kind of materials. available in side the building/structure which is not within the scope of lot description, shall be handed over by the purchaser to custodian. 7. the items used in fencing around the structure such as rail, tie bar, jali, stone, bricks, wooden pillar or any other items and similar type of material lying nearby the structure/lot will not be delivered. 8. dismantling& cutting is allowed for easy loading purpose at the risk & cost of the purchaser. dismantling is permitted upto ground level only 9. the purchaser should ensure that during dismantling & cutting operation no nearby structure/building should be affected and take necessary care/safety precautions to avoid any mishap as well as damage to railway property. 10. the purchaser will be fully responsible for his labors if any accident/unusual incident occurs at worksite/place during dismantling. extra precaution to be taken if there are trees near the structure or its branches are spread over the same. 11. after complete removal of rcc/bricks/rubble masonry and rubbish from the site, delivery of other items will be permitted and the land should be cleared of all debris before completion of delivery. 12. purchaser should personally visit the site and the see the lot in regard to loading/lifting. no claim will be entertained after saleof lot. 13. only structural rails will be delivered. other type of rails will not be delivered. 14. lot is ok for sale with above observations. stock holder :- sse( works) igp qty :-1.0 by lot.

Central Government/Public Sector

CTN :45031537

07 May, 2026 NA

Multi City - Maharashtra

Tender For auction sale of others - scrap condemned/abandoned railway quarter- 1. ksra (east)- h2/f1/d2 d 146/147 2. ksra (west)- ma/ 148-150 a& b rb-1/159/1-2,3-4 k туре к/89 k type k/89 rb-1/152/1-8 grand total 38 nos consisting of structural steel(ms angle, channel, i beam, rolling shutter, plate, tie plate, gi pipe, tie bar patti, toothed gear wheel, window grill, pipe of hand rail, purlin, truss, gi ladder, plate, window sheet, pgi sheet, down take pipes, valley gutter, m20 hex nuts,) structural rails, reinforcement bar, wooden, gi sheets/pipes,mangalore tiles,, flooring(pcc), brick masonary, stone masonary, rcc/pre cast slab/reinforcement,etc. remark :-1. the delivery will be made on as is where is basis and by lot basis. the items mentioned in the description only will be delivered. 2. lot is approachable by kutcha/pucca road.3. lot number is exhibited/painted on the structure.4. the quantity is worked out on approximate basis.5. the delivery will be made on lot basis and no part delivery will be allowed.6. materials like electric wires, fittings & cables and other such kind of materials. available inside the building/structure which is not within the scope of lot description, shall be handed over by the purchaser to custodian. 7. the items used in fencing around the structure such as rail, tie bar, jali, stone, bricks, wooden pillar or any other items and similar type of material lying nearby the structure/lot will not be delivered.8. dismantling& cutting is allowed for easy loading purpose at the risk & cost of the purchaser. dismantling is permitted upto ground level only 9. the purchaser should ensure that during dismantling & cutting operation no nearby structure/building should be affected and take necessary care/safety precautions to avoid any mishap as well as damage to railway property. 10. the purchaser will be fully responsible for his labours if any accident/unusual incident occurs at worksite/place during dismantling. extra precaution to be taken if there are trees near the structure or its branches are spread over the same. 11. after complete removal of rcc/bricks/rubble masonry and rubbish from the site, delivery of other items will be permitted and the land should be cleared of all debris before completion of delivery. 12. purchaser should personally visit the site and the see the lot in regard to loading/lifting. no claim will be entertained after sale of lot. 13. only structural rails will be delivered. other type of rails will not be delivered. 14. lot is ok for sale with above observations. stock holder :- sse( work)igp ,qty:- 1.0 by lot

CTN :44345613

30 Apr, 2026 3.5 Thousand

Bengaluru - Karnataka

Tender For corrigendum : procurement of machinery and equipment - inside caliper (divider)150, machine .brushes., bench. brushes., file,brushes., hacksaw .frame fixed 300mm., needle .file set., knurling .tool straight & diamond cut., hss .centre drill dia 8 mm., hss .centre drill dia 3.0 mm., hss .counter sink bit 120 degree., hss die .m4 - m12 with die stock., hss drill bit .straight shank dia 3 to 12 mm (step of 0.5 mm) (set)., goose neck .clamp set., strap .clamp set., machine .vice 150 mm (drilling)., self centering drill chuck 12 .mm., bench .grinder., dia .indicator - 0.01mm with styallus (needle type)., radius .gauge from 7.5 -15mm., thread .pitch gauge metric & inches., surface .plate granite 600 x 600 x 80 mm with stand., number .punch 5 mm set., pillar drilling. machine., cnc .simulators., outside .caliper (divider) 150, hammer .cross peen 0.75 kg with handle, flat .chisel, hss hand .hacksaw blade 18 tpi, magnetic .v block, rotary .table, sleeves .mt 3, sleeves .mt 2, sleeves .mt 1, materail .handling equipment, feeler .gauge 0.05 to 1.0 mm, radius .gauge upto 7mm, vernier .bevel protractor, universal .magnetic dial stand, outside .micrometre 25-50 mm, outside .micrometre 0-25 mm, dial .vernier 150 (0.02 lc), digital .vernier 0 - 150 mm, vernier .caliper 0 - 200 mm, vernier .caliper 0 -150 mm, vernier .height gauge 300 mm, center .punch, scriberr, try .square 4 inch blade, divider .spring type -150 mm, cnc cylindrical grinding machine., tool presetter , hydraulic vice - l- 525 x w- 108 x 135mm , opend 175mm, lathe dog carrier - bent tail 2 , lathe dog carrier - straight tail 2 , inserts type shell end mill dia 63mm with inserts (30nos.) 3 box., solid carbide end mill four flute dia 12mm , solid carbide end mill four flute dia 10mm , solid carbide end mill four flute dia 8mm , solid carbide end mill four flute dia 6mm , solid carbide end mill four flute dia 5mm , solid carbide end mill four flute dia 4mm , ball peen hammer 250 gms & 500 gms, warding file smooth 6 , knife edge file smooth 6 , knife edge file smooth 8 , knife edge file second cut 6 , knife edge file second cut 8 , knife edge file second cut 10 , half round file smooth 6 , half round file smooth 10 , half round file second cut 6 , half round file second cut 10 , half round file second cut 12 , half round file bastard 12 , round file smooth 6 , round file smooth 10 , round file second cut 6 , round file second cut 8 , round file second cut 10 , round file second cut 12 , round file bastard 12 , triangular file smooth 6 , triangular file smooth 8 , triangular file second cut 6 , triangular file second cut 8 , triangular file second cut 10 , triangular file bastard 10 , square file smooth 6 , square file smooth 8 , square file second cut 6 , square file second cut 8 , square file second cut 10 , square file bastard 12 , hand file second cut file 10 , flat file rough 12 , flat file smooth 8 , flat file smooth 10 , flat file second cut 8 , flat file second cut 10 , flat file second cut 12 , flat file bastard 12 , convex milling cutter dia 63 x 6 radius x bore size dia 27 mm., concave milling cutter dia 63 x 6 radius x bore size dia 27 mm., t slot cutter with parallel shank dia 17.5x8mm width shank dia 8mm, hss parallel shank end mill dia 16 four flute, hss parallel shank end mill dia 12, hss parallel shank end mill dia 10, hss parallel shank end mill dia 8, hss parallel shank end mill dia 6, hss tool bit 1 x 1 x 6 - 8% cobolt, hss tool bit 3/4 x 3/4 x 6 - 8% cobolt, hss tool bit 1/2 x 1/2 x 6 - 8% cobolt, hss tool bit 1/4 x 1/4 x 6 - 8% cobolt, flat slab oil stone 25 x 52 x 150 mm, hss centre drill dia 4.0 mm, hss machine reamer ( straight shank)dia 6 - 10 mm., hss hand reamer with wrench - dia 6 - 10 mm, power hacksaw machine with blade (10nos.)., hss tap set for size m4 - m12 with wrench (set) & core drills for the above tap set, taper shank hss drill dia 20mm, taper shank hss drill dia 16mm, taper shank hss drill dia 14mm, clamp c 10 , clamp c 5 , too

CTN :43994934

07 May, 2026 12.74 Crore

Gandhinagar - Gujarat

Tender For corrigendum : invites for e-bids. from original equipment manufacturers (oems) and/or authorised channel partners (cps) supply of goods, tools &equipmentforan international standard itotin wireman tradeat iti kubernagar, gujarat, india - low voltage control and systems., residential and small business systems, electrical machine trainer, motor-generator (ac to dc), motor generator (dc to ac) set, linear i.c. trainer, digital i.c. trainer, grid connected industrial photovoltaic training system three phase system, component of typical small hydro power, component of typical water mill, off-grid photovoltaic training system with solar pump system single phase system, building control systems and automation, industrial control system and automation, 20 kv voltage distribution and grid control system, testing lab, ar-vr training set up., portable electric drill machine, pillar electric drill machine, outside micrometer, motorized bench grinder, rawl plug tool & bit, hydrometer, thermometer, soldering iron, copper bit soldering iron, de soldering gun, table vice, ohm meter; series type & shunt type, stock and dies conduit, multi meter (analog), digital multi meter, a.c. voltmeter, milli voltmeter, d.c. milliammeter, ammeter, a.c. ammeter, a.c. ammeter, kilo wattmeter, a.c. energy meter, power factor meter, frequency meter (analog + digital), tachometer with stopwatch, current transformer primary-, potential transformer, growler internal+ external, tong tester / clamp meter, megger, wheat stone bridge with galvanometer & battery 2 nos, earth tester, low voltage control and systems., residential and small business systems, electrical machine trainer, motor-generator (ac to dc), motor generator (dc to ac) set, linear i.c. trainer, digital i.c. trainer, grid connected industrial photovoltaic training system three phase system, component of typical small hydro power, component of typical water mill, off-grid photovoltaic training system with solar pump system single phase system, building control systems and automation, industrial control system and automation, 20 kv voltage distribution and grid control system, testing lab, ar-vr training set up., portable electric drill machine, pillar electric drill machine, outside micrometer, motorized bench grinder, rawl plug tool & bit, hydrometer, thermometer, soldering iron, copper bit soldering iron, de soldering gun, table vice, ohm meter; series type & shunt type, stock and dies conduit, multi meter (analog), digital multi meter, a.c. voltmeter, milli voltmeter, d.c. milliammeter, ammeter, a.c. ammeter, a.c. ammeter, kilo wattmeter, a.c. energy meter, power factor meter, frequency meter (analog + digital), tachometer with stopwatch, current transformer primary-, potential transformer, growler internal+ external, tong tester / clamp meter, megger, wheat stone bridge with galvanometer & battery 2 nos, earth tester

CTN :43994951

07 May, 2026 13.98 Crore

Gandhinagar - Gujarat

Tender For corrigendum : invites for e-bids.from original equipment manufacturers (oems) and/or authorised channel partners (cps)supply of goods, tools & equipment foran international standard itotin operator advanced machine tools(oamt) tradeat iti suart, gujarat, india - surface grinding machine, cnc machining centre, cnc milling tools for above machine, cnc turn centre, edm, cnc simulator, vertical-spindle five-axis machining centres, cnc tool pre setter, ss and sc centre lathe (all geared) with having minimum specification, universal milling machine with minimum specification, horizontal milling machine with minimum specification, vertical milling machine, universal tool and cutter grinding machine, cnc lathe machine, tool holders to suit the cnc turn centre, jig boring, gear hubber, gear shaper machine, power saw machine-hydraulic feed system, cylindrical grinder, power saw machine, pedestal grinder double end type., radial drill motorized with tapping attachment, drilling machine pillar type with drill chuck & key., slotter, double column planer, shaping machine, shaping machine, co-ordinate measuring machine, cnc wire cut edm (electrical discharge machining), special tools and equipment, involutes gear module, surface plate, marking table, scribing block universal, v-block, combination set, spanner double ended metric, adjustable spanner, reduction sleeve morse taper, angle plate adjustable, oil stone, number drill h.s.s(parallel shank), drill (parallel shank), twist drills, drill chuck, centre drill, grinding wheel dresser(diamond), grinding wheel dresser hunting type, surface grinding machine, cnc machining centre, cnc milling tools for above machine, cnc turn centre, edm, cnc simulator, vertical-spindle five-axis machining centres, cnc tool pre setter, ss and sc centre lathe (all geared) with having minimum specification, universal milling machine with minimum specification, horizontal milling machine with minimum specification, vertical milling machine, universal tool and cutter grinding machine, cnc lathe machine, tool holders to suit the cnc turn centre, jig boring, gear hubber, gear shaper machine, power saw machine-hydraulic feed system, cylindrical grinder, power saw machine, pedestal grinder double end type., radial drill motorized with tapping attachment, drilling machine pillar type with drill chuck & key., slotter, double column planer, shaping machine, shaping machine, co-ordinate measuring machine, cnc wire cut edm (electrical discharge machining), special tools and equipment, involutes gear module, surface plate, marking table, scribing block universal, v-block, combination set, spanner double ended metric, adjustable spanner, reduction sleeve morse taper, angle plate adjustable, oil stone, number drill h.s.s(parallel shank), drill (parallel shank), twist drills, drill chuck, centre drill, grinding wheel dresser(diamond), grinding wheel dresser hunting type

CTN :43994967

07 May, 2026 12.13 Crore

Gandhinagar - Gujarat

Tender For corrigendum : invites for e-bids. from original equipment manufacturers (oems) and/or authorised channel partners (cps) supply of goods, tools &equipmentforan international standard itotin electrician tradeat iti vyara, gujarat, india - electrical machine trainer suitable for demonstrating the construction and functioning of different types of dc machines and ac machines (single phase and three phases). should be fitted with friction brake arrangement, dynamometer, and instrument panel and power supply unit., motor-generator (ac to dc) consisting of: squirrel cage induction motor with star-delta starter and directly coupled to dc shunt generator and switch board mounted with regulator, air breaker, ammeter, voltmeter, knife blade switches and fuses, set complete with case iron and plate, fixing bolts, foundation bolts and flexible coupling. induction motor rating: dc shunt generator rating: induction motor rating: dc shunt generator rating:, motor generator (dc to ac) set consisting of-shunt motor with starting compensator and switch directly coupled to ac generator with exciter and switch board mounted with regulator, breaker, ammeter, voltmeter frequency meter, knife blade switch and fuses etc. set complete with cast iron bed plate, fixing bolts, foundation bolts and flexible coupling. shunt motor rating: ac generator rating:, linear i.c. trainer, digital i.c. trainer, component of typical small hydro power, component of typical water mill, low voltage control and systems. with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, residential and small business systems with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, building control systems and automation with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, industrial control system and automation with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, solar system lab suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, training system predictive maintenance and condition monitoring of electric drives, electric vehicle motors and battery training & test bench, industrial electrical testing facility with circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the testing by the student, ar-vr training set up., portable electric drill machine, pillar electric drill machine, outside micrometer, motorized bench grinder, rawl plug tool & bit, hydrometer, thermometer, soldering iron, copper bit soldering iron, de soldering gun, table vice, ohm meter; series type & shunt type, stock and dies conduit, multi meter (analog), digital multi meter, a.c. voltmeter, milli voltmeter, d.c. milliammeter, ammeter, a.c. ammeter, a.c. ammeter, kilo wattmeter, a.c. energy meter, power factor meter, frequency meter (analog + digital), tachometer with stopwatch, current transformer primary-, potential transformer, growler internal+ external, tong tester / clamp meter, megger, wheat stone bridge with galvanometer & battery 2 nos, earth tester, electrical machine trainer suitable for demonstrating the construction and functioning of different types of dc machines and ac machines (single phase and three phases). should be fitted with friction brake arrangement, dynamometer, and instrument panel and power supply unit., motor-generator (ac to dc) consisting of: squirrel cage induction motor with star-delta starter and directly coupled to dc shunt generator and switch board mounted with regulator, air breaker, ammeter, voltmeter, knife blade switches and fuses, set complete with case iron and pl

Central Government/Public Sector

CTN :44721007

01 May, 2026 35.99 Lacs

Cuddapah - Andhra Pradesh

Tender For corrigendum : tender for supply of wall painting with acrylic emulsion paint , providing and applying white cement based , finishing walls with acrylic smooth exterior paint , 15 mm cement plaster , neat cement punning , providing and fixing bright finished brass hanging type floor door stopper , painting with synthetic enamel , applying one coat of water thinnable cement primer , 6mm cement plaster , providing and fixing ist quality ceramic glazed wall tiles , white washing with lime , clearing and stripping the site , supply and transport of earth , earth work in excavation , providing and laying in position specified grade of pcc , providing and laying in position specified grade of reinforced cement concrete , steel reinforcement , centering and shuttering , structural steel work riveted , providing and fixing isi marked flush door shutters , providing and fixing concertina coil fencing , with gi barbed wire , providing and fixing gi chain link fabric , removal of wet dry sludge , removal of existing damaged glass , welding by gas or electric plant , removal of existing damaged door , dismantling colour coated roofing sheets , rectifying all defects causing leakage in pre coated iron profile roofing sheets , providing and fixing precoated galvanised iron profile sheets , demolishing rcc work by mechanical means , supplying and applying bituminous solution primer , random rubble masonry , brick work with common fly ash bricks , providing and injecting chemical emulsion , half brick masonry , providing and fixing white vitreous china pedestal type water closet , providing and fixing wash basin , providing and fixing beveled edge mirror , providing and fixing cp brass bib cock , providing and fixing cp brass stop cock , providing and fixing water closet squatting pan , providing and laying ceramic glazed floor tiles , providing and fixing on wall face un plasticised rigid pvc swr pipes , providing and placing on terrace polyethylene water storage tank , providing and fixing inposition collapsible steel shutters , providing and fixing ptmt pillar cock , providing and laying bituminous concrete , sub-base course , base course , providing and fixing brass 100mm mortise latch an dlock with 6 levers , developing lawn , 30 mm thick factory made polyvinyl chloride , providing and fixing gi chain link fabric , do gi pipe 25m dia , 32 mm dia nominal bore , 50 mm dia nominal bore , providing and fixing false ceiling , supplying and filling in plinth , providing and laying dampproof course , finishing with epoxy paint , providing fixing glass panes , providing and laying vitrified floor tiles , providing and laying polished granite stone , providing and fixing stainless steel , providing and fixing stainless steel 24 inch towel rod , providing and fixing of overhead shower , providing and fixing of shower arm casted chrome , providing and fixing with all fittings of angle cock , providing and fixing with all fitting of two way bib cock , providing and fixing with all fitting of float valve , constructing masonry chamber , dry stone pitching , providing and fixing gun metal gate valve , providing and laying 60mm thick faciory made cement concrete interlocking paver block

Central Government/Public Sector

CTN :44699142

30 Apr, 2026 38.82 Lacs

Cuddapah - Andhra Pradesh

Tender For corrigendum : tender for supply of wall painting with acrylic emulsion paint , providing and applying white cement based putty , finishing walls with acrylic smooth exterior paint , 15 mm cement plaster , neat cement punning , providing and fixing false ceiling. , providing and fixing bright finished brass hanging type floor door stopper , painting with synthetic enamel paint , 6mm cement plaster of mix , quality ceramic glazed wall tiles , white washing with lime , clearing and stripping the site , supply and transport of earth , earth work in excavation , providing and laying in position specified grade of reinforced , providing and laying in position specified grade , steel reinforcement for rcc , centering and shuttering , structural steel work riveted , providing and fixing isi marked flush door shutters , providing and fixing concertina coil fencing , with gi barbed wire , providing and fixing gi , removal of existing damaged glass , welding by gas or electric plant , removal of existing damaged doors , dismantling colour coated roofing , rectifying all defects causing leakage in pre coated , providing and fixing precoated galvanised iron profile sheets , providing & fixing uv stabilised fiberglass , demolishing rcc , supplying and applying bituminous , random rubble masonry , brick work with common fly ash , providing and injecting chemical emulsion , half brick masonry , providing and fixing white vitreous china pedestal type water closet , providing and fixing wash basin , providing and fixing , providing and fixing brass bib cock , providing and fixing brass stop cock , providing and fixing water closet squatting pan , providing and laying ceramic glazed floor tiles , providing and fixing on wall face un plasticised rigid pvc swr pipes , 30 mm thick factory made polyvinyl chloride , providing and placing on terrace polyethylene water storage tank , providing and fixing chlorinated polyvinyl chloride , do cpvc pipe 20m , do cpvcpipe 25m dia , grading roof for water proofing treatment , providing and fixing gi pipes , do gi pipe 20m dia , do gipipe 25m dia , do gi pipe 40m dia , providing and fixing ptmt pillar cock , providing and fixing hydraulic door closer , providing and fixing brass , cleaning of existing manholes , dry stone pitchinge. , providing and fixing gun metal gate valve , providing and fixing gun metal gate valve , providing and laying 60mm thick faciory

CTN :44712528

17 Apr, 2026 15.00 Lacs

Garhwal - Uttarakhand

Tender For purchase of plumbing and carpenter items - socket 15 mm, socket 20 mm, socket 25 mm, socket 32 mm, socket 40 mm, socket 50 mm; elbow 15 mm, elbow 20 mm, elbow 25 mm, elbow 32 mm, elbow 40 mm, elbow 50 mm; nipple 15 mm, nipple 20 mm, nipple 25 mm, nipple 32 mm, nipple 40 mm, nipple 50 mm; tank nipple 15 mm, tank nipple 20 mm, tank nipple 25 mm; union 15 mm, union 20 mm, union 25 mm, union 32 mm, union 40 mm, union 50 mm; tee 15x15 mm, tee 15x20 mm, tee 20x20 mm, tee 32x15 mm, tee 40x15 mm, tee 50x15 mm, tee 20x25 mm, tee 20x32 mm, tee 20x40 mm, tee 20x50 mm, tee 25x20 mm, tee 25x25 mm, tee 25x32 mm, tee 25 x 40 mm tee, 25 x 50 mm tee, 32 x 32 mm tee, 32 x 40 mm tee, 32 x 50 mm tee, 40 x 20 mm tee, 40 x 25 mm tee, 50 x 40 mm tee; reducer 15 x 20 mm, reducer 20 x 25 mm, reducer 25 x 32 mm, reducer 32 x 40 mm, reducer 50 x 40 mm; plug 15 mm, plug 20 mm, plug 25 mm, plug 32 mm, plug 40 mm, plug 50 mm; gate valve 15 mm, gate valve 20 mm, gate valve 25 mm, gate valve 32 mm, gate valve 40 mm, gate valve 50 mm, gate valve 100 mm; die set 15 x 25 mm, die set 25 x 50 mm; short-body tap, long-body tap; hacksaw frame, hacksaw blade; angle cock, pillar cock; pvc pipe, pvc pipe washer; ball; ball cock set 20 mm, ball cock set 15 mm, ball cock set 25 mm, ball cock set 32 mm; waste pipe; water tank. 500-liter sintex quality tank, 1000-liter sintex quality tank, 2000-liter sintex quality tank, 5000-liter sintex quality tank, iron hooks, blue lamps, packets of thread, water pumps (1/2 hp, 1 hp), rubber pipes (1/2 inch, 3/4 inch, 1 inch), large superior-quality wash basins, superior-quality cisterns, pipe wrenches (10-inch, 12-inch, 14-inch, 18-inch, 24-inch, 36-inch), 15mm plastic pipes, 15mm plain plastic elbow sockets, 15mm plain plastic sockets, 15mm plastic phenyl sockets, 15mm plastic phenyl tees, 15mm plastic unions, plastic clamps, 15mm plastic male sockets, 15mm plastic phenyl elbows, solan adhesive (50g, 100g, 250g), 32mm tank nipple nuts, high-quality raincoats, plastic wall plugs (gittis), vices, white paste, water cooler tees, clamps (15-inch, 20-inch, 25-inch, 32-inch, 40-inch, 50-inch), large superior-quality hammers, small superior-quality hammers, chisels (small and large), trowels, superior-quality pliers, superior-quality screwdriver sets, pincers, tool kits/bags. drilling machine (superior quality), small cutter machine (superior quality), large cutter machine (superior quality), electric saw (superior quality), electric planer (superior quality), wood plane, chisel, try square, triangular square, screwdriver, sharpening stone, glass cutter, aluminum sheet, plywood (12 mm), plywood (10 mm), plywood (6 mm), nails (2.5 inch), nails (2 inch), nails (1.5 inch), screws (35x8), large sink strainer, washbasin strainer, iron hooks, fevicol, small screwdriver, large screwdriver, allen key set, plastic push-cock tap (15 mm), door stopper, door closer, g.i. pipe (15 mm), g.i. pipe (20 mm), g.i. pipe (25 mm), g.i. pipe (32 mm), g.i. pipe (40 mm), g.i. pipe (50 mm), flush door, plastic pipe (1 inch), curtain fabric, curtain rings, red clamps, red finials, door pulls (8 inch), door pulls (12 inch), steel handles (6 inch), steel handles (4 inch), aluminum handles (10 inch), door bolts (8 inch), door bolts (6 inch), hinges (3 inch, 4 inch), hinges (5 inch), door catches (6 inch, 3 inch), screws (no. 8, 3/4 inch), screws (no. 35, 1.5 inch), screws (25x8), screws (25x6), screws (50x8), screws (2 inch, 3 inch), full-thread screws. 1.5-inch nut & bolt; 2-inch, 3-inch nut & bolt; steel towel rod; round steel towel rod; l-type hook plate; golden rod; cherry rod; 4-foot mosquito mesh; 3/4-inch black nail; mesh cutting shears; wooden beading; black window beading; white window beading; 6mm plywood (4x8 ft); 8mm plywood (4x8 ft); 10mm plywood (4x8 ft); 12mm plywood (4x8 ft); 19mm plywood (4x8 ft); 22mm plywood (4x8 ft); bathroom mirror (1x2 ft); hanger; gold wall-to-wall carpet; red wall-to-wall carpet; gold clamp; 3-meter measuring tape;

Central Government/Public Sector

CTN :44696083

09 Apr, 2026 NA

Kurla - Maharashtra

Tender For auction sale of others - dismantlig of abandoned/condemned rcc over head tank at special repair.cdo/ltt diesel engine cutting yard,kurla and sse/wks/ltt special repair office premises. remarks - 1. lot is approachable by pakka road. 2. the delivery will be made on as is where is basis and by lot basis. the items mentioned in the description only will be delivered. 3. lot number is exhibited/painted on the structure. 3. the quantity is worked out on approximate basis. 4. the delivery will be made on lot basis and no part delivery will be allowed. 5 materials like electric wires, fittings & cables and other such kind of materials. available inside the structure which is not within the scope of lot description, shall be handed over by the purchaser to custodian.6. the items used in fencing around the structure such as rail, tie bar, jali, stone, bricks, wooden pillar or any other items and similar type of material lying nearby the structure/lot will not be delivered.7. dismantling& cutting is allowed for easy loading purpose at the risk & cost of the purchaser 8. dismantling is permitted uptoground level only.9. the purchaser should ensure that during dismantling & cutting operation no nearby structure/building should be affected and take necessary care/safety precautions to avoid any mishap as well as damage to railway property. there is movement of vehicles and humans near the tanks. purchaser should barricade the location before dismantling/breaking of tanks.10. the purchaser will be fully responsible if any accident/unusual incident occurs at worksite/place during dismantling. 11. extra precaution to be taken if there are trees near the structure or its branches are spreadover the same.13. train operations and other railway work should not be disturbed/affected.14. after complete removal of pcc/bricks/rubble masonry and rubbish from the site, delivery of other items will be permitted and the land should be cleared of all debris before completion of delivery.15. the list & location of rcc tanks are available with stockholder. 16.the purchaser is advised to see the lot site and units before bidding. stock holder- sse(works) cla. qty-1.0 bylot.

Coping Stone Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector