Latest cross arm repair Tenders | Government cross arm repair Tenders

Central Government/Public Sector

CTN :41759290

30 Sep, 2025 21.63 Lacs

East Singhbhum - Jharkhand

Tender For tender for supply of 33kv line maintenance between jaduguda and narwapahar for two years : : - replacement of 33kv pin insulator including supply of necessary fixing materials. this includes binding of acsr dog conductor also , replacement of 33kv disc insulator including supply of necessary fixing materials in existing 33kv line , replacement of 33kv cross arm including supply of necessary fixing materials , replacement of packing pieces in existing cross arms , replacement of pg clamp for dog conductor including supply of necessary fixing materials , installation of complete stay set including supply of necessary fixing materials. this includes digging of stay pits and grouting of stay rod in cement concrete foundation also as required , installation of gi wire 7/10 swg for stay including supply of necessary fixing materials , installation of gi wire 8 swg for guard wire , installation of gi wire 7/14 swg for earth wire including supply of necessary fixing materials , replacement of back clamp for cross arm & top bracket (50mm x 10mm flat) including supply of necessary fixing materials , installation of d.p. channel (100mm x 50mm x 6mm) 1 x 3 mtrs including supply of necessary fixing materials , installation of d.p. channel support clamps including supply of necessary fixing materials , replacement of earth clamps for earth wire including supply of necessary fixing materials , replacement of side stay clamp including supply of necessary fixing materials , replacement of angle stay clamp including supply of necessary fixing materials , replacement of cross bracing for d.p. structure including supply of necessary fixing materials , replacement of clamp for x-bracing including supply of necessary fixing materials , installation of earthing pit using pipe earth electrode as per drawing including connection to earth wires and supply of necessary materials required it , laying & tensioning of acsr dog conductor including fixing / binding at insulators in the 33kv line (per km consist 3 conductor of ryb phases). , tensioning of dog conductor and supporting & fixing on insulators including binding as required in the section (per km consist 3 conductor of ryb phases). , cutting and removal of hages , trimming of trees and branches of size more than 4inch dia and disposal of un-serviceable materials to ucil canteen building as per direction of eic , cutting and clearing jungle grass including uprooting of rank kegetation , long grass , bush wood , trees and saplings upto 4inch dia measured at a height of 1 meter above ground level as per direction of eic , erection of m.s. rail pole 105 lbs , 13 meters long including drilling of 2 nos holes of 5/8inch dia as required at one end of rail pole for fixing of f- clamps , installation of ab switch on double pole structure. this includes fixing of required channels and clamps and other fixing as required and for proper operation. this includes connection of dog conductor alsodog conductor also , installation of 33kv lighting arrestor on double pole completed with line and earth connections , maintenance of ab switch on double pole structure , 33kv line patrolling from narwapahar to jaduguda , replacement of earth spike along the 33kv line & connection to pole , number of rail pole with painting of pole upto 6 feet height for colour coding of line

CTN :41734670

15 Sep, 2025 12.20 Lacs

Kuchaman - Rajasthan

Tender For supplying and fixing of led street lights in municipal area kuchaman city - providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 10% humidity 10% to 90% rh working temp -5c to 45c . driver current 750ma. the luminaire shall be bis certified and trade mark certified. life expectancy equal or more than 50000 burning hrs with minimum 70% lumen maintened , cri >70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate/ report with liable warranty of product/accessories from oem shall be submitted. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsrled street light fixture with minimum lumen output 2450 lm, led street light fixture with minimum lumen output 3700 lm, supplying and drawing of xlpe insulated lt aerial bunched aluminium conductor cable confirming to is 14255/1995 and is 398 (pt-4)/ 1994 and as per discom specs. on existing cross arms through i hook with all necessary t&p required including binding and twisting etc. complete in all respect as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .1 x 25 sq. mm. + 1x25 sq. mm. (insulated), providing & fixing of street light bracket made out from following size of b class , medium class g.i. pipe confirming to is : 1239 p - 1 ( 2004 ) with heavy duty pole clamp, saddles suitable fastners etc. as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 25 mm dia, supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.90 % purity copper, class 5 stranding in acc. to is:8130/iec 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation pvc type a/c/d , flame retardant as per is 10810-53, better amperage rating as per is:3961 part 5, in existing surface or recessed pvc/ ms conduit/casing capping making connections with copper lugs of suitable size, ferrules,testing etc. as required. oem must have its own in housenabl lab setup for all testing facilities for wires. for additional technical parameters of product / work refer annexure a attached with this bsr2 x 1.5 sq.mm, providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed unarrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvcpipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have its own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work r

State Government

CTN :41698871

18 Sep, 2025 90.30 Lacs

Multi City - Karnataka

Tender For manufacture & supply of 11kv horizontal cross arms with ht st top support as per technical specification

State Government

CTN :41616524

24 Sep, 2025 4.50 Crore

Vadodara - Gujarat

Tender For dismantling existings parts of radial gate and providing, fabricating and erecting new gate leaf assembly, horizontal girders, arms assembly, wire rope, turn buckle assembly, hoist platform, cross girders, chequered plate and hand railing, hoist mechanism parts, c.d. unit base frame and e.r. unit cover, strengthening of foot-bridge of radial gate size 41 x 27 - 8 nos and repairing work of embedded parts of r.b.h.r and l.b.h.r gates as per the drawings and specifications for deo irrigation project.

corporations/Associations/Others

CTN :41578055

23 Sep, 2025 22.01 Crore

Ajmer - Rajasthan

Tender For 11 kv v cross arm with top hamper and clamp and lt cross arms 600 mm and 1200 mm with clamp

corporations/Associations/Others

CTN :40834356

23 Sep, 2025 7.55 Crore

Ajmer - Rajasthan

Tender For corrigendum : 33 kv double circuit un-galvanized steel lattice structure 42 feet long along with 3 nos. 33 kv cross arms (channel) and 48 nos. m. s. bolt with nuts complete package