Latest core cutter drill machine Tenders | Government core cutter drill machine Tenders

Central Government/Public Sector

CTN :40324421

02 Jun, 2025 62.67 Lacs

Betul - Madhya Pradesh

Tender For corrigendum : drilling and grouting of roof bolts and jamming with resin capsule by using hydraulic roof (drill rod, drill bit and hy-draulic roof bolting machine provided by the contractor) bolting machine in lhd e9/e8 proposed depillaring panel of bagdona seam a

State Government

CTN :40279010

16 Jun, 2025 193

Bengaluru - Karnataka

Tender For e- tender for supply of spine, fms other implants high end - frame plate 3d (micro plates 0.2mm - 0.8mm), dermal matrix wound dressings size 10x25cm, dermal matrix wound dressings size 10x12.5 cm, dermal matrix wound dressings size 5x5 cm, jess fixators for hand fracture, suture anchors (for tendon achilles repair), rack for 8 instruments with clamp box, instrument case 130 x 230 x 25mm, micro scissors straight scissor blade 10mm, forceps with plateau tip 0.3mm smooth, micro forceps with plateau tip 0.6mm angulated, micro scissors curved - scissor blade 10mm, double clamps 24mm, 1.5 - 2.3mm vessel, double clamps 16mm, 1.0 - 2mm vessel, double clamps -11mm, 06-1.4mm vessel, single clamps 24mm, 0.6 - 1.4mm vessel, single clamps 16mm, 0.6 - 1.4mm vessel, microvascular single clamps 11mm, 0.6 - 1.4mm vessel, calcaneal fracture fixation plate and screws, lisfranc plate and screws, first 1st mtp fusion plate and screws, lapidus fusion plate and screws, mini tight rope for mallux valgus, ankle fusion plates, fibre wires, achilles tendon repair by speed bridge, foot plates, memory staples, tenodesis screws, syndesmosis repair with tight rope, suture anchors for brostrum repair, internal brace for brostrum repair, deltoid ligament repair using suture anchors, deltoid ligament repair with internal brace, autocart - all autologous cartilage regeneration, suture anchors for achilles tendon 5.5 mm double loaded with needles, extra osseous talotarsal stabilization (eotts) implant (sinus tarsi screw), screws for corresponding plate thickness of length 4mm, 6mm, 8mm, 10mm (large 2mm to 2.8mm), a)10 hole continuous plate (large 2mm to 2.8mm), a)6 hole with gap (large 2mm to 2.8mm), a)4 hole with gap (large 2mm to 2.8mm), a)3 hole with gap (large 2mm to 2.8mm), a)2 hole with gap (large 2mm to 2.8mm), h plate (large 2mm to 2.8mm), l plate right and left (large 2mm to 2.8mm), titanium strut plate 18 hole (large 2mm to 2.8mm), double y plate (large 2mm to 2.8mm), y plate (large 2mm to 2.8mm), a)20 holes adaptation plate (large 2mm to 2.8mm), screws for corresponding plate thickness of length 4mm, 6mm, 8mm, 10mm (medium plates 1mm-2mm), a)10 hole continuous plate (medium 1mm to 2mm), a)6 hole with gap (medium 1mm to 2mm), a)4 hole with gap (medium 1mm to 2mm), a)3 hole with gap (medium 1mm to 2mm), a)2 hole with gap (medium 1mm to 2mm), h plate (medium 1mm to 2mm), l plate right and left side (medium 1mm to 2mm), titanium strut plate 18 holes (medium 1mm to 2mm), x plate (medium 1mm to 2mm), double y plate (medium 1mm to 2mm), y plate (medium 1mm to 2mm), a)20 holes adaptation plate (medium 1mm to 2mm), orbital mesh (0.2- 0.4mm), screws for corresponding plate thickness of length 4mm, 6mm, 8mm, 10mm (micro plates 0.2mm - 0.8mm), a)10 hole continuous plate (micro plates 0.2mm - 0.8mm), a)6 hole with gap (micro plates 0.2mm - 0.8mm), a)4 hole with gap (micro plates 0.2mm - 0.8mm), a)3 hole with gap (micro plates 0.2mm - 0.8mm), a)2 hole with gap (micro plates 0.2mm - 0.8mm), titanium strut plate 18 holes (micro plates 0.2mm - 0.8mm), x plate (micro plates 0.2mm - 0.8mm), double y plate (micro plates 0.2mm - 0.8mm), y plate (micro plates 0.2mm - 0.8mm), a)20 holes adaptation plate (micro plates 0.2mm - 0.8mm), orbital rim (micro plates 0.2mm - 0.8mm), deformity reduction set, cobalt chromium rods 5.5 mm x 400 mm, mis battery or manual operated disc aspirator 1-2.5 mm, with 0.5 mm increment 13 - 19 gauge with 2mm increment straight or curved, anterior peek cervical standalone cage, intergrated peek cage with titanium screw locking mechanism 6mm-12mm length, self locking screw mechanism, 35 degree screw angulation cephedal to caudal, self drilling screws 3.5mm, 4mm, mis polyaxial set scerw accomadating 5.5mm rods, mis contoured or straight rods dia 5.5mm with sharp edge for edge for easy insertion, mis polyaxial screw with attachment option of plastic retractor for direct imaginga and visualization of rod, modified design for set screw insertion dia 5 t

Central Government / Public Sector

CTN :40473473

05 Jun, 2025 NA

Secunderabad - Telangana

Tender For manufacturing, assembling and supplying of ms anchoring device as per approved sketch no. xen/ews/lgd/01/2010/alt/2 suitable to fix 10/20rp to the bulk head doors of eur with 32mm dia 850 mm long en.19 mild steel forged i- rod, 12mm dia hts gr-3 helical spring 300mm long 2nos, mild steel flat plat es 2nos along with bolts, nuts and washers etc including transportation finished anchoring device to the wo rkshop/plant and handing over to stores in-charge with all contractors steel (ms rod, spring, ms flats) labour tools, plant, machining, drilling of holes cutting, leading, stacking etc complete as per approved sketch and to the specifications and as directed by engineer in-charge. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40447288

13 Jun, 2025 NA

Kangra - Himachal Pradesh

Tender For supply of rack 66 into 33 into 2 , plywood , fevicol , led 9 w bulb , 1point 5 sqmm cable , self drilling screws , ms angle 75 into 78 into 6 , cutter blade , ppgi sheet 0 point 5mm thickinto 3m into 1m , red oxide , synthetic enamel paint , turpentine oil , welding rod , turpauline 30 into 30 feet

CTN :40447613

07 Jun, 2025 NA

Mirzapur - Uttar Pradesh

Tender For supply of workshop equipments - cnc lathe machine , cnc milling machine , universal milling machine , surface grinder , slotting machine , lathe machine norton type , lathe machine precision type , heavy duty lathe machine capstan lathe , hand sheet cutting machine , drill machine , tool and cutter grinder machine , hydraulic hacksaw machine , pillar drilling machine , pillar drilling machine 40mm , bench vice 6 inch , hand vice 4 inch , pipe vice 3 inch , g clamp 6 inch , ball peen hammer 800 g , straight peen hammer 1 kg , cross peen hammer 800 g , flat chisel , round nose chisel , solid frame hacksaw , adjustable frame hacksaw , 10 inch flat files , 10 inch square files , 10 inch triangular files , scraper 8 inch , tap and die set , drill bits , hacksaw blade , tin cutter , steel rule 12 inch , try square 12inch stainless steel blade , scraper 6inch , combination set , calipers 10 inch , anvil 50 kg cast iron , slip gauge complete set metric 87 or 103 blocks of grade 1 steel , vernier calliper 300mm , vernier calliper 200mm , vernier calliper 150mm , inside vernier calliper 150mm , vernier calliper digital , vernier caliper dial , screw vernier caliper , vernier height gauge 300mm , vernier gear tooth caliper 0.02mm resolution , micrometer outside 0-25mm , micrometer outside 25-50mm , micrometer outside 50-75mm , micrometer outside 75 - 100mm , inside micrometer 25mm , inside micrometer 50mm , v anvil micrometer 10-25 mm , digital micrometer 25mm , vernier micrometer 25mm , depth micrometer 0- 100mm , gear tooth micrometer 25mm , sine bar complete set , sine centre complete set , vernier bevel protector , straight edge , radius gauge , feeler gauge , screw thread pitch gauge , thread plug gauges , plain plug gauges , ring gauges , snap gauges , outside firm caliper 6 inch , inside firm caliper 6 inch , outside transfer firm caliper 6 inch , inside transfer firm caliper 6 inch , outside spring caliper 6 inch , inside spring caliper 6 inch , hermaphrodite caliper 6 inch , combination set 12 inch , surface plate , autocollimator , two wire and three-wire thread measuring instrument , dial indicator 50mm 0-8mm 0-10mm , magnetic stand , wood turning lathe machine , surface planer machine , circular saw , jig saw machine , band saw , belt sander , compound mitre saw , drill press , dust collector , 3hp table top router , thickness planer , plunge router , disc sander 5 inch , four fold rule wooden type , steel tape 3 meter , spirit level iron 6 inch , hand saw 16 inch , tenon saw 10 inch , firmer chisel 1 inch , bevel chisel , mortise chise , mortise chisel , iron jack plane 14 inch , drill bit , claw hammer 340 gm , mallet hammer , ball pen hammer 800gm , bench vice number 4 , screw driver 200 mm blade , pincer 8 inch , scraper 6 inch , oil stone sharpening stone , inverter based pulse tig dc welder , inverter based mig welding outfit , inverter based arc welding rectifier , gas welding with all accessories , welding simulator , welding helmet , welding torch , welding regulator for oxygen co2 acetylene , flash back arrestor , gas welding torch , gas heating torch , electrode holder , welding gloves , welding apron , leg guard , hand hammer 800gm with handle , double ended sledge hammer of 2 kg head , tongs , anvil , punch , chisel , flatter and set hammer , top and bottom swages with rod handle for top , top and bottom fuller with rod handle for top , heart tools

CTN :40446785

13 Jun, 2025 NA

Hyderabad-T - Telangana

Tender For tender for supply of fabrication and supply items as per drawings by drdo approved agency raghav aerospace - fabrication and supply of 100 a mm lvdt housing with flange as per attached drawing , fabrication and supply of100 b mm lvdt housing with flange as per attached drawing , fabrication and supply of 100mm lvdt core rod as per attached drawing , fabrication and supply of 100mm lvdt front bush as per attached drawing , centralized grinding and drilling of 100mm lvdt core jacket as per attached drawing , fabrication and supply of 45mm v2 lvdt housing with flange as per attached drawing , fabrication and supply of 45mm v2 lvdt front bush as per attached drawing , fabrication and supply of 45mm v2 lvdt core rod as per attached drawing , centralized grinding and drilling of 45mm v2 core jacket as per attached drawing

CTN :40448742

13 Jun, 2025 NA

Jaduguda - Jharkhand

Tender For supply of chuck bush and bolt for m. 10 diamond drilling machine as per drawing no-d2em/1334 , chuck jaws- a-rod(set of horizontal and vertical jaws) as per drawing no-d2em/583/r

CTN :40389298

09 Jun, 2025 NA

Firozpur - Punjab

Tender For supply of bathing and toilet block structure with prefab colns , non skid ceramic floor tiles of size , looking mirror size , white cement , water proofing compound , cement based paint , welding rod , oil bound distemper , sand paper , turpentine oil , painting brush 4 inch. , painting brush 2 inch , red oxide primer , paint synthetic enamel black colour , m s flat 35 x 3 mm , cp soap dish 125 mm , angle iron staging , ms sheet manhole cover of , rotational moulded high density polyethylene water storage tank 1000 ltrs , gi socket 15 mm , gi elbow 15 mm , gi tee 15 mm , gi union 15 mm , cp bib cock 15 mm dia long body , gi pipe 15 mm dia , gi nipple 15 mm 3 inch long , gi plug 15 mm , 15 mm dia pvc connection pipes , gi socket reducer 20 to15 mm , gi pipe 20 mm dia med grade , gi socket 20mm , gi elbow 20 mm , gi tee 20 mm , gi union 20 mm , 20 mm brass stop cock , 15 mm brass stop cock , cp angle cock 15mm dia , gi nipple 20 mm 3 inch long , 20 mm dia check nut for pvc water tank , ewcpedestal pattern with p trap with low level flushing cistern of pvc with capacity 10 ltrs and pvc seat cover with flushing pipe , 75mmdia pvs swr , 75 mm dia pvc swr pipe , 75 mm dia pvc swr bend , 75 mm dia pvc swr socket , 75 mm dia pvc swr tee , 100 mm dia pvc swr socket , 100 mm dia pvc swr tee , 100 mm dia pvc swr elbow , 100 mm dia pvc swr pipe , ms clamp for 75 mm dia , m seal of 100 gms pkt , safeda , thread ball cotton 100 mtr long , jet sprey with 1 point 5 m long cp tube and holder chrome finished , pvc swr floor trap for 100 mm dia outlet pipe with grating , vitreous chine wash hand basin of size 550mm x 400 mm , cp hot and cold water mixer for whb , cp towel rail 600mm long 20mm dia , cp shower rose 125 mm with 200 mm long shower arm , electric gyser water heater 225 ltr capacity , pvc connection 450mm long , cp hot and cold water mixer for shower , batten holder , bulk head fitting made from cast aluminum , pvc square box , pvc ceiling rose , pvc gang box 4 way in one , switch pt 56 amps one way switch isi marked , pvc cable 10 sqmm twin core with copper conductor , pvc cable 2.5 sqmm single core with copper conductor , pvc cable 1.5 sqmm single core , flexible wire pvc insulated twin core twisted of size 23 0.076 , pvc insulation tape 2 cm width 10 mtr long , pvc bend 25 mm dia , pvc casing capping 25 x 16 mm 2 m long , led bulb 15 watt , mirror light 12 watt 230v 600mm long , switch socket combination 3 pin 16 amps , screws 1 2 inch full threaded , screws 1 inch full threaded , self drilling screws 2 inch full threaded , exhaust fan 300 mm sweep , mcb sp 32 amps 10 kva , mcb dp 63 amps 10 kva , mcb distribution box spn 4 way metal double door , pvc conduit pipe 25mm dia 10ft long , 4 core16 sqmm ug armed aluminium cable for external connection , interlocking tiles of size 200 x 120 x 60 mm thick i section , septic tank bacteria , soakage pit cover , septic tank

State Government

CTN :40410995

27 May, 2025 NA

Gondia - Maharashtra

Tender For call for purchasing of all kind of road and building material under various types schemes in year 2025-26 - list, cement isi marks 53 gread (ultratech/acc/birlagold/ambuja), composite cement, steel isi mark (6 mm), steel isi mark (8 mm), steel isi mark (10 mm), steel isi mark (12 mm), steel isi mark (16 mm), steel isi mark (20 mm), centring wire & nail, metal rod (angle), profile sheet 3 x16, profile sheet 3 x12, profile sheet 3 x10, profile sheet 3 x 8, steel square pipe 1 x 2, steel square pipe 1.5 x 2, steel square pipe 2 x 2, steel square pipe 2 x 3, 8 mm metal crusher broken (pachgaon) with roylti, 10 mm metal crusher broken (pachgaon) with roylti, 20 mm metal crusher broken (pachgaon) with roylti, 20 mm metal hand broken (pachgaon) with roylti, 40 mm metal hand broken (pachgaon) with roylti, 40 mm metal crusher broken (pachgaon) with roylti, 80 /100 mm metal hand broken with roylti, sand transport with roylti & all taxes, murum transport with roylti & all taxes, transporting/ carting (murum /malma /mati / material), fly ash bricks is type std size, rcc np-2 second 150 mm pipe with collars, rcc np-2 second class 800 mm pipe with collars, rcc np-2 second 600 mm pipe with collars, rcc np-2 second 450 mm pipe with collars, rcc np-2 second 300 mm pipe with collars, cement seet 4 x 10, rcc tanks for shok pit (mgnrega/sbm) standard size, rcc tanks cap for shok pit (mgnrega/sbm) standard size, indian toilet seet with murga, camod toilet seet with murga, wash besin complete set, hex nut bolt, wooden doors, fyber doors, wooden windows, steel doors, windows and ventilors and grills etc, tiles ceramic, tiles glezz, tiles vetrified, wall tiles, putty per bag, paint primer per ltr, paint regular per ltr, oil paint steel work per ltr, oil paint wall & roof per ltr, washable oil-bound distemper, waret proof cement paint per bag, pevar block 60 mm, pevar block 80 mm, pevar block 100/120 mm, scafolding & shuttering (centering), brass nal (tap) per nos, gi nal (tap) per nos, pvc nal (tap) per nos, brass ferrule 1/2" inch isi mark, mta 1/2" inch isi mark, fta 1/2" inch isi mark, pvc pipe 1/2" inch isi mark, pvc pipe 25 mm dia. isi mark, pvc pipe 32 mm dia. isi mark, pvc pipe 40 mm dia. isi mark, pvc pipe 50 mm dia. isi mark, pvc pipe 60 mm dia. isi mark, pvc pipe 75 mm dia. isi mark, pvc pipe 90 mm dia. isi mark, pvc pipe 110 mm dia. isi mark, pvc pipe 140 mm dia. isi mark, pvc pipe bend, galvanized steel pipe 110 mm dia. isi mark, galvanized steel pipe 90 mm dia. isi mark, galvanized steel pipe 75 mm dia. isi mark, galvanized steel pipe 65 mm dia. isi mark, galvanized steel pipe 32 mm dia. isi mark, galvanized steel pipe 20 mm dia. isi mark, ci sluice valve 75 mm, ci sluice valve 80 mm, ci sluice valve 90 mm, ci sluice valve 110 mm, ci sluice valve 140 mm, non return valve 75 mm, non return valve 80 mm, non return valve 90 mm, non return valve 110 mm, non return valve 140 mm, air valve 75 mm, air valve 90 mm, air valve 110 mm, air valve 150 mm, galvanized steel pipe and fittings 1.50 inch, galvanized steel pipe and fittings 2.00 inch, water tank 500 ltr, water tank 1000 ltr, water tank 2000 ltr, water tank 5000 ltr, green net 90 %, batching and mixing palnt, mixture machine rent, rolar machine rent, jcp rent, vibrator, water tanker, kateri tar, chain link fencing, pvc door (36"x78"), acp door (25"x75"), borewell flashing, borewell drilling, borewell casing pipe iron, borewell casing pipe pvc/cpvc, pv panal 50w per nos, solar street light installation charge per light, solar on-grid plant 1 kw with all charges, led bulb 9 w, led bulb 12 w, led bulb 15 w, led bulb 20 w, led bulb 30 w

State Government

CTN :40425690

28 May, 2025 NA

Gondia - Maharashtra

Tender For call for all types of building materials - list, cement isi marks 53 gread (ultratech/acc/birlagold/ambuja), composite cement, steel isi mark (6 mm), steel isi mark (8 mm), steel isi mark (10 mm), steel isi mark (12 mm), steel isi mark (16 mm), steel isi mark (20 mm), centring wire & nail, metal rod (angle), profile sheet 3 x16, profile sheet 3 x12, profile sheet 3 x10, profile sheet 3 x 8, steel square pipe 1 x 2, steel square pipe 1.5 x 2, steel square pipe 2 x 2, steel square pipe 2 x 3, 8 mm metal crusher broken (pachgaon) with roylti, 10 mm metal crusher broken (pachgaon) with roylti, 20 mm metal crusher broken (pachgaon) with roylti, 20 mm metal hand broken (pachgaon) with roylti, 40 mm metal hand broken (pachgaon) with roylti, 40 mm metal crusher broken (pachgaon) with roylti, 80 /100 mm metal hand broken with roylti, sand transport with roylti & all taxes, murum transport with roylti & all taxes, transporting/ carting (murum /malma /mati / material), fly ash bricks is type std size, rcc np-2 second 150 mm pipe with collars, rcc np-2 second class 800 mm pipe with collars, rcc np-2 second 600 mm pipe with collars, rcc np-2 second 450 mm pipe with collars, rcc np-2 second 300 mm pipe with collars, cement seet 4 x 10, rcc tanks for shok pit (mgnrega/sbm) standard size, rcc tanks cap for shok pit (mgnrega/sbm) standard size, indian toilet seet with murga, camod toilet seet with murga, wash besin complete set, hex nut bolt, wooden doors, fyber doors, wooden windows, steel doors, windows and ventilors and grills etc, tiles ceramic, tiles glezz, tiles vetrified, wall tiles, putty per bag, paint primer per ltr, paint regular per ltr, oil paint steel work per ltr, oil paint wall & roof per ltr, washable oil-bound distemper, waret proof cement paint per bag, pevar block 60 mm, pevar block 80 mm, pevar block 100/120 mm, scafolding & shuttering (centering), brass nal (tap) per nos, gi nal (tap) per nos, pvc nal (tap) per nos, brass ferrule 1/2" inch isi mark, mta 1/2" inch isi mark, fta 1/2" inch isi mark, pvc pipe 1/2" inch isi mark, pvc pipe 25 mm dia. isi mark, pvc pipe 32 mm dia. isi mark, pvc pipe 40 mm dia. isi mark, pvc pipe 50 mm dia. isi mark, pvc pipe 60 mm dia. isi mark, pvc pipe 75 mm dia. isi mark, pvc pipe 90 mm dia. isi mark, pvc pipe 110 mm dia. isi mark, pvc pipe 140 mm dia. isi mark, pvc pipe bend, galvanized steel pipe 110 mm dia. isi mark, galvanized steel pipe 90 mm dia. isi mark, galvanized steel pipe 75 mm dia. isi mark, galvanized steel pipe 65 mm dia. isi mark, galvanized steel pipe 32 mm dia. isi mark, galvanized steel pipe 20 mm dia. isi mark, ci sluice valve 75 mm, ci sluice valve 80 mm, ci sluice valve 90 mm, ci sluice valve 110 mm, ci sluice valve 140 mm, non return valve 75 mm, non return valve 80 mm, non return valve 90 mm, non return valve 110 mm, non return valve 140 mm, air valve 75 mm, air valve 90 mm, air valve 110 mm, air valve 150 mm, galvanized steel pipe and fittings 1.50 inch, galvanized steel pipe and fittings 2.00 inch, water tank 500 ltr, water tank 1000 ltr, water tank 2000 ltr, water tank 5000 ltr, green net 90 %, batching and mixing palnt, mixture machine rent, rolar machine rent, jcp rent, vibrator, water tanker, kateri tar, chain link fencing, pvc door (36"x78"), acp door (25"x75"), borewell flashing, borewell drilling, borewell casing pipe iron, borewell casing pipe pvc/cpvc, pv panal 50w per nos, solar street light installation charge per light, solar on-grid plant 1 kw with all charges, led bulb 9 w, led bulb 12 w, led bulb 15 w, led bulb 20 w, led bulb 30 w

Core Cutter Drill Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government / Public Sector

Central Government/Public Sector

State Government

State Government