Latest cr sheet sale Tenders | Government cr sheet sale Tenders

Central Government/Public Sector

CTN :39602058

10 Mar, 2025 1.20 Lacs

Dhanbad - Jharkhand

Tender For providing and laying profile sheet roofing at small shed at community centre durga mandir at kuya colliery under bastacolla area

Central Government/Public Sector

CTN :39601936

26 Mar, 2025 15.43 Lacs

Sambalpur - Odisha

Tender For changing damage profile sheet and false ceiling at sales accounts section of sales and marketing department of corporate office, mcl hq.

CTN :39574649

26 Mar, 2025 78.53 Lacs

Jaipur - Rajasthan

Tender For supply of propeller type ac ventilating fans - exhaust fans (v2) as per is 2312 (q2) , electric ceiling fan with bldc motor (v3) isi marked to is 374 (q2) , led street light 120 w having microwave motion sensor the fixture would have an efficacy of 135 lpw as system efficacy and 175 lpw as chip efficacy ip 66 , led light 72 w post top victorian look suspended mounting arrangement to be mounted on poledo fuse element 11kv 5 amp , led bollard ufo shape 2 feet height 10 w , supply only 5 star 1 point 5 ton hi wall split units indoor outdoor complete with cordless remote control unit and with cooling and heating function of capacity complet connected accessories , supply only electric water heater storage type steel body with copper inner tank and heating element up 2 kv capacity 25 litre bee 5 star , supply only water cooler fully stainless steel electric driven single phase having approx storage and nominal cooling capacity of 40 divide 80 ltrs per day complete , smart led street light endprlplussl 120 watt led 730 pasytopic micr sensor base operation detection range 10 metre light , led street light endprlplussl 120 watt led 730 pasytopic micr sensor base , supply only 12 volt 65 ah sealed maintenance free battery for 30 kva online ups installed at hq swc bldg , wall mounting fancy lightfitting 9 watt complete , lt 1 point 1 kv cable and termination joint 3 point 5 core 25 to 50 sqmm , lt 1 point 1 kv cable and termination joint 3 point 5 core 70 to 120 sqmm , lt 1 point kv cable and termination joint 3 point 5 core 185 sqmm , exhaust fan iron body of size 300 mmvolt single phase , xlpe cable joint ht of size 150 sqmm 3 core straight through joint for 11 kv , xlpe cable joint ht of size 185 sqmm 3 core outdoor end termination type , shaivi pipe supporting clamping system s4 channel 10 feet 1 nos profile bracket 3 to 2 nos ubolt rm 4mm to 1 nos zinc coated nails , shaivi pipe supporting clamping system s4 channel 10 feet 1 nos profile bracket 3 to 1 nos ubolt rm 75mm 1 nos zinc coated nails , shaivi pipe supporting clamping system s4 channel 18 feet 1 nos profile bracket 3 to 2 nos ubolt rm 20mm 4 nos zinc coated nalis 4 nos , heating element 1 point 5 kw large tringle cup type , led spot light 9 watt complet set , heating element 1 point 5 kw round cup type , glass pane pin headed 4mm thick 4 x 3 sheet , glass pane plane 4 mm thick 4 x 3 sheet , galavnised mild wire mess 0 point 90x 15 mtr tube , forged valve 15mm bore half turn , looking mirror 18x 15 mm with plastic frame , lighting arrestors for 33 kv heavy duty set of 3 pc , glavanise wiremesh 5mm dia wire average width 1 point 14 mm wire mesh width 1 point 12 mtr and 50 feet long , straight through joint for xlpe cable 11 kv of 95 sqmm , lt straight through joint 70 to 95 sq mm , indoor end joint 70 to 95 sqmm , straight through joint for xlpe cable 11 kv of 120 sqmm

CTN :39581267

12 Mar, 2025 5.70 Lacs

Jhansi - Uttar Pradesh

Tender For replacement of old gi sheet with profile roof sheets of mess at jawahar navodaya vidyalaya baruasagar distt. jhansi (u.p.)

corporations/Associations/Others

CTN :39583827

11 Mar, 2025 7.95 Lacs

Kanpur - Uttar Pradesh

Tender For zone 1 ke antargat express road rain basera ke khule bhutal par profile sheet lgane avm gadde, takhat v kambal ki apurti ka kaam

Central Government And Public Sector

CTN :39566607

17 Mar, 2025 14.89 Lacs

Agra - Uttar Pradesh

Tender For emergency repairs to the complex of the itimad-ud-daulla tomb, agra -supply of materials - repair charges for 0.85 m height old m.s. iron grill with whereas required 40x40x6 mm angle iron frame & 10 mm square bar including straightining, cutting, welding etc. including primer & painting etc. complete in all respect. (rate including g.s.t.), fixing charges for old 0.85 m height m.s. iron grill from the boundary wall with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-iii) having size of 2.00 nos post (0.30x0.30x0.30) m including required labour & t&p. etc. (rate including g.s.t.), taking out / removal of fallen brick work in lime mortar old mughal brick manually including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. (rate including g.s.t.), earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (rate including g.s.t.), providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia m.s. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with m.s. tubes, m.s. tube challies, m.s. clamps and m.s. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .the scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of engineerin-charge .the elevational area of the scaffolding shall be measured for payment purpose .the payment will be made once irrespective of duration of scaffolding. (rate including g.s.t.), structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete required for proper completion of work as per direction of engineer incharge. (rate including g.s.t.), providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per is:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineerin-charge. the sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55 mm) with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (rate including g.s.t.), providing and laying in position cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) of specified grade excluding the cost of centering and shuttering. as per direction of engineer-in-charge. (rate including g.s.t.), brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand). (rate including g.s.t.), providing of 12 mm cement plaster on wall of mix : 1:4 (1 cement: 4 fine sand) including labour and material etc. (rate including g.s.t.), supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads &

Central Government/Public Sector

CTN :39559045

11 Mar, 2025 NA

Lucknow - Uttar Pradesh

Tender For making a room for almirah storage with g.i. profile sheet roofing at iiird floor roof for doordarshan at lucknow.

State Government

CTN :39575512

12 Mar, 2025 29.67 Lacs

Delhi - Delhi

Tender For annual repair and maintenance of to nrb at old secretariat, delhi during 2024-25. (sh providing and fixing false ceiling in cm office front corridor, profile sheet and water proofing works )

Central Government/Public Sector

CTN :39549436

17 Mar, 2025 NA

Trivandrum - Kerala

Tender For supply of safety strap for lhb type bio tank as per rdso drawing no. cg - 18116 (03 three items in a set), (1) bend sheet 2 x 100 x 2278 mm (2) bend sheet 2 x 100 x 2457mm. (3) rubber profile, as per icf drawing no. icf/sk3-6-3-201-warranty as per irs conditions. [ warranty period: 30 months a fter the date of delivery ]

State Government

CTN :39546528

10 Mar, 2025 NA

Jabalpur - Madhya Pradesh

Tender For sanitary items, motor and pump and green net for nusery. - motor and pump items, 7.5 hp submersible pump (kirlosker, crompton, cri or equivalent (isi marked), 7.5 hp starter (isi marked)with current and voltage meters, 5 hp submersible pump (kirlosker, crompton, cri or equivalent (isi marked), 5 hp open well monoblock pump 2.5"x2", ac motor, 3 phase, 2900rpm, 9-10 (kirlosker, crompton, cri or equivalent (isi marked), 5 hp starter (isi marked)with current and voltage meters, ci gate valve 65 mm (isi marked), ci non return valve 65 mm (isi marked), gi band 65 mm (isi marked), gi union 65 mm (isi marked), gi 6 meter pipe 2.5" (isi marked), electric 3 phase main switch - 63 amp anchor/havells (isi marked), premium quality (isi marked) strong build electric panel for pump house metal 4x8 feet ready for electric componets fitting, armored cable 4.0c 25mm isi (4 core) aluminium wire (model-kia/anchor/ polycab/ havells /rr), green net house items, green shade net 75% shade 3m x 50m, profile lock with zigzag spring, uv sheet standard quality 200 micron (isi marked), sanitary & hardware items, damp proof asian/nerolac/indigo, garden pipe (hose pipe satak) - 3/4" isi marked, hdpe black roll coil pipe 2" (isi marked), plywood 18 mm, 8x4,century,greenply isi marked, plywood 30 mm, 8x4,century,greenply isi marked, plywood 9 mm, 8x4,century,greenply isi marked, rcc hume pipe (np3) 300mm, termite proof solution, one pc sute sanatiary commode (model- cera/johnson/hindware/sumani), misc. items, office chair ornate lacquered finish black colour with red cusion, office chair - revolving - orthopedic- premium quality -adjustible seat - cushioned seat and arm-rests, flex star quality black back, banner flex star quality, irrigation material, pvc irrigation pipe is -4985 75mm, working pressure 4kg/cm2 6m, pvc irrigation pipe is -4985 63mm, working pressure 4kg/cm2 6m, tube od 16 mm cl2 linear low density polyethylene (lldpe) -is-3395, mini sprinkler mi spr red 85 lt 1.20 m rod ass smst 8mm extention tube 1.2 m with assembly, poly grommet take off 16 mm x 13mm (material - high quality plastic or rubber ), j- turbo aqur /line joiner 16mm, working pressure 1kg/cm2 (material - high quality plastic or pvc ), lateral end stop "8" shape for 16 mm tube (material- pvc), mini valve 16mm x 16mm, (material- hdpe), barbed poly tee 16 mm diameter (material- pvc/hdpe), barbed elbow 16 mm diameter (material- pvc/hdpe), double acting air/ vacuum release valve for 1" connection size (material- pvc/hdpe), flush valve 63mm outer diameter, working pressure 6kg/cm2 (material- pvc/hdpe), control valve, size 63mm outer dia., molded seal plain, double union (material- pvc/hdpe) pn10, pvc non return valve, size 75mm dia., plain, double union (material- pvc/hdpe) pn 10, elbow (euqal) 63 mm hd 10 kg, dis/sis elbow (euqal) 75 mm hd 10 kg, tee (equal) 63 mm- hd 10 kg, tee (equal) 75 mm- hd 10 kg, male thread adapter 63 mm (11/2) - hd 10 kg, dis/sis j- ghoomer 5o m3/hr90 mm w ss clamp pn-10, dis/sis j- s flow 4o m3/75 mm discln pn-10, fm thread adapter 63mm (11/2) hd 10 kg, teeflon tape, perma fix 1 l - ti

Cr Sheet Sale Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors