Latest counter bearing Tenders | Government counter bearing Tenders

Central Government/Public Sector

CTN :40448914

13 Jun, 2025 NA

Sirsa - Haryana

Tender For repair and overhauling service - ground equipment;ground equipment; no; buyer premises-scope of work for servicing of ground equipment- regular servicing and preventing maintenance of ground equipment is essential to ensure the safety, efficiency, and reliablility of ground operations. gsse plays a critical role in supporting aircraft turnaround, maintenance, and logistics function. over time, continous use of equipment such as ladders, hydraulic rigs, trolleys, towing arms, and refilling systems can lead to mechanical wear, fluid degradadation, and unnoticed structural fatigue. faulty or poorly maintained gse poses a direct risk to personnel, aircraft, and ground assets. servicing ensures that all mechanical, hydraulic and structural components function safely and as intended. scope of work: 1. ladder frame to be inspected and weld joints for cracks for deformation and it is to be repaired. 2. anti-slip steps, handrails and safety locks to be inspected and to be rectified/changed. 3. caster wheels are to be checked for wear, lock function and lubrication and all the faulty parts are to be repaired/changed as per condition of the(f) equipment. 4. brake function and tow hitch mechanism is to be checked and to be repaired/changed as per condition of the equipment. 5. rust to be removed where required. 6. hoses and fittings are to be inspected for leaks and damages and thoses are to be repaired. 7. filters are to be changed if required. 8. cylinders are to be checked for cracks and are to be repaired. 9. structural integrity of frame and platform is to be checked and repaired as per requirement. 10. wheels are to be checked for alignment or any other bearing issues anfd same is to be repaired. 11. parking brake is to be checked along with the towbar assembly and is to be repaired as per requirement. 12. load securing hooks or rails are to be checked and to be made operational. 13. reservoir is to be checked for contamination and fuel level 14. hand/foot operations is to be checked and made serviceable. 15. dispensing hose nozzles and fittings are to be checked and are to be made serviceable. 16. straightness and structural integrity of bar is to be checked and same is to be rectified if required. 17. all the moving parts are to be lubricated with correct grade of lubes/greases. 18. conduct ndt if required for stress crack detection. 19. cleaning of equipment is to be done before and after servicing. 20. service status and next due date is to be tagged. 21. summary report is to be given to the user after repair of all the repairing work done. 22. adhere to oem servicing guidelines and intervals. 23. use of oem grade consumables and spare parts.

Central Government/Public Sector

CTN :40447501

13 Jun, 2025 NA

Panchkula - Haryana

Tender For supply of fuse , seal dust regular , spring , gasket , bucket intermediate hose , horn 12 v , transmission filter , head lamp , side cutter , hydraulic hose , clutch seal , hrs meter cable , hydraulic hose 915 lg , oil filter , housing filter , bush lift cylinder , bearing , bulb 12v 6w

State Government

CTN :40448528

09 Jun, 2025 17.68 Lacs

Raichur - Karnataka

Tender For procurement of bearings for id fan voith hydraulic couplings and aph guide bearing for bm-1 of rtps

corporations/Associations/Others

CTN :40441610

02 Jun, 2025 NA

Bokaro - Jharkhand

Tender For supply of sealing ring machining ee exciter end , stem _6570 , spares for servomotor of crh nrv drg.no. 0132350300000 compact sealing ring 1541 var_06 , threaded ring part no. 01 ip casing assembly drg no.01060118500 make bhel , fitted key for journal bearing hp front drg. no. 01160418000000 bhel spare part code no.116041800000039 ref. no. hw _174.163 , threaded ring part no 5 ip casing assly drg no. 01060118500 make bhel , clamping piece spare part code 01030746000012 hw_174.02 pt no_0103072200000007 for lp rotor blading , clamping piece spare part code 01030722000008 hw_174.05 pt no_0103072200000008 for lp rotor blading , hose dn 16x2200 w9737260902 assy drg_0116040100000043 mfg drg_st22004.002 , parallel key hw_286.62 spare part code 01060118500016 part no_0106011850000016 , seal ring machining te , high press hose dn 16x1200 assy drg no_0118141800000049 mfg drg no_st22004.005 , parallel key hw_286.61 spare part code 01060118500012 part no_0106011850000013 , fitted key assy drg no_0118141800000037 mfg drg no_41181801034 , threaded ring part no 07 ip casing assly drg no. 01060118500 make bhel , fitted key hw_259.16 spare part code 01060118500018 part no_0106011850000018 , hp hose spec tg60552 assy drg no_1139180100000001 , valve seat assy 6013 , stem _6013 bpe valve_ 3.2 sqcm , hose dn 6x2500 spare part code 01160418000004 hw_208.006 drg no 0116041800000004 for journal bearing d250x180 brg_01 , sealing strip 8x2x1100 spare part code 2117241000004 , threaded ring part no. 03 ip casing assembly drg no.01060118500 make bhel , hp hose part no.1142140100000001 , parallel key hw_286.61 spare part code 01060118500012 part no_0106011850000012 , over running clutch assy. drg. no. 11150137000002 of hydraulic motor of barring gear. , follow up piston spring assembly tested and calliberated for ip sec. oil of follow up piston for electro hydraulic converter , fitted key ass drg desc journal bearing d250x180 assly drg no. 01160418000 part no. 38 variance no. 0 bid details/ 2 / 31

Central Government/Public Sector

CTN :40388750

09 Jun, 2025 NA

Jaduguda - Jharkhand

Tender For supply of pump unit part no. -3217 9203 11 for rexorth make hydraulic pump 71 c. c pump id-r902419602 , plate bearing part no-3217 9203 27 for rexorth make hydraulic pump 71 c. c pump id-r902419602 , distribution plate for rexorth make hydraulic pump 71 c. c pump id-r902419602

Central Government/Public Sector

CTN :40427829

16 Jun, 2025 NA

Midnapore - West Bengal

Tender For supply and delivery of dlw loco spares to hdc - socket hd. cap screw 10 x 30 lg.,socket hd. cap screw 12 x 70 lg.,socket hd. cap screw 12 x 90 lg.,lock wire 14 swg x 1250 mm. lg.,sanding arrgt.,m.n.s pin,keeper pin,split cotter pin,socket hd. cap screw 3/4 inch-10 x3-1/4 inch long.,nut 3/4 inch,lock washer 3/4 inch,copper washer ( benzo bolt),seat, drivers,looking glass,weather strip 2.25 mm.,arm rest,hinge 3 inch x 3 inch,hex. nut,lock washer 1/2 inch dia.,hydraulic damper lateral,hydraulic damper vertical,lever fulcrum pin,bolt 1/2 inch- 13 hex,spring lock washer 1/2 inch,sa-9 brake valve,modified a-9 auto brake valve,nut 3/4 inch,victalic coupling 3 inch flrxiblr pipe coupling,gasket coupning,coupling 3 inch dressor,coupling 1 inch dreassor,elbow 1 inch, dressor,hex. hd. bolt-3/8 inch-16x1 inch,hex.nut-3/8 inch-16,hose assly.,adopter 3/4 inch-14x1-1/16 inch-14,dressor coupling 3/4 inchx90 degree,dressor coupling 3/4 inchx90 degree,pipe plug 1/2 inch sq. hd.,fuel pump support with cross head and lifters,fuel pump cross head,fuel pump cross head lifter,adjusting screw,f.p cross head cam roller,cam roller,retaining ring for cam roller pin,cam roller pin (air & exhust),cam roller bushing,cam roller pin,o ring tube to cylinder head,air strainer 1/2 inch,h/l rotary switch,g.f . c.o switch,m.u switch,led cab light,indication panel,needle bearing ,plate type lube oil cooler (dlw drg. no. tpl-8515),equaliser pin, head lamp switch (hlps), switch toggle,carbon brush for t/ motor tm907bz,contactor complete m50ec2,contact assy. (power contactor),lws electronic,safety valve j-1 set at 10.5 kg/cm2,c2 relay valve,c2 w relay valve,cut out cock,ball type 1/2 inch without vent,cut out cock,ball type 3/4 inch without vent,cut out cock,ball type 1 inch without vent,water level gauge.,3 phase ac fuel pump motor ,3 phase ac cc motor ,equalizer, with bushing & wear plate,equalizer pin,clevis pin,oil stainer assembly,end cover (plain),end cover ( hasler speedo),inlet valve plug,brake cylinder complete with push rod(l.h),brake cylinder complete with push rod(r.h),brake shoe key,doule sliding window,inlet valve ring,air dryer,m.r. auto drain valve (gm type),6 inch single air gauge (b.p),4 inch duplex air gauge (m.r & f.p),4 inch single air gauge ( b.c),loco brake release switch,control air gauge,oil pressure indicator assly.with indicating plate,breather assly.,cylinder l.p /exhauster,cylinder h.p.,hose flexible,fuel cross over gen. end,air flow measuring gauge ,push button ,1 1/4 inch check valve ,gf contractor,engine control switch (ecs),fuel gauge assm.,

corporations/Associations/Others

CTN :40399168

02 Jun, 2025 NA

Sirmaur - Himachal Pradesh

Tender For for re-metalling/babbiting and machining of raw mill trunnion bearings, cement mill trunnion bearing, raw mill countershaft bearings and cement mill ht motor bearings

Central Government/Public Sector

CTN :40423348

11 Jun, 2025 9.18 Crore

Ganjam - Odisha

Tender For supply of spares for maintenance of ihc holland dredge - locking ring duo - cone seal 431, 5767372 , locking ring duo-cone seal 432, 5767373 , liquidyne groove bush-steel-wa160-l-95mm-cw-id=126mm, 110024916 , threaded liner/shaft sleeve pn.227, 57040957 , spacer pos 605, 50402653 , liquidyne lip seal, wa 600, pos 228, 02232160 , liquidyne spring seal for -wav160 part no-02232164 , slotted head screw pos no:109, m6x10 pt no.00278045 , hex head bolt pos. no:121 pt no.00142858 (m16x55mm), 00142.858 , washer pos no:124, 55089111 , throttle plate pos. no:144, wa160, 57005985 , hex. head screw pos. no:131 pt no.00141854 (m16x45mm) , hex head socket screw pos. no:136 pt no.00252734 (m12x40mm) , o'ring pos. no.126, d=13mm, l = 2375 , o'ring pos. no.127 pt.no l = 1081 ,d=6mm , liquidyne pos.no:220 , o' ring pos. no.625 d=6mm, l = 970, 20851.379 , o' ring pos. no.685 5d = 6 , l = 417, 20851.379 , o'ring pos. no.686 d=3mm, 20851.376 , spud dia 559-2860100 , pump wear plate (shaft side) part no-112, 5903880, 57010961 , suction shaft side cover part no-111, 50402359 , pump wear plate (suction side) part no-113, 57010961 , nozzle liner part no-163, dz 350 x 200 mm, 57012.007, 57012137 , shaft cover part no-150, 50401048 , hydraulic cylinder sa-110/90*2100 , bend 45 deg sl1, 380 dia , straight pipe sl2, 380 dia , bend 45 deg sl3, 380 dia , bend 45 deg 51, 380 dia , straight pipe s2, 380 dia , s3-bend 33.5 53, 380 dia , stand pipe sp/ep2, drn no. 2724100 , 90 deg sp/ep2 d1 , bend 45 d4 , straight pipe d5 , bend 45 d6 , replacement pipe d7 , compensator rubber 80mm dia , oil water cooler for ambuja dredge p.20.2pl-600 mv , seal duo-cone, mechanical face seal, goetze-76.90 , coupling saec 12/24db z = 14 inc.seals (fitted between gear box & hyd pump) , main pump bearing assembly with pedstal part no -699, 100405357 , thrust ring pt no.110 pt no.57005997 , bonded seal (dowty ring) pos no:122 pt no. 02176032, d = 51.7 , bonded seal (dowty ring) pos no:123 pt no.02176017, d = 19.65 , bucket wheel cutter part no - (bw 2410) pt no.301, 5246883 , pump casing part no-103, dn.50402346,an.57008969 , pump impleller 75-25-35 3bl wa 160 part no-105, 57015975 , suction mouth (suction line) part no-dn.50402204, pos 100 , sleeve pos 615,57032111

Central Government/Public Sector

CTN :40427167

11 Jun, 2025 9.18 Crore

Ganjam - Odisha

Tender For supply of spares for maintenance of ihc holland dredge - locking ring duo - cone seal 431, 5767372 , locking ring duo - cone seal 432, 5767373 , liquidyne groove bush- steel-wa160-l 95mm-cw-id 126mm, 110024916 , threaded liner shaft sleeve pn.227, 57040957 , spacer pos 605, 50402653 , liquidyne lip seal, wa 600, pos 228, 02232160 , liquidyne spring seal for -wav160 part no- 02232164 , slotted head screw pos no 109, m6x10 pt no.00278045 , hex head bolt pos.no 121 pt no.00142858 m16x55mm, 00142.858 , washer pos no 124, 55089111 , throttle plate pos.no 144, wa160, 57005985 , hex. head screw pos.no 131 pt no.00141854 m16 45m , hex head socket screw pos.no 136 pt no.00252734 m12 40mm , o ring pos.no.126, d 13mm,l 2375 , o ring pos.no.127 pt.no l 1081,d 6mm , liquidyne pos.no 220 , o ring pos.no.625 d 6mm,l 970, 20851.379 , o ring pos.no.685 d 6mm, l 417, 20851.379 , o ring pos.no.686 d 3mm, 20851.376 , spud dia 559-2860100 , pump wear plate shaft side part no -112, 5903880, 57010961 , suction shaft side cover part no - 111, 50402359 , pump wear plate suction side part no - 113, 57010961 , nozzle liner part no -163, dz 350 200 mm, 57012.007, 57012137 , shaft cover part no - 150, 50401048 , hydraulic cylinder sa- 110by90degree2100 , bend 45 deg sl1, 380 dia , straight pipe sl2, 380 dia , bend 45 deg sl3, 380 dia , bend 45 deg s1, 380 dia , straight pipe s2, 380 dia , s3- bend 33.5 s3, 380 dia , stand pipe spbyep2, drn no. 2724100 , 90 deg spbyep2 d1 , bend 45 d4 , straight pipe d5 , bend 45 d6 , replacement pipe d7 , compensator rubber 80mm dia , oil water cooler for ambuja dredge p.20.2pl 600 mv , seal duo - cone, mechanical face seal, goetze-76.90 , coupling saec 12by24db z 14 inc.seals fitted between gear box and hyd pump , main pump bearing assembly with pedstal part no - 699, 100405357 , thrust ring pt no.110 pt no.57005997 , bonded seal dowty ring pos no 122 pt no. 02176032, d 51.70 , bonded seal dowty ring pos n 123 pt no.02176017, d 19.65 , bucket wheel cutter part no - bw 2410 pt no.301, 5246883 , pump casing part no -103, dn.50402346,an.57008969 , pump impleller 75-25-35 3bl wa 160 part no -105, 57015975 , suction mouth suction line part no -dn.50402204, pos 100 , sleeve pos 615,57032111

Central Government And Public Sector

CTN :40387562

27 May, 2025 1.30 Lacs

Pali - Rajasthan

Tender For unit rt 09 crowan caze and cathead shaft with foundation bolt-, unit rt-09 crown caze and cathead sl, , fabrication of rotary table crown caze as per sample and size which made out of en-alloy steel with heat-treatment with inner slot., , 19, , size:- 255 mm o.d. x 14" long, , 2, , 12 mm x 50 mm rivet., , 3, , rotary table foundation bolt right end and left end thread., , 4, , fabrication of cat-head shaft as per size and sample which made out of en-9 alloy steel with heat-treatment., , 5, , size:- 70 mm o.d. x 14"long., , bearing 6218, , 5 | depositing welding on vertical crown and machining bearing size., , 7, , depositing welding on bush of oil seal and machining as per seal size., , : old shaft pull out from gear and crown by hydraulic press and fitting on new shaft., , crown riveting on new crown caze., , put in an envelope

Counter Bearing Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors