Web Analytics Made Easy - StatCounter

Crank Bed Tenders

Get complete information related to latest Crank Bed Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Crank Bed Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Crank Bed Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

CTN :39581288 Due date: 20 Mar, 202520 Mar, 2025 10.64 Lacs
Tender For supplying of materials for sajivini shed in agrahara lakshmi pura grama gonibidu gp - portland cementqnt, dry distemperqnt, plastic emulsion paintqnt, coarse sandqnt, water proofing materialsqnt, pvc edge beadingqnt, display board qnt, plasticizer super plasticizer qnt, binding wire qnt, c i manhole cover with frame qnt, table moulded bricks of class designation 50 qnt, border tiles 30 x qnt0 cms qnt, m s rods qnt, polyenthylene water storage tank of specified capacity l qnt, glazed tiles 300x450 qnt, alluminium handles qnt5 mm qnt, alluminium tower bolt 20 cm qnt, aluminium window frame section qnt 20 mm thick qnt, bond stone 20 x 20 x 45 cm qnt, boulders qnt, brass stop cock qnt, broken stone aggregate qnt2 mm to qnt0 mm size qnt, broken stone aggregate 20 mm size qnt, broken stone aggregate 40 mm size qnt, burnt bricks class 35 qnt, cp brass chain with plug qnt, cp brass waste 32 mm of standard pattern qnt, casurina poles qnt00 qnt50mm qnt, casurina poles 75 qnt00mm dia, ceramic tiles of size qnt 30 x 30 cms, chrominum plated screws qnt, cleat angles qnt, corbon electrodes qnt, enamel metal paint qnt, granite metal 20 mm qnt, granite metal 40 mm qnt, granite trap broken metal qnt00 mm and down size qnt, honne wood qnt, honnewood planks for panels 20 mm thick qnt, jungle wood runners and planks qnt, lead or pvc connection pipe 32mm dia for wash basin qnt, mangalore tiles first class and special tile for ridges and hips qnt, mathi nandi wood planks for panels 25 mm thick qnt, nylon rollers qnt, ready mix primer paint ready mix red lead paint qnt, rubber beading for shutters beading qnt, silver oak or equivalent planks 38 mm thick qnt, size stone 20 x 20 x 25 cms qnt, tmt bars fe 500 qnt, whitening qnt, mr9609 add qnt, c i m s brackets for flushing cistern qnt, brick bats 25 to qnt00 mm qnt, unit cost as per the specification qnt, ms flat qnt, bolts and nuts qnt, rcc cap qnt000 mm diaqnt00 mm thick qnt, anchor bolts 750mm qnt, base plate base plate qnt, brick bats 25 to qnt00 mm qntqnt, copper plated brass piller tap qnt5mm qnt, gusset plates 6 mm thick qnt, ms angle iron 40mm x 40mm x 6mm 23 metre in length at 3 5 kgs per metre qnt, ms angle iron 50mm x 50mm x 6mm 33 8 metre in length at 4.5 kgs per metre qnt, vitrified tiles 600x600 mm qnt, white vitreous china clay flat back wash basin size 630x450mm qnt, indian type water closet of size 580 mm of specified make with footrests qnt, cost of 6 5mm m s coil qnt, fabrication charges qnt , pvc pipe of 4kgs cum 63mm qnt, ser1 labour charges for lifting and placing in position and making connection at 7 on material ser1, ser1 handling loading and unloading 3 on material ser1, ser1 fabricator ser1, ser1 fitter class i ser1, ser1 welder grade i ser1, ser2 add brush putty sand paper roller at 5 on cost of paint ser2, ser1 add cutting and other wastage 5 ser1, ser2 add handling loading and unloading at 1 on material ser2, ser2 add handling loading and unloading at 2 on material ser2, ser2 add hom of welding and grinding machine 2 on material ser2, ser2 add hom of welding and grinding machine 4 on material ser2, ser1 add providing and removing scaffolding at 3 on labour ser1, ser1 add sundries charges at 1 on material ser1, ser1 add sundries charges at 2 on material ser1, ser1 add watering charges at 1 on material ser1, ser2 add watering charges at 2 on material ser2, ser2 tools & plants and electrical charges 2 ser2, ser2 transportation charges of materials beyond 5 km10 ser2, ser1 labour charges for handing errection of rcc rings etc ser1, ser1 stone chistler class ii ser1, ser1 painter class i ser1, ser1 mason class ii with tools ser1, ser1 mason class i with tools ser1, ser1 hom of cutting and grinding machine ser1, ser2 hom of vibrator 0 71 days ser2, ser1 hom of welding and grinding machine ser1, ser1 mixer concrete small used in culvert ser1, ser1 mixer concrete 1 cum capacity ser1, ser1 licenced plumber with tools ser1, qnt50 mm thick plain glass

State Government

CTN :39572057 Due date: 26 Mar, 202526 Mar, 2025 NA
Tender For supply of reception counter , coffee table , l-shape sofa set , television unit , led tv unit , double decker bed , wardrobe , dining table , double decker bed , bed with storag , writing table , bed with storage , writing table with drawer box and side table , file cabinet with display unit , director chair , visitor chair , storage cabinet , conference table 6 seater , wooden chair with cushioned seat , working table low height partition , revolving chair , 4 seated bench , platform for stage with carpeting , display cupboard glass front , stainless steel table for packing , curtains with fittings and accessories and labour charge

CTN :39517000 Due date: 21 Mar, 202521 Mar, 2025 NA
Tender For supply of tkt panelling in ceiling 30x20 , procurement of installation of 24 inch led ceiling lights with electrical , procurement and installation roller blinds 5x5 sqft , naval aviation themed texture painting , wall painting putty with 2 costs of putting with emulsion , fabrication and installation of wall mounted tv unit , fabrication and installation of wall mounted show case , aluminium partition with doors 12 x 8 x 3 , flooring vinyl lamination sheet 30x20 , wooden round table and 6 nos chairs , refurbishment of seats upholstery work and polishing , fabrication and installation of uniform hanging cabinet 6x2 with partition for various uniforms , fabrication and installation of door tally 1 and half feet x 2 feet , labour charge

CTN :39491742 Due date: 07 Mar, 202507 Mar, 2025 33.31 Lacs
Tender For gsb wbm work ward no. 26 to 55, dausa. - providing, laying, spreading and compacting of granular sub-base by providing close graded material (table 400-1), spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with vibratory roller to achieve the desired density, complete as per mort&h specification clause - 401 including all material, labour, machinery, lighting, guarding and maintenance of diversion., grading - iii material, coarse graded granular sub-base material 53 mm to 26 .5mm, carriage of materials (by mechanical means) stone, boulders, gravelly material 5 km, dressing of earth work in surface excavation including cutting and filling upto 30cm depth including disposal of excavated earth upto 50m and lift upto 1.5 m., construction of embankment with approved material obtained from borrow pit with all lifts and leads, transporting to site, spreading, grading to required slope and compacting by vibratory roller 8-10 tonne to meet requirement of table 300-2 including cost of compensation for earth taken from private land complete as per mort&h specification clause 305. (lead taken upto 5 km), random rubble masonry with hard stone in foundation and plinth : cement mortar 1:6 (1 cement : 6 coarse sand), providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)drain work, providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level :1:4:8 (1 cement : 4 fine/ coarse sand : 8 graded stone aggregate 40 mm nominal size)., providing at site, lowering & laying in trenches, aligning & jointing of rcc pipes np3 class (with s/s ends) is: 458 - 1988 (amended up to date) marked and pipes from 300 mm upto 2000 mm manufactured through vertical / vibrated casting process all levels with rubber gaskets (epdm/sbr) for sewer lines as per is: 5382 (including cost of rubber gaskets lubricants) as per drawing, sectional hydro testing of the sewer pipe line (including cost and conveyance of water to site for testing) etc., complete as directed by engineer. note : e/w to be measured and paid separately. length of pipe shall be measured in between the outer wall of two manholes / inspection chambers. pipe in the manhole/inspection chamber s wall shall deemed to be included in the item of manhole/inspection chamber shall not be payable., 450 mm internal diameter, 600 mm internal diameter, hydraulic excavator of 1 cum bucket (with deasel, driver & helper)

CTN :39361666 Due date: 03 Mar, 202503 Mar, 2025 50.00 Lacs
Tender For w no 14 different works-, earth work in excavation for roadway, including trimming bottom and side slopes in accordance with requirement of line, grades and cross sections, including disposal of surplus material with all lift and lead upto 1000 metre as per mort&h specification clause 301.in all type of soil, carriage of materials bymechanical transport including loading,unloading and stacking :: earth for 1 km, providing and laying lean cement concrete 1:4:8 in sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length onstruction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid manualy, ompacting with surface vibrator, finishing and curing complete as per clause 601, 112 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion., providing and laying un-reinforced, plain cement concrete mix with concrete mixer & vibrator pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate conforming to is: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed as per approved mix design, laid, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints etc including all material, labour, machinery, lighting, guarding and maintenance of diversion. 9.6.1 pcc m-20, providing, lowering, laying in trenches, aligning, fixing in position and jointing socketed rubber gasket type isi marked upvc pipes of class iii (6 kg/sqcm) suitable for potable water with rubber ring joints (as per is 4985-2000) of following outer dia with all accessories (excluding specials) complete including all material, labour, hydraulic testing and commissioning as per technical specifications and as per direction of engineer., providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in-charge. exposed on wall 20 mm nominal outer dia .pipes., earth work in excavation in foundation, trenches etc. includingdressing of sides and ramming of bottoms, including getting out theexcavated material, refilling after laying pipe/ foundation anddisposal of surplus excavated material at a lead upto 50m suitablesite as per direction of engineer for following depths, below naturalground / road top level. in all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. depth upto 1.5 m, carriage of materials bymechanical transport including loading,unloading and stacking :: earth for 1 km, providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level code) 1:4:8 (1 cement : 4 fine/ coarse sand : 8 graded stone aggregate 40 mm nominal size)., "providing and laying in position cement concrete of specified gradeexcluding the cost of centring and shutteringt - all work upto plinth level1:1:3 (1 cement : 1 coarse sand : 3 graded stone aggregate 20mm nominal size)", 40 mm thick fine dressed stone flooring over 20 mm (average) thickbase of cement mortar 1:5 (1 cement : 5 coarse sand) includingpointing with cement mortar 1:2 (1 cement : 2 stone dust) with anadmixture of pigment to match the shade of stone.30.27.1 red sand stone, providing and fixing of reinforced ferro-cement drain covers designed for 'a' class loading duly marked on co

CTN :39391363 Due date: 10 Mar, 202510 Mar, 2025 NA
Tender For multipal work - class room student chair and table complate set, office almira, office locker, ofice sofa, office invertor, invertor battery, 2 kva -96 fm invertor, 5 mp cctv caera, 5 mp cctv ip canera, 28 watt led tube light, 2 tb hard disk, 16 channel dvr box, poe switch 8 port, 12 watt dc 5 amp power supplay, cat 06 havy cable, 6 mtr solar pole with light with installation, labour depending or work visit site, 1200 mm copper fan 3 blade, 20 watt led tube light, good quality tap, center table for office use

CTN :39487539 Due date: 04 Mar, 202504 Mar, 2025 33.31 Lacs
Tender For gsb & wbm work ward no. 26 to 55, dausa.-, providing, laying, spreading and compacting of granular sub-base by providing close graded maternal (table 400-1), spreading in uniform layers with motor grader on prepared surface, mixing by max in place method with rotavator at omc, and compacting with vibratory roller to achieve the desired density, complete as per mort&h specification clause 401 including all material, labour, machinery, lighting, guarding and maintenance of diversion, , grading-iii maternal, , coarse graded granular sub-base material 53 mm to 26.5mm, , carriage of materials (by mechanical means) stone, boulders, gravelly material 5 km, , dressing of earth work in surface excavation including cutting and filling upto 30cm depth mcluding disposal of excavated earth upto som and lift upto 15 m, , construction of embankment with approved material obtained from borrow pit with all lifts and leads, transporting to site, spreading, grading to required slope and compacting by vibratory roller 8-10 tonne to meet requirement of table 300-2 including cost of compensation for earth taken from private land complete as per mort&h specification clause 305 (lead taken upto 5 km), , random rubble masonry with hard stone in foundation and plinth cement mortar 16 (1 cement 6 coarse sand), , providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering all work upto plinth level 124 (1 cement 2 coarse sand 4 graded stone aggregate 20 mm nominal size), , drain work, , providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering all work upto plinth level, , 148 (1 cement 4 fine/coarse sand 8 graded stone aggregate 40 mm nominal size), , providing at site, lowering & laying in trenches, aligning & jointing of rcc pipes np3 class (with s/s ends) is. 458-1988 (amended up to date) marked and pipes from 300 mm upto 2000 mm manufactured through vertical / vibrated casting process all levels with rubber gaskets (epdm/sbr) for sewer lines as per is 5382 (including cost of rubber gaskets lubricants) as per drawing, sectional hydro testing of the sewer pipe line (including cost and conveyance of water to site for testing) etc., complete as directed by engineer note e/w to be measured and paid separately length of pipe shall be measured in between the outer wall of two manholes /inspection chambers. pipe in the manhole/inspection chamber's wall shall deemed to be included in the item of manhole/inspection chamber shall not be payable., , 450 mm internal diameter, , 600 mm internal diameter, , hydraulic excavator of i cum bucket (with deasel, driver & helper)

Central Government/Public Sector

CTN :39489927 Due date: 10 Mar, 202510 Mar, 2025 9.35 Lacs
Tender For repair and maintenance of godrej furniture - spares for chairs, gas spring cs c45 or en80 28mm , spares for chairs, armrst pu d type h64 , spares for chairs, armrst pu 700012 sngl h6 , spares for chairs, 7002 grt mech m002 low tilt , spares for chairs, pn cyl sg act 4mm 0mm 1mm 0 10 , spares for chairs, caster swivel 38mm disc regal , spares for chairs, hw onst pch7003 pch7003 , spares for chairs, st leo armrst tp pad , spares for chairs, pp back cvr pch700234d 90034 , spares for chairs, bracket st bk conn paintd ms , spares for chairs, caster swivel 50mm disc black , spares for chairs, pedestal bravo chair nyl black , spares for chairs, chair fittings pch 7003 , spares for chairs, kts mechanism , spares for chairs, diva mechanism , spares for chairs, armrest adj tub-infotech pair , spares for chairs armrst asy halo 9200rx bink , spares for chairs halo m037 , locks and spares , storwel or pedestal or filing cabinet locks and spares, ic drcb stwl sm1 2br ky , storwel or pedestal or filing cabinet locks and spares, storwel lkngmechasystwwrdcen , storwel or pedestal or filing cabinet locks and spares, lock siam for-vplu , storwel or pedestal or filing cabinet locks and spares, ic stwl glass door , storwel or pedestal or filing cabinet locks and spares, ic table t8 left 2 keys , storwel or pedestal or filing cabinet locks and spares, ic table t9 pair , locks and spares, , locks and spares, cl vfc central lock , storwel or pedestal or filing cabinet locks and spares, lock vsdu kd value series , storwel or pedestal or filing cabinet locks and spares, lock siam set of 4 kd bkcase , repainting of steel cupboards with 4 shelves and replacement with new key sets as per the specification. the rate shall include labour, materials, spares etc. , repainting of steel cupboards with 3 shelves and replacement with new key sets as detailed in the specification. the rate shall include labour, materials, spares etc. , service charges or labour, for one service mechanic for one day or during office hours , service charges or labour, for one service mechanic for half day work minimum or during office hours , service charges, replace fabric upholstery pch 7001,7002,7003 seat and back

Central Government/Public Sector

CTN :39477819 Due date: 07 Mar, 202507 Mar, 2025 NA
Tender For supply of mobile coloposcope system , mobile thermo_coagulator , fetel monitor , labour table , anesthesia workstation agm and 2 vaporizer , video laryngoscope with reusable blades_adults , operating microscope , slit lamp 5 step , ot table ortho attachment , mobile full hd endoscopy camera system with freeze and recording , sinuscope_0 d , sinuscope_30 d , sinuscope_70 d , scope laryngo pharyngo_90d , dental chair and accessories

CTN :39466642 Due date: 06 Mar, 202506 Mar, 2025 NA
Tender For supply of csr medical equipment - oxygen cylinder , wheel chair , patient bed , labour table hydraulic , steel almirah , autoclave , microdebrider blades , suction machine , radiant warmer
 Loading, Please wait...

Connect us via What's Up