Latest counting system Tenders | Government counting system Tenders

CTN :41233083

27 Aug, 2025 NA

Tarapur - Maharashtra

Tender For corrigendum : supply of pre amplifier pcb for area gamma monitor , pre amplifier pcb for continuous air monitor , pre amplifier pcb for contamination monitor , dac ic pcb for agm, cam and lgm , 4 to 20ma conversion pcb for agm and cam , keypad for wide range gamma monitor , keypad for radiation counting system , keypad for area gamma monitor , keypad for contamination monitor

CTN :41473557

30 Aug, 2025 45.00 Lacs

Bikaner - Rajasthan

Tender For nib for supply of hardware - super senior pellet mill, bearing cover frontforged steel, bearing cover rearforged steel, bearing setting ringforged steel, counter shaft assembly with pulley without beltwithout bearing & pedestal, die cover ringforged steel, die holder (steel) forgedforged steel, die holder assemblyforged steel, die holder rind rearsuitable for above alloy steel, die holder ring frontforged steel, feeder conditioner s. s. knifes.s. 304, thread 1/2" bolt per piece, feeder conditioner screw and paddle type feeder conditioner body s.s. approx. 1430 mm long s.s. -304 construction arrangement of single drive feeding end., front bearing spacer for t shaft, front scraper (roll stay assembly)forged steel with clamping stay, front scraper blades for pellet mill, pellet cooler air lockheight 450 mm/width 250 mm inlet/outlet 155 mm, pellet cooler eccentric assembly, pellet cooler sensor, pellet diesize:520 dia inner x 635 outer x 23.0 wider pellet :10/8 mm hole perforationmounting: tapper collar 12 deg on 620.6 dia or straight plug dia 610 diafixing 12-m 20 x 25 deep on 565 pcdmaterial: en 19c or 42crmo4 duly hardened & temp. polished, rc4=5, pulley assembly (fly wheel) 11 grooveforged steel, rear scraperforged steel, roll holder shaft (t shaft) assemblyforged steel, shearing pin, helical gear with hubone set containing 2 numbers, helical gear without hubone set containing 2 numbers, pellet mill sieve, screw for variable speed feeder conditioner for pellet mill, shear pin holding body, shear pun bush, spring set, teflon bush for main t shaft, pallet down spout, roll stay support stud (ss), pedestal sn 617, pedestal sn 619, pedestal sn 615, press roll assembly super senior, bearing cover, bearing retainer/nut for eccentric shaft km- 20, center bolt/roller stud (allen, bolt, head type design), circlip(dia 180 inside), clamping device tension ring(90x101x17) mm , distance ring, eccentric shaft, lock nut with lock washer for press roll eccentric shaft, lock washer (mb-20), nut for center bolt (lighting ring), press roll assembly complete with shell, bearing etc.suitable for above en-24 shell, press roll shell, setting ring, spacer (sealing ring), molasses mixer, molasses cutting knife with nutsuitable for above ni, hard duly balanced, paddle plane and loop typesuitable for above ni, hard duly balanced, spray pipe nozzle with nipple1.5 inch c class pipe, 3/8 inch nipple, mixer pipe (ss) suitable for molasses mixer, full circle hammer mill, beater (flat type) all equal weight, (big size 180 mm x 50 mm x 10 mm)ni hard, dynamically balanced, beater (flat type) all equal weight, (small size 140 mm x 47 mm x 06 mm), beater holder shaften, material, beater holding bush (size length 30 mm, in dia 20 mm, outer dia 30 mm), beater holding bush (size length 60 mm, in dia 20 mm, outer dia 30 mm), beater holding bush (size length 36 mm, in dia 20 mm, outer dia 30 mm), beater holding bush (size length 53 mm, in dia 20 mm, outer dia 30 mm), carrying rod for hammer mill 2 no of each set, door closing clamp set, hammer mill feeder, permanent magnet, sieve set3 mm, thick ms sheet with 3 mm, 2mm, 4mm, 5mm and 6mm perforations, sieve set clamping frame, hammer mill rotor, screw conveyor, screw conveyor, gravity pipe clamping 8 inch dia., gravity pipe clamping for above pipe8 inch dia, 16 gauge., gravity pipe m.s.8 inch dia, 16 gauge, 1 meter long, gravity pipe s.s.8 inch dia. 14 guage 1 mtr. long., pazama flap 3 way for distributionsuitable for 8 inch pipe, screw of different sizes, shaft suitable for joining the screw conveyor, chain conveyor, radler chain matching our existing chain conveyor. chain should 10mm thick links along with bushes and roller duly hardened., chain supporter with single bearing $nylon roller with shaft and bearing 1 no., lock ring, shaft 255mm long, chain supporter with double bearing $nylon roller with shaft and bearing 2 no., lock ring, shaft 255mm long, chain supporter (3-piece bush) $nylon roller without beari

CTN :41375517

01 Sep, 2025 NA

Kangra - Himachal Pradesh

Tender For supply of development of multipurpose test bench for testing of hydraulic pumps e e - hydraulic oil tank one twenty litre capacity , electric motor twenty five hp of one thousand four hundred forty rpm , hydraulic cylinder , direction control valve , relief valve , oil temperature monitor , pressure gauge one gauge for pump pressure comma two gauge for operating pressure , electrical panel , digital pressure gauge , motor rpm digital , suction pressure gauge , accessories suction filter comma return line filter , pump flow meter , pressure switch , labour comma fitment comma misc , hydraulic pump for neutral position calibration , extra valves , hydraulic circuit for high pressure testing upto eight thousand five hundred psi , frequency drive for adjusting of rpm for variable speed level , servo valve operating system , additional items mounting comma nipples comma connectors comma nozzles

CTN :41424359

15 Sep, 2025 23.00 Lacs

Dharwad - Karnataka

Tender For supply, installation, testing and commissioning of atlas copco or equivalent make oil injected, air cooled, 25hp variable speed drive rotary screw air compressor with integrated refrigerant type compressed air dryer, downstream filter, vertical air receiver & its associated accessories along with necessary mechanical, civil & electrical works at 30mt powder plant on turnkey basis as per our technical specification mentioned in tender documents.

State Government

CTN :40985775

25 Aug, 2025 1.50 Crore

Mohali - Punjab

Tender For corrigendum : purchase of gym for strength and conditioning equipments - endurance sectiontreadmill1. machine must be designed for running with heavy duty 4 hp motor.2. should have low start up speed: 0.5 kmph or lesser.3. should have incline increments of 1% or lesser.4. low step height: 7 or lower.5. speed range: 0-20 kmh or more.6. incline: 0-15% or more.7. max user weight: 180 kgs or more.8. belt size : 61 x 22 or more9. should have at least 10 preprogrammed protocols with option for heart rate range control10. led console with feedback for time distance, calories burnt, heartrate, incline, track and more product should have en-957 or astm certification for stationary fitness equipment, curved non- motorized treadmill (self- powered)1. curved non-motorized treadmill should be capable of training the body s all energy systems as a comprehensive system, capable of offering sprinting for aerobic power development2. curved non- motorized treadmill (self powered) should be capable of offering the sports persons to experience a full speed resistance spectrum.3. variable resistance: the curved non- motorized treadmill (self powered) system should have requisite advanced drive technology enabling users to select different levels of reactive resistance, from zero to max. by simply shifting the drive control system, rehab athletes can quickly switch from resistance-free running to an all-out sled push.4. increased metabolic rate: walking with resistance on said curved non-motorized treadmill (self powered) training system should be capable of enhancing energy expenditure significantly compared to walking at the same speed on a traditional treadmill or a non- motorized treadmill without resistance.5. maximum muscle activation: ergonomic design of the curved non-motorized treadmill (self powered) training system should lead to significantly higher activation of the posterior kinetic chain muscles, particularly the glutes and hamstrings, compared to traditional treadmills.6. curved non-motorized treadmill (self powered)- training system should be capable of being operated and controlled exclusively by the force applied / generated by rehab athletes. in order to speed up, provision should be there, where rehab athlete can move to the front of the surface and to slow down, rehab athlete can move to the back of the said treadmill. provision must be there where the training system can be accelerated quickly from a cold start and matches upto the same pace as the rehab athletes intends to attain. the said system should offer an ideal solution for an eco-sustainable facility, by reducing electricity costs and carbon footprint.7. training system should have requisite technology, ergonomic design and advanced engineering solution so that rehab athletes can work hard in a completely safe training environment.the ergonomic design combined with the high- quality components and materials should be of solid, compact product with a versatile nature that endures well to suit high intensity prolong training sessions to ensure maximum durability and reliability.8. provision for proper posture control:the ergonomic design of training system promotes the correct alignment of the ankles, knees, hips and back, so that user can maintain natural posture at all- times and avoid joint and knee stress, regardless of their height and weight. system should offer the provision of simulating the experience of walking/running uphill while preserving the correct biomechanics.9. accessory kit: the training system must be provided with accessory kit which allows for a variety of pulling and pushing exercises through handles or a waist belt.10. technical specifications:a) dimensions range (lxwxh)*:190-200cmx86- 95cmx150-160cmb) console type: a minimum of 6-7 lcd display with back lightc) power supply: lps 5v wall supplyd) power requirement: 200 - 240 v (should comply with standard indian electrical system)e) resistance control: should have magnetic resistance with a min

Central Government / Public Sector

CTN :41352047

18 Aug, 2025 NA

Hyderabad-T - Telangana

Tender For supply, installation and commissioning of variable voltage variable frequency drive for exist ing eot crane panel. description: 3 level control method vvvf drive for high torque, 3ph. 400v, 11kw, vari speed g7, cimr-g7a40111, max. output frequency-400hz, output frequency resolution-0.001 hz, overloa d capacity-150% rated output current for 1 min, 200% rated output current for 0.5sec. make:yaskawa/abb/ seimens or similar. [ warranty period: 30 months after the date of delivery ]

CTN :41236040

20 Aug, 2025 NA

Mumbai - Maharashtra

Tender For supply of alpha counting system

Counting System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government / Public Sector