Latest copper contact Tenders | Government copper contact Tenders

Central Government/Public Sector

CTN :43039170

17 Dec, 2025 NA

Kota - Rajasthan

Tender For supply of joint less hard drawn grooved copper contact wire 107 sq.mm made out of continuous cast copper wire rods in non returnable wooden drum, as per rdso specification no. ti/spc/ohe/cw/0971 with latest amendment.note- material to be procured from rdso approved sources only rdso item id-3100606)

Central Government/Public Sector

CTN :43039171

17 Dec, 2025 NA

Kota - Rajasthan

Tender For supply of jointless grooved hard drawn copper contact wire 107 sq mm made out of continuous cast copper wire rods in non returnable wooden drum. as per rdso spec. no. ti/spc/ohe/cw/0971or latest. make rdso approved vendor.note-material to be procure through rdso approved sources only. rdso item id 3100606.

Central Government/Public Sector

CTN :43039172

17 Dec, 2025 NA

Kota - Rajasthan

Tender For supply of jointless grooved hard drawn copper contact wire 107 sq mm made out of continuous cast copper wire rods in non returnable wooden drum length should not be less than 1500mtrs and balanced qty. in one drum. as per rdso spec. no. ti/spc/ohe/cw/0971or latest. make rdso approved vendor. ( material to be procured from rdso approved sources only.)rdso item id 3100606

Central Government/Public Sector

CTN :43040663

02 Jan, 2026 NA

Avadi - Tamil Nadu

Tender For supply of jointless grooved copper contact wire 107 sq.mm.

Central Government/Public Sector

CTN :42906765

24 Dec, 2025 NA

Belagavi - Karnataka

Tender For corrigendum : supply of joint less hard drawn grooved copper contact wire

Central Government/Public Sector

CTN :42934856

08 Dec, 2025 NA

Fatehpur-Up - Uttar Pradesh

Tender For supply of supply and supervision of etc of 765kv isolator d d - supply 765kv 3150a 50ka for 1s 3ph db vertical knee type individual pole motor operated electrically ganged isolator with 1es individual pole motor operated electrically ganged as per ts , supply 765kv 3150a 50ka for 1s 3ph db vertical knee type individual pole motor operated electrically ganged isolator with 2es individual pole motor operated electrically ganged as per ts , supply 765kv 3150a 50ka for 1s 1ph db vertical knee type isolator motor operated with 1es motor operated along with operating mechanism as per ts , supply 765kv 3150a 50ka for 1s 1ph db vertical knee type isolator motor operated without earth switch as per ts , spares isolator 765kv 3150a 50ka for 1s hdb vertical knee type isolator one complete pole with 2es along with operating mechanism as per ts , spares isolator 765kv 3150a 50ka for 1s hdb vertical knee type isolator one complete pole with 1es along with operating mechanism as per ts , spares isolator 765kv 3150a 50ka for 1s hdb vertical knee type isolator one complete pole without es along with operating mechanism as per ts , spares isolator 765kv 3150a 50ka for 1s isolator arms with finger contacts and current carrying assembly , spares isolator 765kv 3150a 50ka for 1s hdb vertical knee type isolator copper contact fingers for female and male contacts for one pole , spares isolator 765kv 3150a 50ka for 1s horizontal db hdb vertical knee type isolator open close contactor assembly timers key interlock push button switch and auxiliary switches , spares isolator 765kv 3150a 50ka for 1s horizontal db hdb vertical knee type isolator limit switch , spares isolator 765kv 3150a 50ka for 1s motor housing bearing assembly , spares isolator 765kv 3150a 50ka for 1s horizontal db hdb vertical knee type isolator terminal pads , spares isolator 765kv 3150a 50ka for 1s motor with gear assembly and bevel gear assembly , spares isolator 765kv 3150a 50ka for 1s horizontal db hdb vertical knee type isolator corona shield rings , spares isolator 765kv 3150a 50ka for 1s hinge pin , spares isolator 765kv 3150a 50ka for 1s bearings , spares isolator 765kv 3150a 50ka for 1s interlocking coil with resistor , spares isolator 765kv 3150a 50ka for 1s fuses of each rating , services isolator 765kv supervision of erection testing and commissioning including alignment check of 3ph horizontal db hdb type isolator , services isolator 765kv supervision of erection testing and commissioning including alignment check of 1ph db vertical knee type isolator

State Government

CTN :42850734

04 Dec, 2025 30.00 Lacs

Morena - Madhya Pradesh

Tender For rate contract for supply of local purchase safety appliances material under jurisdiction of general manager (oandm) mpmkvvcl,morena - tools (1 no. cutting plier, 1 no. screw driver 12 inch., 1 no. screw driver 8 inch. and 1 no neon tester), line man discharge road 6 feet long bamboo with 2.5 sqmm copper wire 6 mtr length fixed at top of bamboo 3 type copper strip size 173x19x3, safety helmet, rubber hand gloves size 14 (355mm) joint less dully tested up 17000 volt and working potentials 7500 volt as per iss no. 4770-1991 make crystal, rechargeable torch with 6 to 6.5 volt battery charger supply ac 240 watt, aluminum lugs suitable for 50 sq.mm cable . as per is 8309, aluminum lugs suitable for 70 sq.mm. cable as per is 8309, aluminum lugs suitable for 120 sq.mm. cable as per is 8309, aluminum lugs suitable for 150 sq.mm, aluminum lugs suitable for 185 sq.mm, aluminum lugs suitable for 300 sq.mm, chain pully block capacity (2 ton), chain pully block capacity (3 ton), chain pully block capacity (5 ton), 11kv do fuse elements 3 amp as per iss-9385, 11kv do fuse elements 5 amp as per iss-9385, 11kv do fuse elements 10 amp as per iss-9385, 11kv do fuse elements 15 amp as per iss-9385, flood light of 200 watt(complete) make-sharp with 2 year replacement guaranty & pipe / clamps suitable for pole mountin, hand operating crimping tool suitable for crimping of aluminium copper lugs from 25 sq. mm to 300 sq. mm with changeable dies, led street light of 48-50 watt (complete) make-sharp with 2 year replacement guaranty & pipe /clamps suitable for pole mounting, manual pole pruner longth 6.5 m extendable length 2362-6500 mm length adjustable 75 stage with 16" curved tooth saw weight 2.55 kg., ct clamp suitable for 16 mm dia brass stud aluminum portion filled with 4 nos. gi bolt & nuts with spring and plain washer clamp suitable for ascr conductor (weight 422 gram), insulated neon tester make- venus/is standard, raincoat (rubberisied) with cap make duckback, bi-metallic clamp suitable for 315, 200, kva x-mer flat brass size 60x60x10 mm in central 20 mm hole having joint aluminium section size 60x70x42mm suitable for 150 sq .mm cable 06 no. gi nut & bolt flat and spring washer weight 0.900 gram (approx+-5), bi-metallic clamp suitable for dtr brass pad 50x50x6 mm with 20 mm hole fitted in aluminium portion size 70x40x40mm fixing with 06 no. gi nut & bolt weight 0.600 gram, bamboo ladders 24 (feet) long approx having 2 to 3 dia at the bottom and 1.5 to 2.5 at top of bamboo the cross piece i.e. 16 no. step should be at a distance of approx 17 and bamboo ladder should be tightened with g.i. wire of 16 swg at least 4 places the top of ladder should be wide 35 to 40 cm and bottom 58 to 60 cm, poly propylene rope 24 mm dia make tuff rope/equivalent standered make with isi mark., piercing connector type i for single phase/three phase suitable for 70-150 sq.mm cable, gum boots suitable for 200 c and upto 560 double density sole shoes height 15 inches (size 8 no.), gumboots suitable for 200 c and up to 560 c double density sole shoes heights 11 inches ( size 9 no.), tc fuse wire 14 swg as per is 8130:1984, tc fuse wire 16 swg as per is 8130:1984, hrc fuse base 250 amp with copper contact.173x19x3, hrc fuse base 400 amp with copper contact, hrc fuse link 400 amp suitable for 400 amp hrc fuse base as per ice/isi standard., hrc fuse link 400 amp suitable for 400 amp hrc fuse base as per ice/isi standard., screw driver insulated plastic handle blade length 250mm (10 inch) make- venus/is standard, screw driver insulated plastic handle blade length 200mm (8 inch) make- venus/is standard, insulated cutting plier 8 (inch). make tapariya, venus, jhalani or other euqivalent is standard, insulated fiber discharge rod 18 feet long extention section with alluminium c type clamp with wire

Central Government / Public Sector

CTN :42866095

15 Dec, 2025 NA

Vijayawada - Andhra Pradesh

Tender For "design, supply, erection, testing and commissioning of 25kv,50hz, single phase ac traction overhead equipment with 65sq.mm caternary wire and 107sq.mm hdg copper contact wire, lt supply transformer stations including modifications to the existing ohe in connection with proposed bye pass line with ror between mustabada (mbd) and rayanapadu (ryp) - (balance works) in vijayawada division of south -central railway" reg.

Central Government / Public Sector

CTN :42764468

08 Dec, 2025 NA

Guntakal - Andhra Pradesh

Tender For cumi flex unitized wheel of size: 150x25x16 - 3 svf (polishing pad) or similar in other makes for polishing copper contacts. note: one sample should be got approved before effecting bulk supply.

Central Government/Public Sector

CTN :42797795

09 Dec, 2025 NA

Ratlam - Madhya Pradesh

Tender For supply item description: hard drawn grooved copper contact wire jointless, 107 sqmm

Copper Contact Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors