Latest copper sleeve Tenders | Government copper sleeve Tenders

Central Government/Public Sector

CTN :38208007

25 Nov, 2024 NA

Chennai - Tamil Nadu

Tender For supply of heat shrinkable sleeve 12.7 mm to icf/edml - 101, rev.0, item no. 5. makes - mv, panduit, pep charles, tyco, brady, partex, phoenix only accepted. oem or their authorized dealers only to quot e with documentary evidence. material should be supplied in red and blue colour in equal quantities. [ war ranty period: 12 months after the date of delivery ]

Central Government/Public Sector

CTN :38049953

23 Nov, 2024 NA

Panipat - Haryana

Tender For corrigendum : supply of end labyrinth sleeve for ugb-401 as per drawing no: m u-070; material: aisi304(forged) , shaft sleeve interstage for ugb-401 as per drawing no: m-u-068; material: aisi304(forged) , balance piston for ugb-401 as per drawing no: ur-m-066; material: aisi-304(forged)

Central Government/Public Sector

CTN :37700491

16 Nov, 2024 NA

Koraput - Odisha

Tender For bid to ras corrigendum : supply of machining of 41 lines of components with hal material - pin , nipple , dowel bolt , flange , pin , boss , boss , bush , bush , bush , bush , bush , casing , injector , nut , ring , nipple , ring , sealing ring , casing , sleeve , bush , bush , bush , bush , bush , casing , bush , bush , bush , bush , bush , bush , bush , lever , cover , rocker , pin , flange , jet , bracket

Central Government/Public Sector

CTN :38184951

02 Dec, 2024 NA

Raigad - Maharashtra

Tender For supply of 300067498 , 310022341 , 300089748 , 300023095 , 310022365 , 310022364 , 300120574 , 300152952 , 300152953 , 300152954 check valve swing type, size: 6" 150#, raised face flanged ends, material: body sa216 gr. wcb, seat sa 105 and 13% cr faced, disc sa216 gr. wcb and 13 % cr faced, hinge pin 13% cr, body to bonnet connection bolted, face to face dimension as per asme b16.10, flanges and drilling as per asme b16.5, valve testing as per api598., gate valve,rising stem,flexible disc,material:body astm a216wcb,disc a 216 wcb with 13% chrome facing, size 8",#150,end connection:flanged ised face as per ansi b16.5.design standard:api 600,inspection & testi ng as per api 598., gate valve with bolted bonnet, outside screw & yoke; size: 6" nb x 150#; ends: flanged (raised face serrated) moc: (1) body & bonnet: astm a 216 gr wcb, (2) stem: astm a182 gr. f6a, (3) seat ring: astm a 105 + hardfaced with stellite #6 (api trim #5), (4) disc / wedge : astm a 216 gr wcb + hardfaced 13% cr steel (api trim #5), (5) bonnet gasket: spirally-wound ss 304 with graphite filler, (6) yoke sleeve: astm a439 type d2 (7) gland & gland bush: astm a 105. (8) stem packing: graphite with braided end rings, (9) back seat: hardfaced 13% cr steel (api trim #5), (10) bonnet bolts & nuts: astm a 193 gr b7 & astm a 194 gr 2h, (11) gland bolts / eye bolts & nuts: astm a 193 gr b7 & astm a 194 gr 2h; (12) hand wheel : ductile iron. compliance standards: design standard: api 600; face to face dimensions: as per ansi b16.10; flange drilling:as per ansi b 16.5; pressure & temperature rating

Central Government/Public Sector

CTN :38185152

03 Dec, 2024 NA

Raigad - Maharashtra

Tender For supply of 300067732 , 300023106 , 300023108 , 300099954 , 300099953 , 300099955 gate-valve,solid wedge rising stem material body a105/disc-a182f6 ,800lbs,socket weld ,api 600,size 1/2" ,ibr quality., forged carbon steel gate valve, os&y type, standard port, hand operated size: 3/4" nb x 800 lbs; end connection: socket weld, as per ansi b 16.11 moc: (1) body & bonnet: astm a 105, (2) stem: astm a479-410 (13% cr ) hardened, (3) seat ring: astm a276 410 + stl-6, (4) disc / wedge :astm a 217-ca-15 / a182 f6a (13%cr) + stl-6, (5) yoke sleeve: astm a582 type 416 (6) bonnet gasket: spirally wound ss 304 with graphite filler, (7) gland flange: astm a 105 (8) gland bush: astm a276 type 410 (9) stem packing: graphite with braided end rings, (10) fasteners (bolts & nuts): astm a 193 gr b7 & astm a 194 gr 2h, compliance standards: design standard: api 602 / bs 5352; inspection and testing as per api 598 / bs 5352; note: 1. hydrostatic test certificate to be furnished alongwith supply. 2. valves to be supplied duly painted by al. paint of min. 40 micron dft & packed with proper plastic end protector., forged carbon steel gate valve, os&y type, standard port, hand operated size: 1" nb x 800 lbs; end connection: socket weld, as per ansi b 16.11 moc: (1) body & bonnet: astm a 105, (2) stem: astm a479-410 (13% cr)hardened, (3) seat ring: astm a276 410 + stl-6, (4) disc / wedge :astm a 217-ca-15 / a182 f6a (13%cr) + stl-6, (5) yoke sleeve: astm a582 type 416 (6) bonnet gasket: spirally-wound ss 304 with graphite filler, (7) gland flange: astm a 105 (8) gland bush: astm a276 type 410 (9) stem packing

Central Government/Public Sector

CTN :38171619

20 Nov, 2024 NA

Multi City - Multi State

Tender For supply of heat shrinkable sleeve od size 4.8 mm as per icf specification no. icf / edml-101, rev.0, it em no.2. makes acceptable: mv, panduit, pep charles, tyco, brady, partex, phoenix. (material shoul d be supplied in reel of 100 meters of red, yellow & blue color in equal quantities) oem or their authorized dealers only to quote with documentary evidence. [ warranty period: 24 months after the date of deliver y ]

Central Government/Public Sector

CTN :38173244

16 Dec, 2024 NA

Multi City - Multi State

Tender For supply of set of spares suitable for crimpwell make pinion mounting and dismounting for hhp tm as per the set details as follows 1) traction rod suitable for make crimpwell model no. htmdtr- 04 nos. 2) hex nut for traction rod suitable for make crimpwell model no. htmdhn-04 nos. 3) ss elbow adapter 3000 bar with gland nut and sleeve suitable for make crimpwell model no. htmdea -04 nos, 4) ss pinion adapter suitable f or make crimpwell model no. htmdpa-13 nos. material to be procured from oem and its authorized dealer o nly. [ warranty period: 30 months after the date of delivery ]

CTN :38137926

14 Nov, 2024 1.74 Crore

Ganganagar - Rajasthan

Tender For supply of spares of various pumps make sam turbo forahp (model: ar200/550, vw 150/340aars, chc 150/500 and 13md 80/205) installed at unit 1, 2 and 5 and ca(model ars 80/290 and tcnn 80/300) installed at unit 1 to 6, stps, suratgarh - , impeller for ist stage pump with nut (clockwise direction) part no. 18 a material, nihard type- iv, wear plate (bracket side) (part no.16, material:- nihard type- iv), wear plate (suction side) (part no. 19, material nihard type - iv, lantern ring (part no 13, material:- astm a743 cf 8m), oil level (seal) indicator part no 54 , material glass with brass, gland housing (part no. 9, material alloy ci), inner casing (part no. 17, material nihard type -iv), expeller [ part no:- 14, material:-nihard type-iv], liquid thrower (part no.11,material:- astma216 gr wcb, flange( suction cover), lock nut[ part no:- 47, material:-astm a216 gr wcb ], impeller for iind stage pump with nut (anti-clockwise direction) (part no. 18 b,, material:- nihard type -iv), shaft for i st pump with nut (clockwise direction) part no. :- 4, material :- bs 970 en8), brearing spacer (part no.7, material :- is 210 fg 200), shaft sleeve (part no. 12, material astm a 743 ca 15), shaft for iind stage pump with nut (anti-clockwise direction), outer bearing cap (part no.5 material :- is 210 fg 200), inner bearing cap (part no.6 material :- is 210 fg 200), gland ring (part no.:- 24 materail:- astm a 216 gr wcb), spring (part no.:- 41, material:- steel), brearing spacer (part no.7a, material :- is 210 fg 200), dome nut & t bolt, outer casing(bottom) & outer casing(top) (part no. 15 & 20 ) material is 210 fg 260, spring plate part no. 41 a material :- is 210 fg 260, complete bearing assembly (fitted with shaft & bearing etc.) for iind stage pump, spares of verticle pump model: vw 150/340a+ars unit 1, 2 & 5, ratchet collar part no. 53.852, material is 226 c15, circlip part no. 94.055, material steel, drive shaft (part no.22.352), meterial:-aisi 316, drive column pipe part no. 72.352, material erw ms c class, pump column pipe part no. 72.354, material erw ms c class, star support(part no.31.152, meterial:-is 210fg 200, bush bearing(pump/star) 1 set consist of each 1 setno.) (part no.:- 55.552 &, 55.553,meterial:-rub ms sleeve), impeller(part no.24.2, meterial:-nihard type-iv), wear plate(b.side ) (part no.:-14.53, meterial:-alloy ci), wear plate(s.side ) (part no.:-14.54), meterial:-alloy ci, inner casing part no. 11.23, material alloy ci, bearing collar part no. 53.952, material is 226 c15, bearing housing part no.36.052 meterial:- 210 fg 200 ), gland housing (part no. 46.3, material:- is 210 fg 200), pump shaft (part no. 22.3, material:-aisi316), coupling ring, coupling nut & coupling sleeve (part no. 87.053,87.052,87.452, material, :- aisi 316), ratchet pin (part no. 53.752), material aisi-410, bearing cap with ratchet part no. 37.052, material is 210 fg 260, lantern ring (part no 46.10), material:- bs 970 en-8, outer casing (b. side) part no. 11.25, material is 210 fg 260, outer casing (s. side) part no. 11.24, material is 210 fg 260, complete pump assembly with motor set, model vw 150/340a+ars, discharge cap, 225 m3/hr, head 20 m, size 150 x 150, rpm 1450, input power 30 kw, input voltage, 41510%, 50 hz, bare pump with base plate, coupling, column and delivery pipe,, strainer, adjusting screw part no. 91.19, material: is 1363 ms (1 set = 4 nos.), slurry pump model: ar200/550 (04 nos.) unit # 5 & 6, split gland, wear plate (b. side) 16, wear plate (s. side) 19, impeller with nut (clock wise direction with de) 18, lantern ring 13, suction cover 21, inner casing 17, shaft sleeve, dome nut & t bolt, spring, bearing spacer (1 set=2 nos), gland housing 09, bracket side cover 25, complete bearing assembly (fitted with shaft & bearing etc.), casing cover (part no. 17.3) mtl. is 210 fg 260 for sam make pump, model chc 150/500, pump shaft (part no. 22.3) mtl.aisi 410 for sam make pump model chc, 150/500, i

CTN :38138114

28 Nov, 2024 10.00 Lacs

Lucknow - Uttar Pradesh

Tender For supply of engine machine job - crank shaft allignments and grinding , 04 connecting rod alignment , 04 connecting rod bush fitting boring , cylinder head seat cutting , cylinder head valve guide fitting remering , cylinder head steel seat fitting , cylinder block sleeve fitting and checking , cylinder block and head checking for water ways and oil ways leakage , repair and service of self stater with material and labour charge , radiator cleaning and repair with material and labour charge , hydraulic pump repairing with material and labour charge , cleaning repair of hydraulic liftomatic with material and labour , fip and 04 injector nozzles overhauling with material and labour , complete alternator repair and service with material and labour , 06 connecting rod alignment , 06 connecting rod bush fitting and boring , cylinder head valve guide fitting and remering , cylinder block head checking for water ways oil ways leakage , repair and service of turbocharger with material and labour , fip and 06 injector nozzles overhauling with material labour , alternator repair service with material and labour charge , 04 connecting rod bush fitting and boring , cylinder head facing , fip and 04 injector nozzles overhauling with material labour , alternator repair and service with material and labour charge , cylinder block and head checking for water ways oil ways leakage new holland taractor crank shaft allignments and grinding , new holland taractor 04 connecting rod alignment, new holland taractor 04 connecting rod bid number/ ( ( ) ): gem/2024/b/5583564 dated/* : 07-11-2024 bid document/ 2 1 / 47

Central Government/Public Sector

CTN :37996860

15 Nov, 2024 NA

Panipat - Haryana

Tender For supply of spares of ksb make pumps - bearing housing part no 350 , stuffing box housing part no 451 , bearing cover pt no 360.1 and 360.2 , bearing housing 330 material c.i. , impeller part no 31 , press ring stuffing box part no 26a , bearing covers part no 360.01 moc cast iron , bearing bracket with both sides covers part nos 330 360.01 and 360.02 , bearing end cover part no 62 62.1 , circlip part no 932.5 , bearing bracket part no 330 , stuffing box housing part no 25 , wear ring impeller part no 23.1 , distance bush stage sleeve part no 521 mat ci , bearing end cover part no 427 , bearing end cover part no 324 , diffuser last stg partno 110 , seal cage ring part no 501 , wear ring part no 120 , stuffing box pressure ring part no 454 material cf8m , lantern ring part no 458 , shaft part no 210 material aisi 316 , shaft sleeve part no 524 material aisi 316

Copper Sleeve Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors