Latest coupling element Tenders | Government coupling element Tenders

corporations/Associations/Others

CTN :40478582

16 Jun, 2025 NA

Chennai - Tamil Nadu

Tender For tender for supply of broken screw and nail removal set and universal nail extraction set - hollow reamer , complete , anticlockwise cutting , for screws 3.5 and 4.0 mm , extraction bolt , for screws 3.5 and 4.0 mm , hollow reamer , complete , anticlockwise cutting , for screws 4.5 mm , extraction bolt , for screws 4.5 and 5.0 mm , extraction screw for screws 3.5 mm , extraction screw , conical , for screws 4.5 and 6.5 mm , t-handle with quick coupling , screwdriver shaft , hexagonal , small , 2.5 mm , screwdriver shaft , hexagonal , large , 3.5 mm , hss drill bit 3.5 mm for implant steel , sterile , hss drill bit 2.5 mm for implant steel , sterile , screwdriver shaft , stardrive , t8 , self-holding , forceps for screw removal , l 205mm , gouge , 10mm wide , l 205mm , hollow reamer for 5.0 / 6.0 / 6.5 / 7.0 mm screws , extraction bolt , for 5.0 / 6.0 / 6.5 / 7.0 mm screws , sharp hook , l 155mm , screw driver shaft stardrive t15 , 3.5 , screw driver shaft stardrive t25 , 3.5 , handie with quick coupling , extraction plier for screws , to grasp screws behind the screw head , screw driver hexagonal cannulated 4.5 , screw driver hexagonal cannulated 6.5 , connector with thread , for extraction hook , extraction hook , length 480 mm , for nails dia 9.0 mm , extraction hook , iong , for nails dia 9.0 mm to 11.0 mm , extraction hook , iong , for nails dia 11.0 mm to 14.0 mm , t- handle with quick coupling , box tray for instruments , including all conical / straight bolts , extraction rod , slot hammer etc.

CTN :40241923

29 May, 2025 NA

Tawang - Arunachal Pradesh

Tender For bid to ras supply of havells,standard,l and t , welding machine portable make- wldstar,technotronics , iron welding rod confirming to is 814-2002 isi marked 3.15mm thick 100 nos pkt , hand gloves leather best quality isi marked , sun glasses for welding , m seal 150 gm pkt make-pidilite,fevicol,m seal , taflon tape roll isi marked make-supreme,omega,asbestos , solvent cement 150 gm tube make-finolex,fit well,jindal , brass cp wall mixer for mixing hot and cold water screwed down for ppr pipe of dia 20mm make- cera,hindware,parryware , mcb four pole 63 amp make- havells,equivalent , pvc tape insulation 25 mm wide 5 mtr long make- steelgrip,anchor,kinjal , led blub 9w make- bajaj,crompton,havells,philips , distribution box 4 way double door spn, 240 volts copper bus bar and neutral link earthing stud as per store list , cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conductor of size 4.0 sqmm single core as per store list , pvc cable 6 sqmm 2 core aluminium conductor multi stranded confirming to is 1554-1988 make- havells,finolex,polycab , cable pvc insulated electric cables heavy duty 1100 volts grade served multi stranded copper conductor of size 6 sqmm single core as per store list , wall mounted fan 230v 300mm make-usha,khaitan,bajaj , plywood 6feet x 4feet x 12mm thick termite resistant and bwr as per store list , silicon gel with gun make-standard , gi binding wire tata,sail,jsw , pvc casing capping of size 1inch medium grade snow white make- presto,polycab,finolex , ppr pipe 20 mm dia make- sfmc,finolex,supreme , chromium plated piller cock swan neck with aerator and butter fly handle weight not less than 450 gm as per store list , nails 1inch isi marked , nails 2inch isi marked , nails 4inch isi marked , nails 5inch isi marked , nails 6inch isi marked , self driving 2.5inch screw for ppgi sheet 100 nos,pkt , pvc pipe 110 mm dia each 3 mtr length make-prince,finolex,supreme , pvc tape 19mm wide 5 m long make-steelgrip,anchor,kinjal , self driving 1.5inch screw for ppgi sheet 100 nos,pkt , puf revit 75mm isi marked , wash hand basin 580 mm x 450 mm with assy and with pedestal confirming to is 2556-2004 as per store list , chromium plated waste coupling 32 mm dia make- supreme,johnson suisse,famingo , pvc waste pipe 32 mm and 1m long make-supreme,johnson suisse,famingo , pvc connection 45 cm long 15 mm make-supreme,johnson suisse,famingo , looking mirror of size 600 x 450 mm with 4mm thick glass and 4 mm thick back ply make- prayag,saint gobain,modigaurd , mcb single pole 16 amp capacity b series confirming to is 8828 of 1996 make- havells,l and t, standard , brass chromium plated shower rose 100 mm dia with bend make-ess ess,prayag,johnson suisse , curtain arrangement drapery and rod made of 25 mm dia and 1600 mm long, pre coated ms pipe with fancy type ends as per store list , ceiling fan 1200mm sweep with regulator and incl clamps, hooks, holdfast and complete fittings make-usha,khaitan,bajaj , cgi sheet 12feetx3feet x 0.63mm make-sail,tata,jindal , plywood 8feet x 4feet x 12mm thick termite resistant and bwr confirming to is 1328-1996 make-supreme,green ply,kit ply , mcb spn 240 volts 63 amps make-havells,standard,l and t , electric geyser 5 star of capacity 25 ltr make-v-guard,racold ,bajaj,crompton , ppgi roofing sheet 10feet x 3feet long and thickness 0.63 mm with grard film as per store list attached , fire extinguisher of one kilogram capacity, dry power type conforming to is-13849 along with its accessories as per store list , steel screw 15mm size full bid details/ 3 / 113 thread isi marked, 100 nos,pkt , steel screw size 3inch full thread with rawl plug isi marked 100 nos,pkt , steel screw full thread with rawl plug of 1.5inch size isi marked 100 nos,pkt , ppr socket 32 mm make-sfmc,finolex,supreme , ppr socket 25 mm make-sfmc,finolex,supreme , ppr elbow 90 degree 25 mm make-sfmc,finolex,supreme , ppr plain t 25 mm make-sfmc,finolex,supreme , pvc float valve 20 mm dia make-

CTN :40478488

10 Jun, 2025 NA

Khammam-T - Telangana

Tender For supply of basket strainer part no 1 moc gal stl , cap screw part no 12 moc steel 1 set 32 nos , line shaft part no 18 moc steel c 40 , line shaft bearing part no 19 moc syn rub neoprene , line shaft coupling part no 23 moc c stl , head shaft part no 26 moc c 40 stl , top column flange part no 27 moc ci , sleeve for packing box part no 30 moc ss 316 , bolt with nut part no 43 moc stl , coupling pins with rubber bushes set , rubber bushes for coupling pins

CTN :40447681

30 May, 2025 4.72 Lacs

Multi City - Karnataka

Tender For supply of materials and machinery for construction of hitech toilet at government high school tavanshi villege of athani taluka - atn-1 granite/trap broken metal 100 mm and down size, atn2 coarse sand (zone iii), atn3 broken stone aggregate 40 mm size, atn4 broken stone aggregate 20 mm size, atn5 broken stone aggregate 12 mm to 10 mm size, atn6 portland cement, atn7 mixer (concrete) - 1 cum capacity, atn13 rubble stones, atn14 bond stone 20 x 20 x 45 cm, atn15 mixer (concrete small used in culvert), atn22 burnt bricks class 35 (non modular), atn10 tmt bars fe 500, atn11 binding wire, atn28 providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for roof slab, atn24 providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for columns, atn34 providing and fixing special make glazed vitrified tiles (granomite finish) of approvedmake, quality and colour of size 600x600x10mm thick fixed on existing flooring with a special adhesivefor flooring and skirting and jointed with neat cement slurry mixed with pigment to match the shade oftiles., including providing spacers at required interval and removing stains etc.,cost ofmaterials,mortar,labour etc., complete as per specifications., atn31 providing and fixing m.s.grill work for windows and ventilators weighing 21kg/sqm usingm.s. flats, or m.s. square rods, or combination of m.s. flats and square rods as per approved design,drawing including cutting steel sections and welding the same to required pattern with a coat of red leadprimer, cost of materials, fixtures, labour and hom of machinery complete as per specifications, atn36 providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on10mm thick cement plaster, atn38 providing and applying painting in two coats with plastic emulsion paint ofapproved brand on wall surface to give an even approved shade after throughly brushing the surface,free from mortar drops and other foreign matter including preparing the surface even and sand papersmooth, cost of materials, labour, complete as per specifications., atn39 providing and finishing external walls in two coats with waterproof cement paint ofapproved brand and shade to give an even shade after throughly brooming the surface to remove all dirtand loose powdered material, free from mortar drops and other foreign matter cost of materials, labour,complete as per specifications., atn40 providing and fixing white vitreous china clay, water closet orissa pattern of size 580 x440mm with integral type footrests, 100mm s or p trap, 10 litre low level, p.v.c flushing cistern ( all areapproved make ) with fittings, c.i / m.s brackets, 32mm diameter flush pipe fittings and clamps, overflowarrangements with special and 25mm mosquito proof coupling of approved design, painting of fittingsand brackets, cutting and making good the wall and floor wherever including cost of material, atn41 providing and fixing white vitreous china clay, flat back wash basin size 550x400mmwith a pair of 15mm c.p brass pillar taps with c.i / m.s brackets, 32 mm c.p. brass waste of standardpattern, painting of fittings and brackets, cutting and making good the wall and floor wherever required,including cost of materials, labour complete as per specifications., atn42 providing and fixing white vitreous china clay, wall corner type, lipped front urinal basinof size 340x410x265mm with 5 litres p.v.c automatic flushing cistern, c.i / m.s brackets, standard flushpipe and c.p. brass spreaders with brass unions and g.i. clamps complete painting of fittings andbrackets, cutting and making good the wall and floor wherever required, including cost of materials,labour complete as per specifications., atn44 providing and installing at site of work p.v.c. pipes including cost of pipes andspecials and labour, including lowering into trenches, laying true to line, level and perfect linking at jointsleak proof including jointing of approved t

CTN :40469534

13 Jun, 2025 NA

Pathankot - Punjab

Tender For supply of clutch booster hose , pin cotter split steel , air pressure pipe , gasket kit , dust seal , repair kit , seal plain palm coupling , gasket exhaust manifold , pinion oil seal kit , hose js 8x800 , hose assy , field coil assy , oil seal hub , roll wire 10 mm 25 mtr , mud flap , wind screen weather strip , cylinder head gasket , speedometer cable

Central Government/Public Sector

CTN :40344469

03 Jun, 2025 NA

Durg - Chhattisgarh

Tender For corrigendum : procurement of gasket and rubber kit - a gasket water inlet to block , b gasket pump support to block , c gasket valve lever casing to cyl head , d dresser coupling gasket2 point 1by2 , e o ring for fuel pumping , f o ring expressor lube oil pump , g gasket water jumper pipe bottom , h armoured gasket without steel , i armoured gasket , j a9 rubber valve rubber kit , k sa9 independent brake valve rubber kit , l c2 relay valve rubber kit , m gasket for cylinder liner , n dressor gasket 2 , o armoured gasket 2point5 , p gormet for fip supporty cover , q gasket tappet cover casing valve lever , r gasket water pipe to water collector , s gasket phasing plate , t gasket fuel primary and secondary , u gasket lube oil strainer cover , v gasket lube oil strainer cover , w water jumper top gasket , x rubber roller , y gormet push rod sleeve , z gasket base cover to genrator end , aa seal o ring , ab gasket pipe to pump and lube oil cooler , ac gasket regulatingvalve to base , ad gasket body to spring housing , ae gasket pipe to strainer , af gasket cover to housing , ag gasket pump to plate and base , ah gasket shim to housing and cyl head , ai gasket , aj gasket support to base left side , ak gasket support to base right side , al gasket coupling , am gasket valve to pipe , an gasket at pipe and below connectors , ao gasket fan drive to support , ap gasket fitting to fan drive , aq gasket elbow to after cooler , ar gasket air elbow turbo , as gasket housing to support , at gasket cylinder block to turbo support , au gasket cylinder block to gear casing free end lower , av gasket armoured , aw gasket armoured , ax gasket armoured , ay gasket water connector , az gasket fuel oil pump face plate , aaa gasket flex coupling 3 , aab victaulic gasket 3 , aac gasket for bearing housing tacho gen

State Government

CTN :40223011

04 Jun, 2025 1.19 Lacs

Multi City - Telangana

Tender For corrigendum : supply of spares for etp, transformer yard and blowdown sump pumps -, screw for locking bolt, material: aisi 304, sl.no: 10, for varat make de-water pumps. model no.: 65vws6. pump, sl. no. 3786-3793, lock nut for bearing, pump sleeve, material:ss 410,sl.no:19, for varat make de-water pumps. model no.: 65vws6.pump, sl. no. 3786-3793, grub screw for locking bolt (ss 304 ), sl.no as per cross sectional, drawing- 07, drawing no: vp/c, d/vws/12873/08-3, for pump model :65vws-1, shaft sleeve (ss 410 ), sl.no as per cross sectional,drawing-10,drawing no:vp/c, d/vws/12873/08-3, for pump model : 65vws-1, lbh bush (is: 318 gr ii ), sl. no as per cross sectional, drawing-13, drawing no:vp/c, d/vws/12873/08-3, for pump model: 65vws-1, coupling pin and bush (steel/rubber), sl.no as per cross sectional, drawing- 37, drawing no:vp/c, d/vws/12873/08-3, for pump model: 65vws-1, grub screw (steel ), sl.no as per cross sectional, drawing-38, drawing no:vp/c, d/vws/12873/08-3, for pump model: 65vws-1, lower brg. housing bush,for pump model:65vws-5,drawing no:vp/csd/vws/12873/08-1, pin/bush for coupling,for pump model:65vws-5, drawing no:vp/csd/vws/12873/08-1, pin/bush for coupling, for pump model:100vws-1,drawing no:vp/csd/vws/12873/08-4, pin/bush for coupling,material:is: en-8/rubber, sl.no: 34, for varat make de-water pumps. model no.: 65vws6.pump, sl. no. 3786-3793, pump and motor coupling, key for pump shaft, material: steel, sl.no:35, for varat make de- water pumps. model no.: 65vws6. pump, sl. no. 3786-3793, key for motor shaft, material: steel,sl.no:36, for varat make de- water pumps. model no.: 65vws6. pump, sl. no. 3786-3793, oil seal for l.b.h, material: neoprene rubber,sl.no:38, for varat make de-water pumps. model no.: 65vws6. pump, sl. no. 3786-3793, oil seal cover for l.b.h, material: is: 210 gr. fg. - 200, sl.no:39, for varat make de-water pumps. model no.: 65vws6.pump, sl. no. 3786-3793, oil seal (neo- rubber), sl.no as per cross sectional,drawing- 14, drawing no: vp/c, d/vws/ 12873 / 08-3, for pump model :65vws-1, oil seal cover ( is : 210 gr fg 200 ), sl.no as per cross sectional, drawing- 16, drawing no:vp/c, d/vws/12873 /08-3, for pump model : 65vws-1, oil seal for l.b.h, for pump model: 65vws-5, drawing no:vp/csd/vws/12873/08-1, oil seal cover for l.b.h, for pump model: 65vws-5, drawing no:vp/csd/vws/12873/08-1

Central Government/Public Sector

CTN :40345406

03 Jun, 2025 NA

Vellore - Tamil Nadu

Tender For corrigendum : supply of t-union tr12-12-10zl71 stainless steel , straight coupling so 51124-10-1-2d ss , hex coupling ad hc 50- 1/2-1/2 ss , blanking plug buz12l71x stainless steel

CTN :40458265

03 Jun, 2025 4.43 Lacs

Ranchi - Jharkhand

Tender For making hollow shaft cover, input shaft covers, intermediate shaft cover, steel coupling and coupling bolt, nut and rubber bush of crusher gear box of elecon feeder breaker of dakra ocp, nk area

corporations/Associations/Others

CTN :40363567

12 Jun, 2025 2.09 Lacs

Koderma - Jharkhand

Tender For procurement of various spare parts of portable fire extinguishers at ktps dvc - rubber washer for cap assembly of mechanical foam extinguisher of 9 ltr. capacity (as per is 10204:2001) , discharge tube with washer, mini fmb for 09 ltrs m/foam extinguisher , discharge tube with foam making branch for mechanical foam extinguisher of 50 ltr. capacity (as per is 13386:1992) , discharge tube with washer (complete set) for dcp kgextinguisher 05/06 , discharge tube for co2 extinguisher of 9 kg. capacity (as per is 2878:2004) , discharge tube with branch for dcp 50 kg extinguisher , discharge tube complete with connector hand grip & discharge horn for co2 extinguisher of 4.5 kg. capacity. , discharge tube complete with connector hand grip & discharge horn for co2 extinguisher of 22.5 kg. capacity. , rubber washer for suction hose female coupling of 100 mm dia. (as per is 3549-1983 (reaffirmed 2012);, rubber washer for discharge tube of co2 extinguisher of capacity 4.5/09/22.5 kg , rubber washer for cap assembly of water type extinguisher of 9 ltr. capacity (as 940:2003) per is , discharge tube for water type extinguisher of 9 ltr. capacity (as per is 15683:2006) , safety clip shall be so designed that it shall be compatible to fit and lock the movement of knob of cap assembly of all type and capacity of dcp,foam and water type fire extinguishers made as per is :15683:2006 it shall be made of steel (grade-1 of is:2507-75). , wheel carriage assembly for dcp extinguisher of 75 kg. capacity , connecting tube shall be made of copper as per is-, 10658/1999.connecting tube shall be fitted with swivelling joint as connector at two ends to connect intake plug of 50 kg dcp extinguisher at one end and discharge plug of 2 kg co2 extinguisher on the other end.

Coupling Element Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

State Government

Central Government/Public Sector

corporations/Associations/Others