Latest crane weigher Tenders | Government crane weigher Tenders

CTN :40662627

25 Jun, 2025 1.50 Lacs

Multi City - Karnataka

Tender For laying concrete from a compound near the weight bridge at swm site (1.50)

State Government

CTN :40534123

09 Jun, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For corrigendum : supply of c.i./c.s. casted item - c.i. casted items on new basis, c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling different size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, c.i. casted items (on conversion basis), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling difrent size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, cast steel spur gear & pinion new basis, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c.s.sproket-36 teeth for duplex chain 2 1/2" pitch material 2708 drg no ksc/boiler-163, c.s. sprocket 17 teeth for duplex chain 2 1/2" pitch material 2708 drg no-ksc/mill/4887, opertuinity device of trash turner beam material-ss drg no. mills-8488, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-10, fw-110mm od-260mm bore-50mm, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-8, fw-120mm od-208 mm bore-50mm, c.s.worm shaft ( as per sample) for mill, c.s. mill coupling (weight 700kg approx) as per drawing, c.s. mill crown pinion 16 teeth (weight 1500 kg.) as per drawing, cast steel spur gear & pinion on conversion basis, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) ma

State Government

CTN :40577066

23 Jun, 2025 NA

Dibrugarh - Assam

Tender For supply installation and commissioning of various equipment for the ug and pg laboratories of the department of physics, dibrugarh university - study the motion of a spring and calculate (a) spring constant. (iron weight), low resistance by carey foster s bridge, gouys method with digital weight scale, study of b-h curve with deep, plancks constant by led, zeeman effect experiment kit, stefan s constant experiment kit, the boltzmann constant using v-i characteristics of pn junction diode, michelson interferometer kit (with diode laser), newtons rings experiment kit, fresnels bi prism experiment kit (with sodium source), polarimeter experiment kit (polarization), elastic constants of a wire by searle s method(without telescope), meldes experiment kit, theboltzmann constant using v-i characteristics of pn junction diode, decade condenser box 0.01mf to 0.11mf, decade condenser box 0.001mf to 0.01mf, decade condenser box 0.01 f to 1 f, fet characteristics, zener regulated power supply, mosfet characteristic, digital to analog converter, study of flip-flop, ac millivoltmeter, transistor tester, e/m apparatus magnetron valve method, e/m apparatus bar magnet method, milliammeter (0-1) ma, (0-10) ma, (0-100) ma, determination of j experiment, hydrogen spectrum, to determine the coefficient of thermal conductivity, mercury light source with choke and wooden box, sodium lamp with transformer and wooden box, bnc to crocodile clip cable, breadboard wire, 12v centre tap transformer, 9v centre tap transformer, ic-741, ic-555, lm-341, ic-7400, ic-7402, ic-7486, ic-7805, ic-7812, ic-7912, ic-7404, ic-7401, bc-107b, bc-547, capacitor-pf-103, capacitor-pf-104, banana cable, fuse holder, led holder, on/off switch-2pin, milliammeter (1-10) ma, microammeter (1-100) microampere, multimeter, 100mhz dso (ds1102z-e), 25mhz awg (dg-822), 100mhz dso (dho-814)

Central Government/Public Sector

CTN :40577282

13 Jun, 2025 1.34 Lacs

Sonbhadra - Uttar Pradesh

Tender For mechanical maintenance of weight bridge 1 and 2 of kakri area as and when required basis for one year

Central Government / Public Sector

CTN :40539427

23 Jun, 2025 NA

Sambalpur - Odisha

Tender For supply of bridge testing kit:- inspection tools consists of: (1).rivet testing hammer 310 mm long & we ight 110 grms (2). magnifying glass 100mm (3). freeman`s pocket steel tape with bubble & belt clip 3 met er long. (4). freeman`s glass fibre tape 30 meter long. (5). precision rail welding straight edge as per is-22 20-1990 with centre knotch & handle 1 meter long. (6). aluminium sounding rod 4 meter long extendable t ype. (7).tilting mirror (convex) (8). inside calliper 10 inch long measurement range: 0 to 10-11/16 in. (9). o utside calliper 10 inch long measurement range: 0 to 10 in (10). prismatic binocular (olympic/nikon)- falco n 10 x 50 or similar 10x zoom (11). shim feeler gauge 4 inch having 10 leaves of 0.05mm to 0.80mm. = 0 2 nos. (12). chisel = 02 nos. (13). safety belt (14). safety helmet as per is:2925 (15). bridge cam welding gauge. size(mm)-0-60, angle-60 ,70,80,90 to take accurate reading of welding of steel welded girders. (16) . heavy duty laser plumb bob with hook string and runner (17). standard wire gauge (18). optical crack m easuring microscope (19). concrete test hammer measuring range 10 to 70 n/mm?, impact energy = 2.207 nm (20). digital coating thickness gauge for ferrous metals, measuring range 0-1250 micron (21). laser ta rgeting distance meter for measuring distances is as bridge heights and hard to reach objects range up to 30 meter. (22). led torch (23). plaster of paris in case (24). red paint with brush and thinner (25). chalk m arker (26). piano wire 30 meters length (27). chipping hammer (28). spirit level with two bubble (29). tds meter digital spec: 0.19-990 ppm (30). chloroscope (chlorine test kit)drinking water testing kit, hardnes s, ph range, chloride, fluoride, nitrate turbidity test, weight of master kit 3kgs. approx) (31). thickness gau ge (32). wire brush (33). good quality protective gloves & eyewear (34). rebound hammer (35). nicely fini shed storing and transportation box and case for keeping above items with all relevant items from srl no 1 to 35. with all relevant items from sr no 1 to 35. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40459620

09 Jun, 2025 NA

Kazipet - Telangana

Tender For supply of transportation of 65 nos. loco wheels of 3-ph wap-7, drawing no. 1209-01-111-070 from nhava sheva/mumbai to smm/els/kzj/scr - kazipet, under kadipikonda bridge, warangal, telangana, total weight: 36.72 mts. ]

Crane Weigher Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector